i just bought a MDA off of my bigsister!! back sticker says WIZA200...probably meaning wizard! ipl/spl describes a g4...tried holding camera and stylus-reset...also, camera, power and stylus-reset!! NO LUCK THOUGH!!PLEASE HELP!!
koolkidcrankdat said:
i just bought a MDA off of my bigsister!! back sticker says WIZA200...probably meaning wizard! ipl/spl describes a g4...tried holding camera and stylus-reset...also, camera, power and stylus-reset!! NO LUCK THOUGH!!PLEASE HELP!!
Click to expand...
Click to collapse
BETTER STATED ISSUE:
My MDA wont go into the tricolor screen. When it tries to do it, it just turns off. I then have to pull out the battery and put it back in for it to work again. How can I fix this? I want to try a different ROM. Thanks in advance.
Power off the phone completely,then press and keep holding down the camera button and at the same time Power On the phone,you have to keep pressing and holding down the camera button while Power on the phone,release it after it wakes up,hope this'll do the trick.
Cheers
zabardast_1 said:
Power off the phone completely,then press and keep holding down the camera button and at the same time Power On the phone,you have to keep pressing and holding down the camera button while Power on the phone,release it after it wakes up,hope this'll do the trick.
Cheers
Click to expand...
Click to collapse
thanx....but already tried!! will try again and repost with an update!
Related
The power button doesn't turn on the 8125, I don't understand it. If I hold the power button along with the camera button and press the soft reset button, the phone will boot up somehow. But if I try to turn it on just using the power button, it's a no go . Anyone have any ideas?
Is this a stock 8125, or are you using a custom ROM? When did this start happening? Did you tweak anything? Please provide more information.
Sorry for creating this thread, I figured it out, the power button's solder cracked away from the board somehow, I re-soldered it and now all is good!
We dropped one of our wing's and now the ONLY thing not working is the power button at the top. I had psshutxp so I mapped "Display Switch" program to my camera button and I am using camera button to turn off the screen.
The problem I have now is when I took the battery out to change the SIM card - I don't have any way to start the phone.
I can hold the camera button and plug into my computer usb and get to the color screen where it shows the SPL and IPL numbers, is there any program or way to reboot the phone from command line, so that it can boot up?.
Please help.
Thanks.
try not holding the camera button when you plug it in.
The camera button links to the bootloader, so by not pressing it, it will skip the bootloader screen and jump to the os.
fzzyrn said:
try not holding the camera button when you plug it in.
The camera button links to the bootloader, so by not pressing it, it will skip the bootloader screen and jump to the os.
Click to expand...
Click to collapse
If I don't hold the camera button, the phone won't start.
First, I updated my PPC ROM I got a problem with the start screen, it doesn't show "smart mobility" any more... but I got the white screen instead! what should I do.
Second. now my active sync doesn't work any more the USB line is fine the connection setting is setted to "USB"... And I still can use blue tooth to sync..
HOW DO I SOLVE THE PROBLEMS?
Thanks!
Hold power nutton + Camera button and push reset button with stylus wait 3 seconds and then release the reset button but keep pressing the power button + camera button u will be then in bootloader page
rudy70 said:
Hold power nutton + Camera button and push reset button with stylus wait 3 seconds and then release the reset button but keep pressing the power button + camera button u will be then in bootloader page
Click to expand...
Click to collapse
Thank you about your advice about the bootloader page... but it doesn't solve the Splash Screen is White... Apparently it seems that my rom is also no longer can be flash!! (TT)
Ok now, I have my situation solved!
I had to turn it back to the original SPL and then putinthe official ROM to make it back up to the Original state... then re Hard-spl again....
Thanks!
How to go to the Falshing ROM ? I got the Image from HTC.. and told me to do Vol Down plus Power on..
But I cant make it work ?
Any trick ?
Thanks
Turn the phone off completely.
Hold both volume up & volume down buttons and briefly press power on. Keep holding volume buttons till the screen comes on, then follow on-screen instructions.
johncmolyneux said:
Turn the phone off completely.
Hold both volume up & volume down buttons and briefly press power on. Keep holding volume buttons till the screen comes on, then follow on-screen instructions.
Click to expand...
Click to collapse
That's how you reset to the factory defaults.
What you want to do is to completely turn off your device and then hold the vol-down button while tapping once on the power button.
Toss3 said:
What you want to do is to completely turn off your device and then hold the vol-down button while tapping once on the power button.
Click to expand...
Click to collapse
What does that do then?
its called "hard-reset" if you do this.
you can reset your device.
regards
bR00k said:
its called "hard-reset" if you do this.
you can reset your device.
regards
Click to expand...
Click to collapse
I described a hard reset. I want to know what the other described method does.
johncmolyneux said:
What does that do then?
Click to expand...
Click to collapse
It's for flashing your rom.
Hi there, i am newbie. and i think i have read a lot of here to effort to revive my device.
The device wouldn't weak up again after upgrading ROM to winmo 6.5. during ROM updating, the progress was not shown on the device, and suddently reported that updating failed. Since then i can not effort to do run on bootloader mode, even i follow to press volume down + soft reset.
can anyone help me, please.
Tx.
There are many ways to enter the bootloader (from the wiki http://forum.xda-developers.com/wiki/index.php?title=File:HTC_Elf.png):
Hold down the camera button and reset device with the stylus. Keep holding the camera button until you see 'tricolor' bootloader screen.
-An alternative way to enter bootloader:
Switch the device off by long pressing O/I (power) button. hold down the camera button while pressing the O/I button about 1 second. Keep holding the camera button until you see 'tricolor' bootloader screen.
=Alternative(universal?) bootloader(3)
As almost all htc smartphones with onboard camera, when you push and hold the camera(photo) button, and plug in usb adapter. Even a "stupid" usb power adapter will work.
Good luck!
tito12 said:
There are many ways to enter the bootloader (from the wiki.
Hold down the camera button and reset device with the stylus. Keep holding the camera button until you see 'tricolor' bootloader screen.
-An alternative way to enter bootloader:
Switch the device off by long pressing O/I (power) button. hold down the camera button while pressing the O/I button about 1 second. Keep holding the camera button until you see 'tricolor' bootloader screen.
=Alternative(universal?) bootloader(3)
As almost all htc smartphones with onboard camera, when you push and hold the camera(photo) button, and plug in usb adapter. Even a "stupid" usb power adapter will work.
Good luck!
Click to expand...
Click to collapse
Thank you bro tito12,
But my device is HTC touch diamond which no camera button on it. Refer to the article, it was mentioned to do with volume down and red reset stylus. but no respons. I also follow this thread:
Originally Posted by s1rl4ncel0t
As how to enter bootloader, press volume down and reset simultaneously
please some help,
Iwan.
I PMed you an answer
tito12 said:
I PMed you an answer
Click to expand...
Click to collapse
wew, thank you for the solution. bro tito12.