Related
I have searched the forum for a tweak that can automatically disconnect the UMTS data after being idle for X minutes but do not see it. I only see a tweak to keep it alive. I want the opposite. Any help would be appreciated.
thanks
On most roms all you have to do is press and hold the hang up button to disconnect the data by yourself.
S.K.
silent_killa said:
On most roms all you have to do is press and hold the hang up button to disconnect the data by yourself.
S.K.
Click to expand...
Click to collapse
I know that. But that is manual and tedious.
Some of my apps automatically open the data connection, so I want a way to automatically close it after it's done.
I am interested as well if someone knows of a tweak for it... When I hit the 3G area near my home, my battery goes pretty quick. On EDGE my battery life is awesome.
wimpy said:
I have searched the forum for a tweak that can automatically disconnect the UMTS data after being idle for X minutes but do not see it. I only see a tweak to keep it alive. I want the opposite. Any help would be appreciated.
thanks
Click to expand...
Click to collapse
There's a little program which does exactly this for GPRS. I haven't tried, but I would assume it also works for UMTS. To achieve this functionality, it just sets the value of the registry key HKLM\Comm\ConnMgr\Planner\Settings\CacheTimer to the idle time (in seconds) after which GPRS (and hopefully UMTS) will get disconnected.
Cheers
Daniel
tadzio said:
There's a little program which does exactly this for GPRS. I haven't tried, but I would assume it also works for UMTS. To achieve this functionality, it just sets the value of the registry key HKLM\Comm\ConnMgr\Planner\Settings\CacheTimer to the idle time (in seconds) after which GPRS (and hopefully UMTS) will get disconnected.
Cheers
Daniel
Click to expand...
Click to collapse
Nope, just tried that in my registry and it still doesn't disconnect.
GB-SOFT GPRS & Audio Tweak
i am running this on my universal for that purpose and it works on umts in tokyo. i haven't tried it on my hermes though as i want to keep the connection always on for my push email, but i think it should work on hermes as well. give it a shot, it's free.
http://www.gb-soft.cz/XDAII/product_gprs_tweak_wm5pe_en.htm
Here's something that may or may not be useful to some. I used to think that for ease of access to webpages I would have GPRS always set to on. I did this using Tweaks2k2 under phone tricks. But this was a pest as when I wanted to use wifi the GPRS kept trying to take over.
I went back to Tweaks2k2 and unchecked GPRS always on. Now when I'm not using wifi and I go to a webpage the GPRS connects nicely but the second it's downloaded the page it instantly disconnects itself and stays off - ideal for me.
Before, enabling the continuous connection and then disabling it using Tweaks2k2, if I connected to GPRS it would stay connected until I manually turned it off again, but now it does it automatically and without delay. (I'm assuming it was THIS that has created my, as and when needed GPRS connection). Certainly saves having to set idle times etc to get it to auto shut off.
Mike
Try PhoneAlarm
It has an option to do exactly this. I use it to disconnect after 2 mins and activesync to run every 30 mins and it has improved my battery life immensely.
Rob
I think it can help you. It's very usefull and saves the battery.
It's a little C program that checks the gprs/umts connections every 2 minutes. althought the pda could be suspended the program checks the connections every two minutes. If there isnt data flow then the connection is closes.
It has 4 buttons.
DISABLE: It disables the checks. So if you are surfing the web and you dont want the program closes the connection push this button.
ENABLE: Enable the checks again.
OK: Closes de window (the program continues activated. You can open the window again tapping the little blue icon in the botton).
CLOSE: Close the program.
I recomment the put it in ROM and you should create a shortcut and put it in \windows\startup directory.
Yip, another good one to try. Thanks
Mike
mikechannon said:
Here's something that may or may not be useful to some. I used to think that for ease of access to webpages I would have GPRS always set to on. I did this using Tweaks2k2 under phone tricks. But this was a pest as when I wanted to use wifi the GPRS kept trying to take over.
I went back to Tweaks2k2 and unchecked GPRS always on. Now when I'm not using wifi and I go to a webpage the GPRS connects nicely but the second it's downloaded the page it instantly disconnects itself and stays off - ideal for me.
Before, enabling the continuous connection and then disabling it using Tweaks2k2, if I connected to GPRS it would stay connected until I manually turned it off again, but now it does it automatically and without delay. (I'm assuming it was THIS that has created my, as and when needed GPRS connection). Certainly saves having to set idle times etc to get it to auto shut off.
Mike
Click to expand...
