No Bluetooth audio - Advantage X7500, MDA Ameo General

HELP please! I have a 7501 Advantage. Does anyone have any idea why I have no audio on my Bluetooth headsets. I posted earlier & now I'm getting desperate. I just got this phone & HTC want's me to send it back for "repairs". I'd rather not. My Lg Style-i worked one week & quit, Jawbone worked less than a minute, Plantronics 510, ditto. They all connect fine & stay connected, just no sound. It's not a connection issue. All the devices work perfectly on other phones, including a Tilt & a two different Moto V365's. I can dial out on the Style-i & answer incoming calls on any of these headsets but there's no audio. A hard reset did no good & I've tried every setting I can think of. Thanks

Just a wild idea have you tried flashing the latest x7501 rom,

Thanks. I think I have the latest version but I'll check. I posted about this on the general forum & at the suggestion of a member there installed Bluetooth Audio V 1.0. I now have my audio back & even after uninstalling this it still works. The question now is how long will it work? Again, thanks.

Related

Bluetooth headset problem

I have only had my XDA 2 for a week and I can’t get my Motorola 810 head set to work. The XDA finds it and tells me that it is compatible with headset profiles but it doesn't seem to work. Can anyone advise me?
Thanks
Andy
Have you followed the procedure for pairing the device,ie: place xda in discover mode, when it finds the headset, tap then enter code for pairing, once paired switch bluetooth to on, then make sure you have bluetooth headset turned on from the main/today screen.
I seem to have problems with my bluetooth headset every once in a while also. I have a HBH65. On ocassion, the connection doesn't seem to be working even though headset is enabled and they are paired. I've found that if I soft reset the XDA2, that the bluetooth headset will work again.
Have you installed towas bluetooth tools patch, this fixes a lot of problems with bonding and alos makes things work where they couldnt before. I was told that the latest rom release here in UK was going to address all these problems too but I havent got around to upgrading yet, I hope it supports full headset profiles so I can originate calls from the headset as well as answering the call.
I have downloaded the new Rom update and it seems no different. I have tried a soft reset and this did not improve the situation.
I know the headset works fine as I use it with my nokia handset with no problem.
Has anyone got a Motorola 810 that works ok on the XDA ?
cruisin-thru said:
Have you installed towas bluetooth tools patch, this fixes a lot of problems with bonding and alos makes things work where they couldnt before. I was told that the latest rom release here in UK was going to address all these problems too but I havent got around to upgrading yet, I hope it supports full headset profiles so I can originate calls from the headset as well as answering the call.
Click to expand...
Click to collapse
did the bluetooth tools patch support voice dial from bluetooth headset? if not did anyone know the new rom from O2 works with this function? thanks!
Andy, no it doesnt support originate call from headset but it did allow lots of different gps and headsets to work, the headsets work for answer call/drop call only as far as I know, in the notes for the xda2 upgrade it mentions the headset profile but I dont know if anybody has hot the headset facility to work yet, I havent upgraded yet so I am yet to test it.
I have installed the new ROM and as far as I can see it does nothing for Bluetooth beyond fixing some compatibility issues on some headsets. It still only allows one headset profile (so if you have a headset and a handsfree kit as I do you need to delete bonded pairs when you change devices - now there's intelligent functionality!!). No headset dialing so still not a complete BT headset implementation. No handsfree support.
Anyone else think that the XDAII is a great PDA but about the worst apology for a GSM phone in the last 10 years?
If anyone can point me to a decent set of BT tools to add on let me know.
Not really.
I fully agree the XDAII is a poor phone, with the best agenda and contact list available, but that is!
I wonder if Phone-pda makers are really going the so called "convergence" way.
To date, and after many different PDA/phone/PDA-Phone devices I've tried, no one is even close to the mark.
Something so "simple" such as merging an OLD Ericsson (or Sony-Ericsson) T-68 phone abilities, with just a PPC 2002 (yes, not even 2003) PDA, should produce a combo, no machine on the market is even close to.
IT'S SO DIFFICULT?
:evil: :evil:

