I love my everything about my MDA - However, MS ActiveSync is absolutely terrible to work with and with a mind of its own.
When I first start my PC, ActiveSync works flawlessly. I am able to update and sync my contacts and install programs with no hassle.
However, as the day goes on, it becomes increasingly moody. When I plug in the MDA, there is no indication of it connecting. No swirly green circle etc.. Control Panel does not even indicate that something is connected.
When I plug into the next USB port, there is a "Unknown Device" error. ActiveSync again doesn't activate. I've restarted the comp as well as soft-resetting the MDA but to no avail. I was advised to uninstall all the USB drivers but still no result.
Whats strange though is that the very next day, it works all fine again in the morning and the daily dismal continues! :roll: :x
Anybody else facing these problems? I've got ActiveSync 3.8 but also had the same problems with previous AS's. In fact, I've also tried different computers but to no avail!
Do you guys happen to know of an alternative? This spawn of Microsoft is driving me crazy!!
have you tried a differnt usb cable? and does your case effect how far the plug goes when you connect your Magician (assuming your using a case)? just seems like it might not be connecting properly all the time. I had issues similar to yours when i purchased a new sync cable, it had slightly shorter data pins where it connected to my Jam which were not contacting. so it would power up and windows would detect but it would give the same errors.
SpeedN
thanks for the reply mate.
Its strange as I had another miniUSB cable but the problem was still there last time I tried. Very strange - I just hope MS could iron out these problems - I've heard that they are trying to use AS to contest with BlackBerry.
hmmm...it looks like there may be a possible solution to all this. I've researched a bit and apparently ActiveSync only works at the USB port originally used to connect the phone hence why it wasn't recognized by the other port.
But my one wasn't working with either port anyway!
Another suggestion was to hard reset the Pocket PC as this is apparently a common problem. And guess what? it worked!
This suggest there being a problem with the actual PocketPC settings itself - more specifically the ActiveSync settings. As doing a Hard-Reset is quite an inconvenient thing to do, is there anyway to delete/reset the ActiveSync settings without hard resetting?
Thanks again and I hope this is of help to anyone
i had a problem with activesync as well. i was traveling so in that time i had synched my jam with maybe 4 different pc's with activesync, all on guest partnership except my laptop. so when got back it had all these problems with my desktop. for example when i explored my device through activesync and tried to copy something to the computer it would show the copy dialog box but then nothing would be on my pc. i just reformatted my har drive for other reasons and now it works fine.. so i guess reformatting and reinstalling xp works. i did a hard reset on my jam and that didnt do anything.
From time to time Activesync will lock itself up. So go to task manager and shut it down - it's 2 apps, something like wcecomm.exe and something else; there's a number of apps freeware that will do this for you- i'm at work so can't help you more with the filename.
Then restart activesync and reconnect as normal.
Sometimes it does bugger up, but I've only had to reinstall windows once with an SPV.
V
Related
I 'suddenly' am unable to have my JasJar connected to Activesync. I have been successfully connecting the last two weeks and did not cahange anything to the PC's set-up.
I killed my antivirus and have no firewall software running.
I have a direct USB connection to my Laptop (no usb hub).
I have tried both Activesync V4.0 and V4.1.
I have deleted all partnerships to get a fresh start.
I have also tried to delete the PPC in the PC's device manager and connect again (I did notice the PPC was listed under the network adapters only, nothing was listed under the USB section).
Nothing seems to help and I am really desperate since I can not sync anything anymore now.
Any suggestions are more than welcome !
Thansk in advance,
Paul
have you tried another PC ? at least this way you can be sure that everything is ok .
I am travelling and will not have any access to another PC before the WE.... I did try another cable but got not lucky..
It does seem to work on another PC.
Anybody any suggestion as to what else I could try to make it work again?
firewall?, thats my pain on my work lappy, i have to vpn into work and that blocks my JJ, i get connecting but no connected, all i can do is disconnect from work which then opens the activesync ports back up. check 7438 and 5679 on your firewall
After a week with AS 4.0 I suddenly found that the only way I could get it to work was to soft reset the Jas Jar while connected. I'm guessing you've already tried that though...
yer, i forgot to say, i can only sync when my JJ has been off for 10+ seconds, if on i get a uab device error if off i connect no problems, this kinda leads me to think that the usb port is in a different mode when on to when on standby, but the usb hosting of devices appears not to be the reason
Carnivor said:
yer, i forgot to say, i can only sync when my JJ has been off for 10+ seconds, if on i get a uab device error if off i connect no problems, this kinda leads me to think that the usb port is in a different mode when on to when on standby, but the usb hosting of devices appears not to be the reason
Click to expand...
