Database Users

Hadware Buttons Not Responsive

Hi all
I bought a JasJam about an year ago, and it has been working fine.
About 5 weeks ago, I flashed it with HardSPL 7, Radio 1.50 and Schap's 3.60a.
It worked fine till yesterday when suddenly following buttons stopped working: IE, Messaging, Left & right soft keys, start, ok, green & red buttons. Rest of the buttons, keyboard etc are fine. There was no impact, no "sudden movements". The buttons just stopped working! I mean, one minute they were fine and the next minute, they were screwed.
I have done following to fix this (in order)
1. Soft reset
2. Hard reset (which shows that there is no problem with the hardware)
3. Flashing with Schap's ROM again
4. Flashing with 3des ROM
5. Flashing with Sleuth's ROM
6. Flashing with Cingular (WM5)
And still, no use! Buttons still don't work.
Any help would be highly appreciated.

Does the silence says: You have to live with it.
???

More Updates :s
Now I am not able to delete anything I type. :s Not even while using the onscreen keyboard! I can see that when i tap on the backspace button, it highlights, but the text doesn't get deleted! I have tried this in almost any place which allows you to enter text. :s
I think I will go back to my original shipped ROM and bootloader. :S

Strange stuff happening! Downgrading to olipro 1.10 has solved the backspace problem. How can a bootloader affect a function like that? :s

Back to shipped bootloader and ROM (not the radio) Still the buttons are not functional.
I also opened up the phone and cleaned the buttons, made sure all connections are properly in place. Put everything back together, and no, the buttons don't work.
What do I do?

I have tried a thousand other bootloaders, radios and ROMs... But these buttons wouldn't work?
Where are the geniuses like oli?

I have the exact same issue.. I have pretty much tried all SPL/Radio/ROM/App combinations, including the 1.01 IPL, original SPL, and WM5 that ships on the Tytn from HTC... And, just like you, the keys sometimes work, and then suddenly they stop. Restart or hard-reset seldom brings them back. I know it's not hardware issue because holding down the "-" and "-" keys while resetting always works. I also observe the LEDs on the front panel go all whacky. Sometimes the power LED, which normally blinks on battey power turns on and stays that way; sometimes it doesn't come on at all.
My guy feeling is that this is not ROM related, and somewhere along the line while I was enjoying the "flash-o-palooza", something got corrupted in the flash memory.
I am now looking for a method to do a "harder-reset" that will clean out the whole thing, reflash the bootloader and build it from scratch.

I think the buttons are not properly passing interrept requests to the OS, which as you correctly mentioned is a flash memory / bios problem. (I don't know a lot about hermes architecture)
HTC provides a diagnostic sd card in which you can check if the buttons work fine. I will try to get my hands on one of those.

Did you try going back to Wm5?

whistler4ever said:
Did you try going back to Wm5?
Click to expand...
Click to collapse
Yep.. Many times.

any luck with this? can u get to bootloader mode with the keys?

not believing that it would be hardware problem, I disassembled already some times my TyTn and I did not have sucess. If someone have sucess, post here please

the only obvious thing is that the keybddr.dll driver is not be loaded properly. how do u normally load the rom's? do u let the software boot the phone, or do you put it in bootloader mode first?

as I use a Windows Vista, the ROM upgrader have to be done in the Bootloader Mode
But, Sometimes the buttons works, and in next minute, they die again
its a misterious

Hardware buttons also not working
I am also experiecing this problem. Occasionally the hardware buttons will work, then if I open the slider they stop working. I have also tried updating firmware etc.. but it hasn't helped. The buttons will work if i press the left and right keys while pressing the reset key to do a hard reset. They work every time doing this, so it seems like a software problem. But I don't understand how a s/w problem like this can remain there even after firmware update and hard resets.
I have opened the phone up several times, because I have another problem, or two. As much as I love the phone it has been totally unreliable. It shipped with the LCD not working, I diagnosed that as a faulty ribbon cable, which I replaced, that made the LCD work. But then the earpiece speaker and the front camera didn't work. Now this problem... this is starting to drive me crazy.......

Hi, I have the same problem, I think. Sometimes when I play games, browse the phone or slide down the keybord the buttons below the screen just stop working. I have also tried to flash different roms, but to no good. There is a temp fix thou but it work slow sometimes, if I scroll with the wheel for a bit(the scroll time varies) the button seem to work, but only for a little while.
Does anyone have any news on this issue, cause i can't use any program that need these buttons.