HP bluetooth headphones

Has anyone been able to make these headphones work with the wizard?
I have searched forums but cannot find a solution.
Hp do not have any drivers to install onto wm5 operating system.
Any help will be greatly appreciated.
you don't need drivers. Just use search to find the cab update en use them.
I've just received mine: they work perfectly!
just bought a set, Help
:?: Hello, I just bought a set of these off ebay, have t-mobile mda vario flashed with the cingular rom. I am reading your posts, but cannot figure out what you are talking about with the cab update. my device finds the hp headphones just fine, but there is no usage choices listed,how do I get these things to work? is there an install file I can download? Please help.
HasC,
I've got the Logitech one and they are the same as HP.
Power of the headphones and keep pressing the power button until the led flashes red.
Then you can connect it to the wizzard with the usual 0000 pin.
Did it with mine and it works.
Cheers,
Drifter
thanks for reply, but pairing not the problem
Hello, they paired just fine with the wizard, but how do I tell the wizard to play the audio through the headphones and not the internal speaker?
Drifter, you the man!!!
Mine is working beautifully now, your instruction to wait for red light to flash solved the problem.
Thanx
totally confused now???
Hello again, They are paired, but there is nothing listed in "Services to use from this device" List, is there some software or driver I need to install? is there some menu choice I need to select somewere. Please help.
jappetto,
I am also using the cingular ROM, all I did to make them work was to follow Drifter's example on pairing them. Once they were paired it just worked straight off any audio player that I used, eg Mort player or windows media player, WM allows me to forward tracks as well.
I really dont know why you are having trouble, try removing all bluetooth paired devices from your phone and pair the headphones first. This may help
Still confused
"cab update en" sounds like software I need to download. am I using the wrong rom?
tried deleting all and pairing headphones first.
sees them but there is no services listed to use. how do you tell media player to play through headphones? does it happen automatically when you turn yours on? or is there a button or command I am missing?
read all about the A2DP update in the Tornado forum as well as the A2DP threads here before you start to use your headsets. You will need A2DP to make these awsome HP headphones work to their fullest abilities.
Japetto,
I am using this ROM:
ftp://xda:[email protected]_RUU_WIZARD_217_AKU2_WWE_CF2_A2DP.exe
It has A2DP settings configured already.
When you pair the headphones with this ROM installed, make sure your volume is not on silent on phone (should adjust automatically) when using headphones. If you are using WM player and cannot hear sound through headphones, press round connect button between the volume and track forward/reverse buttons ( the same one used to pair the headphones). this should establish a link with the headphones and start working.
No other software/drivers are needed to make them work.
Hope this helps.
ive got the normal tmobile uk rom...would it work??
what its the quality of sound from the headphones...when compared to the headphones given with the MDA Vario
also could someone direct me to a link where i can buy them from
Thanks
I'll Try it
thank you HasC
SBouri,
No, you need to change ROM so that it is A2DP compliant, at present t-mobile have no ROMS for this, mine was originally T-mobile ROM.
The quality of the headphones are fantastic, they are better than vario supplied ones because they are wireless and I have had the phone upstairs and was able to listen from kitchen downstairs, occasionally there was some interference, but close range, worked seamlessly for me.
HasC, fair enough mate..ermm i'd rather not upgrade my rom as i dont want to take any risks which will turn it into a brick
i am a techi but the phone doesnt give problems as other people post about..so id rather just keep the current t mobile rom
thanks for the reply though
SBouri said:
HasC, fair enough mate..ermm i'd rather not upgrade my rom as i dont want to take any risks which will turn it into a brick
i am a techi but the phone doesnt give problems as other people post about..so id rather just keep the current t mobile rom
thanks for the reply though
Click to expand...
Click to collapse
You don't ned to upgrade your rom to get your stock Tmobile MDA to work with BT stereo headsets!
Just install the A2DP hack.cab found in this thread http://forum.xda-developers.com/viewtopic.php?t=48535&highlight=a2dp and your stereo headset should show all options for Handsfree, Headset and Wireless Stereo.
I have not upgraded my rom, as I agree with SBour, I *can* do it but it's not worth it to me just yet....
I am using the stock Tmobile Rom, the A2DP hack and I-Tech Clip s35 stereo headset. The sound is lound and crystal clear.
Jaidnoire, nice one mate, will give it a go and ill order the headphones asap...i found a site through kelkoo for £48...is that cheap compared to any other sites you may know of?
Can anyone tell me what the battery life is on the Motorola HT820? As i manily want to listen to MP3s of my Vario
The HT820 manual claims 14 hours for music listening or 17 hours talk time.

