Database Users

Does anyone know how to unlock mine?

hi to everyone,
i have a locked-SIM t-mobile phone edition which i tried to unlock using a serial cable & the manipulator.
the problem is that the manipulator can't find the device after scaning COM port.
i have checked that the port is not blocked by any program including the synchronization programs but there was no luck.
anybody knows what is the problem in my situation?

Be sure to press SIMULTANEOUSLY both power button AND reset with your stylus. This will bring your T-Mobile to WALLABY mode. After the screen reads GSM OK, connect the cable to your phone and PC and run manipulator.
This should work. I have the same T-Mobile and it worked with mine.

There have been posts with reports where people have had problems connecting to the pda because they have been using a laptop...

I unlocked mine on a SONY VAIO laptop successfully.

hi again,
i have tried the exact steps for unlocking but still the device wans't detected by the manipulator.
the synchronization program also can't detect the device if it is pluged using the serial cable.
could anyone please help me? i couldn't use the phone since 1 month.

Try 75656354

Wasn't there in any thread the hint to uninstall ActiveSync to get the manipulator to work?!?!
Search here in the forum. It wasn't posted as long time ago.
Or just try it when you uninstall.
I ment that there was a problem because active sync wants to connect to the XDA/MDA when connecting it to the serial....
Regards
LumpiStefan

Remember you must have the XDA in bootloader mode.

Wizard Hangs..is dead like a BRICK

Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz

it is time to donate to XDA-developers!

Just reflash the ROM, friend. Seems to be a bad flash to me.

deleted this post

wiztek said:
Hi Wizards,
Im having a Qtek 9100 and using a ROM cooked by Mfraazz. The phone application seems to hang and i have to reset in order to make it functional...the problem does not end here. When the phone boots up, the start menu bar is not visible...I have to hard reset my device 3 -4 times..thats whn the start menu is visible..
I have only one application(Good Link) running...plz help me guyzz
Click to expand...
Click to collapse
try another cooked ROM or an official one and see if problem persists...

the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom

z0d1ak said:
the mfrazzz crossbow reloaded made my kjam hang on the bootloader as well n my fone cant b detected by active sync either plz help how m i suppose to flash another rom wen active sync itself dont detect my rom
Click to expand...
Click to collapse
Rom has got nothing to do with Activesync not detecting your phone,it's most probably the problem of Activesync application or your USB cable not establishing connectivity.Check the usb connectivity for problems.To verify the connectivity,check if it gets charged via usb connection.
secondly,get your phone into bootloaders and connect it to your Pc via usb cable,see if usb appears at the bottom of the bootloader mode (multicolor screen),if it then it's connecting.
You don't need Activesync for flashing a Rom to your phone,it's done via usb cable,and while flashing activesync is automatically turned off by the Ruu.So if you are able to establish connectivity via usb cable in bootloaders (multicolor screen) you can flash to any Rom.
Cheers

o2 xda mini S help

i have recently purchased this phone and it is currently locked to t-mobile. I am a canadian resident using rogers network. when i turn the phone on it says NETWORK IS LOCKED PLEASE INPUT UNLOCK CODE. I know this number is generated by the IMEI if i remember correctly..... i just dont know how to go about accomplishing this. also ...my computer isnt recognizing it VIA USB............ i am just so at a loss for what to do ...please someone help

oh yeah the IPL is 1.08 and the SPL is 1.08 when i get to the bootloader screen that is all that comes up

As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck

zabardast_1 said:
As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck
Click to expand...
Click to collapse
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .

zabardast_1 said:
As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck
Click to expand...
Click to collapse
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .

hoffmanbiker said:
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .
Click to expand...
Click to collapse
ok,
If there's a connectivity problem,there are a couple of things to verify it.First which windows are you using,if its winvista,you'll have problems,activesync doesn't work with vista,secondly its not recommended to work on vista.So get on with winXP and also get Activesync version 4.5 the latest.In activesync check the option 'allow usb connections' and in your phone goto settings---> connections and 'uncheck' 'establish all network connections' or something and then try to establish activesync connectivity.If still fails,than,
2. verify usb connectivity with pc, to do so get your phone into bootloaders mode (multicolor screen) by pressing and keep holding down the camera button and simultaneously push the Power On button,your phone will wake up and go into tricolor screen (Bootloaders mode)with ipl/spl showing in red colors.When in bootloaders,connect your phone with pc via usb cable,if a small usb appears at the bottom of the tricolor screen,then its has connectivity,but if doesn't appears,then you have a connectivity problem,so:-
a. either your usb cable is faulty,get a new usb cable and try again.
b. or usb input slot of your pc is not operating,try with a different usb input slot of your pc or even try out on an another pc.
c. Mini usb port of your phone is broken,get it repaired or replaced.
check out all these options and rectify the problem.
Cheers !

ok just to verify i am using wins XP and i have removed entirely activesync, reinstalled it checked to see if there is connectivity VIa boot loader and still it comes back that there is a usb malfunction is there ANY drivers i might need?

dude dont know about your unlocking problem, would be nice to hear that youv solved it... wouldnt it be nice if this world had no problems? but then saying that this forum would not exist... and troubleshooters wouldnt have jobs! lol
a) Unlocking NO...
b) active sync... Bluetooth... just rememberd you cant get in can you? to connect ia bluetooth?
email me privately on [email protected] and i may be able to help you if not ill find a way... a bit lost in the head (Attention Dissorder) cant focus...
sori
Sham

no connection with pc

hi
i have a htc touch elf0100 and i'm having a lot of trouble trying to get a connection with my pc. i already read every post here and i don't seem to find the solution to my problem.
here's the thing. i make a hard reset because i was having a lot of trouble with the room that i have so, i decided to make it, but when he reboot it won't pass by the align screen and now i'm stuck in the boot loader screen.
it says that the ipl is 2.27.002 and the spl is 2.28.0000, what i need is to make a connection with my pc so i can flash the room with the one that i have. i try with the mtty but i just can't get the usb port open, and i have try everything.
my o/s is win xp sp3
so please if someone could help me, i'll be very thankful
and i'm sorry about my english, bye.

i think the problem is in mini usb port in ur elf. go to htc customer care.

before sending it off to the care center maybe try a different cable
also..when you plug your device in,does it charge?
I kinda had the same problem which disappeared after a while...

cable
I too had a smiler issue, now Im using the cable that came with my camera, and it works perfectly.

I just have the same problem,changed usb cable,tried on other pc with activesync 4.5 but again csn't syncronize with the phone.plz help.

maybe u can't believe this but i tried device reset via phone menu,then synchronization done ok.

Connecting problem with imate in 6.5

I upgraded my phone from 6.1 to 6.5 .
I was able to connect my phone via usb cable before upgrading but now it does not .
Anyone knows how to solve this problem so i can use the same net which i am using on my pc via usb cable on my imate kjam.