hey xda..i recent down a rom for my tmo wing open-touch 3.0 for wing only i believe its called now i cant upload anymore roms because it saying it cant read the connection is the 6.1 affecting the connection?ill get error 222 i believe when i upload rom help plz thanx
Im sorry, but your post doesn't really make any sense and was kind of unintelligible.
It sounds to me like youre trying to flash a rom onto your phone but its giving you a connection error? IF that's the case, uninstall activesync, and redownload it from MICROSOFT
If that's not what you mean, Could you please try to explain it a little better?
I Think this might workout,
Start -> Settings -> Connections-> USB to PC
There uncheck the Box and it might do it.
Ghostrider
I've had a similar issue. Once doing the Hard SPL and the screen goes white, disconnecting active sync. I can never get active sync to reconnect to finish with the flashing process. I've tried uninstalling and reinstalling active sync 4.5. Unplugging and plugging usb cable back in, etc. Nothing seems to work for me on getting active sync to connect after my phone reaches the white out screen part. It shows the Wing in the Mobile Device section.I've tried going to connection settings in active sync and clicking connect...just goes through all the com ports, but nothing happens. I'm left with the only option of disconnecting and doing a soft reset. Once that happens, of course the phone connects instantly to active sync.
Keep in mind, activesync will only show connected as long as windows is running on the phone and establishing the connection between your Windows PC and Windows Mobile Device.
Throughout the flashing process, activesync may not show connected, but as long as the phone is showing up in your device manager then you should be ok... and the flashing process should work.
Related
Can anyone help please?
I cannot get my xda mini to sync. Basically it just keeps running and nothing happens.
I have researched a lot of threads which refer to setting up a dummy server connection for what I presume is the the "exchange server" which I have attempted - is this a false IP address please?
On my PC, activesync diplays Exchange Server and my XDA with a list of the sync items below.
I keep getting a message on the XDA saying it cannot retrieve an IP address for the connection. Sometimes when I sync the try to connect via GPRS
I do have a wifi connection set up which now works (most of the time).
TIA.
I have the same problem as you with my QTEK 9100. Sometimes it works to connect the device to my portable computer (Compaq Presario 2800) via ActiveSync but mostly it does not. ActiveSync just keep looking for the device but doesnt find it.
I have also tried after that I have turned off the firewall and antivirus software, but it still doesnt work. The few (2-3 times) that it did work I had my firewall and antivirus running.
Anyone have an idea what I should do? It's a brand new QTEK 9100 (just got it a few days ago) with ROM 1.3.7.13 SVE, ROM date 9/29/05. Since I can't connect my device to the computer I can't upgrade the ROM.
turn off your firewall
disable your onboar intell wifi card if you have one
Does this happen to your device when you connect to Activesync immediatly after soft-resetting the device?
I have a similar problem, but I have no problems when I connect to AS for the first time, if I try connecting again before performing a Soft-reset AS won't find the device and the device becomes unasable, only soft-reset solves this problem.
Anyone else with these symptoms?
nolovelust said:
turn off your firewall
disable your onboar intell wifi card if you have one
Click to expand...
Click to collapse
thanks but as I said I have turned off the firewall, and I don't have a built in wifi card in the laptop.
macrinus said:
Does this happen to your device when you connect to Activesync immediatly after soft-resetting the device?
I have a similar problem, but I have no problems when I connect to AS for the first time, if I try connecting again before performing a Soft-reset AS won't find the device and the device becomes unasable, only soft-reset solves this problem.
Anyone else with these symptoms?
Click to expand...
Click to collapse
Yes it is the same problem no matter of the soft reboots. The only times I get it to work is when I have reinstalled the activesync 4.1 software on my laptop, after a reboot (of the laptop) it does not work; instead it only display a network icon with "Limited or no connectivity" (this is also without both firewall and antivirus installed) when I connect the device. The result is that AS can't find the device...
My theory is that it somehow looses the USB drivers installed with ActiveSync 4.1 when I reboot the computer. Anyone know how to fix this? Which (dll?) files belong to the USB drivers? I might be able to manually replace them in the correct path if I find that out...
any news??? I just met the same problem
simple enuf chaps...
i just met the same problem and the fix is pretty simple...
remove a/s 4.1
re-install a/s 3.7 / 3.8.1
re-establish the partnership
re-install 4.1
How do you get a connection between a WM5 device and ActiveSync 3.7 or 3.8?
