Hello All,
I have a Wizard and it has a problem. If i close the keyboard too quick, or press on the screen or outter case too hard, the entire thing will freeze. Sometimes it will fade to a white screen and reboot, other times I have to soft reset it. I thought it might be the battery, so I replaced it with no go. I also updated the rom to 3.08 ipl/spl, with a gsm radio of 2.25 and WM6 (jaguar) and it still does it. Therefore, I believe it to be hardware related. Are there any tips/tricks I can do to fix this, or is it a lost cause? I really enjoy the phone and will be upgraded to the tilt in a few months but would like to play with this phone as is right now (as it was free). Any and all help is appreciated.
Thanks guys
im not sure about ur but my phone had a problem kinda like that. i was using it ( namely the flash of the camera) as a flashlite to see a leak and some water got into it( a few drops max ) anyway after that it would turn on properly but after a little while it would just turn white and hang if i took the battery out and then after a min or 2 put it back in it would be ok for another few minutes
so i girded up my loins and downloaded the service manual and opened the phone used a blow drier to dry everything out inside it after taking it apart peice by peice put it back together again ad viola its working perfectly
nyway so maybe some cables loose or something give it a try u got nothing to lose as u said the phone came to u free anyway
Are you guys by any chance overclocking?
overclocking to 247 with variable speeds to conserve battery.
Using Battery Status 1.40 Beta nightly build(with clock) The scalable cpu feature is F'n AWESOME! and the taskbar icons make sure I never open commmanager.
I don't know if it is safe to overclock it anymore than 247... is it??? I'm afaraid to try because I need my phone
wassup, I am not overclocking
docnas, I will try and tear it apart to see if there is a loose connection. I had been thinking along those lines, and will definitely try that out.
Any other suggestions as well?
Well i overclock mine to 260 whenever I use wifi and other programs but lower it back to 195 if I'm doing light taks such as a phone call. With that, everyone in a while when i take it to 260 it will freeze, then fade to a white screen, and restart. Other than that i don't know what other problems that could've cause this.
@ cptcrunch only suggestion is take it slow and easy dont get over eager and snap something ( i did and broke the ear speaker peice luckly one of this great forums members is going to supply me one he had lying around)
Oh and one more thing dont open the LCD screen portion just open it to the main circuit board and check out the 2 connectors ( the large one on the bottom side and a small reddish one on top the large one is the actual LCD screen connector so it might be the culprit
About overclocking im a normal user and have batterystatus installed using cpuscalar feature i have it at 110 195 234 boost 273
never had a problem with these settings but ur miles may vary
I also have a similar problem except mine freezes when I put it in standby mode and then randomly push the buttons under the lcd display (like they would get pushed being in your pocket.) I have no clue why but it takes a hard reset to get it working agian. Im probably going to get rid of it.
Related
Please help! I was sending a email, finished then closed my keyboard, and my screen went blank, then came back on with thousands of very small horizontal grey lines.
I have tried a soft reset and hard reset to no avail! Help!
Sounds like that may be a hardware fault, is the device still under waranty? If not you could try a rom upgrade but i would'nt guarantee anything would be fixed.
I have switched from 2.17 to 2.20 back to 1.18 (default incase its dead) and have been waiting on hold now for 45 minutes or so with tmobile.
Get them to fix it, sounds like a graphics hardware prob. All the best.
OMG..... what the hell is wrong with these phones?!??!
I swear. I had a ipaq h6315 before this.... went thru THREE of them.
One had a video hardware problem (card fried), one had the internal reciver die and the last one they said the trasnformer or whatever inside burnt frying everything.
So they replace THAT one with a MDA (my request) and I LOVE the phone. Smaller, faster... not as long battery, but decent.
Now, this one is already zapping about. It works rock solid for like 3 months, then suddenly after making an email BLAM, the screen goes to all grey lines.
Weirdest thing about all these is I treat my phones like fing GOLD. No dropping, no scratches ANYWHERE, hell, even the paint is all perfect. I get expensive very nice working screen protectors for them... I even sing them to sleep at night after thier choice cut electric steak... WHAT THE HELL?!?!?!
*cries*
Hello xda community ive got a strange problem that i wish you could help me with, sometimes my HTC Wizard 2.x IPL freezes and the screen goes white with like a 'fading effect' for no reason, its most probably hardware problem right?
same white screen of death here.
