Database Users

ARRGH! - Constant Probs with ActiveSync

I love my everything about my MDA - However, MS ActiveSync is absolutely terrible to work with and with a mind of its own.
When I first start my PC, ActiveSync works flawlessly. I am able to update and sync my contacts and install programs with no hassle.
However, as the day goes on, it becomes increasingly moody. When I plug in the MDA, there is no indication of it connecting. No swirly green circle etc.. Control Panel does not even indicate that something is connected.
When I plug into the next USB port, there is a "Unknown Device" error. ActiveSync again doesn't activate. I've restarted the comp as well as soft-resetting the MDA but to no avail. I was advised to uninstall all the USB drivers but still no result.
Whats strange though is that the very next day, it works all fine again in the morning and the daily dismal continues! :roll: :x
Anybody else facing these problems? I've got ActiveSync 3.8 but also had the same problems with previous AS's. In fact, I've also tried different computers but to no avail!
Do you guys happen to know of an alternative? This spawn of Microsoft is driving me crazy!!

have you tried a differnt usb cable? and does your case effect how far the plug goes when you connect your Magician (assuming your using a case)? just seems like it might not be connecting properly all the time. I had issues similar to yours when i purchased a new sync cable, it had slightly shorter data pins where it connected to my Jam which were not contacting. so it would power up and windows would detect but it would give the same errors.
SpeedN

thanks for the reply mate.
Its strange as I had another miniUSB cable but the problem was still there last time I tried. Very strange - I just hope MS could iron out these problems - I've heard that they are trying to use AS to contest with BlackBerry.

hmmm...it looks like there may be a possible solution to all this. I've researched a bit and apparently ActiveSync only works at the USB port originally used to connect the phone hence why it wasn't recognized by the other port.
But my one wasn't working with either port anyway!
Another suggestion was to hard reset the Pocket PC as this is apparently a common problem. And guess what? it worked!
This suggest there being a problem with the actual PocketPC settings itself - more specifically the ActiveSync settings. As doing a Hard-Reset is quite an inconvenient thing to do, is there anyway to delete/reset the ActiveSync settings without hard resetting?
Thanks again and I hope this is of help to anyone

i had a problem with activesync as well. i was traveling so in that time i had synched my jam with maybe 4 different pc's with activesync, all on guest partnership except my laptop. so when got back it had all these problems with my desktop. for example when i explored my device through activesync and tried to copy something to the computer it would show the copy dialog box but then nothing would be on my pc. i just reformatted my har drive for other reasons and now it works fine.. so i guess reformatting and reinstalling xp works. i did a hard reset on my jam and that didnt do anything.

From time to time Activesync will lock itself up. So go to task manager and shut it down - it's 2 apps, something like wcecomm.exe and something else; there's a number of apps freeware that will do this for you- i'm at work so can't help you more with the filename.
Then restart activesync and reconnect as normal.
Sometimes it does bugger up, but I've only had to reinstall windows once with an SPV.
V

JasJar USB connection problem - please help

I 'suddenly' am unable to have my JasJar connected to Activesync. I have been successfully connecting the last two weeks and did not cahange anything to the PC's set-up.
I killed my antivirus and have no firewall software running.
I have a direct USB connection to my Laptop (no usb hub).
I have tried both Activesync V4.0 and V4.1.
I have deleted all partnerships to get a fresh start.
I have also tried to delete the PPC in the PC's device manager and connect again (I did notice the PPC was listed under the network adapters only, nothing was listed under the USB section).
Nothing seems to help and I am really desperate since I can not sync anything anymore now.
Any suggestions are more than welcome !
Thansk in advance,
Paul

have you tried another PC ? at least this way you can be sure that everything is ok .

I am travelling and will not have any access to another PC before the WE.... I did try another cable but got not lucky..

It does seem to work on another PC.
Anybody any suggestion as to what else I could try to make it work again?

firewall?, thats my pain on my work lappy, i have to vpn into work and that blocks my JJ, i get connecting but no connected, all i can do is disconnect from work which then opens the activesync ports back up. check 7438 and 5679 on your firewall

After a week with AS 4.0 I suddenly found that the only way I could get it to work was to soft reset the Jas Jar while connected. I'm guessing you've already tried that though...

yer, i forgot to say, i can only sync when my JJ has been off for 10+ seconds, if on i get a uab device error if off i connect no problems, this kinda leads me to think that the usb port is in a different mode when on to when on standby, but the usb hosting of devices appears not to be the reason