Click to collapse
Can you tell me what registry setting that modifies? I would like to have UMTS disconnect after it's done also. But do not want to install too many apps.
wimpy said:
Can you tell me what registry setting that modifies? I would like to have UMTS disconnect after it's done also. But do not want to install too many apps.
Click to expand...
Click to collapse
Sorry don't know answer - maybe somebody does??
Mike
It doesnt modify any registry setting. It is a program checking the state of the ras connections each 2 minutes........ Later i will post the source code. Now i have to go.....
danielherrero said:
It doesnt modify any registry setting. It is a program checking the state of the ras connections each 2 minutes........ Later i will post the source code. Now i have to go.....
Click to expand...
Click to collapse
I'm sure you are right but ever since I used Tweaks2k2 and turned the GPRS setting off the always on connection it disconnects from GPRS the second the page is downloaded. There is no wait for a period up to 2 minutes. As soon as I tap on another link to another webpage it fires up GPRS again followed by an instantaneous disconnect after page downloaded. Of course if it's caching the page the period of time it takes to display the page might be getting on for two minutes. However many pages take far less time than that - e.g. text only pages and I'm not aware of any delay in the GPRS disconnecting but I'll test this tonight.
Bottom line is this works for me, but as there seem to be, according to posts above, lots of applications to power the GPRS on and off (and stay off until it's needed), then presumably we are all happy now??
Mike
harryk1372 said:
i am running this on my universal for that purpose and it works on umts in tokyo. i haven't tried it on my hermes though as i want to keep the connection always on for my push email, but i think it should work on hermes as well. give it a shot, it's free.
http://www.gb-soft.cz/XDAII/product_gprs_tweak_wm5pe_en.htm
Click to expand...
Click to collapse
Do you know which registry key it modifies? I rather manually edit the registry setting then install this program for that sole purpose.
thanks
wimpy said:
Do you know which registry key it modifies? I rather manually edit the registry setting then install this program for that sole purpose.
thanks
Click to expand...
Click to collapse
That is the program I linked to in the first post, and it uses the registry key I mentioned.
Just to double-check - after you made the change to the registry, did you shut down (keep power key pressed until a dialog box pops up - do not just soft-reset!) and reboot your TyTN?
Also, make sure GPRS Always-On is off: check that "HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A3 8-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\<your GPRS connection name>\AlwaysOn" is set to 0.
Cheers
Daniel
tadzio said:
That is the program I linked to in the first post, and it uses the registry key I mentioned.
Just to double-check - after you made the change to the registry, did you shut down (keep power key pressed until a dialog box pops up - do not just soft-reset!) and reboot your TyTN?
Also, make sure GPRS Always-On is off: check that "HKEY_LOCAL_MACHINE\Comm\ConnMgr\Providers\{7C4B7A3 8-5FF7-4bc1-80F6-5DA7870BB1AA}\Connections\<your GPRS connection name>\AlwaysOn" is set to 0.
Cheers
Daniel
Click to expand...
Click to collapse
All my other registry edits only require a soft reboot.
Btw, my AlwaysOn for that key is defaulted to 0 anyways. So just this registry setting alone does not disconnect my data when idle.
A side note, I have an 8525 and not a Tytn, but that shouldn't matter.
wimpy said:
All my other registry edits only require a soft reboot.
Click to expand...
Click to collapse
That depends on how quickly you reboot after you made a change. The registry is not immediately flushed back to Flash memory, so if you do a soft reset too quickly, your registry changes may get lost. A shutdown with the power key forces writing any unsaved registry changes to Flash memory, so you're always on the safe side.
Something different: SKTracker can make snapshots of a system (including the registry), and also compare such snapshots. The trial version is limited, but it can create snapshots and the resulting "diffs". I used that tool to find out what GPRS Tweak does. Might also be of interest to you. And you can uninstall it afterwards.
Cheers
Daniel
I'm suprise not more people are asking about this since UMTS appears to drain the battery so quickly. Oh well.
Hi,
Has anyone had the problem before, that when your screen switches off or goes in to standby, the Data Connection is lost.
Is there a fix for this?
Your help is much appreciated.
same here
I have the same "problem".
This is annoying since I use an app called Trackr, which displays live gps position.
you can change this with advanced config
I checked through all the configurations in advanced config and I dont see any relevant setting for keeping my connection "alive" even when my phone goes in to standby mode.