I cannot get a partnership.
Is this because a WM5 uses IP-protocol for the connection?
thanks
Peter
I am using Dopod 838, the asia version of Qtek9100.
I also seems to have problem on activesync 4.1 which keep on sync and fail to connect. When it fail. I will try
1) In Windows Task Manager, kill wcescomm.exe
2) Kill everything in wizard
3) manually turn-on activesync4.1 on pc again.
4) connect wizard with PC again..
I just bought my phone for 2 days and i have to try a few more times to confirm it really helps.. may be you can give it a try too.
PeterP said:
How do you get a connection between a WM5 device and ActiveSync 3.7 or 3.8?
I cannot get a partnership.
Is this because a WM5 uses IP-protocol for the connection?
thanks
Peter
Click to expand...
Click to collapse
you will need AS 4.0 and above for all WM5 devices
You might want to check device manager when your device is hooked up via USB and make sure there are no exclamation marks on your handheld device.
I have a laptop and I only installed ActiveSync 4.1 and it works fine. I've even re-imaged my laptop since getting the phone and wasn't a problem second time around. I also installed 4.1 on my work PC and it works fine there too.
Not sure if you can use anything older than 4.0. (Not sure the reasons why)
At work I tried to use 3.8 (Just for the hell of it) but 4.0 updates all the USB drivers and stuff. Anything below 4.0 will not recognize WM 5.0 devices as jfran said. After installing 4.x I don't know the reason or need to uninstall then install something older then uninstall and reinstall 4.x.
It should work straight after install. However I do NOT know what happens if by chance you had an older version of ActiveSync then tried upgrading to 4.x. Should work though. I know people have had success upgrading from 3.7 and 3.8 to 4.1 to use the newer Dell Axim x51v which have WM 5.0 here in my environment.
Thanks everybody for your replies,
it was after hamish_dy tip I wanted to know how to get an connection between AS3.x and a WM5 device, since I haven't been able to do so. And I also have read that WM5 needs AS 4.x in order to sync.
Have had my Qtek9100 now for a week, and have been studied this forum in detail for a solution on my problem.
Previously I had a Qtek S100 which synced with my laptop together with AS 3.8. My company uses Groupwise as e-mail system, but with Outlook 2002 also installed on laptop I got it working (also after some days of trial).
Now with my Qtek9100 nothing happends when I plug in the USB-cable. Well not true, it will connect with an IP-address and I can from AS see the filestructure on my Qtek, BUT nothing starts syncing (calendar, contacts, e-mails,etc.). I watch task-manager but nothing kicks in. Previously with my S100, mapisp32.exe always kicked in and was the magic component between outlook and groupwise. With AS 4.1 everything is dead in task-mgr. I also receive the 85010014-error message sometimes.
Have uninstalled AS 4.1 several times, cleaned out registry of AS keys, rebooted, installed AS again, reinstalled outlook, turned firewall off, turned antivirus off, soft-reseted my qtek, and so on. Have downloaded the swedish version of AS 4.1, since my Qtek has swedish language, and thought that was the reason. But no. Soon out of options and ready to take my new qtek back to the dealer.
Any help from anyone is very much appreciated.
thx in advance.
Peter
----------------------
ROM: 1.3.7.13 SVE
ROM-date: 9/29/05
Radio: 01.04.10
Protocol: 4.0.13.17
Ext Rom: 1.3.7.125
One thing you should try before sending your device in is to try sycnching up on a clean machine, i.e. (a freshly imaged machine)
I'm assuming initiating a manual sync does nothing?
ccisn said:
One thing you should try before sending your device in is to try sycnching up on a clean machine, i.e. (a freshly imaged machine)
I'm assuming initiating a manual sync does nothing?
Click to expand...
Click to collapse
No, manual sync does nothing.
