Database Users

How to restore the orginal S200 ROM ?

Hi people,
I have a mayor problem. I just fu*ked up my phone by installing WM6.
Now the screen freezes when the QTEK "Keep the world in one" logo is visible with the OS Version information. Hard reset wont work.
How can I restore the original rom ?
Please help me!

s200 off
and I have this problem. my phone is off by installing new spl
Now the screen freezes when the QTEK "Keep the world in one" logo is visible with the OS Version information. Hard reset wont work.
How can I restore the original rom ?
Please help me

To go in the boot loader screen you have to:
press & hold camera and commmanager button
press the softreset hole
release the commmanager button and keep hold the camera button until the 3 colours display appear
Byez

but wat can i do after i hav the 3 colour screen come out?
pls help..... i'm very nervous..... i don wanna waste my money coz i screw up my phone.,...
i'm now outstation... can go back to the service center within this 6 mth....

Connect USB Cable. Go in the Boot Loader screen (Hold down camera button, power button and soft reset until the 3 colours display appear). Run Rom upgrade Software.

mrsurya2000 said:
Connect USB Cable. Go in the Boot Loader screen (Hold down camera button, power button and soft reset until the 3 colours display appear). Run Rom upgrade Software.
Click to expand...
Click to collapse
Which rom upgrade software ?

de.schurk said:
Which rom upgrade software ?
Click to expand...
Click to collapse
http://www.romupdate.ru/ghjibdrblkz...rophet_220734_2207114_024721_QtekWWE_Ship.exe --> this software
don't worry, your device isn't bricked as long as you can run it in bootloader
check in WIKI if you have G3 or G4 Prophet

I'm the exact same situation.
And wiki didn't help so far...

Take it easy and flash the ROM as described. Use any WM5 ROM compatible with your device, but preferrably one with no vendor ID. In case you cannot update normally use the RUU-No-Vendor-ID application found in the FTP.
As said above the device is not dead, it can be recovered.

namco said:
Take it easy and flash the ROM as described. Use any WM5 ROM compatible with your device, but preferrably one with no vendor ID. In case you cannot update normally use the RUU-No-Vendor-ID application found in the FTP.
As said above the device is not dead, it can be recovered.
Click to expand...
Click to collapse
Bear with me on the dumb questions
It looks like I managed to re-install
Thank you for your help. I installed the rom dezzer advised (post 7 of this thread) and it worked fine. Does that mean tha NOW i can flash smart1 1.3's?

Yep. Turn off the phone, make it sync with activesync and run UPDATE_ROM.bat.
Then cross your fingers Kidding. It will surely work. Remember to hard-reset after the upgrade.
If anything goes wrong just reflash WM5 and hard-reset. Always hard-reset after ANY OS upgrade.

By mistake uploaded WM 6 into 1.1 SPL

Hi I uploaded WM6 on my device.
Now I need original rom because I think my device is CID locked.
I am looking for Charmer TMO AT rom please.
or solution because I am stucked in boot screen.
Thanks

You can try this ROM : http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html if not try http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip

At 95% it says invalid rom.
jas_pik said:
You can try this ROM : http://rapidshare.com/files/41754719/RUU_Prophet_220734_2207114_024721_QtekWWE_Ship.exe.html if not try http://www.windowsceportal.hu/tartalom/programok/htc_charmer_upgradeut_noid.zip
Click to expand...
Click to collapse

Did you try to do Hard Reset manually ?
Hold down the 2 left side buttons, camera + voice, then poke the reset, while still holding the 2 buttons wait for display to prompt for reset.

