8525 sync issues - 8525, TyTN, MDA Vario II, JasJam General

Last week I hard reset my 8525 after having it about 2 mos because it had stopped syncing (and could probably use it anyways), and it was working fine for a while but suddenly will not sync again. I have Vista so I use Windows Mobile Device Center, and have the latest ROM. I am trying to find a fix without having to do another hard reset.
Some things I have already tried:
1. Deleting the current pairing with my laptop and re-pairing
2. Using the y-extension included
3. Soft resetting while it is and is not connected
4. With and without advanced network functionality (or whatever) checked
The thing is it shows the device connected in my system tray but the phone itself will not connect. Can anyone help me here? I could not get an answer in the AT&T forums. Thanks!

Delete any and all partnerships on the phone AS WELL AS the Computer. Try using a different USB port. If you are using one in a hub, plug it right into your computer, try different ports in general. Try and see if you can "set it up" to sync with another computer, to determine if its more your computer or your phone. Hope this helps.

I tried your suggestions, including connecting it to my desktop, which runs XP Pro with the latest activesync version. No luck. I also tried another USB cable. Had anyone ever tried contacting HTC with issues? Do they just give you generic info/point you to their FAQs?

Related

ARRGH! - Constant Probs with ActiveSync

I love my everything about my MDA - However, MS ActiveSync is absolutely terrible to work with and with a mind of its own.
When I first start my PC, ActiveSync works flawlessly. I am able to update and sync my contacts and install programs with no hassle.
However, as the day goes on, it becomes increasingly moody. When I plug in the MDA, there is no indication of it connecting. No swirly green circle etc.. Control Panel does not even indicate that something is connected.
When I plug into the next USB port, there is a "Unknown Device" error. ActiveSync again doesn't activate. I've restarted the comp as well as soft-resetting the MDA but to no avail. I was advised to uninstall all the USB drivers but still no result.
Whats strange though is that the very next day, it works all fine again in the morning and the daily dismal continues! :roll: :x
Anybody else facing these problems? I've got ActiveSync 3.8 but also had the same problems with previous AS's. In fact, I've also tried different computers but to no avail!
Do you guys happen to know of an alternative? This spawn of Microsoft is driving me crazy!!
have you tried a differnt usb cable? and does your case effect how far the plug goes when you connect your Magician (assuming your using a case)? just seems like it might not be connecting properly all the time. I had issues similar to yours when i purchased a new sync cable, it had slightly shorter data pins where it connected to my Jam which were not contacting. so it would power up and windows would detect but it would give the same errors.
SpeedN
thanks for the reply mate.
Its strange as I had another miniUSB cable but the problem was still there last time I tried. Very strange - I just hope MS could iron out these problems - I've heard that they are trying to use AS to contest with BlackBerry.
hmmm...it looks like there may be a possible solution to all this. I've researched a bit and apparently ActiveSync only works at the USB port originally used to connect the phone hence why it wasn't recognized by the other port.
But my one wasn't working with either port anyway!
Another suggestion was to hard reset the Pocket PC as this is apparently a common problem. And guess what? it worked!
This suggest there being a problem with the actual PocketPC settings itself - more specifically the ActiveSync settings. As doing a Hard-Reset is quite an inconvenient thing to do, is there anyway to delete/reset the ActiveSync settings without hard resetting?
Thanks again and I hope this is of help to anyone
i had a problem with activesync as well. i was traveling so in that time i had synched my jam with maybe 4 different pc's with activesync, all on guest partnership except my laptop. so when got back it had all these problems with my desktop. for example when i explored my device through activesync and tried to copy something to the computer it would show the copy dialog box but then nothing would be on my pc. i just reformatted my har drive for other reasons and now it works fine.. so i guess reformatting and reinstalling xp works. i did a hard reset on my jam and that didnt do anything.
From time to time Activesync will lock itself up. So go to task manager and shut it down - it's 2 apps, something like wcecomm.exe and something else; there's a number of apps freeware that will do this for you- i'm at work so can't help you more with the filename.
Then restart activesync and reconnect as normal.
Sometimes it does bugger up, but I've only had to reinstall windows once with an SPV.
V

