I have Hp Ipaq 514 When ever i use internet sharing my phone never charges through the usb however it charges through active sync i can never complete big downloads. Because the phone turns off oh yea when internet sharing is active the device shows its charging but actualy its n0t helP any0ne
Phone stops charging when you're using Internet Sharing? but it works with the SAME CABLE in Active Sync mode?
not true
my cuz has a htc gene and it charges while internet sharing is active
Can anyone help ?
When Internet Sharing Is Active But No Data Is Being Transferd It Charges But However When Im Downloading A Big File When Therez A Data Transfer It Stop Charging But The Phone Stil Sh0ws Like Its Charging But Nothing Is Happening . Could This Be A Registry Or Device Fault
USB doesn't carry the same amount of power as a typical wall charger. It might not be enough to keep the device charged while the cell radio is going full blast for long periods of time. That said, I never have any problems staying charged when tethering over USB.
any soluti0n
my cousin has a htc p3400 and he can tether overnight and his phone will be fully charged and i had a imate sp3 b4 but i never had this problem. i think its is a firmware bug anyone else with a ipaq notice this but there was this one day it download 400mb file and it charged so i dont knw what to do . i kinda have a dodgey Edge connection i have free internet but if my phone turns of i have to wait 3 hours till its free thats why i dont want my fone turning off
When u have screen on and using data your phone is using more power then its gaining from usb port.
uhm buT
the thing is the screen is turned off wifi off bluetooth off cpu at default only internet sharing and spb battery moniter running and the battery discharges very quick while internet sharing is running
Related
Hi
Is anyone experiencing the following problem on T mobile UK or any other network? [t mobile touch plus]
Using your handset as a modem 'internet sharing' the handset will intermittently stop charging for 15 minutes, after using the connection ‘internet sharing for anything up to 30 minutes (connected to a desktop pc or laptop)
Secondly when the phone reaches 100% fully charged using the internet sharing, the handset stop charging and subsequently the phone switches to battery power and as a result you are working against the standby time, which when empty in let say just over an hour you will have to charge the phone again, before you can resume using internet sharing.
Radio version of handset is 1.58.21.24 it’s
The page results from surfing is fine on desktop and handset just the above problem and heating.
Any thoughts would be much appreciated
yes i get that isssue to on my niki on tmobile uk but its only just started doing it recently
try to soft reset it
All my devices, Qtek S100, Qtek S200, HTC Touch dual - they all stops charging in "Internet Sharing" mode.
internet sharing and charging..... the fix
does your handset stop charging then restarts after a little while using internet sharing, if so read below
a few things to check is to try internet connection on another laptop at the location where it is happening,if the fault is present then you have identified the fault is with the handset or network.
your next step is to try internet sharing at a different location from where you are experiencing the fault and see if the fault reoccurs, for me it wasn't until i decided to try internet sharing in another area that i discovered that the fault was network related, even though tmobile were adamant it wasn't (this fault is also related to cases where the handset gets very hot within a short of time whilst using hspda/gprs).
if the above test is carrried out and you identify that it's location based then speak to tmobile (but be persistant)
today my handset can sit idle or surfing for xyz and it is barely warm....
hopes it help
Hi,
Guys i just opted for Vodafone Mobile Connect ( india ) which offers connectivity through mobile. The internet sharing feature works fine from Touch and i can browse.. but as soon as the backlight goes off on my touch the internet connection is lost ( USB + Edge )...
Any help in this matter would be highly appreciated.
Thanx
well its working fine with bluetooth but it keeps loosing connectivity through USB cable
abhishek.vij said:
well its working fine with bluetooth but it keeps loosing connectivity through USB cable
Click to expand...
Click to collapse
Not sure if this would work but have you tried changing the power options ? Like not to put the phone to sleep when it is plugged-in ?
Pat123 said:
Like not to put the phone to sleep when it is plugged-in ?
Click to expand...
Click to collapse
That is working for me, however be aware that some carriers will charge the big price for using the WModem.
Bell mobility charges 15$/MB (CAD) for the data connection, the unlimited plan is only for Mobile browsing, email ... and they dont offer any package to use the WModem with the Touch phone.
hey guys i have a problem i also have vodafone connection (india) bt i cannot start my internet sharing ...plz help me
dear friend i also have similar problem please reply if u got solution
abhishek.vij said:
Hi,
Guys i just opted for Vodafone Mobile Connect ( india ) which offers connectivity through mobile. The internet sharing feature works fine from Touch and i can browse.. but as soon as the backlight goes off on my touch the internet connection is lost ( USB + Edge )...
Any help in this matter would be highly appreciated.
Thanx
Click to expand...
Click to collapse
it happen to me too
POWER SETTINGS ADJUSTMENT Reply
taker2 said:
it happen to me too
Click to expand...
