Database Users

WM 2005 & ActiveSync 4.0- Solution

Somebody has trouble with WM 2005, ActiveSync 4.0 (in PC) is working not stable or hanging all the time and me too- Magneto with WinXP SP2, office 2003 SP1.
In my experience some solution can be improved as following:
1. ActiveSync via IR - very sample but too slow
2. ActiveSync via Bluetooth - sample and fast
3. ActiveSync via USB, we need to do some steps
+ Turn off firewall of OS windows
+ Open network cards on your Himalaya:: Settings/ Connections/ Network cards
+ Click "Remote NDIS host" and you can see: Marked " Use specific IP addres"
+ Click " Use server-assigned IP address"
+ Click OK
+ Connect your device to PC, ActiveSync must be working at least in my case

,,,,
i tried these but it didn'nt work plz try to help its now 20 days of serching for a solution for active sync 4 proplem with usb

,,,,
i tried these but it didn'nt work plz try to help its now 20 days of serching for a solution for active sync 4 proplem with usb

??
@ xpirate
You can try remove activesync 4.0 and reinstall again, reset PC, turn off firewall and reconnect.

the problem i have is with outlook and activesync. whenever i try and use activesync, it pops up with some dialog about outlook not being configured correctly. which is true, seeing as I DONT USE OUTLOOK FOR ANYTHING! so why is this happening? it's not even set to sync email as i dont use outlook!

deadparrot said:
the problem i have is with outlook and activesync. whenever i try and use activesync, it pops up with some dialog about outlook not being configured correctly. which is true, seeing as I DONT USE OUTLOOK FOR ANYTHING! so why is this happening? it's not even set to sync email as i dont use outlook!
Click to expand...
Click to collapse
I noticed the same problem with AS 4 - it would only synchronise Favourites and Files.
Read the error messages carefully and you will find one telling you to use the 'Detect & repair' option on Outlook. I did so and it synced properly.
It was when I went back to Outlook Express that I realised that my OE wasnt the default email client anymore - Outlook had taken over that function. I made OE the default client again and AS stopped synchronising - went back to the same old error.
From the above I can only conclude that AS4 will only synchronise with Outlook and not any other PIM programmes. It also requires Outlook to be your default email client if you want to sync - slimy lil microsoft trick.
If you have a firewall, you will also notice that ActiveSync tries to send out email messages - this is both annoying and scary. Who are these messages intended for - Microsoft? I have blocked AS4 from sending emails on my firewall, but I still have to do a 'detect and repair' which sets Outlook as the default email client everytime I want to sync...

Problemas with the activesync
I don´t know what happen with the activesync and w2005. I cannot synconize because a hardware happen in the device manager.
The error is in the device manager-network adapters- windows mobile-base.
thanks for the help.
Txemuki

Re: Problemas with the activesync
belaten said:
I don´t know what happen with the activesync and w2005. I cannot synconize because a hardware happen in the device manager.
The error is in the device manager-network adapters- windows mobile-base.
Click to expand...
Click to collapse
I got the same problem with my Win2003Server box.
If you are running XP then you need to apply Service Pack 2
If you are running 2003 then you need to apply Service Pack 1
Seems that these packs have files "netrndis.inf" and "Usb_Rndis.ndi" that fix our problem
If you will find these files could you pls send them here? I dont' have SP1 installed and cant find these anywhere ((

I can confirm this.
On my office notebook I don't have SP2 on XP and Activesync does not work via USB (Bluetooth works).
On my home PC I have SP2 on XP and Activesync works via USB.
I guess I have to try to get these files somehow.
Patric
Update: OK, I got netrndis, but I don't have usb_rndis...

Hi Patric,
Thanx for the file!!!
Can you also post: rndismpx.sys AND usb8023x.sys ?
So, hope we will find a solution for non-SPed WinXPs and maybe for non-SPed Win2003
Thx!