Click to collapse
I have the same problem. Get a kind of "USB not recognized" when the jasjar is on/open".
I close the Jasjar after having taken the USB out of course.
Then, after a while ( You say 10 seconds) it works fine and Activesync starts the job.
I can live with it. No soft reset needed.
Very positive to me is the fact that I can also connect to a USB HUB. So no need to plu it directly in my portable.
After connection I can open my little toy. (Gush how I love this thing)
Huib
Yes I have the same problem I only synk when the jasjar is turned off. Most probably one of the reasons apart from firewall issus is office 2003. They said to me from club-imate support that we need the newest office 2003 with sp1.
Dear All,
Please help, my new O2 EXEC is sitting here almost totally useless without ActiveSync.
I did a very stupid thing:
I plugged in the Exec via the USB cable before installing ActiveSync 4.0.
What used to happen (back inthe day 2001 etc) would be that windows would install its own driver for the portable device and then when you subsequently installed ActiveSync its drivers would not go in and hence ActiveSync would not recognise your device.
What is happening now seems like the same sort of issue in that now having installed ActveSync it is just sitting there saying no connection.
For ActiveSync 3.6 and below this is a documented problem and here is the fix
http://support.microsoft.com/kb/264693/en-us
BUT for me this does not work (well because there is no yellow unknown device in Device managers other devices).
In AUDIBLE terms
a) I get a du-duh sound when I plug in EXEC (like if you plugged in a USB key for example)
b) It shows up in the Device Manager-> Network Adapters as "Windows Mobile-based Device"
c) ActiveSync 4.0 or 4.1 does NOT give me the dulde-de-dah sound
d) ActiveSync shows no connections
Anybody any bright ideas? Surely I am not the only twonk to have inadvertently plugged in the EXEC first
Answers greatly appreciated.
BASICALLY HELP
PS: Have also looked at ActiveSync trouble shooter 2001, the ActiveSync 4.0 troubleshooting article from Msoft, tried switching off firewall, no result. Have tried deleting the Mobile-based Device, uninstalling AS 4.0, rebooting, reinstalling AS 4.0 or 4.1 then plugging EXEC,no good.
PPS: I convinced a friend to let me install AS 4.1 on his computer and then plugged in the EXEC and all was fine, so the EXEC itself is sound.
Maybe this will help:
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Sorry, didn't read your message good.
Just see now you already did looked at the link....
But another idea: if your device works on your friend PC, then why not
do a clean install for the OS on your own PC?
Maybe this will solve your problem.
Dodger,
Thanks for the thoughts. Well actually thinking about a reinstall of my computer due a moments lapse of concentration is a difficult undertaking. With the backup of the on computer databases as well as over 100 applications installed, I think this would take me several person days.
Currently my thoughts are to clone the partition and then do a windows "over install" onthe clone, but logically that will not work because <of course> the whole point of an over install is that the registry and all applications are preserved.
I spent over 3 solid hours of googling, installing, uninstalling drivers yesterday trying to fix and can't believe I am the only one who has had this problem!
Perhaps somebody with a working ActiveSync can elaborate how does the EXEC show up in device manager (when its plugged in and synced), and also what device driver XP and /or Windows 2003 server would be using.
Thanks mb.
I was facing similar issue. Solution? Yes, uninstall my firewall, connect and sync with my JasjAr and then install the Firewall with Jasjar already connected !
This may help:
Open network connections on ur PC so u can see all connections.
Make sure AS (PC side) is enabled for USB
turn off JJ and plug it in to USB
Turn on JJ whilst watching the window of netwrok connections on ur PC
A new connection icon should pop up, then MAYBE dissapear again
Right click this icon, before it dissapears, and check it's enabled, then select properties
Now check the following items:
- does top box say "windows mobile based device"
- click "configure"
- under configure, is there a button somewhere (mine's working so I can't recall exactly where) that says something like "enable mobile device". If so, then you need to click this.