If I can't find any solution before mid-next-week, I will find a workstation at work and load only the minimal components/applications needed and try to nail down the issue, as a last try. I work with IT myself so I'm not keen to reimage my laptop, there are just too many things to reinstall.
thanks for the advice!
Peter
Active Sync Sync via USB Resolved (well for me anyway)
Over the last month I have not been able to sync my Wizard to my laptop via USB. Via bluetooth worked a treat, but I was not able to upgrade ROM via btooth.
This morning, completely by accident I resolved the issue with USB sync'ing to Active sync 4.1.
This works for me:
1. Connect Wizard to laptop via USB (you will get the usual problem, with ActiveSync saying "Connecting" and nothing else
2. Whilst phone is still connected via USB perform soft reset on phone
3. The laptop system tray should display "Found new USB device" and then say "Pocket PC USB Sync found"
4. When the laptop / pc has finished installing software and displays "Your new hardware is installed and ready to use" Disconnect the USB cable from your Wizard.
5. Wait a couple of seconds and then reconnect your Wizard via USB and hopefully it will work.
Please let me know if this works for anyone else!
One more thing you could try before throwing it back at the salesman is to check your network connections.
Go to Control Panel and select network connections - make sure you are set to view details and look for the "Local Area Connection" that has a description of "Windows Mobile-based Device". On mine it is "Local Area Connection 3". You may have to scroll to the right to see the description.
Right click the relevant connection and then click "properties". Make sure that the following entries ONLY have a tick next to them.
Client for Microsoft Networks
File and Printer Sharing for Microsoft Networks
Internet Protocol (TCP/IP)
For some reason on mine none of them were initially selected :?
Click OK, when I did this it started syncing straight away!
Good luck!
I am also having a problem with activesync 4.1, up until now i have been able to sync perfectly via bluetooth or usb. However now when i try and sync activesync on my PC says connecting and nothing happens!!
I have tried everything, uninstalled, reinstalled, installed on my laptop (same problem)....
Given i have the same problem on 2 different PC's i am starting to think that its actually the Mini S and not the PC thats the problem. I feel a hard reset coming.............
s4vva said:
I am also having a problem with activesync 4.1, up until now i have been able to sync perfectly via bluetooth or usb. However now when i try and sync activesync on my PC says connecting and nothing happens!!
I have tried everything, uninstalled, reinstalled, installed on my laptop (same problem)....
Given i have the same problem on 2 different PC's i am starting to think that its actually the Mini S and not the PC thats the problem. I feel a hard reset coming.............
Click to expand...
Click to collapse
Hard reset has done the trick, so it turns out all problems may not be down to our pc's......
The same thing happens for me sometimes. What I have found ou this helps.
Unplug pda from sync cable. Kill all active programs on the pda. Plug in sync cable again. Viola! It syncs.
I have the same trouble, activesync just says connecting and thats it, i havent found any particular reason for it. SR does not help, just HR which is kind of overkill. Im really glad for the sprite backup software. I have tried all different things i could think of while i couldnt sync and nothing helped. I have allready about 3 HR after me.
Had my XDA Exec for a week now and its great until I try and do any thing computer related.....
only managed to get it to sync once and that was just luck, sometimes even when active sync says not connected I can still explore but wont sync but this happened only a couple of times?
the message says:
CRITICAL COMMUNICATIONS SERVIES HAVE FAIL TO START, TRY RESETTING THE MOBILE DEVICE, AND CONNET AGAIN.
which i have done loads of time including hard resets!
I had none of these troubles with my ipaq!
Tried:
uninstalling active sync (NOW 4.1)
turning off firewall
soft resets
hard resets
rom update (luckly done it the one time it did sync)
Calling O2 - dead loss tried to get me to call a premium rate number!!
Tried Microsoft’s sync 4 help page - this is when i got it to work the once, i opened properties in networks and checked and uncheck the box's and just seamed to come to life didn’t change any thing??
Tried it since and nothing happens?? Must have some thing to do with this but no luck so far..............
The second problem is TomTom 5 put on sd card put in xda and and it fires up for one second then nothing? Does the same when I open from PDA?
Ahhhhhhhh! its driving me crazy!!!!
sorry to go on but I desperately need help as don’t want to send it back?