P3600i & Dell BH200 Headset - A2DP OK, HandsFree NOT OK

Hi guys,
I've been scouring the web for a number of days now with no success. Was wondering if anyone is experiencing the same problem and if anyone knows if this can be fixed.
I have a HTC P3600i, with ROM 3.00.707.18 (latest ENG ROM I could find) and have been using a Jabra BT8010 (firmware 1.33) for some months with no problems on A2DP or Handsfree (even switching back and forth is ok).
Have just got myself a new Dell BH200 stereo BT headset (for better bass) and while A2DP is working pretty fine (very nice), I'm finding that I can't use the headset for incoming or outgoing calls at all.
Everytime I try doing calls, the headset icon on the phone screen disappears after 5 or so seconds, and the headset itself switches off right after.
Am hoping someone can point me to the right direction, thanks..
Well two years later
I own a Dopod C730 and lo and behold I bought a Dell BH200 and I have the exact problem descibed above. I have the latest rom and I have tried reseting the smartphone all for naught.
Well I hope someone has figured this one out at some point or else I am going to be disappointed in my new Christmas gift
Well, I gave up and sold off my BH200 already. Am back to using the Jabra BT8010.
same problem here with my HTC Touch (3452). It's really frustrating to have to remove the headset every time u have to take a call. did anyone fimd a solution to this?
an123 said:
same problem here with my HTC Touch (3452). It's really frustrating to have to remove the headset every time u have to take a call. did anyone fimd a solution to this?
Click to expand...
Click to collapse
I am not using touch. Mine is Asus P535. WM6
Do double pairing. 2 diffrent mode
1) Hi Fi Stereo
2) Hands free
Music would mute when the call is recieved. When you end the call the music comes back.
myc said:
Mine is Asus P535. WM6. Do double pairing. 2 diffrent mode
1) Hi Fi Stereo
2) Hands free
Music would mute when the call is recieved. When you end the call the music comes back.
Click to expand...
Click to collapse
This didn't work for me at all, on my HTC P3600i with the Dell BH200 headset. Pairing was ok, but as soon as there was an incoming call, the Dell headset would ring, and then silence.. I'd also notice that the headset icon on my phone would disappear and the headset itself would turn off.
My Jabra BT8010 headset, on the other hand, paired just fine as both handsfree and wireless stereo device. In fact, I've ditched the BH200 and am using the BT8010 till now.
Well how come i aint see this thread . Ok now BH200 works fine and it has no issues ( as you guys should understand if it works with ASUS , NOKIA , SAMSUNG phone ).The problem is HTC's coding . It doesnt support AVRPS, thats the service which is necesary for Phone to switch to calls when received and switch back to music. Now jabra uses a different technology ... But you will have to compramise on the quality of music in BH200
( its awesome ) and more over it looks like a music head set any ways .
damn! is there any workaround? or is AVRPS hardware specific? after A2DP and AVRCP, no we have another acronym to add to the lexicon
Same problem here, tested BH200 with Universal WM6 and Touch HD, headphones switch off seemingly when they receive handsfree request.
Tested them with WM5, lo and behold, it worked. Now I wonder - how come that they work with WM5 BT stack and not with WM6? Any ideas?
Well, from what I gather, at least the good news is that AVRPS is not hardware-specific... so there should be a suitable workaround to this problem for anyone using WM6.
I bought my pair of Dell BH-200 headphones yesterday and while I'm absolutely thrilled by the perfect (at this price) sound quality when playing music, I'm rather annoyed by the fact that I have to take off my headphones every time I want to receive a call. After all, that's what a headset is for, right!?
In any case, here are the specs of my phone:
HTC Touch Elfin P3452, running an up-to-date Windows Mobile 6.1 (Onyx ROM)
I'm considering upgrading to Windows Mobile 6.5 these days to see if that would do the trick... has anyone of you guys tried the Dell headphones' headset compatibility when running WM 6.5? Going back to WM5 is definitely not a option, since I didn't quite enjoy the looks & ergonomics of that OS...
P.S.: Upgrading to WM 6.5 didn't do the trick, unfortunately So I'm pretty much stuck and I don't want to return the headphones since I really enjoy them, of course once I ignore how they don't actually function as a proper headset... Any help would be greatly appreciated!
I just found this fix for the situation:
http://social.microsoft.com/Forums/...s/thread/368efd50-ce24-453a-a31c-e6747c698082
Try setting the registry value:
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\UseESCO = DWORD:0
Click to expand...
Click to collapse
The best part is, it seems to be actually working (I'm with Touch HD with Win 6.1).