If this all fails, then repeat but with another USB port. The reason for this seeming waste of time is that you will get a DIFFERENT "Local area connection nn" icon, which may work for you.
I cant believe there hasnt been one mention of rebooting your PC - Which I can assume you already have done?
What OS are you running on your PC?
I have only just got my MDA PRO but this may help! as I did the same thing and for a while XP Pro wouldnt recognise the device.
Uninstall ActiveSync
Reboot PC
Install Activesync V4.0
Plug in USB Device
If there is still a problem connecting you shoudl see a USB device not recognised in your deviuce manager.
It almost seems like there is a time you have to wait before XP will respond normally to you unplugging and replugging in the USB.
Failing this you may have to uninstall Activesync and tehn remove all activesync registry keys it may have left behind! Then reboot and start again!
Just having tisproblem now, this is pïss poor of MS to still be foisting off onto us this Activesync package in such a terible state.
I've just had activesync stop working on me. It would connect but then refuse to sync anything even though it previously worked fine. I think it got upset after I booted up the PC with the Exec connected.
Anyway an uninstall and reinstall of Activesync on the PC cured the problem. Not the most robust software though.
Moandal said:
I've just had activesync stop working on me. It would connect but then refuse to sync anything even though it previously worked fine. I think it got upset after I booted up the PC with the Exec connected.
Anyway an uninstall and reinstall of Activesync on the PC cured the problem. Not the most robust software though.
Click to expand...
Click to collapse
What works for me is to turn off the handheld, and connect the cable after that. Then turn on the device if needed. Works mot of the time then.... no excuse for MS though....
I have done a hard reset just to check this out, but when I am syncing I get a slowdown on the wizard that persists when disconnected from the USB cable. I then have to soft reset and all is well again until I connect.
I have to admit I am not running SP2 on the XP machine I sync with.
Anyone found this or found a solution?
Thanks,
Joe
I have exactly the same. But with XP SP2 on the PC and Norwegian ROM on the Wizard
Same here.
First sync after Softreset works great. 2nd sync normaly slows down device.
(AS 4.1, Win XP SP2, qtec 9100, 1.3.7.12 NOR)
Thilo
Yes you're right. That's how it works.
Anyone else? If enough people have the problem then maybe we can either put pressure on M$/HTC to tell us how to workaround it or alternatively a guru may take pity on us :lol:
Joe
Have only experienced this issue when the synch is hanging and I end up disconnecting the device during the synch. Only solution to that I have found is to close the comm managers for activesync in the task manager before disconnecting and then everything is fine. As to getting someone at M$ to take notice...... lets face it activesync 4.1 is a pile of junk only exceeded by 4.0. Wm2003 and 3.7 just worked. If M$ can't develop an interface between a piece of M4 software and another piece of M$ software without the device having to be soft reset (or the PC rebooted) every third synch then they ought to be put down.
Same problem here with SP2 and Qtek WWE Rom.
The first sync works well, but if i want to sync for a 2nd time i have to reboot either the Wizard or the pc.
Well, turn of events. I did a hard reset as I said, and have installed only spb gprs monitor, ae button plus, ms reader, gsplayer, vito tube london thingy and tomtom.
so far it hasn't done the crash thing. many syncs down the line and no slowdown.
so could it be software related?
did the people here have tcpmp?
what are you running if you also suffer from this problem?
joe
I find it happens if I accidentally press the power button whilst connected - this disconnects the XDA mini S and when I turn the power back on Activesync seems to repeatedly display 'connecting' and the XDA becomes slow to the point of useless.
and i spoke too soon, it's happening again :-(
same here, my Qtek 9100 1.6.7.1 WWE nearly stop respond while activesyncing....
devros said:
I find it happens if I accidentally press the power button whilst connected - this disconnects the XDA mini S and when I turn the power back on Activesync seems to repeatedly display 'connecting' and the XDA becomes slow to the point of useless.
Click to expand...
Click to collapse
And I spoke too soon. Seems that after every activesync, my Mini S is now requiring a soft-reset - WTF?
Only started today...?
Si.