Sorry also am I correct in saying you get a 2 week cooling of period with o2 so could send back with in this time and cancel contract?
@glen
did you try to install the latest 4.1 with the firewall switched-off?
What firewall s/w are you using?
(remember to uninstall all previous versions)
yes already had it running and used with ipaq 2210 and worked spot on!
and as mentioned fire wall is turned off
What firewall(s) are you running? I take it that when you say you switched your firewall off you also mean the WIndows firewall as well? What messages do you get when you plug it in? USB device not recognised or something, or does it not react at all?Have you tried trying to connect through Bluetooth, or by using a different USB port on your PC? If so and it still isn't working, there might be a fault in which case return it!
Fin
Also, sorry if its a silly question, but you have got at least Outlook 2002 on your PC?
pretty sure i have willcheck later? whys that?
It's just that if your device is connected (you can explore it etc) there doesn't appear to be a connection problem, the problem seems to be with synchronization, for which Outlook 2002 (or later) is needed. Maybe I'm barking up the wrong tree, but I had a similar problem when i tried to sync my Exec to my laptop (which only runs Office 2K) I had to install 2K2 from the disc which came with the Exec and all was fine.
At work I get a similar problem.
When I sync with the PC I need to start outlook first before connecting via usb, or else it comes up with an error and only allows me to explore the device.
At home it seems to work ok.
For me at work I think its down to activesync trying to do its thing before outlook has properly loaded.
i dont think this is the problem as i sure i have the xp pro version but will check when i get home...
but saying that the exec connets fine at work?
but thats windows 2k
On mine here are my observations and what I did:
1) I deleted poutlook.ink from the start up folder. This seem to help and at the same time reduces any notification errors after a soft reset which I noticed occurs if I have either sadaemon.ink and poutlook.ink on the start up folder. As of now I only have handymenu.ink in there, a program that I use to launch some system applications.
2) I also noticed that for my computer to recognize my EXEC, I need to plug it in when it is OFF. If I plug it in when it is ON, I get the message device not recognize. If I forgot and plug my EXEC while it is ON, definitely, the message device not recognize appears, so I just disconnect my EXEC from the USB cable. Then turn my device OFF by pressing the power button and plug it back to the USB cable after 10 seconds.
3) Remember not to connect your EXEC immediately via USB cable if you just closed the screen and assume it is already OFF. You have to make sure your EXEC is OFF by turning it OFF using the power button or at least you have exceeded your set time for device activity while on battery power.
4) If however after all these precautions and I still get that message device not recognize, which I seem to experience 1 in 50 tries. I just disconnect my EXEC from the USB cable, make sure I turn it OFF using the power button and plug it back in.
5) I also ONLY experienced this problem to have occured after I upgraded my radio version to 1.06.00. BUT this is a small price to pay for the added benefit of that upgarde.
With these in mind, I always connect without any problems. The message device not connected, I only experience 1 in 50 tries, so I am happy with that.
checked outlook and i have 2002 sp3, going to try the over thing mentioned
tried all those tips and i still get the same message:
CRITICAL COMMUNICATIONS SERVIES HAVE FAIL TO START, TRY RESETTING THE MOBILE DEVICE, AND CONNET AGAIN.
which i have done loads of time including hard resets!
I had none of these troubles with my ipaq!
Is your USB cable plugged directly into your PC? I have had problems syncing before when my device was plugged in through my monitor instead of directly.
Thanks chaps i sorted it at last!!! only took 2 weeks!!!
it was the firewall after all just turning it of was not enough uninstalled it the got norton and set up prop as on microsoft web sight.
job done!
just got to sort tomtom prob now, but brought step by step instrucions of ebay for a fiver!!
looks like a rip of but had bits of the guy before so figures crossed!
if any good ill post up here........
Hi,
after upgrading my unbranded HTC Tytn to more recent WM5 version through official ROM upgrade from HTC (italian version QTEK_405), the activesync connection only works if I connect via Bluetooth or IR.
The USB connection doesn't seem to work anymore.
Activesync seems to try to connect, but after a while I get the "cannot establish a connection..." message.
Checking the Network Connections on the PC, it looks like there is in/out traffic packets on the device, but nothing else happens.