I am having the same problem. I have not been able to isolate if it is Flash memory problem, battery or some other hardware problem.
I was having some major problem with my early 2006 version of T-mobile MDA. I had upgraded to the official T-mobile upgrade ROM when it was released a couple of years ago.
The phone started flaking out this spring. at one point I had to buy a new battery and charger because I had discharged the internal battery too far. I've also "jump-started" the battery using a bench power supply to apply a constant current to get it up to speed when I had a dead battery at work.
And, when I busted the USB/power connector, one of the re-work techs soldered it back on after I dissambled the unit.
Anyway, I had been having lock-up problems before the latest dead battery issues, and had wanted to try a new ROM. When the unit did a hard reset of its own, I decided I had nothing to lose. It had been resetting itself several times a day.
I installed Slim Diamond, and enjoyed WM6 greatly. Phone worked more or less fine for more than a month, and then it started failing again. I found myself having to remove the battery to recover, and sometimes keeping the battery out for hours seemed to help. It got so bad it wouldn't even boot to a usable phone before giving me the White Screen of Death.
I managed to get it back to bootloader and re-install diamond. Worked fine getting booted, and I made some calls. then locking up in WSOD again. Blasted a Prodigy ROM onto it. Booted and let it sit connected by USB. Everything seemed fine, downloaded e-mail etc. Then, unplugged and left the house. When I tried to call, everything went fine until the point where the call should have stopped ringing and connected. Then, WSOD.
Is there a non-hardware fix for this, some ROM or tweak?
If it is a hardware fix, what is the likely culprit? I can do SMD work if needed.
Thanks
Whazoo
P.S. I should mention that when the WSOD would strike, the phone locks up completely, and if left like that, the battery gets warm.
excactly what happens to me..btw for some reason i think its battery problem, because i got it off ebay and ive seen other similar problems with bad batteries for some reason..hope someone can help us
phr0z said:
excactly what happens to me..btw for some reason i think its battery problem, because i got it off ebay and ive seen other similar problems with bad batteries for some reason..hope someone can help us
Click to expand...
Click to collapse
I was thinking that. I had noticed that it failed most often when trying to make a call, something that is power intensive.
I tried something today. I left the SIM out and just used it as a PDA. It seemed to work longer between reboots. However, it still rebooted while connected to a USB power source. Also, it seemed to not want to charge at times.
Even more interesting is this thread which may be related.
http://forum.xda-developers.com/showthread.php?t=444256
The excessive battery usage seems to fit with what I am getting. I wonder if something has been triggered which causes the system to drain th battery quickly, and lead to low-voltage conditions.
I am having the same problem, sometimes the screen is filled with vertical lines and then fades to white. Only thing that helps is sliding out the keyboard. I think this is due to the faulty flex cable that connects the motherboard and the screen. I have ran some tests when my device was disasembled (but powered on). The screen was working fine, even when i was bending and streching the flex cable, but after asembling it back again, screen glithes continued. I've then reinforced the flex cable connector on the mobo with some rubber pads and electrical tape, and this seems to be almost working (screen jerks only happen 2-4 times a week)As Whazoo pointed out, those screen jerks used to appear more often during power intensive tasks, like receiving a call. Probably this is due to the loose cable connection. Less power than needed is flowing through the circuits and this causes the sreen to "crash".
BTW I have T-Mobile MDA
I have the same issue with my xda mini s and have been contemplating disassembling my phone for a closer look.
It is difficult to take these phones apart ?
Cheers
TT
I've had the same issues. I suspect faulty hardware. Do you guys experience "dancing" pixels short before a WSOD? Those dancing pixels can be overcome when applying sufficient pressure to the bottom of the phone. I personally suspect a worn flatcable between motherboard en LCD unit which fails to make a solid connection between both. I have to mention that I too have jump started a "dead" battery once. WSOD problems started occurring several moths after. I doubt it is linked.
Currently, the phone is stuck in bootloader, being unable to flash a new ROM on to it since it keeps on rebooting itself every few seconds to minutes. I guess it is a total loss. The phone lasted only a few months when the stylus started to drop out and it took only 16 months before the dreaded WSOD started. At first only a couple of times a week while increasing after a few weeks. I recon a motherboard transplant could fix the problem.