Carnivor said:
yer, i forgot to say, i can only sync when my JJ has been off for 10+ seconds, if on i get a uab device error if off i connect no problems, this kinda leads me to think that the usb port is in a different mode when on to when on standby, but the usb hosting of devices appears not to be the reason
Click to expand...
Click to collapse
I have the same problem. Get a kind of "USB not recognized" when the jasjar is on/open".
I close the Jasjar after having taken the USB out of course.
Then, after a while ( You say 10 seconds) it works fine and Activesync starts the job.
I can live with it. No soft reset needed.
Very positive to me is the fact that I can also connect to a USB HUB. So no need to plu it directly in my portable.
After connection I can open my little toy. (Gush how I love this thing)
Huib

Yes I have the same problem I only synk when the jasjar is turned off. Most probably one of the reasons apart from firewall issus is office 2003. They said to me from club-imate support that we need the newest office 2003 with sp1.

ActiveSync 4.0 or 4.1 refuses USB connection to EXEC

Dear All,
Please help, my new O2 EXEC is sitting here almost totally useless without ActiveSync.
I did a very stupid thing:
I plugged in the Exec via the USB cable before installing ActiveSync 4.0.
What used to happen (back inthe day 2001 etc) would be that windows would install its own driver for the portable device and then when you subsequently installed ActiveSync its drivers would not go in and hence ActiveSync would not recognise your device.
What is happening now seems like the same sort of issue in that now having installed ActveSync it is just sitting there saying no connection.
For ActiveSync 3.6 and below this is a documented problem and here is the fix
http://support.microsoft.com/kb/264693/en-us
BUT for me this does not work (well because there is no yellow unknown device in Device managers other devices).
In AUDIBLE terms
a) I get a du-duh sound when I plug in EXEC (like if you plugged in a USB key for example)
b) It shows up in the Device Manager-> Network Adapters as "Windows Mobile-based Device"
c) ActiveSync 4.0 or 4.1 does NOT give me the dulde-de-dah sound
d) ActiveSync shows no connections
Anybody any bright ideas? Surely I am not the only twonk to have inadvertently plugged in the EXEC first
Answers greatly appreciated.
BASICALLY HELP
PS: Have also looked at ActiveSync trouble shooter 2001, the ActiveSync 4.0 troubleshooting article from Msoft, tried switching off firewall, no result. Have tried deleting the Mobile-based Device, uninstalling AS 4.0, rebooting, reinstalling AS 4.0 or 4.1 then plugging EXEC,no good.
PPS: I convinced a friend to let me install AS 4.1 on his computer and then plugged in the EXEC and all was fine, so the EXEC itself is sound.

Maybe this will help:
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx

Sorry, didn't read your message good.
Just see now you already did looked at the link....
But another idea: if your device works on your friend PC, then why not
do a clean install for the OS on your own PC?
Maybe this will solve your problem.

Dodger,
Thanks for the thoughts. Well actually thinking about a reinstall of my computer due a moments lapse of concentration is a difficult undertaking. With the backup of the on computer databases as well as over 100 applications installed, I think this would take me several person days.
Currently my thoughts are to clone the partition and then do a windows "over install" onthe clone, but logically that will not work because <of course> the whole point of an over install is that the registry and all applications are preserved.
I spent over 3 solid hours of googling, installing, uninstalling drivers yesterday trying to fix and can't believe I am the only one who has had this problem!
Perhaps somebody with a working ActiveSync can elaborate how does the EXEC show up in device manager (when its plugged in and synced), and also what device driver XP and /or Windows 2003 server would be using.
Thanks mb.

I was facing similar issue. Solution? Yes, uninstall my firewall, connect and sync with my JasjAr and then install the Firewall with Jasjar already connected !

This may help:
Open network connections on ur PC so u can see all connections.
Make sure AS (PC side) is enabled for USB
turn off JJ and plug it in to USB
Turn on JJ whilst watching the window of netwrok connections on ur PC
A new connection icon should pop up, then MAYBE dissapear again
Right click this icon, before it dissapears, and check it's enabled, then select properties
Now check the following items:
- does top box say "windows mobile based device"
- click "configure"
- under configure, is there a button somewhere (mine's working so I can't recall exactly where) that says something like "enable mobile device". If so, then you need to click this.
If this all fails, then repeat but with another USB port. The reason for this seeming waste of time is that you will get a DIFFERENT "Local area connection nn" icon, which may work for you.