OK, the files are attached. Does this help? I'm still missing the USB_rndis.ndi file.
Cheers Patric

Hi Patric,
pschoch said:
OK, the files are attached. Does this help? I'm still missing the USB_rndis.ndi file.
Click to expand...
Click to collapse
Thank you very much for the files! No need for the "usb_rndis.ndi"
It seems to be working on XP but not on my w2k3 box :-(((
Here what to do with files on XP:
1) Open "Drivers" subfolder in your ActiveSync folder (i.e., c:\program files\microsoft activesync\drivers)
2) Copy all three files there: netrndis.inf, rndismpx.sys & usb8023x.sys
3) Put your I-Mate to the cradle
4) When device installation wizard will ask you to proceed with Automatic or Manual installation you need to Choose "Manual". Then open your activesync's Drivers folder. Choose "Windows Mobile-based device" and wait until installation is finishes...
Good Luck!

hi there..
i have installed longhorn winhec build 5048 (the newest), office xp, activesync 4 and connected my mda2 (with wm2k5) to pc
i can see it in network controlers and activesync connects to mda2
but when i sync, i get an error message
i don't connect to exchange server, i just want to synchronize mda2 with outlook
the error is on the screenshot
thanks for help

johnz said:
i have installed longhorn winhec build 5048 (the newest), office xp, activesync 4 and connected my mda2 (with wm2k5) to pc
i can see it in network controlers and activesync connects to mda2
but when i sync, i get an error message
i don't connect to exchange server, i just want to synchronize mda2 with outlook
the error is on the screenshot
Click to expand...
Click to collapse
Have no exact idea cause didn't have such, but try to:
1) Disable ALL possible firewalls
2) Make sure your current ActiveSync Partnership is not "Microsoft Exchange" and if it is, just delete current partnership and create a new one
3) Remove "Email" from your sync list?!
4) Remove "Favorites" from your sync list?!

thx..
but..I have no firewall turned on (i had only microsoft firewall, it's off)
I have never connected to an exchange server, my partnership in activesync is only with my pc.
I have reinstalled activesync, not useful
removing items could help.. i'll give it a try
i'm going to sleep for now, thanks..
I *think* longhorn is very nice, but i'll stay with xp

I copied everything and did the procedure... now I get the error message 'Device can not start (10)'...
Not successful yet...
Patric

can instal 2005 on my xda2
hey i downloaded the win2005 and active sync 4 but when iam flashing ma rom and instaling the file an error says that cannot connect or smthn or an error in connection why is that ?

any progress
Same error Pschosch
No Progress what so ever!!

ActiveSycn 4.0 Works after all!!!
I fixed my ActiveSync USB problem...
I downloaded ActiveSync 4.0 from Microsoft's web site and instlaled over current AS4.0.
When I placed my MDA2 on the cradle, the same problem persisted, so with the PDA still in the cradle I unplugged the USB connector and then connected it again but to another port. Now the system detected a "new" device and installed properly this time so now it works 100%.
I hope this procedure helps you too!
By the way, I'm on Win XP (no SP2) and USB 1.1
Best regards,
Rayan

Does the activesync 4 can sync WM2003SE? cuz i got problem saying that version incompatible..

Gah! Microsoft Has Forsaken Me - Vista and WM5

Windows Vista only Uses Mobile Centre.
Windows Vista does not support active sync.
Mobile Centre Only supports Windows Mobile 2003.
Thus.
Vista Does Not Support Windows Mobile 5.
Any Other ways to connect I'm not seeing?
EDIT: My bad, 2003 came before 5, so why is it telling me that it's not supported?

It supports WM5 just fine. Been running Vista since RC1 and have not had any sync problems.

i've been able to use windows vista and have it sync with my wm5 wizard...contact, calendar, etc info appear in outlook just fine after the sync...

