Related
could anybody explain me how the USB FLASH MODE function in the bootloader works??
when i boot up in bootloader mode (5.15) and press the rec-key the USB FLASH MODE shows up?? how can i use this??
tim
Anyone do not know how to do a USB FLASH MODE upgrade ??????
pleasee !!!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/viewtopic.php?t=27384&highlight=guide
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
look and thou shall find
thanks
Rudegar said:
http://forum.xda-developers.com/viewtopic.php?t=27384&highlight=guide
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
look and thou shall find
Click to expand...
Click to collapse
Thanks a lot for you answer, but I need to know how to do a USB FLASHING, my SD card slot is probably broken so I cannot use SD card....
I read, that it is possible to flash MDA with BIN file (mtty.exe program). Does anybody have experience with this type of flashing?
Where can I find BIN versions of ROMs?
my bad
http://lumpistefan.dyndns.org/
make a rom
put the xda in the cradle
run the exe file
Rudegar said:
my bad
http://lumpistefan.dyndns.org/
make a rom
put the xda in the cradle
run the exe file
Click to expand...
Click to collapse
I cannot upgrade with exe, because it needs ActiveSync and WM200X installed..... i think.
:-( My 2003ROM is broken.
Thanks for your replies, I'm trying to solv this problem nonstop since sunday.
Maybe just throw MDA in garbage could solv my problem...
Bootloader 5.15 works and GSM OK. Thats all....
So, why do you think your SD-Slot is broken?
Have you tried to insert a empty SD-Card in your devuce, enter bootloader, making a backup of your exisiting ROM to your SD-Card and the reenter the bootloader?
Stefan
LumpiStefan said:
So, why do you think your SD-Slot is broken?
Have you tried to insert a empty SD-Card in your devuce, enter bootloader, making a backup of your exisiting ROM to your SD-Card and the reenter the bootloader?
Stefan
Click to expand...
Click to collapse
Thanks for reply..... I tried to backup and load the ROM back, but
1) after download to the MDA, everytime bad checksum and cannot start win.
2) I tried SD card test in bootloader and everytime test said "TEST ERROR"
3) I tried 4 different SD cards with same results
4) I tried many ROMs (2002 and 2003) - same problem "Checksum is not correct"
mikulkajan said:
Thanks for reply..... I tried to backup and load the ROM back, but
1) after download to the MDA, everytime bad checksum and cannot start win.
Click to expand...
Click to collapse
Explain this a little bit more....
When you have backup the ROM via bootloader to the SD. You get there a checksum error?
What happens when you soft reset the device after backup and then reenter the bootloader?
When you're trying to install a new ROM on your device, what for SD-Card Writer are you using? Internaly build or external device?
Stefan
LumpiStefan said:
mikulkajan said:
Thanks for reply..... I tried to backup and load the ROM back, but
1) after download to the MDA, everytime bad checksum and cannot start win.
Click to expand...
Click to collapse
Explain this a little bit more....
When you have backup the ROM via bootloader to the SD. You get there a checksum error?
What happens when you soft reset the device after backup and then reenter the bootloader?
When you're trying to install a new ROM on your device, what for SD-Card Writer are you using? Internaly build or external device?
Stefan
Click to expand...
Click to collapse
I'm using external SD reader (USB) - I was not able to do it with internal PCMCIA reader, so I borrow one.
When I try to do backup ROM to SD via bootloader it is fine, but when I try to give the ROM back to the MDA, everything seems to be allright, but after download from SD to MDA I get Download OK,but Checksum is not correct.
I also tried to test my 4 SD cards in the "bootloader SD card test" and everytime it says TEST ERROR. This is why I think my SD card slot is bad :-(.
I am really desperat and do not know what to do :-(.......
Any help appreciated
I think that only way for me is to load the ROM to the MDA through USB, but not the ActiveSync way. I read somewhere, that it is possible with "bin" file by mtty.exe program, but I cannot find any bin ROM.
RE
HI
hard reset your device by taping and handling the top off button and reseting, the bootloader will invite you to wait. do so, wait untill you'll see the message '' gsm error'' then tap the sound button on your left, put the device back on the craddle.
Do this if you had already enabled the usb for dos in the bios of your computer.
this shall work
salute!
is it possible to do that?
I brick my Heral when I trying to patch IPL, now it stack in boot mode.
I try al avaliable on xda ftp rom updates but always I got "Incorrect file" .
My Herald is from Rusia (cyrylica on keyboard)
it is indeed possible to do so. i am not sure of any IPL/SPL requirements, but here are the instructions.