Hi,
got the same problem. And i have also "dancing" pixels, the screen seems to "flicker"
oh dear!
I'l have to see if this is a simple flex cable issue. Of course I had just convinced the wife the MDA I have was a hopeless case. I replaced it this week with an 8925 off eBay that I unlocked and flashed to the HTC WWE for Kaiser. BTW, the Kaiser/8925 is a nice upgrade. So, I'll take apart the old phone and see if I can get it working. If so, I'll keep it for a backup.
One question I have is why does it seem to be related to radio usage and battery drain/short life.
mine begun after changed 2.21.0olip
flashing bluring and reboting.
i´m trying find a original rom to see if fix it...
after i upgrade to wm6 the old one (wm5) that was corrupted and missing files its draining the battery in few minutes.......
----------------------------------------- xx ------------------------------- xx --------------------------------------
7 days trying fix it....
My friend was think a batery problem... He buyed a new one and used the original rom on that. The defect not desapear. The screen still blur, flashing, and the batery begin to warm up to fast, one day the batery was near blow... the batery was too fat, like a pig near christmas!
He give me the Wiza200, I find a used batery, thats work for 4 days and begin to warm up, the celular was draining to fast, and the batery warm up to fasssssst tooo. after 2 days its just no signal...
Take of batery, wait 50 minutes on charging. Turning on, reboot, reboot, reboot, reset, then it begin to be normal, after 5 minutes, no signal, and flashing and bluring the screen and itelf reboot and lock on boot screen... Anoyed i used a ATX pc power suply direct on + and - contacts, soldered some capacitors on main board and same problem. Its draining near 500ma... with sim card its work fine. i can use the games for near 20 minutes, no blur screen just reseting. I take voltages near the processor and radio and sim card suply its almost stable... variation of 10mVolts - 50mVolt... I changed the capacitors for new ones... The mobile begin to be more estable, but bluring and rebooting when put the sim card, reseting near 4 - 5 times on windows... and be estable again... but no signal.
I made a full rom backup, radio etc... tryed to change ROM... nothing change, then I tryied change radio... used the hardcpl.... sucefull changed the radio and the the ipl and cpl.... puff its just reseting and reseting again... Just dont reseting when on it was on bot block screen. I lose time searching a original ROM... My friend send me last rom used... all software back to original and the problem.... Damn...
This device was used near a beach for 2 years...
Unescrewed, again open the case... lift the shields.... clean... clean and clean... this device stoped to reboot, but no signal... wi fi useful, windows ok... used it for 2 days with no problem... when its locked up, and i reset it... Damn dont turn on, just on boot screen, and blur and flash screen and reboot itself near 3 seconds...
I lose my mind. I dissasembled all, put all things on water and a little of a soap, washed all device... for 30 minutes.
warm up all device for 40 celcius for 40 minutes and reasembled... Nothing... warm up with 40 celcius for more 30 minutes...
Wow. its turn on again......!!!! And COOOOOOOOOOOOOOOOOOOOOOOOOlllll no more drain the batery!!!!!! Excelent signal and im using the fone! 40 minutes and its normal... y go to street, receive some calls and its alive!!!!
Resume: 90% of hardare celular problems is sweat of hands, just need clean.
I hope help someone with it
Same prob a year ago.
I had the same problem a year ago. Sorry to say I never found a solution. I ended up buying another used one from eBay. ROMs won't help I flash my phones a lot looking for the perfect combination. I think you are on the right track with the connector between the display and MB. I think it has to do with condensation and heat. Explains why heavier powered use causes the problem. The more battery drain, the more internal heat. When I finally gave up on mine, It wouldn't boot anymore. Actually it does boot and everything is working. I've even received calls with the screen white. I picked it up a couple months ago, tinkering with it. I put a fresh battery in and it booted up and lasted about 10 min. I was excited for a while thinking time had fixed it. Bummer. Good luck. I hope you find your solution.
i've been experiencing vertical lines & flicker with my tmobile mda especially within the submenus. found out that by lowering the overclock (omapclock) to a value near its default clock speed, the problems disappear. i'm guessing it might be related to overclocking my gadget.
Hello everyone! I have problem with my phone because sometimes is turning off without any reason, I bought brand new battery and is still same when is switched off and I want to put it back on i must take off battery for couple of minutes, then put battery back and then switch on anybody know whats happened?? And how to fix it!!