ActiveSync 4.0 or 4.1 refuses USB connection to EXEC

Dear All,
Please help, my new O2 EXEC is sitting here almost totally useless without ActiveSync.
I did a very stupid thing:
I plugged in the Exec via the USB cable before installing ActiveSync 4.0.
What used to happen (back inthe day 2001 etc) would be that windows would install its own driver for the portable device and then when you subsequently installed ActiveSync its drivers would not go in and hence ActiveSync would not recognise your device.
What is happening now seems like the same sort of issue in that now having installed ActveSync it is just sitting there saying no connection.
For ActiveSync 3.6 and below this is a documented problem and here is the fix
http://support.microsoft.com/kb/264693/en-us
BUT for me this does not work (well because there is no yellow unknown device in Device managers other devices).
In AUDIBLE terms
a) I get a du-duh sound when I plug in EXEC (like if you plugged in a USB key for example)
b) It shows up in the Device Manager-> Network Adapters as "Windows Mobile-based Device"
c) ActiveSync 4.0 or 4.1 does NOT give me the dulde-de-dah sound
d) ActiveSync shows no connections
Anybody any bright ideas? Surely I am not the only twonk to have inadvertently plugged in the EXEC first
Answers greatly appreciated.
BASICALLY HELP
PS: Have also looked at ActiveSync trouble shooter 2001, the ActiveSync 4.0 troubleshooting article from Msoft, tried switching off firewall, no result. Have tried deleting the Mobile-based Device, uninstalling AS 4.0, rebooting, reinstalling AS 4.0 or 4.1 then plugging EXEC,no good.
PPS: I convinced a friend to let me install AS 4.1 on his computer and then plugged in the EXEC and all was fine, so the EXEC itself is sound.
Maybe this will help:
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
Sorry, didn't read your message good.
Just see now you already did looked at the link....
But another idea: if your device works on your friend PC, then why not
do a clean install for the OS on your own PC?
Maybe this will solve your problem.
Dodger,
Thanks for the thoughts. Well actually thinking about a reinstall of my computer due a moments lapse of concentration is a difficult undertaking. With the backup of the on computer databases as well as over 100 applications installed, I think this would take me several person days.
Currently my thoughts are to clone the partition and then do a windows "over install" onthe clone, but logically that will not work because <of course> the whole point of an over install is that the registry and all applications are preserved.
I spent over 3 solid hours of googling, installing, uninstalling drivers yesterday trying to fix and can't believe I am the only one who has had this problem!
Perhaps somebody with a working ActiveSync can elaborate how does the EXEC show up in device manager (when its plugged in and synced), and also what device driver XP and /or Windows 2003 server would be using.
Thanks mb.
I was facing similar issue. Solution? Yes, uninstall my firewall, connect and sync with my JasjAr and then install the Firewall with Jasjar already connected !
This may help:
Open network connections on ur PC so u can see all connections.
Make sure AS (PC side) is enabled for USB
turn off JJ and plug it in to USB
Turn on JJ whilst watching the window of netwrok connections on ur PC
A new connection icon should pop up, then MAYBE dissapear again
Right click this icon, before it dissapears, and check it's enabled, then select properties
Now check the following items:
- does top box say "windows mobile based device"
- click "configure"
- under configure, is there a button somewhere (mine's working so I can't recall exactly where) that says something like "enable mobile device". If so, then you need to click this.
If this all fails, then repeat but with another USB port. The reason for this seeming waste of time is that you will get a DIFFERENT "Local area connection nn" icon, which may work for you.
I cant believe there hasnt been one mention of rebooting your PC - Which I can assume you already have done?
What OS are you running on your PC?
I have only just got my MDA PRO but this may help! as I did the same thing and for a while XP Pro wouldnt recognise the device.
Uninstall ActiveSync
Reboot PC
Install Activesync V4.0
Plug in USB Device
If there is still a problem connecting you shoudl see a USB device not recognised in your deviuce manager.
It almost seems like there is a time you have to wait before XP will respond normally to you unplugging and replugging in the USB.
Failing this you may have to uninstall Activesync and tehn remove all activesync registry keys it may have left behind! Then reboot and start again!
Just having tisproblem now, this is pïss poor of MS to still be foisting off onto us this Activesync package in such a terible state.
I've just had activesync stop working on me. It would connect but then refuse to sync anything even though it previously worked fine. I think it got upset after I booted up the PC with the Exec connected.
Anyway an uninstall and reinstall of Activesync on the PC cured the problem. Not the most robust software though.
Moandal said:
I've just had activesync stop working on me. It would connect but then refuse to sync anything even though it previously worked fine. I think it got upset after I booted up the PC with the Exec connected.
Anyway an uninstall and reinstall of Activesync on the PC cured the problem. Not the most robust software though.
Click to expand...
Click to collapse
What works for me is to turn off the handheld, and connect the cable after that. Then turn on the device if needed. Works mot of the time then.... no excuse for MS though....