1. take your sd card
2. take the .nbh file of the rom and rename it to "heraimg.nbh"
3. put it on your sd card
4. put it in your phone
5. go into bootloader. if already in bootloader, soft reset.
6. follow the onscreen instructions
thats how i flashed ttran's first '209 rom
fzzyrn said:
it is indeed possible to do so. i am not sure of any IPL/SPL requirements, but here are the instructions.
1. take your sd card
2. take the .nbh file of the rom and rename it to "heraimg.nbh"
3. put it on your sd card
4. put it in your phone
5. go into bootloader. if already in bootloader, soft reset.
6. follow the onscreen instructions
thats how i flashed ttran's first '209 rom
Click to expand...
Click to collapse
it shows only checking sd content ant after that it is stacking on bootloader informations (IPL, SPL versions)
what kind of card is it? I do not believe this is possible with microSDHC cards as well as cards of a certain (relatively high) capacity.
Make sure your card is empty except for the file and that is formatted to FAT16 ( I think)
indeed your card must be formated by Fat 32 (use your Windows Explorer to format the card)
Besides this issue, I'm not sure if it is possible to do so if your devide got stuck changing its IPL. Which one did you try?
To make sure; use the official RUU rom from HTC.
Download it; open the exe file with WinRar to extract the nbh file included and use this file to flash your device.
Good luck
dont waste your time, those methods doesnt work. If u r goin to try to... "recover" your device with this method... you're just wasting ur time (you'll end up with a Invalid Certificate error)
theres no solution
jappo01 said:
indeed your card must be formated by Fat 32 (use your Windows Explorer to format the card)
Besides this issue, I'm not sure if it is possible to do so if your devide got stuck changing its IPL. Which one did you try?
To make sure; use the official RUU rom from HTC.
Download it; open the exe file with WinRar to extract the nbh file included and use this file to flash your device.
Good luck
Click to expand...
Click to collapse
thank U for your's all help but I couldn't flash it. I try all avaliable rom updates from xda ftp extracted to micro sd card formatted to fat 32 under windows explorer but without positive results, mean couldn;t start flash process (probably cid lock blocked it)
ochman said:
thank U for your's all help but I couldn't flash it. I try all avaliable rom updates from xda ftp extracted to micro sd card formatted to fat 32 under windows explorer but without positive results, mean couldn;t start flash process (probably cid lock blocked it)
Click to expand...
Click to collapse
It could be beacuse the ROM that you are trying to flash requires Hard-SPL.
jappo01 said:
indeed your card must be formated by Fat 32 (use your Windows Explorer to format the card)
Besides this issue, I'm not sure if it is possible to do so if your devide got stuck changing its IPL. Which one did you try?
To make sure; use the official RUU rom from HTC.
Download it; open the exe file with WinRar to extract the nbh file included and use this file to flash your device.
Good luck
Click to expand...
Click to collapse
thanks work fine ( heradiag.nbh)
Hello there,
is it possible to flash NBH's to the HD2 that are placed in the root directory of the integrated microSDHC card? I remember that such an option existed for the XPERIA X1 and when the device was booted via VOL- and POWER ON, it got to that menu with all the colors. Then the XPERIA X1 loaded the NBH that was placed on \Storage Card\Kovsimg.nbh.
If it is also integrated into the HD2, what has the NBH to be renamed to?
Thanks in advance.
Sincerely, nitrate.
nitrate said:
Hello there,
is it possible to flash NBH's to the HD2 that are placed in the root directory of the integrated microSDHC card? I remember that such an option existed for the XPERIA X1 and when the device was booted via VOL- and POWER ON, it got to that menu with all the colors. Then the XPERIA X1 loaded the NBH that was placed on \Storage Card\Kovsimg.nbh.
If it is also integrated into the HD2, what has the NBH to be renamed to?
Thanks in advance.
Sicnerely, nitrate.
Click to expand...
Click to collapse
Is all standing on thread http://forum.xda-developers.com/showthread.php?t=609477 !
1. Rename the .nbh to LEOIMG.nbh
2. Copy to root of sd card
3. Shutdown device
4. Hold vol down and power
5. Follow the introductions
6. Press power button to flash rom
Hi, does anyone know if the storage card flash method completely formats the device first (like mtty?)
I've run into some random freezing issues after being bit of a flash-a-holic with all these tasty ROMS. Anyway I've flash from the storage card and will go a week without a new ROM and see if that helps.