It's the most standard problem with htc models touch and elf...
This problem is hardware based! in this condition there are only 2 things you can do:
1.send the device to a htc service center and get the motherboard changed for $300+ if you are out of warranty.
2.Or open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it and then put the second cover on top in order to apply pressure to it because the solder pins that are in between the cpu and the mobo are not connecting properly and lose contact so the phone goes off or freezes then goes off and some times stays off. Make sure that there is enough but not to much pressure applied to it! it worked for mine but i did it because it was out of warranty... its a temporary fix but if you are gentile to it after it will surely work for a few more months...
IF YOU HAVE NEVER DONE SOMETHING LIKE THIS BEFORE OR YOUR TOUCH/ELF IS STILL IN WARRANTY DO NOT TRY IT!
I will post a pic that i took when i did mine if anyone is interested... Let me know...
Thanks for reply!
Uff.... first way to fix it is a little bit too expensive! And 2 way to do it seems quite easy, so i try to do it this way Could you add any picture of this and just tell me how to open this phone?
Many thanks!
@Firestarter42
Thanks man!!!!
did what you said, the plastic trik, and the phone is back to life (it was totally dead and didn't charge) you save a life today!!!
I had the same problem untill one day when he didn`t want to turn on and now i do not know what to do with it how to make it work again
Dear Sir,
I have just tried method 2.
My elf didnt have a metal cover on the processor, lol... got it used from someone... or should I say abused? lol
anyway, I hope it works. will update...
here's a link for the demonstrated tutorial:
http://forum.xda-developers.com/showthread.php?t=476152
Thanks a lot again.
I haved the same problem.....and i realize after many times that I didn't change my ipl and uspl!!!so my cocked rom frequentely turn off my device!!!now it's all right!!!!!!!
i had the same problm too....
it kept turning off and just a few weeks ago it would never turn on...
i did try that trick of keeping the plastic thingy on the omap processor ... it worked for a few weeks max after tht it happened as above
finally took my phone to htc.. told them it was gift and i dont have the invoice... actually purchased frm ebay for 150$ .....
they checked it was in warranty,.. they replaced the board... hurray... my elfin is alive again.. and in wm6.1
hope htc fixes this crap issue as many face this problem
My HTC elf was freezing, rbooting and so on, i was thinking that it was a windows/flash/third party programs problems ....
BUT I confirm that the method "open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it"
brings my htc elf to life again ... stable !
(i've done it with a metal piece and not plastic.)
Thanks for the advice !!!!
my elf was freezing and turning off so i try this 2. method and it works, and elf is much faster then before in my case...
I've never had this problem before but this week my phone switched itself off (so had to boot up again) a couple of times. I did try a new custom rom but I've also been using a different charger (USB mains adaptor) and a replacement battery (this seems to be a poor replacement battery which seems to make up the battery level.
So I don't know what was causing it. For some reason, removing the SD card and re-inserting it seems to have done the trick for now but I'll keep watching it.
Hi guys
My phone is, usually at night when there is no use, switching the screen off, the earphone green indicator flashes but the phone will not turn on when I press the power button, I have to do a soft reset each time to get it back on again (even though it appears to be on with the flashing green light). I cannot get calls or text and my alarm fails to sound. Have overslept a few times now!. Also, its battery has gone for a ball of ^&*%. Will this trick help? Thanks a lot!
Turn off as in literally 'poof!' or, it will restart?
The only way to get it to restart is to do a soft reset, or remove and replace the battery. The phone's green light will flash but there is no way to the screen to activate or use the phone - make calls, use the alarm, receive etc. The screen stays black, no use trying the power button either...
Firestarter42 said:
It's the most standard problem with htc models touch and elf...
This problem is hardware based! in this condition there are only 2 things you can do:
1.send the device to a htc service center and get the motherboard changed for $300+ if you are out of warranty.
2.Or open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it and then put the second cover on top in order to apply pressure to it because the solder pins that are in between the cpu and the mobo are not connecting properly and lose contact so the phone goes off or freezes then goes off and some times stays off. Make sure that there is enough but not to much pressure applied to it! it worked for mine but i did it because it was out of warranty... its a temporary fix but if you are gentile to it after it will surely work for a few more months...