Vista was a pain in the ar5e to get WMDC to sync with my k-jam, it is a problem with RNDIS, what you need to do is switch the connection method in Start -> Settings -> Connections USB to PC and set it to serial
then you should be able to get it to work as normal.
HTH
Steve

wurzel555 said:
Vista was a pain in the ar5e to get WMDC to sync with my k-jam, it is a problem with RNDIS, what you need to do is switch the connection method in Start -> Settings -> Connections USB to PC and set it to serial
then you should be able to get it to work as normal.
HTH
Steve
Click to expand...
Click to collapse
I can't seem to find that option in the settings. T_T
EDIT: I've never noticed it before, but my phone is also throwing up error messages about how it can't assign an IP to the netowork

ah ha so you have the same prob I had when I tried it initially, the ACU you are using is to old, you need to upgrade it to ACU 3.3 to get the functionality failing that you can install a simple CAB that will give you the functionality. I have no way of sharing the file so if you mail me your email address I can mail it to you.
Cheers
Steve

ActiveSync Guest Mode

So, I have the HTC TyTn II and I sync only with my laptop and use my desktop just to transfer files and maybe install applications. The most annoying this is that ActiveSync wants to create a sync profile with my phone but I always have to click cancel and then it goes to "Guest" mode as noted on the top. I finally dug out the disassembler and nop'd out the call to the Synchronization Wizzard so it enters Guest mode immediately and quietly. Uploaded is A/S version 4.5.0 Build 5096 if anyone has a dedicated computer to upload files/download apps but not necessarily want to keep track of outlook/contacts/notes/etc
Hope someone can find this usefull.

good work!
but, IMHO, dont think this is the best solution
here's MS' official solution:
http://support.microsoft.com/kb/270136/en-us

Nice read. I would suppose the registry modification would be easier for upgrades/updates as well. Thanks for the tip.

Thanks for this! I'll try it on my work laptop tomorrow.
liay said:
good work!
but, IMHO, dont think this is the best solution
here's MS' official solution:
http://support.microsoft.com/kb/270136/en-us
Click to expand...
Click to collapse
I know that trick but it's not working for me.
When I make that key in my registry, I can connect my PDA to my laptop, and it will be in Guest-Mode.
BUT, when I open Active Sync on my device to sync with my works exchange server, I will not work.
However, when I simply cancel Active Sync partnership wizard on my laptop, (so connect in guest-mode) I can sync fine.

I hoped this would have been the solution for us.
We have a lot of users with there smartphone. Coz they use flexible workspaces The sync on several pc's. We don't want to make a new partnership every time. Canceling the partnership makes it possible to sync with Exchange. But with this ActiveSync version this doesnt work. Also the GuestOnly register change syncing with exchange is not possible.
Anyone a solution?

Activesync Didn't Synch contacts
Hi,
Pls, when connecting my Touch cruise with Activesync, i found a message (Registered owner name does not match that in device information, make sure that is speleed exactly the same) in spite of write down the owner information in the PDA as the same mentioned in Computer name, i can't sych my contacts.
Pls advice

Thanks man, a couple of posts above I said I would test if it worked.
I totally forgot to test it. Now I did and it seems to work perfect!!
WHERE CAN I DONATE TO YOU!!

kaiser4782787890 said:
So, I have the HTC TyTn II and I sync only with my laptop and use my desktop just to transfer files and maybe install applications. The most annoying this is that ActiveSync wants to create a sync profile with my phone but I always have to click cancel and then it goes to "Guest" mode as noted on the top. I finally dug out the disassembler and nop'd out the call to the Synchronization Wizzard so it enters Guest mode immediately and quietly. Uploaded is A/S version 4.5.0 Build 5096 if anyone has a dedicated computer to upload files/download apps but not necessarily want to keep track of outlook/contacts/notes/etc
Hope someone can find this usefull.
Click to expand...
Click to collapse
I get an error, "cannot find pegconv.dll" when I launch the program. I have activesync 4.5.0 (Build 5096).