USB connectivity issues

No computer detects my TyTN anymore. Not even to display the "New Hardware Found" message that I usually get when plugging the TyTN into a USB port of a computer that hasn't seen the device before. Nothing. The phone still charges and the it still knows when its plugged by the icon on the lower right corner of the screen.
I've searched the forum for this very issue, and found mostly activesync issues/solutions. I've tried them all with no success. BTW activesync works for me via bluetooth. My last resort was a hard reset. Three times... (read from one of the posts). Now I'm stuck with a TyTN with a Dopod ROM.
Has anyone experienced this problem?
I tell you, having a kick-ass phone but without a way to push the customization files into it is TORTURE.
Please help.
I had a smiliar problem when I Installed XP-MCE.
I solved it by downloading the latest Active Sync and Installing it, From there windows picked it up as a Mobile Device.
jford04 said:
I had a smiliar problem when I Installed XP-MCE.
I solved it by downloading the latest Active Sync and Installing it, From there windows picked it up as a Mobile Device.
Click to expand...
Click to collapse
Thanks for the reply. I use ActiveSync 4.5 on Win2K, XP and XPMCE. The computers are not able to detect it at all.
Reinstall Activesync
Try reinstalling Activesync (which will uninstall the earlier install of the same or earlier version). This worked for me. I face this problem once too often coz I sync with my desktop and laptop.
try deleting the partnership on the phone and then try plugging it in, make sure all the partnerships on the phone are deleted, i had the same issue with my tytn and that solved it.
Another issue i had was that windows was detecting the device but still would not allow it to connect , so what i did there was just go into computer management (right click on my computer then click manage) and uninstall the device while it was connected then unplug and plug it back in and windows re-detected it. Also make sure you have the atest version of active sync installed.
Hope this helps
Check device manager - does it even refresh when you plug your device in?
If it does not, you may have a big problem...
Have you tried an alternate USB cable? It could be that that is shot.
Have you still got the min-USB headphones? If so, do they still work?
If they do not work either, that would suggest that the device's USB port port is shoddy...
And reality sinks in...
yrreP said:
Check device manager - does it even refresh when you plug your device in?
If it does not, you may have a big problem...
Have you tried an alternate USB cable? It could be that that is shot.
Have you still got the min-USB headphones? If so, do they still work?
If they do not work either, that would suggest that the device's USB port port is shoddy...
Click to expand...
Click to collapse
Yeah, I think the USB port on my TyTN is partially dead. This feels like being with Verizon and their locked phones. Sucks wet cow butt.
Oh well, I'll just learn to live with my Dopodish phone until HTC comes out with TyTN III.
Thank you all who replied.