IF YOU HAVE NEVER DONE SOMETHING LIKE THIS BEFORE OR YOUR TOUCH/ELF IS STILL IN WARRANTY DO NOT TRY IT!
I will post a pic that i took when i did mine if anyone is interested... Let me know...
Click to expand...
Click to collapse
Thankx your solutions worked out with my HTC Touch and i get replaced omap processor
power problem on Elf (not the usual)
hello guys, i have an Elf T-mobile that someone "lost" i found it, but was bricked...i unbricked following the awesome guides on the forum and installed on it the original italian rom (obviously am not german)
but...here's the problem, when i press the power button (should get it into stand by mode like every pda does) or also when goes on stand by itself, just shuts down !!!
then the pda auto soft resets, until the end...doesn't have the "auto power off problem" like i readed on the forums...however it tried but didn't solve the problem
i think is a problem with the radio, or the IPL or SPL (i tried 1.11.0002 IPL and 1.11.000 SPL...then 2.2x.xxxx IPL and SPL...now i tried 3.14.0002 IPL and 3.14.0000 SPL, also tried different radios...
but the problem remains...
EDIT: Problem solved, changed the little battery in the motherborad, it worked for me
help
Firestarter42 said:
It's the most standard problem with htc models touch and elf...
This problem is hardware based! in this condition there are only 2 things you can do:
1.send the device to a htc service center and get the motherboard changed for $300+ if you are out of warranty.
2.Or open the mobile and put a piece of thin plastic in between the omap prosessor chip and the steel piece tha goes over it and then put the second cover on top in order to apply pressure to it because the solder pins that are in between the cpu and the mobo are not connecting properly and lose contact so the phone goes off or freezes then goes off and some times stays off. Make sure that there is enough but not to much pressure applied to it! it worked for mine but i did it because it was out of warranty... its a temporary fix but if you are gentile to it after it will surely work for a few more months...
IF YOU HAVE NEVER DONE SOMETHING LIKE THIS BEFORE OR YOUR TOUCH/ELF IS STILL IN WARRANTY DO NOT TRY IT!
I will post a pic that i took when i did mine if anyone is interested... Let me know...
Click to expand...
Click to collapse
can any one provide some sought of tutorial for this please
thanks
ishaan_chd88 said:
can any one provide some sought of tutorial for this please
thanks
Click to expand...
Click to collapse
I'm presuming you mean for option 2, as 1 is quite obvious
Anyways, I haven't done this, but I am posting my best guess (untried, untested, just a theory).
Open your phone up and completely dissamble as described here. Completely strip it down so you only have your mainboard. Clearly take all the necessary precautions before hand (backup, etc etc.)
When done, you will see there are blank shields above where the chips will be, if you look, you can see little dimples, you can ease these off here. This will get you into where the omap processor is. You can then put the plastic on top, and make sure it is done as described. Should literally be a case of putting it all together and hoping for the best after that. I will have a look at some point (can't promise when) and see if I can take some photos of where this will go etc.
An alternative would be to try and reflow the joints of solder with a heat gun... very dangerous considering how tight the components are packed in, and overkill.
captainstu72 said:
I'm presuming you mean for option 2, as 1 is quite obvious
Anyways, I haven't done this, but I am posting my best guess (untried, untested, just a theory).
Open your phone up and completely dissamble as described here. Completely strip it down so you only have your mainboard. Clearly take all the necessary precautions before hand (backup, etc etc.)
When done, you will see there are blank shields above where the chips will be, if you look, you can see little dimples, you can ease these off here. This will get you into where the omap processor is. You can then put the plastic on top, and make sure it is done as described. Should literally be a case of putting it all together and hoping for the best after that. I will have a look at some point (can't promise when) and see if I can take some photos of where this will go etc.
An alternative would be to try and reflow the joints of solder with a heat gun... very dangerous considering how tight the components are packed in, and overkill.
Click to expand...
Click to collapse
thanks man but i guess am so dumb that am not getting where is this processor located anyways currently my phone is working fine but in few days I'll get the tools & open it...let see than
if you can arrange any pic of processor(where we have to fit plastic) it will be extremely helpful...
anyways thanks for helping
tc
where to get small battery on mother board
Do I blame the onboard video or the LCD itself for this problem? I've taken the phone apart and re-seated the motherboard connections, which was no help. If I connect using EveryWAN the phone appears to be working fine, in fact I flashed the T-Mobile ROM and than the Button ROM thinking it was a IPL/SPL issue. Even if I try to start in boot loader mode the screen still looks the same.