I have the same problem and I tried restart but is does't work...my charmer also did't connect to pc
i have a windows vista...

bricked xperia-how to unbrick.

this is not a question,but sollution
i installed hard spl on x1,and the try to update with generic rom,and i stucked on 10%.when recovery was finish,nothing changed.10%again.i try with another rom,and it's installed to 100%,but x1 then keep on restarting.it's not even reach the main window,but stucked in 'sony ericsson'.if you have this issue,read tips below.
1. make x1 in bootloader mode (hold down volume down+power button)
2. hard reset your device
3. voila
xperia won't hard reset,if he won't be in bootloader mode first!!!and you need to instal at least one room to 100%.

rakec00 said:
this is not a question,but sollution
i installed hard spl on x1,and the try to update with generic rom,and i stucked on 10%.when recovery was finish,nothing changed.10%again.i try with another rom,and it's installed to 100%,but x1 then keep on restarting.it's not even reach the main window,but stucked in 'sony ericsson'.if you have this issue,read tips below.
1. make x1 in bootloader mode (hold down volume down+power button)
2. hard reset your device
3. voila
xperia won't hard reset,if he won't be in bootloader mode first!!!and you need to instal at least one room to 100%.
Click to expand...
Click to collapse
hi,
am having problem here. doing something wrong while flash rom & my x1 bricked. now bootloader shows no image. when turn on it stuck at sony logo.
how do i overcome this? please help.

me too..
just want to install the Energy Leo (this is my first time, n i've done the HARD-SPL before install the ROM)
did u mean that i should enter the bootloader mode n do the hard reset while in bootloader mode?
Thankyou very much!
sorry if my english is bad..
3rd party world..

fully bricked
Hi
After last power off Xperia X1 dont wake up at all
- no bootloader
- no hard reset
- no power up
- no any single spark of life
Is there some trick or JTAG to wake up the phone.
Thanks in advance.

charge the phone completely, enter bootloader using the camera button+power button, task29, then flash via RUU

task29 saved me after bricking my phone few days ago when my device disconnected during a rom installation... something i tried and hoped it worked then it did... RUU wont even install unless i task29 that heartbreaking moment

What is task29

Suhel28 said:
What is task29
Click to expand...
Click to collapse
its the miracle task

inheaven said:
its the miracle task
Click to expand...
Click to collapse
very funny can you please elaborate..

I would also like to know of this task of 29.
I'm screwing around allot on my phone and an accidental brick'ing would like to be un'bricked.

no one want reply me :=(

with big mistake i was flashing my ELF with a wrong rom( svp s650)..
it unbootable I tried everytings hard reset soft reset nothing changes: = (just the green light that stays on ..
help plz and thanks
Reply With Quote

muslim2009 said:
with big mistake i was flashing my ELF with a wrong rom( svp s650)..
it unbootable I tried everytings hard reset soft reset nothing changes: = (just the green light that stays on ..
help plz and thanks
Reply With Quote
Click to expand...
Click to collapse
Hi
Sorry to hear your problem, try to read this guide http://forum.xda-developers.com/showthread.php?t=406721 and the stickies in the Elf Upgrading
Hope you can save your device

i have read it but i dont find the sollution :=(
can you help me plz ????

muslim2009 said:
i have read it but i dont find the sollution :=(
can you help me plz ????
Click to expand...
Click to collapse
Hi
Does it go into bootloader (3 colors )?

no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(

nothing again
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(..
if you can give a vedio explean how i can result this problem..
and big thanks from morrocco

muslim2009 said:
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(..
if you can give a vedio explean how i can result this problem..
and big thanks from morrocco
Click to expand...
Click to collapse
Hi muslim2009
I tried a few searches but all the results say you need the bootloader screen , are you sure you didn't miss a step in hard reset or bootloader mode :
To enter the bootloader:
Hold down the camera button and reset device with the stylus. Keep holding the camera button until you see 'tricolor' bootloader screen.
An alternative way to enter bootloader:
Switch the device off by long pressing O/I (power) button. hold down the camera button while pressing the O/I button about 1 second. Keep holding the camera button until you see 'tricolor' bootloader screen.
Alternative(universal?) bootloader(3)
As almost all htc smartphones with onboard camera, when you push and hold the camera(photo) button, and plug in usb adapter. Even a "stupid" usb power adapter will work.
To hard reset:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
I sincerely hope it helps
I was also born in Morrocco at Casablanca and lived there until age 16. Anyway I'll continue searching.
Tito

thanks for help,but it won't work :=(..
[email protected]
add me if i can show you my htc ..
thanks from morocco