Could you point me to the right configuration? I might be overlooking it.
canthonyza said:
I checked through all the configurations in advanced config and I dont see any relevant setting for keeping my connection "alive" even when my phone goes in to standby mode.
Could you point me to the right configuration? I might be overlooking it.
Click to expand...
Click to collapse
navigate to network->turn off wi-fi if no activity and change it to No
You could use Diamond Tweak for it. Setting 7.1 in this program allows you to keep WiFi running in standby mode.
What about data connection but NOT wifi connection? The data connection to my phone service always disconnects itself when in standby. Maybe I should use a new radio?
makeveral said:
navigate to network->turn off wi-fi if no activity and change it to No
Click to expand...
Click to collapse
Wow!! Thank you Sir, that worked for me!!
My D2 will automatically disconnect the wifi connection when it goes in standby. My old cruise would always keep the connection alive, so that it would be available immediately after turning it on. Is there a fix for this?
A google search reveals!!
http://forum.xda-developers.com/archive/index.php/t-368241.html
Edit: although that worked on my XDA Orbit 2 (Touch cruise / polaris) it dont seem to work on my Diamond 2
I found this key in the registry:
HKLM\Comm\TNETW12511\Parms\HTCKeepWifiOnWhenUnattended
and changed it from 0 to 1, but that didn't work. After a restart the value was automatically changed back to 0.
Looking around on the HD forum it seems that HD has the same behaviour. People changed that using a program called HD Tweak. I guess we need D2 Tweak...
i would also like to see a solution for this
I have experienced this problem also. If you have push internet scheduled and the phone is on standby, it retrieves the data via data connection/3G as opposed to your WiFi.
Additionally, if you take your phone out of standby, it takes a few seconds for the phone to re-establish the WiFi connection. If you are too quick to access the internet or update weather - again it will start to do this through the data connection.
Does anyone know how to resolve this?
did you try Advanced Configuration Tool? You can enable/disable data connections, set them to always on and enable WiFi on standby.
tomkarb said:
did you try Advanced Configuration Tool? You can enable/disable data connections, set them to always on and enable WiFi on standby.
Click to expand...
Click to collapse
Does it exist for D2 too already?
Yeah got it and it works on D2, the enable WiFi option is there
You could also go to Settings -> More -> Connections -> Wi-Fi -> Wireless networks -> Menu -> Advanced, there you can change how long the Wi-Fi radio should be on if not connected to a wireless network.
Unfortunately, www.touchxperience.com is down, so I can't download it now.
helinus said:
You could also go to Settings -> More -> Connections -> Wi-Fi -> Wireless networks -> Menu -> Advanced, there you can change how long the Wi-Fi radio should be on if not connected to a wireless network.
Click to expand...
Click to collapse
Thanks for the tip. This doesn't solve my problem, but it's good to know.
I found a 3.3 cab elsewhere. What option exactly did you change to keep wifi on on standby? The only logical one I found is Network >Turn off wi-fi if no activity. I changed that from yes to no, but that didn't help...
I know how to do it but it requires some code to accomplish - I actually tested this yesterday on my TD2 (the advanced config trick does not work with TD2). Unfortunately I do not have the TD2 with me right now ... Perhaps I'll muck with it a bit later anyways, else you'll have to wait 'til I have the TD2 in hand again Monday or Tuesday.
It takes a ****load of power to do this though, and I'm not sure if it works in true suspend... it works for unattended mode though.
Well, I found the option in advanced config 3.3, hidden under "More options". But indeed it doesn't work. Wifi still disconnects on standby and starts reconnecting after standby. If you have a solution Chainfire, I'd be happy!
Tomkarb, can you confirm that the Advanced Config trick really works for you?
Isn't there anyone that has a solution? The Schapps advanced config thing just doesn't work
The solution is in here:
http://forum.xda-developers.com/showthread.php?t=524490
Thanks! That works indeed!
Code:
[HKEY_LOCAL_MACHINE\Comm\TNETW12511\Parms]
"HTCKeepWifiOnWhenUnattended"=dword:00000001
I never found that out, because I always soft reset immediately afterwards, thinking that was necessairy for the change to become effective. The soft reset wiped the change away though.
I've made a cab that changes the registry value to 1. It also copies the cab to the installationdir and adds a shortcut to it in the start menu. So you just have to run it from the start menu after each soft reset/restart (if you need wifi on standby). It only works when you execute it when wifi is off. Turn it on after installation.