Problems with Jabra BT8040

Hey, is anyone using the bluetooth headset Jabra BT8040, When I first bought the headset, I had no problems using it. But I've noticed a few months ago, that whenever I use the device, the person I'm calling wont be able to hear me but I can hear them. Anyone have any ideas to solve this problem?
Similar problems
I've got the same earpiece and I've had some problems with it, including: unable to pair (or saying it's paired when it really isn't), unable to connect the BT on a call, and sometimes the earpiece will just disconnect from the phone (but the call will still remain active).
That last one is the closest I've come to your issue. I usually have to put the phone in discovery mode (and the earpiece) and try repairing them from scratch.
I've heard from others with this earpiece that they haven't had problems, but I don't know anyone who has this earpiece and the Raphael. Also, I've got the Motorola S9 bt headphones and I haven't had any problems with them. So, I'm not 100% it's the earpiece but then again it could be.
i have this jabra for about 6 months and had no problem at all with Raphael!
Changed ROM
I've just changed the ROM on my phone (as in signature line) so that may change things for me with the Jabra BT.
BPB21 said:
I've just changed the ROM...
Click to expand...
Click to collapse
Please post your results with your new ROM...David.
Updated ROM & BT
Black C5 said:
Please post your results with your new ROM...David.
Click to expand...
Click to collapse
I'm using the updated ROM and radio in my signature line with the Jabra BT8060 (wasn't it? whatever the one we were talking about in this post is) as well as a Motorola S9 and I pair it with my laptop for internet access that way. So far I have not had the same troubles with the Jabra BT as I used to. It could be due to updated drivers for the BT or the fact that I'm not using TF3D (just the new WM6.5 interface).
Either way, I'm having good results so far.
I spoke too soon on BT...
I've spoken too soon on BT. I was trying to get my Motorola S9 working so I could listen to music from my phone. No luck at all - it shows the S9 connected for both the calls and the the music, but it only works on calls and the music plays on the device with the speaker. And it was working just fine this morning. Bluetooth in general is so frustrating to me that I would literally remove it from every costom ROM I use EXCEPT for "Internet Sharing" (on an Acer laptop and netbook) over bluetooth and activesync with a PC. Not just with this phone, but seriously, with BT 2.0 it should work A LOT BETTER than it does.
I have similar issues with several different Moto H700's. I can hear them but they can not hear me. Possibly the BT drivers from HTC need a fix????

Possible to send all audio over bluetooth?

I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?

Categories

Resources