AS + activetweak...
http://w15.easy-share.com/1701928313.html
fiddle with it..

nothin said:
AS + activetweak...
http://w15.easy-share.com/1701928313.html
fiddle with it..
Click to expand...
Click to collapse
I think when using this program to force ActiveSync guest mode, it just adds:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"GuestOnly"=dword:00000001
to the registry.
That tweak is not working for me.
I can connect succesfully, but my device won't sync.
Clicking "sync" on my device, just doesn't do anything.
BTW: I sync with an Echange server through LAN network.

johanromijn said:
I think when using this program to force ActiveSync guest mode, it just adds:
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"GuestOnly"=dword:00000001
to the registry.
That tweak is not working for me.
I can connect succesfully, but my device won't sync.
Clicking "sync" on my device, just doesn't do anything.
BTW: I sync with an Echange server through LAN network.
Click to expand...
Click to collapse
just so you ppl know:
The trick from the MS link>>>
APPLIES TO
Microsoft ActiveSync 3.0
Microsoft ActiveSync 3.1
Microsoft ActiveSync 3.5
Microsoft ActiveSync 3.6
Microsoft ActiveSync 4.2
NOT Microsoft ActiveSync 4.5
just so you know.
wbr
V

Syncing Vista, XP & Touch HD

Good Afternoon to all,
Quick background info. I have a Touch HD successfully syncing with Windows XP SP2 & ActiveSync in my office, and also Vista Ultimate 64bit SP1 with mobile device manager (or whatever the inbuilt version is called ) at home.
The sync between all three works flawlessly and more than happy with it and have always got access to a working up to date calendar.
However there is one difference, when my phone is sat in its cradle connected via USB to my home PC (vista) it will sync but also allow data connection so, although not really required, it will continue to check for emails, update stocks etc etc. When I am in my office (XP) and try and use anything with regards to connecting to a data connection as listed above, it will not, displaying unable to connect on the weather/stocks tab, or just error in emails.
Any ideas how I can get the XP machine to do what I get with the vista machine? the only way i am working around it at the moment is on the XP machine unticking allow USB connections, removing and re-connecting phone and then it does not connect to ActiveSync and allows a data connection. This works but not the greatest way to do things as have to remember to do the reverse to sync it back again.
Sorry to go on for a bit but wanted to get in as much info as possible in the hope someone may be able to help with my dilemma.
Regards
Jody

Hi Jody,
Is your ActiveSync (on Windows XP) the latest available version ?
Have you checked that all settings are the same on both computers ? (well, as Active Sync is different from Mobile Device Manager, some settings are not called the same).
As a side note, how did you manage to sync your HD with Vista 64 ?
There are so much people complaining it doesn't work.
Did you use the standard v6.0 version "Windows Mobile Device Manager" that is already available in Vista, or did you upgrade to v6.1 ?
Cheers.

When it's synced at home, your Touch HD is using your computers internet connection to update stocks, weather e-mails etc.
When it's synced at work, your device is trying to use your work's internet connection, and failing. Your employer is more than likely not allowing the internet traffic. Do you know if you use a proxy server to connect to the web at work? Do you have unrestricted internet access or is there a firewall?
I do not know enough about how Activesync passes your internet connection to your device. Perhaps someone else knows whether or not this traffic is port 80 and whether or not Activesync automatically uses Internet Explorer's proxy settings, as it is not a global OS thing. Your mail will be pop3 or imap, which are not port 80, in which case the connection to your mail server may be blocked by your employer.
phonatrep - I sync my Touch HD with Vista Home Professional x64 fine straight out of the box, although I think I downloaded the latest WMDC from Microsoft because it does not come bundled with Vista AFAIK.

All the settings are correct, however we do have a rather strict internet firewall running through a proxy. Although I have unrestricted internet access, webmail access is blocked across the board, I am wondering if this is whats stopping me getting emails etc. As an interesting addition, the weather and stocks will update, just cannot use internet or receive emails.
As for syncing with Vista, I have Vista Ultimate 64bit and downloaded the device manager from the microsoft site as didnt find it as part of the original OS. As far as I remember did not hit any problems, other than me pressing wrong thing on the phone and syncing a complete delete of all contacts... oops! has worked perfectly ever since.

