please please i need urgent help
my HTC X7500 is dead
i was unlocking using the athena unlocker and the cable got disconnected before step 2 is done
and now my device is dead "black screen"
i can't get to the bootloader mood...no response to hard reset what so ever !!
i need help what to do..
the things i notice now are when i try to press the reset button when the X7500 is connected to the PC the red light on the button on the right side of it flicks red
and sometimes when i connect it to pc it stays red for a couple of minutes
please all you experts out there...
i need help
i only used this for a month!!!
Related
I got a qtek 9100 and when i soft reset my device the boot screen start with the back light after a few seconds shuts off and then goes to the windows mobile screen without the back light. the windows mobile screen does not go away. I tried hard reseting it also and the same thing happens. Can anybody tell me what the problem could be and some solutions. thanks for ur help guys
HI ! In the firsth place sorry for my bad english.
I have had a titan for about 6-7 months and a week ago it stopped working without a reason.
It stopped responding and after a reset it only shows the starting logo, and after that the screen slowly shifts to pure white colour and I can hear a one "beep" sound.
I tried to hard reset it and everything but without any luck. It charges the battery fine when connected to a USB port (orange light),
after turning it on i get the green ligh, main branded logo and some numbers (M05 S04 B06 D 3.60 and 2 lines of other numbers but they show only for like half a second and disappear so i cant write them down)
after that nothing, the logo screen goes all white, with some "notification" sound and thats all.
When connected to PC It gets detected as "something" and I cant use any flashing software because it says that it did not detect the device,
one time It got detected as some modem device. Is there any way to bring it back to life ? or is it bricked permanently ?
Please Help
And Thank You in Advance !!
Update: I managed to make a connection between my PDA and PC
it is detected as "Microsoft windows mobile adapter #2", and my PDA_PC is detected in My Computer,
but when I try to flash it the software detects it i get the message to wait 5 min till the flash is over but
as soon as this message appears my PDA is getting disconnected and i get an connection error...
help ;(
Ah... and one more thing, I dont know if it matters but when i open my PDAs memory the windows folder appears to be deleted...
can any one zip their windows folder and give me a link to it... maybe that will help ;(
I have the same problem on my Mogul with connecting to my Computer! For some odd reason it won't sync and restarts my computer automatically!! WEIRD!? Just go check out some of the Unbricking posts or Google it- they may help you!
Hey guys,
when i start my mobile i am able to view the following things
ONBL 1.07.000
SPL 1.07.000
OS 1.07.000
my phone was working very well but suddenly it stopped when a call came and then after when i restarted i was not able to see GSM version over there but that line was left blank
and i am not able to go beyond HTC screen which displays this thing, when i start it then it self keeps restarting till i remove battery from it...
if i put it on charging then also the same thing happens..it starts automatically and keeps restarting... when it is in charging by charger or usb i am not able to see the yellow light on the phone which indicates that it is charging ... but some times i can see the yellow light .....
I am not even able to do hard reset with both phone keys green and red simultaneously ..
but i am able to get the 3 color screen by pressing camera key and power key.
i am not able to see the winodws screen any more ............
i tried to boot it without SIM and SD card also but no result..
and i am not able to know why i am not able to do hard reset....(because for it i have tried a lot..)
talajiam said:
Hey guys,
when i start my mobile i am able to view the following things
ONBL 1.07.000
SPL 1.07.000
OS 1.07.000
my phone was working very well but suddenly it stopped when a call came and then after when i restarted i was not able to see GSM version over there but that line was left blank
and i am not able to go beyond HTC screen which displays this thing, when i start it then it self keeps restarting till i remove battery from it...
if i put it on charging then also the same thing happens..it starts automatically and keeps restarting... when it is in charging by charger or usb i am not able to see the yellow light on the phone which indicates that it is charging ... but some times i can see the yellow light .....
I am not even able to do hard reset with both phone keys green and red simultaneously ..
but i am able to get the 3 color screen by pressing camera key and power key.
i am not able to see the winodws screen any more ............
i tried to boot it without SIM and SD card also but no result..
and i am not able to know why i am not able to do hard reset....(because for it i have tried a lot..)
Click to expand...
Click to collapse
Take it to a service center, if it is in warranty, they will rectify it for free. I think you radio is screwed up.
hey thanks for reply...
mine is not i warranty so can i expect that it will be repaired or not ..........
or can u suggest me any shop in mumbai who can do it .....
can you please say me that whether it is a hardware problem or a software problme..
can i cure it my self with the rom's avaiable on this forum
can one more thing why i am not able to hard rest my phone.....
can anyone plz tell me ..........
its urgent
It looks to me as a software problem. Not very sure though. See in the wiki if a radio is available or not. I am not very sure. But please note that before you flash your radio you need to patch your SPL using krazy's thread.
None of the ROMs available here has radio integrated. But you may ask the master chefs like ramersonw, krazy or ankit if they have a radio ROM with them.
Best of Luck
hey thanks...
so i have one problem solved as if i thinks because it is not a hardware problem..
but still have 2 problem...
1) why am i not able to do hard reset.....
2) if i will be able to find a radio rom ever or not.............
if any one can help me in this i will be much thank full to u.............
hi guys, some days ago i tried to change rom on my htc magic...it wasn't my first time so when i was to upadate new ratio my mobile stopped to live :/ right now it's turn off and when i try to turn on it doesn't work.
only light i see it's when i recharge my mobile but if i try to push on power key the red light(recharging) stopping to works.
any idea? it's something i can do on it?
plz anyone can help me?
I have the same problem,the only thing you can do is to send it back to HTC so that they can repaire it. I´ve flashed a wrong SPL.
If you can´t go into recovery(press Home and On Button same time),or into fastboot(press Volume down and On Button same time),i think your phone is bricked.
tnx for your answer...it's very strange to see red light goes off when i push home+ power or volume down + power.
well i think i have to send it back to htc :/
Thats the same problem that i have. I send it back and sayed thats happening while i charging the phone. I have guarantie and after three weeks i got it back.
Hi there!
I broke my HTC Touch Diamond (P3700) a month ago and it asked for calibration. I've had it done but again I couldn't press anything.
So I bought an LCD&Digitiser from ebay.
I assembled the new lcd again, it works fine but it needs another calibration.Because wherever i press on the screen only the buttons on the right are pressed!
This happened before after i smashed my lcs and tried to calibrate!
I am stuck at the same screen as before where it asks to press "a1b2c3" after i turn my phone on.
Please someone help me to press the code from my pc or how to start the calibration tool at system start up!
When I connect it ot my pc it says: "your device is currently locked. To connect to or to synchronise with this PC, please authenticate your device."
Please help!!!!
It was suggested some time ago that you call your number (from another phone of course). After answering the call, you can open the soft keyboard and type a1b2c3.
nathanas said:
Hi there!
as before where it asks to press "a1b2c3" after i turn my phone on.[/B]
Please someone help me to press the code from my pc or how to start the calibration tool at system start up!
Click to expand...
Click to collapse
The thing is that i have the keyboard but i cannot press the buttons. It needs calibration i am telling you above!