Regards
Ston said:
Hi, does anyone know if the storage card flash method completely formats the device first (like mtty?)
I've run into some random freezing issues after being bit of a flash-a-holic with all these tasty ROMS. Anyway I've flash from the storage card and will go a week without a new ROM and see if that helps.
Regards
Click to expand...
Click to collapse
Hi
SD card method will not full format device. But you have to HARD RESET after every rom upgrade.
Good luck
sabes143 said:
Hi
SD card method will not full format device. But you have to HARD RESET after every rom upgrade.
Good luck
Click to expand...
Click to collapse
Hard reset does not fornst either. it would be best if you used mtty before flashing from sd. it takes like a min and fixes random freezes / unexplained hard resets if you have been experiencing them.
hi , i try many option to return at wm6.5 but not work i very need help thank
jubas said:
hi , i try many option but not work i very need help thank
Click to expand...
Click to collapse
and what exactly would you need help with?
return on wm6.5
jubas said:
return on wm6.5
Click to expand...
Click to collapse
a) Put a stock rom onto your sd card and name it "leoimg.nbh"
b) Put phone in bootloader (hold down volume button, then press power button and wait for instructions)
Or just flash a stock rom via active sync. There is many many guides on forum to do this.
Its very easy. Format your sd card using a digital camera, download a stockrom meant for your device meaning the stockrom with the native language of the phone. Unpack the stockrom and change the .nbh data into leoimg.nbh.
Format you sd card in your computer into fat32 and copy the leoimg.nbh data into it. Put the sd card into your phone and go into bootloader, then follow the instructions on your phone's screen. That should do the job.
Hi all,
Recently got my Nook Simple Touch, upgrade to firmware version 1.2.1
I tried rooting following the described steps:
http://forum.xda-developers.com/show....php?t=2040351
but after inserting the SD my device doesn't power on anymore
I tried anything, and even tried nook manager ver.0.4.0 tested under win (win32diskimager, DiskImage, Roadkil's Disk Image) and under linux ( dd ),
the image is copied without problems, I tried several different cards, but has no effect
If I put the card while the device is running, I can see the files but when I reboot I can not boot
After this failure I decided to try this:
http://www.the-ebook.org/forum/viewtopic.php?t=25913
but again the same problem, I reboot I can not boot
Please, help
Regards,
necrocannibalistic said:
Hi all,
Recently got my Nook Simple Touch, upgrade to firmware version 1.2.1
I tried rooting following the described steps:
http://forum.xda-developers.com/show....php?t=2040351
but after inserting the SD my device doesn't power on anymore
I tried anything, and even tried nook manager ver.0.4.0 tested under win (win32diskimager, DiskImage, Roadkil's Disk Image) and under linux ( dd ),
the image is copied without problems, I tried several different cards, but has no effect
If I put the card while the device is running, I can see the files but when I reboot I can not boot
After this failure I decided to try this:
http://www.the-ebook.org/forum/viewtopic.php?t=25913
but again the same problem, I reboot I can not boot
Please, help
Regards,
Click to expand...
Click to collapse
First of all, do a factory reset using this tool http://forum.xda-developers.com/showthread.php?t=1475613
Then use this http://forum.xda-developers.com/showthread.php?t=2040351 method to root your Nook. It's pretty simple and works very well.
reset factory steps here
http://forum.xda-developers.com/showpost.php?p=28763125&postcount=5
and before do anything .... take backup ..... so to avoid brick and damage ur nook
let us know what happen with u
best regards
Hi,
Thank you for all the help, appreciated!
So far I did the following:
reset factory,
http://forum.xda-developers.com/showpost.php?p=28763125&postcount=5
reset them successfully.
after that again, I tried to boot from the SD card, but still no success
Then try the following:
http://forum.xda-developers.com/showthread.php?t=1475613
But again, with the image of the sd card, can boot, therefore I can not do factory reset with this tool (
I made the following conclusion:
any image to put on the SD card, the device will not start
Any other suggestions (((((
necrocannibalistic said:
Hi,
Thank you for all the help, appreciated!
So far I did the following:
reset factory,
http://forum.xda-developers.com/showpost.php?p=28763125&postcount=5
reset them successfully.
after that again, I tried to boot from the SD card, but still no success
Then try the following:
http://forum.xda-developers.com/showthread.php?t=1475613
But again, with the image of the sd card, can boot, therefore I can not do factory reset with this tool (
I made the following conclusion:
any image to put on the SD card, the device will not start
Any other suggestions (((((
Click to expand...