There's a great freeware that i use called WkTask, which is a launcher, among other things, and it has the option of turning off the screen, but not putting the phone into standby. Disable the automatic power off and turn off the screen, this should solve your problem. However, i'm pretty sure your battery will drain a whole lot faster with the device never entering standby and the wifi on.
For added functionality, create a shortcut in the windows directory called 'long_power.lnk', and point it at the same file that WkTask uses (you'll see the path when you add it to the launcher, its a 'command call' btw). Then you can press and hold the power button to turn the screen off instead of powering off the phone (which is something i never do, does anyone?)
Hope that helps.
Thanks for the tip. I don't use wifi very often, only sometimes to remote control my pc. So most of the times I want it to go in standby and save as much power as possible with wifi off.
BTW, another solution for some of you may be to use a different ROM. I'm using Topaz Essentials 1.6 ROM (TESS1.6) from chef Aman now, and this ROM doesn't have the wifi turning off problem.
deechte said:
Thanks! That works indeed!
Code:
[HKEY_LOCAL_MACHINE\Comm\TNETW12511\Parms]
"HTCKeepWifiOnWhenUnattended"=dword:00000001
I never found that out, because I always soft reset immediately afterwards, thinking that was necessairy for the change to become effective. The soft reset wiped the change away though.
I've made a cab that changes the registry value to 1. It also copies the cab to the installationdir and adds a shortcut to it in the start menu. So you just have to run it from the start menu after each soft reset/restart (if you need wifi on standby). It only works when you execute it when wifi is off. Turn it on after installation.
Click to expand...
Click to collapse
Does not work on my HD2
hi all,
i have a different problem. data connections stops working suddenly after 3-4 minutes of idle connection. i dont understand whats happening. i have tried all. when ever i reset the connection it starts again and stops after some time. i have tried all radios. please help
Thanks
chowdarygm said:
hi all,
i have a different problem. data connections stops working suddenly after 3-4 minutes of idle connection. i dont understand whats happening. i have tried all. when ever i reset the connection it starts again and stops after some time. i have tried all radios. please help
Thanks
Click to expand...
Click to collapse
Hi chowdarygm,
when you say data connections, are you referring to Wi-Fi?
If you are using Advanced Configuration tweaking tool, open the application and then select Menu | More Settings | Connections. The options below should let you know if your connection is set to automatically disconnect after a specific amount of time.
EDIT: also check HD Tweak as you can set you Data Connection to automatically disconnect after a certain amount of time.
I hope this helps you out.
Regards.
Mastoid said:
Hi chowdarygm,
when you say data connections, are you referring to Wi-Fi?
If you are using Advanced Configuration tweaking tool, open the application and then select Menu | More Settings | Connections. The options below should let you know if your connection is set to automatically disconnect after a specific amount of time.
I hope this helps you out.
Regards.
Click to expand...
Click to collapse
thank you. i will check with this and see if this solves
chowdarygm said:
thank you. i will check with this and see if this solves
Click to expand...
Click to collapse
No problem, i will keep my fingers crossed for you
I've had problems with a couple of roms being unable to connect to 3G, even with the correct radio. Most of them are fine there's just 2 or 3 that didn't work. Never figured out why.
chowdarygm, this is a power management issue meaning the phone is pre-set to disconnect after it's been idle for awhile so as to save battery. It's normal. If you haven't fixed your issue by now and If you're handy with a registry editor, go to HKLM\Comm\PPTP1\Parms. Inside "parms" look for "disable power management" and set its dword (decimal value) to 1, hit "ok" and softreset. Your data should then stay on continuously. This setting allows me to stay connected to my VPN using the PPTP protocol, but to do so it keeps my carrier data connection alive. This should work for you whether or not you use a VPN. Good Luck!!
S3
Hi all,
Bit of a problem here, I know that in the ServiceMode menu (dialing *#0011#) there used to be an option for WiFi Power saving. After upgrading to the latest firmware, that option is no longer there. My problem is, I used to use that to solve a problem with an app I used by switching it off then switching it on when I wanted to use WiFi tethering (as this doesn't work with WiFi Power Saving turned off).
Before the upgrade, I turned it off... So, I need to know what this setting actually sets. Is it an option in build.prop? Is it a setting somewhere else? Is there another way to set it?
I want to set it back to, "on" without doing a factory reset as I no longer use the app that had issues with WiFi power saving being on but I do need to use WiFi tethering.
Thanks for any help in advance.
I hate to bump/double post but anyone have any idea? Or if you don't know, do you know how I might find out? I've Googled my fingers raw.