Also tried on another PC and same behaviour.
Activesync version is 4.5 build 5096.
Any idea also how to test that USB connector is working properly, to narrow down the problems ?
Thanks in advance
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
Also if your are running WinXP or Vista... with your phone connected with the USB cable. Check in the Device Manger, for any "unknown devices". Select them and remove.
Now disconnect your phone from your computer. Then do a "Soft" reset on your phone. Now reconnect through the USB and does it recognize it as a ppc device?? now try to ActiveSync again!!
Stuart
dgaud007 said:
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
Click to expand...
Click to collapse
Yes, no success.
I can see in the Device manager that the network card is replaced by a USB device, but nothing happens on Activesync side.
scl_electronics said:
Also if your are running WinXP or Vista... with your phone connected with the USB cable. Check in the Device Manger, for any "unknown devices". Select them and remove.
Now disconnect your phone from your computer. Then do a "Soft" reset on your phone. Now reconnect through the USB and does it recognize it as a ppc device?? now try to ActiveSync again!!
Stuart
Click to expand...
Click to collapse
Tried that.No unknown devices.
I've uninstalled the newtork card corresponding to the Tytn, disconnected and soft reset the device.
It seems to reinstall it properly, but still same behaviour.
One thing that makes me wonder is why the device shows as Windows Mobile-based device #3.
Anything I can do to celanup this ? It looks like it's got some old device hanging.
What about ActiveSync on the ppc? Do you have the "Synchronize all PC's using this connection" checkbox checked? Does it point to "USB" below the checkbox? What do you have in that MENU-CONNECTIONS... screen on the PPC?
Damn it Ive been having one problem after another with my 8525 just when I think things are going good there is another set back.
My phone wont sync to my computer anymore. I have Schaps 4.20 installed and I installed the cube earlier today just to see what it was like because I was going to upgrade to shaps 4.3. Now its time to upgrade and when I connect my phone to my pc i get a message that says "usb device not recognized"
What the heck is going on?
I uninstalled the cube from my ppc did 2 soft resets, restarted my computer and it still wont recognize my pcc
Im getting a message that says "one of the devices attached to this computer has malfunctioned, and windows does not recognize it"
It goes on to say "Try reconnecting the device. If windows still does not recognize it, replace the device."
None of this sounds good. Im stressing out!
After two hard resets I finally got it to accept Shaps 4.3 rom. It still wouldnt do it after the 1st and 2nd hard reset but for some reason, the last time I connected it via usb, it worked.
THANK GOD! I dont know what happened and why it wouldnt connect but Im happy I fixed.
Activesync 4.5 Stuck saying "Synchronizing"
The post above saying:-
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
was the solution to a major headache I was having with Activesync 4.5 on a new HTC TYTN II connecting via USB. It would sit stuck with the sync indicator turning / swirling and a message saying synchronizing, but would not be doing any synchronisation!
I disabled the "Enable Advanced Network Functionality" in START-SETTINGS-CONNECTIONS-USBtoPC it it immediately began synchronising. Thought I would enable it again and it went back to just hanging there, definately needed to be disabled to rectify the problem.
Thanks.
ianb-uk said:
The post above saying:-
Did you try disabling the "Enable Advanced Network Functionality" checkbox in START-SETTINGS-CONNECTIONS-USBtoPC?
was the solution to a major headache I was having with Activesync 4.5 on a new HTC TYTN II connecting via USB. It would sit stuck with the sync indicator turning / swirling and a message saying synchronizing, but would not be doing any synchronisation!
I disabled the "Enable Advanced Network Functionality" in START-SETTINGS-CONNECTIONS-USBtoPC it it immediately began synchronising. Thought I would enable it again and it went back to just hanging there, definately needed to be disabled to rectify the problem.
Thanks.
Click to expand...
Click to collapse
I have to disable that on both my wizard and my trinity when syncing with either my XP computer with active sync 4.5 or my Vista computer which comes with WM Device Centre. The problem is since putting an otherwise rather excellent 6.1 rom on the trinity, nothing happens at all with that option disabled. With it enabled it connects but has the problem described above. On my wizard a message pops up when it establishes a connection, nothing happens on the trinity though. It was fine before with the original ROM. I am using [WWE][20-10-08]NiAx Trinity 6.1.70 BlueAngel - OS & SYS 20748 [ONLINE] any thoughts on what could be going wrong here?