Same thing happens to me, it's so slow to sync on the pc, but the only solution i found to not make your phone slow after syncing is not to disconnet or switch your phone off when it is syncronizing, as soon as you plug it in to your pc, leave it until it has fully synced, once done you can disconnect it and it will work fine, if you disconnect it in the middle of a sync it will be slow and you have to reset it, either way active syncing to the pc is still very slow...so there is a problem indeed...it's the same for active sync 4.0, so it's a problem with the phone I believe, I had an XDA2s upgraded to WIndows Mobile 5.0 and that was working fine with Active sync 4.0, no slowdown at all at synced very fast so it's not OS related..
Just installed the Qtek ROm wiht the AKU2 update adn the device seems much faster and best of all no slow active sync, works perfectly no crashes whatsoever...
Where did you got one with AKU2 already? :shock: I want it I want it I want it!
Same problem here with the Cingular 8125
Activesync slowdown
I have been doing a scout around and it appears to be a problem with things in the today screen. Unfortunately the only workaround (as i seem to have tested quickly) is to untick everything from your today screen and it wont slow right down and freeze.
BUMP!
I've encountered this problem in a big way after trying to sync my PC with Outlook.
- It syncs when you plug it in perfectly
- It stays in sync if you leave it plugged in
- If you unplug it and soft reset before reconnecting then it's fine
- If you plug it back in, XDA goes s-l-o-o-o-w and then freezes and will NOT re-sync (although you can still explore it!)
Obviously that's not acceptable... you can't be expected to reset your phone every time you disconnect it to make a call or whatever.
HOWEVER you're right - it does NOT hang if you remove all the Outlook items (messaging, tasks, calendar) from your today screen
That's my current fix to the problem although i see it more as a temporary workaround... the today screen is useful and the device looks dull with no menus on the default page.
Has anyone managed to fix this in any other way?
Just to add to that... after extensive syncing and rebooting I can confirm that you're OK to have the date, the battery power meter and the device locked/unlocked tools on the screen... and it will still synch okay. I reckon the personal info will probably work as well.
Anything other than that and you'd better enjoy soft resetting because you're going to be doing it a lot.
Anyone know who at Microsoft I would email about this?
[email protected]
same with me... though I had not correlated this with any items on the today screen... but many times I have noted that I need to reboot after syncing and removing the usb cable.. I can't get to resync..it says connecting on the pc but never connects...
I have so many problems with ActiveSync it's not funny any more....
I never had THIS many problems with WM2003SE and AS 3.8, now I get lock ups on both machines, regularly not sync'ing at all for no reason, WM Player on the PC crashing (I sync my music to a mini SD card) etc etc.
I have re-installed both PC AS and complete re-instal of WM5 (Both 1.6.x.x and 2.8.x.x) both have issues though not quite so bad with 2.8.x.x
C'mon MS, get your act together.
If this many users are having the same problems it isn't because we are ALL doing something wrong its your poor software. This is a fundamental item of these devices and to have it as tempramental (Is that spelt correctly??) as this is not acceptable. This facility needs to be "Plug and Play" not "Plug and Pray". They must realise this during in-house development of WM5 as they surely use it for their transfers??!!?
Oh, and bring back the f**king network sync, I used to use my device on the road simply sync'ing via GPRS to my always on PC or in the home via WiFi. Now I have to purchase a full Exchange Server??? I think not!
Hmmm, WM5, two steps forward one step back?
SORRY, rant over now....
No computer detects my TyTN anymore. Not even to display the "New Hardware Found" message that I usually get when plugging the TyTN into a USB port of a computer that hasn't seen the device before. Nothing. The phone still charges and the it still knows when its plugged by the icon on the lower right corner of the screen.
I've searched the forum for this very issue, and found mostly activesync issues/solutions. I've tried them all with no success. BTW activesync works for me via bluetooth. My last resort was a hard reset. Three times... (read from one of the posts). Now I'm stuck with a TyTN with a Dopod ROM.
Has anyone experienced this problem?
I tell you, having a kick-ass phone but without a way to push the customization files into it is TORTURE.
Please help.
I had a smiliar problem when I Installed XP-MCE.
I solved it by downloading the latest Active Sync and Installing it, From there windows picked it up as a Mobile Device.
jford04 said:
I had a smiliar problem when I Installed XP-MCE.
I solved it by downloading the latest Active Sync and Installing it, From there windows picked it up as a Mobile Device.
Click to expand...
Click to collapse
Thanks for the reply. I use ActiveSync 4.5 on Win2K, XP and XPMCE. The computers are not able to detect it at all.