Click to collapse
Can you boot ClockWorkMode?
necrocannibalistic said:
Hi,
But again, with the image of the sd card, can boot, therefore I can not do factory reset with this tool (
I made the following conclusion:
any image to put on the SD card, the device will not start
Any other suggestions (((((
Click to expand...
Click to collapse
How are you putting the image on the SD card?
murz_07 said:
Can you boot ClockWorkMode?
Click to expand...
Click to collapse
Not, fail with any image,
David0226 said:
How are you putting the image on the SD card?
Click to expand...
Click to collapse
For example with WinImage
With your MicroSD card now clean, open up WinImage and select ‘Disk’ -> ‘Restore Virtual Disk Image on Physical Drive…’ and select the drive letter associated with the MicroSD card and hit ‘OK’. Now locate the the folder were you extracted .img file and select the file. If you do not see it, make sure file type is set to ‘All files’. Confirm and the .img file will be written to the card.
And I try the same with win32diskimager, DiskImage, Roadkil's Disk Image) and under linux ( dd )
I use Win32 Disk Imager and have never had any issues. You are selecting a .img file to write, correct?
Are you sure your SD card is ..
1) big enough for the image you are trying to write to it?
2) not corrupted in some way?
Perhaps attempt a full format of the card (uncheck "Quick Format") before attempting to write the image again.
David0226 said:
I use Win32 Disk Imager and have never had any issues. You are selecting a .img file to write, correct?
- I tried a few image I'm sure I do whatever it takes
Are you sure your SD card is ..
1) big enough for the image you are trying to write to it?
- my card is 4 GB, and ai try with 2 and 8 GB
2) not corrupted in some way?
- I tried several cards
Perhaps attempt a full format of the card (uncheck "Quick Format") before attempting to write the image again.
Click to expand...
Click to collapse
- I did a full format of all cards before uploading image
I just can not figure out what's wrong
It seems from the thread that you have tried several different images, is this correct? If not, perhaps the problem is that the .img file you have is corrupt. Perhaps attempt to re-download one or all of the image files.
David0226 said:
It seems from the thread that you have tried several different images, is this correct? If not, perhaps the problem is that the .img file you have is corrupt. Perhaps attempt to re-download one or all of the image files.
Click to expand...
Click to collapse
yes, I tried a few different image, but none of them worked:
http://download.doozan.com/nook/NookManager-0.5.0.zip
http://download.doozan.com/nook/NookManager-0.4.0.zip
http://narod.ru/disk/64735727001.864de3db42269dff54fe636c9d46df07/zln-uni-ZeroLab.NeT.zip.html
and images from
http://forum.xda-developers.com/showthread.php?t=1475613
Can u sent me NookManager-0.5.0.zip, or give me the other link ?
necrocannibalistic said:
yes, I tried a few different image, but none of them worked:
http://download.doozan.com/nook/NookManager-0.5.0.zip
http://download.doozan.com/nook/NookManager-0.4.0.zip
http://narod.ru/disk/64735727001.864de3db42269dff54fe636c9d46df07/zln-uni-ZeroLab.NeT.zip.html
and images from
http://forum.xda-developers.com/showthread.php?t=1475613
Can u sent me NookManager-0.5.0.zip, or give me the other link ?
Click to expand...
Click to collapse
Theese are good images, I don't think image is the problem.
Ultra weird problem...
Last night I put some books back to the sd card, rebooted several times and everything is fine as soon as I upload an image, boooooooooom, will not start.
Perhaps I will fail and have to give up ((((
necrocannibalistic said:
Ultra weird problem...
Last night I put some books back to the sd card, rebooted several times and everything is fine as soon as I upload an image, boooooooooom, will not start.
Perhaps I will fail and have to give up ((((
Click to expand...
Click to collapse
Did you use external SD-card reader to write images?
murz_07 said:
Did you use external SD-card reader to write images?
Click to expand...
Click to collapse
Yes and micro sd adapter.
necrocannibalistic said:
Yes and micro sd adapter.
Click to expand...
Click to collapse
That's really wierd, I have no idea.
Try to post this to developers forum.
murz_07 said:
That's really wierd, I have no idea.
Try to post this to developers forum.
Click to expand...
Click to collapse
Thanks for the help
murz_07 said:
That's really wierd, I have no idea.
Try to post this to developers forum.
Click to expand...
Click to collapse
In which category to write ?
necrocannibalistic said:
In which category to write ?
Click to expand...
Click to collapse
Here I think.
You can also try this method.