I cant believe there hasnt been one mention of rebooting your PC - Which I can assume you already have done?
What OS are you running on your PC?
I have only just got my MDA PRO but this may help! as I did the same thing and for a while XP Pro wouldnt recognise the device.
Uninstall ActiveSync
Reboot PC
Install Activesync V4.0
Plug in USB Device
If there is still a problem connecting you shoudl see a USB device not recognised in your deviuce manager.
It almost seems like there is a time you have to wait before XP will respond normally to you unplugging and replugging in the USB.
Failing this you may have to uninstall Activesync and tehn remove all activesync registry keys it may have left behind! Then reboot and start again!

Just having tisproblem now, this is pïss poor of MS to still be foisting off onto us this Activesync package in such a terible state.

I've just had activesync stop working on me. It would connect but then refuse to sync anything even though it previously worked fine. I think it got upset after I booted up the PC with the Exec connected.
Anyway an uninstall and reinstall of Activesync on the PC cured the problem. Not the most robust software though.

Moandal said:
I've just had activesync stop working on me. It would connect but then refuse to sync anything even though it previously worked fine. I think it got upset after I booted up the PC with the Exec connected.
Anyway an uninstall and reinstall of Activesync on the PC cured the problem. Not the most robust software though.
Click to expand...
Click to collapse
What works for me is to turn off the handheld, and connect the cable after that. Then turn on the device if needed. Works mot of the time then.... no excuse for MS though....

PPC does not connect to PC via USB

Hello, and thanks in adance for any help
My Magician (ROM 1.13) is no longer recognised by my PC when I connect it via USB.
The device charges, but It does not connect to sync.
PPC Activesync doe have an error rmessage;
"Verify your dialup or proxy settings"
• I have tried all the suggestions from MS Troubleshooting
• I have tried all the suggestions on this and other forums.
• I have tried disabling Firewall (Kerio)
• I have tried with upgrade to Activesync 4.5 (was previously trying with 3.8)
Coincidence? The PPC failed to connect after I installed SonicStage, and plugged in a friends MD player into the same USB cable.
?? I would have liked to try rolling back USB drivers - though not entirely sure which ones - MS Device Manager not very helpful in describing what USB controllers are actually for (i.e. USB Composite Device?) ... however
• I tried restoring PC to an earlier state via Ghost (to a point I know the connection worked) but still no joy.
So I am now conerned it may be a problem with the connection manager on the Magician itself.
I don't want to hard reset just yet because I need to sync (an have little faith/experience with xBackup - which just took close to 1 hour)
Any help/pointers most appreciated
===========================
I've been using the Magician for 1.5 years, pretty successfully - consider myself fairly adept in IT, though not a hardcore coder.
But his has me stumped.

argh double post

yup i had this happen a few times, totally ticked me off.
try deleting your activesync profile and re-syncing, backup ur contacts etc first in outlook on the pc side just to make sure you dont over sync something.
other than that id say a hard reset is on the cards

double post
I always try due-diligence in researching answers before posting for help.
UPDATE
I didn't mention the specifics of my trials, but I had tried deleting the partnership in Activesync, but the problem is that my Magician just doesn't connect.
I did a hard reset, and Ghosted my PC back, but even in this "virgin" setup the Magician doesn't connect.
Am pleased that xBackup did work completely - restored everything including installed apps and settings. Small comfort.
Am now convinced that the problem is with the mini-USB port on my Magician.
Will be sending it back under 2Year warranty.

8525 sync issues

Last week I hard reset my 8525 after having it about 2 mos because it had stopped syncing (and could probably use it anyways), and it was working fine for a while but suddenly will not sync again. I have Vista so I use Windows Mobile Device Center, and have the latest ROM. I am trying to find a fix without having to do another hard reset.
Some things I have already tried:
1. Deleting the current pairing with my laptop and re-pairing
2. Using the y-extension included
3. Soft resetting while it is and is not connected
4. With and without advanced network functionality (or whatever) checked
The thing is it shows the device connected in my system tray but the phone itself will not connect. Can anyone help me here? I could not get an answer in the AT&T forums. Thanks!

Delete any and all partnerships on the phone AS WELL AS the Computer. Try using a different USB port. If you are using one in a hub, plug it right into your computer, try different ports in general. Try and see if you can "set it up" to sync with another computer, to determine if its more your computer or your phone. Hope this helps.

I tried your suggestions, including connecting it to my desktop, which runs XP Pro with the latest activesync version. No luck. I also tried another USB cable. Had anyone ever tried contacting HTC with issues? Do they just give you generic info/point you to their FAQs?