Just trying to decide If I need to replace the motherboard or the LCD.
Thanks,
Bump back to the top!
Screen seems intact without any damage visible, no cracks or out?
Had this problem once with my old Universal, was the colour transfer wires that were loose, but pretty sure the Uni is totally different to our wizards.
Prehaps open her up and see if theres anything thats loose prehaps.
I had it opened and re-seated both the connecting cables, but no luck.
Ive had this problem with my wizard .. i couldnt find a solution. tho i didnt really try very hard. Basicaly just picked up another one on ebay for like £30 seemed cheaper than spending the time and effort fixing it. I think mine got progressivly worse. It used to do it occasionaly and now just it as soon as its switched on
i have a same sort of problem...
left of the screen fills with lines and the whole screen fades to white.
turning on and of the screen via power button takes it back to normal but then it happens again.
noticed it only happen in portrait so i have to set it to landscape all the time
for some rom and spl's it happens just a few times a day and others i cant use it in portrait.
If i find a solution it might be working for you to
Fading white screen of death
Could be the battery. Have you tried a new battery?
Solved.
The LCD itself was bad.
Hello!I got a HTC elf for about 2 months and i got some problems with him for about some time it freezes from sudent without doing anything and sometimes the power goes off and doesn`t want to turn on anymore,i do not know what to do with him now.Please help me
PS: The phone is bought second-hand in case it helps but this happens only for about 2 weeks
man HTC touch elf phones are quiet delicate also (from its back side).
i believe you might have fallen it somewhere hence its back side of the phone has become loose so hence it would loosen up the battery...every tym you pressure at its back side I to had a similar enigma, i just tighten the back part and later it worked properly..
Anyone can give me some more details about this kind of problem and solution to this please maybe a tutorial with pictures?
did u drop your phone?? i used to drop my phone alot aswel and so had the problems of turning off time snd again too! probably th battery has loosen abit..try keepin a thin paper/cover over th batt/under the batt cover to make it fit tight! about the freezing problems i didnt have any..might b bcoz ur phone is old(2nd hand) - or having inner circuit problems maybe!
It felt for about 2 times but was with the housing on it and i do not think it had suffered anything but i will try tomorrow to put something on the back cover of the battery to see if it has any results.And about the problem with freezeing i disasambled the mainboard and made it with contact spray so i don`t think it does that because it isn`t make a good contact something or things like this,and the problem is that it does power on very hard after the freezing and sometimes it just goes off from sudent and do not want to power on any more.The phone is SH but when i bought it it didn`t had any of this problems
Hello again!I have tried your ideea with putting something betwean the battery and the back cover but it steel freezes do not know what to do with it anymore!please help me solve this problem!!!(
probably the plastic piece will solve ur problems.
http://forum.xda-developers.com/showthread.php?t=477120
I allready tried this and for a moment i thought the problem was solved but after abot 3h the device was power off but after yesterday (cuz sunday i disasambled the device) i didn`t happened anymore but today the device was low battery and i do not know why cuz yesterday morning i took him from the charge..very bizzar isn`t it?:-?
Mine started to have the same problem, I have it for two years and no problems until now. I cared about it very well, so no fall-downs or scratches. I updated everything in SW I could but it doesnt solve the problem. I also replaced the battery, no effect. I think it will be electronic issue. Wish someone could help us...
Hi,
I think I had the same problem:
- the phone froze in standby (sometimes after 30min, sometimes after more than 5 hours).
- if standby is disabled it NEVER froze (but i had to charge battery one a day).
flashing was no solution (tried blue elves, onyx and tess).
i shipped it to htc-repair-center three times, but they could not repair my device (altough they tried and shipped it back to me DEFECTIVE).
Now I have a replacement Elfin which works perfectly.
So nobody has a solution for this?
Has anyone found a solution for this cuz i tried the plastic thing but nothing seems to solve the problem i disasambled the elf and put contacts spray wd40 on it and heated but nothing the phone still goes off and freezes i still use the plastic things over the processor but i think that it does this because the processor is overheated and thats why it freez and turn off and do not whant to turn on maybe someone had tested to put a piece of aluminium in stead of the plastic thing to cool the processor?
I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2 where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.