J7ody said:
As for syncing with Vista, I have Vista Ultimate 64bit and downloaded the device manager from the microsoft site as didnt find it as part of the original OS.
Click to expand...
Click to collapse
Could you please tell me if you use the device manager v6.0 or v6.1 ?
It seems that's part of the trick to make it work.
Budadank said:
I sync my Touch HD with Vista Home Professional x64 fine straight out of the box, although I think I downloaded the latest WMDC from Microsoft because it does not come bundled with Vista AFAIK.
Click to expand...
Click to collapse
Same question, WMDC v6.0 or v6.1 ?
That would be very kind of you, sorry to bother you with that stuff
Thanks !

Anybody ?
That would really help me to know if that's WMDC 6.0 or 6.1 that really works for you on Vista 64 bit.
Thanks !

Am at work at the moment but will have a look tonight for you and let you know.

J7ody said:
Am at work at the moment but will have a look tonight for you and let you know.
Click to expand...
Click to collapse
Thanks a lot !

Just wanted to give some feedback too. I am also syncing with Vista x64 and XP x86 without any problems. I checked and am using the WMDC 6.0 on Vista, never had any problems since the very beginning.

remko said:
Just wanted to give some feedback too. I am also syncing with Vista x64 and XP x86 without any problems. I checked and am using the WMDC 6.0 on Vista, never had any problems since the very beginning.
Click to expand...
Click to collapse
Thanks for the feedback !
That's strange I hear a lot of people using WMDC 6.0, which is the one included as factory default in Vista.
There is a 6.1 version that allows to use Windows Mobile 6.1, so I will need WMDC 6.1, but I haven't found anyone using WMDC 6.1 with Vista 64.

I have spent a lot of time searching all forums I know.
I still haven't found anyone successfully using WMDC 6.1 with Vista 64 bit.
(it seems everybody use v6.0)
Is there someone here that uses WMDC 6.1 in Vista 64 bit ?
Thanks !

Ok, I now have WMDC 6.1 installed on Vista 64 bit.
I can sync my HTC Touch HD without any problem.
Please note that I followed this procedure :
-Boot as administrator.
-Install Outlook 2007.
-Reboot as administrator.
-Install Outlook 2007 Service Pack 1.
-Reboot as administrator.
-Install WMDC 6.1 (without the phone connected)
-Reboot as your standard user login.
-Connect the phone to the computer, using the USB cable.
Please note that Microsoft documentations are not consistent about whether or not you need to connect your phone "before" or "after" you install WMDC 6.1.
On some documentations Microsoft says "before", on others Microsoft says "after".
Well, I choose to connect my phone "after" WMDC 6.1 was installed and computer rebooted, and it worked.
Maybe people had problems because when they connect their phone, the default Vista WMDC 6.0 installs a driver for it, then WMDC 6.1 comes and have trouble replacing that driver by the new one.

activesync

Hi,
I was able to install activesync but not to get PC and 3G synchronized.
In explorer, I can "see" it but no synchronization (in My computer I have an icon "mobile device", when I doubleclick I get no detaiel, no folders, no file
When I try to link (USB is checked) I get a message saying nothing can be found
When connecting, on the 3 G I get 3 options... the uppermost is "Activesync"... this is checked
Can somebody help or show me the threads to be read (and that realy help)
Thanks

ActiveSync only works with XP, not with Vista or Win7. For Vista download Mobile Device Center. Install first and then connect. happy thrills.

I'm using XP...
I can copy files to and from the device, but no activesync...
Strange.. still no solution to this problem.

r u using illegal win xp?

Nope... laptop so...

Do you have any software firewall installed? Might be a reason, had it before..

Try uninstall and reinstall ActiveSync and associate the device again. It worked for me once before

I had some problems with activesync and data transfer. It would sync but would disconnect after a while during file transfer. I was told it was an unusual problem. Nevertheless, the nice people at HTC changed the mainboard and I'm now problem free. They mean it when they say they are people centric. I'm a potential customer for life!

Activesync keep on appear automatically
Hi,
I have Garmin mobile XT, SPB shell V3.00 and WK Task installed in my Jade, and i have problems where Activesync launch automatically every time after i used my Garmin. This is quite annoying, did anyone has the same experience?
Thanks.
Vincent