I am unable to ActiveSync

I got a x7500 from ebay and the device works great except unable to activesync via usb or bluetooth so I cannot install certain applications and sync up with outlook. Also none of my three computers do not see the device when connect to usb it only charges the device. I can however ftp and send obx files via bluetooth. I aslo tried resco explorer and set up some shared folders but unabe to see them via network. I also have tried the usb to pc checked and unchecked and the usbsettings.exe via turbo, normal and media and no luck whatsoever. I have even hard reset the device and tried everything again and nothings different same effect. Any Ideas. I tried four different cables, three pc's, 4.5, 4.2 and 4.1 activesync. tried bluetooth,. really fustrating.
PC's are Windows XP
Advantage is WM6
Rom is AP Touch 3.0
James
got Activesync working but.... Now Saying Port Unavailable
I got Activesync working by changing to Black AP Dual 3.0 and was able to activesync for about 3 days via Bluetooth (still unable to sync via cable). but now saying port is available.
I have closed all applications on both the device and the pc and even did a soft reset and still unable to activesync.
Any Ideas.
any place to look at the com ports in Regedit??????? Maybe something is hung up in there,
james
Try this
In your athena go to settings>connections>USB to PC, untick enable advanced network functionality (leave the square blank)
hope it works
That did not work, but thanks
That did not work, but thanks. But did get is going again by deleting the partnership and deleting the bluetooth from my hardware on my pc and restarting the pC and finding new hardware and creating new partnership...
But still unable to connect via cable.
James
activesync problems
I, too, had that problem. I tried a different usb cable and everything works fine. I continue to have 'issues' with the stock cabl that came with the phone.
I tried everything else, ran out of ideas, so I tried the simplest thing.
steve
activesync problems
I tried that already have about 8-10 mini-usb cables around and tried everyone, but no luck.
Have you thought about a "hard reset". I had a similar problem with a HTC T-mobile DASH and it did the trick. Good luck...TJ
I am unable to Activesync
Yes, I have tried a hard reset no luck, but got Bluetooth ActiveSync going by installing AP Black Touch 3.0
You may want to try flashing an OEM ROM using the SD method. Test that an if it works, reflash PK3.0 Dual. Sometimes flashing successive custom ROMs can perpetuate a file error. Flashing back to OEM seems to clear up a lot of issues. Otherwise you may have lifted contacts on your motherboard. If so, call PocketPCTecchs in California for repairs. Then fixed my UNI which had the mini usb completely fallen off.
Maybe it was on ebay because the seller knew the usb port was damaged?
were you able to charge your device via cable but still not active sync???????????
do you have any third-party plugins installed in ActiveSync?
I found that my ActiveSync problems were cleared up by uninstalling SplashID's ActiveSync conduit. ActiveSync seems quite fragile to buggy plugins
Try Uninstalling and then re-installing Active Sync, this solved the problem on mine a while ago...TJ
forj1 said:
I got a x7500 from ebay and the device works great except unable to activesync via usb or bluetooth so I cannot install certain applications and sync up with outlook. Also none of my three computers do not see the device when connect to usb it only charges the device. I can however ftp and send obx files via bluetooth. I aslo tried resco explorer and set up some shared folders but unabe to see them via network. I also have tried the usb to pc checked and unchecked and the usbsettings.exe via turbo, normal and media and no luck whatsoever. I have even hard reset the device and tried everything again and nothings different same effect. Any Ideas. I tried four different cables, three pc's, 4.5, 4.2 and 4.1 activesync. tried bluetooth,. really fustrating.
PC's are Windows XP
Advantage is WM6
Rom is AP Touch 3.0
James
Click to expand...
Click to collapse
My Ameo Developed this problem out of nowhere! it started by needing a reset to connect to Activesync and now it just stopped working altogether. After trying everything suggested in here, i unchecked the "enable advanced network functionality" box, removed password lock from the device, did a SOFT reset and now its back! i am able to sync!