I'm not sure if it's possible with the HTC Touch, but I know when I was playing around with an old iMate SP3i (smartphone) I was able to do a ROM upgrade from files on the memory card.. Took me a few attempts to get it right, but it worked. I think I also upgrade my SP5 to WM6 from WM5 that way, but I'm not too sure about that.
Either way, a basic idea of what I'm talking about can be found here, but that is obviously for a different phone.. Maybe some of the more common members here would have better luck finding a similar process on a Touch....?

maybe its will be workin but what marterial i will need for this opperation??

On some HTC devices (cheetah, for example) if you put the ROM file (.bin) in the root directory of the SD card, the phone will flash directly from the SD card.
I think you do require to put the phone into bootloader for that to work though ... not 100% sure, but probably worth looking up.

Ok... Been trying to search for more information for you, but with not really knowing all the correct terminology it's taken me a while longer than I thought. I've found two threads that have some of the information I was looking for:
Recover / Revive your dead / bricked HTC ELF or ELFIN
Recover HTC Touch from tricolors RUU boot-loader (Mtty)
The second link is actually found inside the 2nd post (I think) of the first thread I mentioned here, looks like they are linked in some way. Your best bet is to read through and see if it is something that may help. Let us know if this works for you...?

thanks you man,i was read the first link befor..i will see for the second
hope will work.thank you again

[Q] pleezzzzz HELP ME... i need all of ur help... PLEEZZZZZZZ

i have hp ipaq6828 phone... so i did flash it with new rom after complete full install my device came to black screen.. i was try to get turn on it again.. but it cant... its nw charging.. charge light is work fine... but no more power on or no more boot loader screen & hp logo screen... so how can i ge bootloader sccreen again??? or hw can i fix my devicce... please help... i love my phone & i dont have enought my to buy new one....

dulands said:
i have hp ipaq6828 phone... so i did flash it with new rom after complete full install my device came to black screen.. i was try to get turn on it again.. but it cant... its nw charging.. charge light is work fine... but no more power on or no more boot loader screen & hp logo screen... so how can i ge bootloader sccreen again??? or hw can i fix my devicce... please help... i love my phone & i dont have enought my to buy new one....
Click to expand...
Click to collapse
after you have fully charged your phone, try flashing it again...Happy New Year.

tnx.... but how cant flash it again... becuze its doesnt start to bootloader... i cant it power on.. plz help me... hw do i flash it????

you try to flash WM5 rom and then flash the rom. offline flash memory card.

dulands said:
i have hp ipaq6828 phone... so i did flash it with new rom after complete full install my device came to black screen.. i was try to get turn on it again.. but it cant... its nw charging.. charge light is work fine... but no more power on or no more boot loader screen & hp logo screen... so how can i ge bootloader sccreen again??? or hw can i fix my devicce... please help... i love my phone & i dont have enought my to buy new one....
Click to expand...
Click to collapse
try to Hard Reset your device , here the way to do that...
Perform a hard reset with the iPAQ. To perform a hard reset,
1. Press and hold the Answer/Send, Power, and End Call buttons.
2. While holding these buttons, use the stylus to lightly press the Reset button on the bottom (located at lower left base of the iPAQ), of the HP iPAQ until the device restarts.
3. When the HP iPAQ restarts, release all of the buttons, and then remove the stylus from the Reset button. The HP iPAQ restarts and powers on.
CAUTION: A Hard reset clears memory, deletes all data (such as owner information under Setup Wizard and AutoConfigurator) and restores the rw6818/rw6828 to its default factory settings. The action will erase all data that you have created and programs you have installed, but will keep all the preinstalled programs that were in the phone when your phone was first delivered to you. Be sure you have backed up all your data in a mini SD card or on your PC before performing a hard reset