Reinstall Activesync
Try reinstalling Activesync (which will uninstall the earlier install of the same or earlier version). This worked for me. I face this problem once too often coz I sync with my desktop and laptop.
try deleting the partnership on the phone and then try plugging it in, make sure all the partnerships on the phone are deleted, i had the same issue with my tytn and that solved it.
Another issue i had was that windows was detecting the device but still would not allow it to connect , so what i did there was just go into computer management (right click on my computer then click manage) and uninstall the device while it was connected then unplug and plug it back in and windows re-detected it. Also make sure you have the atest version of active sync installed.
Hope this helps
Check device manager - does it even refresh when you plug your device in?
If it does not, you may have a big problem...
Have you tried an alternate USB cable? It could be that that is shot.
Have you still got the min-USB headphones? If so, do they still work?
If they do not work either, that would suggest that the device's USB port port is shoddy...
And reality sinks in...
yrreP said:
Check device manager - does it even refresh when you plug your device in?
If it does not, you may have a big problem...
Have you tried an alternate USB cable? It could be that that is shot.
Have you still got the min-USB headphones? If so, do they still work?
If they do not work either, that would suggest that the device's USB port port is shoddy...
Click to expand...
Click to collapse
Yeah, I think the USB port on my TyTN is partially dead. This feels like being with Verizon and their locked phones. Sucks wet cow butt.
Oh well, I'll just learn to live with my Dopodish phone until HTC comes out with TyTN III.
Thank you all who replied.
2 days ago I lost my active sync it just doesn't work, I connect my device to my pc and i doesn't even light the screen though it does charge :S... I've tried everything possible: Hard reset, Task29, flashed a few rooms (throught bootscreen and SD card) tried in a different PC but nothing seem to work. My X1 does do active sync in the same PC. I don't know what else to do... has anyone got a clue of what to do?... Thanks.
Maybe stupid but, have you tried other USB ports?
Sent from my HTC HD2 using XDA App
wazaaappp said:
2 days ago I lost my active sync it just doesn't work, I connect my device to my pc and i doesn't even light the screen though it does charge :S... I've tried everything possible: Hard reset, Task29, flashed a few rooms (throught bootscreen and SD card) tried in a different PC but nothing seem to work. My X1 does do active sync in the same PC. I don't know what else to do... has anyone got a clue of what to do?... Thanks.
Click to expand...
Click to collapse
Try removing and reinstalling activesync and make sure you do a reboot inbetween. I had this problem once and a hard reset fixed it but that was only because the problem i had was phone side (server side) and not with the pc (client side)
As I said I tried in another PC and it didn't work either, but my Xperia X1 does work so the usb port is all right... Forgot to mention that on NRGZ roms sense looks quite messy now even on the roms I know are workin properly, and everytime I reebot the mob the navipanel pops out, now I change to another ROM and the sense seems ok but the home button pops out the navipanel. Its so strange :S:S!
wazaaappp said:
As I said I tried in another PC and it didn't work either, but my Xperia X1 does work so the usb port is all right... Forgot to mention that on NRGZ roms sense looks quite messy now even on the roms I know are workin properly, and everytime I reebot the mob the navipanel pops out, now I change to another ROM and the sense seems ok but the home button pops out the navipanel. Its so strange :S:S!
Click to expand...
Click to collapse
In that case i can't help with the activesync issue but the navipanel issue is solved by disabling the auto detection. It is possible that the two are linked but i had the navipanel problem with the most recent energy rom and implemented the fix and all is well
M3PH said:
In that case i can't help with the activesync issue but the navipanel issue is solved by disabling the auto detection. It is possible that the two are linked but i had the navipanel problem with the most recent energy rom and implemented the fix and all is well
Click to expand...
Click to collapse
so how do I disable that? and whr is the fix? cheers.
Still waiting for answers about the Active sync...
Thanks.
wazaaappp said:
so how do I disable that? and whr is the fix? cheers.
Still waiting for answers about the Active sync...
Thanks.
Click to expand...
Click to collapse
Have you disable the "Enable faster data synchronization" thing?
Mine only syncs that way... It stopped syncing with faster sync some time ago...
wazaaappp said:
2 days ago I lost my active sync it just doesn't work, I connect my device to my pc and i doesn't even light the screen though it does charge :S... I've tried everything possible: Hard reset, Task29, flashed a few rooms (throught bootscreen and SD card) tried in a different PC but nothing seem to work. My X1 does do active sync in the same PC. I don't know what else to do... has anyone got a clue of what to do?... Thanks.