Click to collapse
When I use the Internet Sharing app, my device is plugged into the computer. I have my power settings set to dim the backlight after ten minutes when plugged in and never power off. That's probably what all ya'all's problem is.
Good Luck.
- 2 Bunny
As if it's damaging to charge everytime the phone is connected to the pc
dan138zig said:
As if it's damaging to charge everytime the phone is connected to the pc
Click to expand...
Click to collapse
No, you just might not want to charge your phone for the sake of transfering one or two files via USB, or you might be logging battery life. There are many different reasons.
... Or simply you want to save the battery life of your laptop while sharing your internet connection via usb...
Hey
I've noticed a few people with this issue however they have been using different devices/computer setups therefore I wanted to see if anyone knew how to solve my issue.
I recently got a HTC 7 Trophy and love it, however I am dying to try out this wireless sync feature but it never seems to trigger and show up in zune as connected.
My Setup:
HTC 7 Trophy sitting on charge on one side of my room, connected to my wireless
Lenovo S10e Netbook running Windows 7 Ultimate with Microsoft Security Essentials AntiVirus
Netgear DGN2000 with WPA2-PSK encryption
when i wake my phone from sleep, the wireless is still connected but it has never shown up in zune. (yes I have setup wireless sync in zune and it successfully completed without errors)
what happened for me...
it specifies when setting up wireless sync that you need to have your phone connected to charger (not usb power from computer)for 10 minutes then wireless sync will start.
it took a good 25 minutes for me and then i noticed a driver being installed into windows 7. Zune then proceeded to being wirelessly syncing..
under device manager i've found
Portable Devices / LEO70 (its my hd2 running wp7)
under properties- device description - Value=Zune Wireless
hope this enlightens something
thanks! I'll leave my phone on charge for the whole day and check device manager every 30 minutes or so, now I just have to figure out why my phone isn't connecting to my home WiFi anymore
UPDATE: Still nothing, the phone has been on the network and charging all day without any drop outs and still not showing in zune, I have restarted my laptop once during the day because of windows updates but still nothing. I will try turning off windows firewall next to see if that is the problem.
UPDATE 2: It installed the driver, once, when I awoke the laptop from sleep with zune already running. I found another 'solution' that involves enabling some services from services.msc and turning off windows firewall with no success. really wish someone had the same problem as me :/
DarkRyoushii said:
UPDATE 2: It installed the driver, once, when I awoke the laptop from sleep with zune already running. I found another 'solution' that involves enabling some services from services.msc and turning off windows firewall with no success. really wish someone had the same problem as me :/
Click to expand...
Click to collapse
to be honest, i dont see the point... during wireless sync, it has to be powered via AC adapter - disconnect power, and wireless sync stops...(now what sort of 'wireless' is that)
I know some users have docking stations but still it comes down to ...
*sync via USB - fast sync slow charge.
*sync wireless - slow sync fast charge.
You cant roam in your wireless environment and sync...
I ve got a plc adapter of d-link(DHP-P306 ).Ι had a successful internet connection in three different rooms.Suddenly.i lost connection and since then I am randomly connected,except for the pc that is in the same room with the router.I ve set up the adapters through a process that i found in various websites(pushed the safety button to synchronize adapters).But still i ve got problem( Huston)!! Is there any hint?
any thoughts?
Hi buddy
Actually I had a similar problem, and then I noticed that the PLC from D-Link have a power saver mode that, if you don't use it for a certain amount of time (mine is 5 minutes) it will cut the internet connection. For me, 5 minutes is the most moronic thing they could have done, so whenever I don't use the internet for 5 minutes, it closes the connection, even if I'm logged in my PS3 session, it just stop working. I have noticed that this is in various d-link models, maybe that's the same issue with yours?
mauchito said:
Hi buddy
Actually I had a similar problem, and then I noticed that the PLC from D-Link have a power saver mode that, if you don't use it for a certain amount of time (mine is 5 minutes) it will cut the internet connection. For me, 5 minutes is the most moronic thing they could have done, so whenever I don't use the internet for 5 minutes, it closes the connection, even if I'm logged in my PS3 session, it just stop working. I have noticed that this is in various d-link models, maybe that's the same issue with yours?
Click to expand...
Click to collapse
is it feasible to deactivate this option?i don know if thats the same problem because so far i had no disconnections.. :/
ask5868 said:
is it feasible to deactivate this option?i don know if thats the same problem because so far i had no disconnections.. :/
Click to expand...
Click to collapse
what is more..i turn on my computer that is connected to a plc adapter.i have an internet connection.if another computer,that is in another room,turns on then i lose my connection.its like the other pc "steals" my connection's power.
another incident,if i remove the laptop's plug and i use only the battery then i can be connected.like there is not enough power for energy and sign transmission simultaneously.
any idea for causes and solutions??
some idea?