Please help, I have a touch vogue wm6.1 , there is no icon to disconnect actsync as there used to be on wm6, i connect my htc to the pc with a usb cable to do internet sharing, but it starts sync , and I can't find a way to disconnected manually. any solutions please.
than you.
I've been using Killsync: http://www.pocketpcfaq.com/applications/killsync.htm for quite a white with no problems at all.
I have it in Quick Launch on my Windows XP computer. Just select and it shuts down Activesync and goes away.
I am usually connected via USB and it is a nuisance to be repeatedly shutting off the Touch.
If you have ActiveSync on your PC, you can choose which files to sync, simply uncheck all of the boxes so that nothing syncs to your computer. This way you do not have to download and install any programs on your vogue.
or go to start, run, type msstartup or msconfig and uncheck the activesync and wescomm and there's another process too, i forget, I'm on win7 now, so Im not quite sure. no need for added programs to take care of disabling the program from the startup list....
Hi All
I searched the Forum but couldn't find a solution to this problem.
1. Came back form holiday yesterday - synced up my HD" with Outlook no problem
2. Tried to do it this morning. By the normal 'connect PC' option didn't come up and activsync icon didn'tr light up on PC
3. Rebooted HD2 and PC..no change
4. Tried to repair/reinstall activ sync, but towards the end of the repair it says 'there was a network error reading from file 'setup/msi'. Guessing that the file may be corrupt, I downloaded it again..same problem..so I can't repair or reinstall
5. There is definitely a connection of some sort as the HD2 begins to charge when connected
Bottom line is that the HD2 is not syncing - and I can't figure out why not.
Any advice appreciated...
Thanks
Do you have a Norton (Symantec) firewall installed? I’ve found that the Norton product can interfere with ActiveSync.
Active Sync not working
Good point..but no. I have AVG installed (and everything was working OK yesterday)
Spooky thing is, I have managed to uninstal, reinstal and reboot..and it still won't show that it's connected with AS even though there is a connection of some kind, cos the device is charging.
Steve
ActiveSync is just a bit crap. It'll do this occassionaly, so if you use it a lot then get used to it.
A restart of the phone, whilst the USB cable is not plugged in, usually does the trick. Only plug it in again when it's fully started.
Also, try setting the AS connection to not allow USB connections, unplugging and plugging back in, and then setting it to once again allow USB connections.
Just messing with it like that usually works for me. Like I said, it's just a bit crap.
Activ Sync
Yeah, I seem to recall I had this problem a while back - I'll faff around with the settings and see if it makes a difference
Steve
stevep said:
Good point..but no. I have AVG installed (and everything was working OK yesterday)
Spooky thing is, I have managed to uninstal, reinstal and reboot..and it still won't show that it's connected with AS even though there is a connection of some kind, cos the device is charging.
Steve
Click to expand...
Click to collapse
Well if johncmolyneux's suggestions don't work then try disconnecting your phone from the PC, restarting both, disconnecting the PC from the network, disabling the firewall element of AVG (if it has one) and then connecting the phone to the PC again.
If that doesn't work I can only suggest removing ActiveSync, totally shutting down your PC, starting up, then re-installing ActiveSync.
I had a similar problem but I was able to narrow it down to Norton in the end but it's a real pain when you don't know why it won't work.
Good luck with this.
I also occasionally was not able to connect with Active Sync, but rebooting the HD2 always fixes that issue. You said that this did not helped you, so try messing with the settings on Active Sync, like johncmolyneux said, also try when plug the usb cable into the device by default it asks you what kind of connection you're establishing (Active sync, data transfer and internet sharing) - try using data transfer, if it connects, unplug and connect it again, this time use active sync.
Reinstall activsync and Try to disable faster data Synchonization on HD2
Active Sync not working (solved)
That'll teach me to not check the obvious! - It turned out that the cable had developed a fault. I changed the cable and it's now OK.
Case closed.
Steve