Click to expand...
Click to collapse
Hi, I have had same problem... spent around 2 days on Google and found a likely cause for that... Is there any chance that you phone got wet or short circuit a mini USB port... Anyways, have a look this forum and my post at the end...
http://forum.xda-developers.com/showthread.php?p=8382137
Hope it helps
when my ActiveSync stops working, the thing that usually help is "reinitiating" the connection - you could try step described here
p107r0 said:
when my ActiveSync stops working, the thing that usually help is "reinitiating" the connection - you could try step described here
Click to expand...
Click to collapse
Thanks for trying to help, this page is very helpful when device is recognized by PC, but has ActiveSync profile mismatch. The first thing that I did is I've disabled fast sync on HD2, then I've deleted all profiles and their traces on PC and HD2 as well. Usually it helps when you plug in the phone, computer acknowledges it, but pop in warning sign that USB device is not recognized or recognizes it but fails to initiate ActiveSync. In my case there was no reaction (on multiple computers) - like nothing is plugged in... Will see what repairer says... I'll post an update as soon as I'll hear from them.
Grisha24 said:
Thanks for trying to help, this page is very helpful when device is recognized by PC, but has ActiveSync profile mismatch. The first thing that I did is I've disabled fast sync on HD2, then I've deleted all profiles and their traces on PC and HD2 as well. Usually it helps when you plug in the phone, computer acknowledges it, but pop in warning sign that USB device is not recognized or recognizes it but fails to initiate ActiveSync. In my case there was no reaction (on multiple computers) - like nothing is plugged in... Will see what repairer says... I'll post an update as soon as I'll hear from them.
Click to expand...
Click to collapse
Yeah I have the same problem any PC just doesn't recognize the usb connection.
The link above covers what I'd try next in a round and about way.
Can you connect to your PC by cable in disk drive mode (>>Settings>>Other>>USB to PC)? Can you connect ActiveSync via BlueTooth? Can you synchronize with gMail using the Exchange settings for the service? The above tests should give a better idea as to where the problem is; whether with ActiveSync or the USB connection.
There's a great site covering ActiveSync problems. It's out of date but still relevant. Search for ActiveSync Troubleshooter by Chris de Herra.
I had problems with active sync a while ago.
The HD2 would charge but was not recognised by active sync.
If you put the phone into bootloader it says 'serial' at the bottom of the screen
When you connect it to your pc via usb, this should change to 'usb'
Mine didn't.....and a bit of reading around showed that this means the usb socket is faulty.
I sent mine back to HTC and they replaced the motherboard and I've had no problem since.
ericjennings said:
I had problems with active sync a while ago.
The HD2 would charge but was not recognised by active sync.
If you put the phone into bootloader it says 'serial' at the bottom of the screen
When you connect it to your pc via usb, this should change to 'usb'
Mine didn't.....and a bit of reading around showed that this means the usb socket is faulty.
I sent mine back to HTC and they replaced the motherboard and I've had no problem since.
Click to expand...
Click to collapse
Thanks for sharing!
People, come a little help, no way can I synchronize the phone with Windows, I have Windows 7, and installed Windows Mobile Device Center, but they can not sync to make, that would later be some ROM and Radio ROM I put, these are unic few days. I went to microsoft and my phone and there I upload everything and write synchronization is successful, but when Connecting your phone and choose sync anything, open the Mobile Device Center and not conected! Does anyone know the easiest way to sync? I would be eternally grateful to him!
I have another problem, the computer I see the SD card, a phone? I do not know what the problem was that I somehow know to help me, not I need to do factory reset because I have 450 phone numbers, and I can not seem to sync them! Means when I go to Start / Settings / sd card & phone storage, no write down my sd card? And all the programs that are on the card normally do not work! I ask for help!
Thanks in advance!
Got the same problem with Windows 7. Should have stayed with good old XP. Is there no way to get this so called driver?
Have you tried a different USB / microUSB cable?
I had one with a single broken wire that wouldn't charge but would pass data. Maybe you have a broken data wire.
my HD2 came back from repair
I've got my HD2 back from repair centre... and it works fine... most bizar part is paper say that nothing was done...