Big Problems :((

I have the following problem with my HTC Touch HD. Since yesterday after i transfered 2 video files and a few pictures, when i connect it through USB, the computer doesn''t detect HTC anymore (nor syncing nor file transfer). Even the Bluetooth syncing does not work. I performed several soft and hard resets, and it seems it;s getting worse after every reset.
I bought the phone 2 weeks ago, after i sold my Apple iPhone 3G 8GB. As we speak, i kind of regret i did that...any advise for me ?
I forgot to mention: when i plug the uSB cable, the device goes recharging.
Have you tried booting your pc ?
Also try unchecking Settings/connections/Usb to Pc/ "enable faster data synchronization"
r
Andrew
What cable do you use? I had similar problems with non original (asus) usb cable.
greetings everybody..
1) i tried what you said several times, no result.
2) i get same results with the original and the other cables..
3) i noticed one thing . . . if i connect the device to a computer that i never conected before the device, it launches active sync....and Active Sync just wont interact with my device.
Did you try reinstalling ActiveSync on your PC?
yes i tried....same result. Do you think a change of ROM would solve that ?
Now, even a syncronisation using bluetooth is almost impossible, since i cant pair the computer and the device. Damn, it's like a virus or something.
stupid thought:
Do you think a change of ROM would solve that ?
Click to expand...
Click to collapse
Impossible since i cannot connect using USB. Sorry !
I too had problems with my PC not recognizing the HD. Found out that it was a problem with my firewall and anti-virus. I adjusted anti-virus settings to allow active sync to pass through and have had no problems after that.
HTC also recommends going to Start --> Settings --> Connection tab --> USB to PC and deselect the checkbox for "Enable faster data sync"
For device recharging when plugged in to USB : go to Start --> Settings --> System tab --> Power. here below the battery charge indicator, there is a checkbox. Read the message and check/uncheck as desired.
Hope this helps !!
i thought one potential source for my problem would be the antivirus, but i disabled firewall (eset at work and symantec end point protection at home) and no result what so ever.
I cand figure a way to sync the device even with the bluetooth since i cannot pair the device and the computer.
I am starting to regret i bought HTC...
Try click the Activesync icon on HD Program, there is a "Option" on the menu, click and see if you could delete all the old connect. If yes, re-establish the connection again to see.....good luck
Option menu item is disabled (i performed several hard resets)...(
Another thing i noticed. I unchecked the box (when connected to USB charge), so now when i plug the usb cable, it wont charge. But, if the device is in stand by (black screen), and i plug the usb cable, it wakes the device up. So, in my mind, i think it is something wrong with the OS, it still "feels" the USB cable, but cannot (for an unknown reason) take the necesary action.
For 4 hrs i try to sync the device with the computer using bluetooth, and i cannot manage to do so.
Is there any way to reinstall ActiveSync on my HTC device ?
daemonus said:
Option menu item is disabled. For 4 hrs i try to sync the device with the computer using bluetooth, and i cannot manage to do so. Is there any way to reinstall ActiveSync on my HTC device ?
Click to expand...
Click to collapse
My sync problem with HD and my PC with Vista, was solved as follows:
- Uninstall Windows Mobile Device Center
- Reboot and reinstall WMDC
Ton V
NLBeev said:
My sync problem with HD and my PC with Vista, was solved as follows:
- Uninstall Windows Mobile Device Center
- Reboot and reinstall WMDC
Ton V
Click to expand...
Click to collapse
Tonight i will try to install at home Windows VIsta (at work and at home right now i have XP). I cannot use my phone - no phone number in agenda and it's driving me mad. The phone rings and there are quite a few persons i dont want to talk with.. HEEEEEELP
nobody there to help me ?
If you did a hard reset, and you can connect in drive mode, but can not sync, then I am 99.9% sure that there is nothing wrong with your phone, but that your computer is messed up.
Uninstall all your antiviruses, firewalls, and other bloatware, and see if it works then.
Just a possible solution, but did you try plugging in your phone into other USB slots on your PC? Are you perhaps trying to sync it through an USB extension cord, or maybe USB hub? I had problems with my PC recognizing the THD if I tried syncing that way. Best results were plugging it directly into the back side of the casing.
The reason I'm asking this is that if you have too many USB devices plugged in, it's possible that the USB voltage drops too low and devices won't connect to the computer.
I tried on 5 different computers, all available USB ports.
On a new computer, sometimes on the device screen it shows up Active Sync but that is all, no sync occurs. If i try again on that computer, i get the same result as i get using the computer at home or work.
The device cannot conect as a Disk Drive
Is there a way to reinstall Active Sync on HTC ? My guess is that this software is all gone with the wind (even i performed a hard reset). The big question is what the hell happened ? Could be a ROM fault ? I mention i never tried to change ROM, the only software i installed was S2U2 and Core Player.
If by monday it wont work, then i'll send it into service (i have warranty). But i hate service
all out of ideas...
Any ideas ?
Which items are checked when you go to Settings/connections/Usb to Pc/ on youre phone?
Have you tried to use another memory card (because youre problems started with copying)?

Categories

Resources