I also have this problem, I guess I'll have to send it in to get it fixed :|

Problem Solved
I have managed to resolve the problem. It started compounding which made me think that it had to be a hardware problem. The first symptoms were that the front bottom hardware keys stopped working. Then the LCD would not align properly after sliding the keyboard, so I would have a white bar at the top and/or left of the screen.
Next the top hardware buttons stopped working, and then finally all I had was a white screen with nothing on it.
I replaced the flex cable that connects the front of the phone to the main board and it has solved all of my problems. I had already replaced this cable when I first got the phone because the one that came was with it was faulty. Now after just a few months of use the replacement one wore out as well. It seems to be the weak link in the build of these phones.

crajoh said:
I have managed to resolve the problem. It started compounding which made me think that it had to be a hardware problem. The first symptoms were that the front bottom hardware keys stopped working. Then the LCD would not align properly after sliding the keyboard, so I would have a white bar at the top and/or left of the screen.
Next the top hardware buttons stopped working, and then finally all I had was a white screen with nothing on it.
I replaced the flex cable that connects the front of the phone to the main board and it has solved all of my problems. I had already replaced this cable when I first got the phone because the one that came was with it was faulty. Now after just a few months of use the replacement one wore out as well. It seems to be the weak link in the build of these phones.
Click to expand...
Click to collapse
I don’t think you got the same problem as us, if you check almost all the other button problem threads they are about the white screen but since we in this thread have not gotten any white screens or some of the other symptoms I'm quite sure it’s not the same. Also some with our problem have tried to change the flex cable but it has not fixed the problem.
*edit - I did not put the angry smiley on this post.

Me too!Anybody can soleve it?I found that when they aren't woring,we can touch on screen or press ok button on the left once or twice,they work again!

Joypad and Softkeys not responding

I just flashed my girls 8525 and her joypad, softkeys, phone keys aren't responding anymore. They were responding at first, so I just figured a hard reset would do it. But it's still not working. The top message and IE button works though. Also, when I slide the phone open the softkeys there work. I can't even hard reset the phone.

Can you Reflash the phone? Maybe just a bad install.

chipsxj said:
Can you Reflash the phone? Maybe just a bad install.
Click to expand...
Click to collapse
Did that already...still not working

I think my phone is having the same problems as yours.
None of the physical buttons on the bottom of my phone are working. My scroll wheel works fine, as do the Power, Comm, and Camera buttons, and all on-screen "buttons" work, but it's like the bottom group of physical buttons on the phone are not responding. It's been somewhat intermittent, but now they're basically not working at all. I can't even hang up the phone with the End key, or activate the dialing pad with my Phone key.
I had done all of the WM6 Cingular upgrades from the Cingular website, and it seems my problems started shortly after that.
Just this morning, I ran the "Clear Storage" command, and now my system is running WM6, Build 18128.0.4.4, ROM version 3.62.502.3, ROM date 10/11/07

Have you tried flashing back to the ROM you had before that was working?
If it is not ROM related.......I would fear some hardware issue exist.
Can you go into the button settings under settings and reassign the button functions?

I'm downloading the ROM from HTC right now @
http://www.america.htc.com/support/8525/software-downloads.html
Will see if that fixes it, then I guess I will have to figure out where the previous ROM versions are archived, and download/install previous versions if this doesn't fix it.
Under the Button settings - the only 4 buttons that it allows you to reassign are all working fine. It's only the buttom cluster of buttons below the screen that are being "tempermental".

Oh - I'm fairly certain it's not hardware related because I can reset the phone, and push the Phone button, but then it quits working. It's like the buttons aren't being released / activated after the first time they're used.
Hopefully the ROM reinstall will fix it...

I'm having the same problem. All soft keys work for a sec after SR but go dead. I don't think it's rom based because I have HTC WM6 Rom, and all my troubles started after I put Pointui on my TYTN. I've Hard reset once already, might have to do it again. Anyone have any ideas why this is happening. I also get occasional white screen, again none of this happened before Pointui.

I get the occasional white screen, and I've never installed the Pointui that you mentioned.

Well, I just reinstalled the current HTC official ROM for the 8525, and without installing anything else, my buttons are still intermittent. I think it's the version of the ROM since the device is essentially "clean", correct?
The buttons seem to consistently function properly ONLY after I roll the scroll wheel. It's most definitely a software glitch.
edit to add: while randomly navigating around, I got the White screen.

Well, I've been on the phone with HTC, and AT&T's warranty department, and was basically told I could shove the phone up my a$$. What a POS operation.
Since my phone is out of warranty, they said if I wanted to do an "Out of warranty exchange", I could politely hand them $497, and they will joyfully ship me a replacement REFURBISHED phone. WTF!?!
In speaking with the warranty repair department, they said they would be HAPPY to take a look at it, and evaluate the problem, and call me with an estimated cost of repairs, of which the absolute minimum cost I would incur would be to the tune of about $129 - I was so appalled, I didn't write down the exact price. I told them I am 100% unwilling to give them money to fix a problem that I feel their software created, politely said goodbye and hung up the phone.
So, I'm essentially stuck with a phone that HTC / AT&T broke via their WM6 ROM update, and they're not willing to do anything (for free) to fix their mistakes.
My phone has suffered NO water damage, and no physical damage.
I did a ROM reinstall this morning, I did a hard reset (pushed the two dash buttons on the bottom cluster and held in the stylus reset button), and the only way I can make the cluster operate is to roll the wheel a few times, and then the buttons work (at least for one or two clicks, and then I have to roll the wheel again).
What a joke.
So, I guess I have to figure out how to revert to a previous WM5 ROM. Is this possible?

Everyone here is getting the same errors as me...the occasional white screen and so on. I've never tried scrolling the wheel to make the buttons recognize. I just hit the power button -> sleep mode -> power button and the buttons work again for a short time. LUCKILY phone is still in warranty and AT&T will ship me a new one <3 Buisness care...I'm thinking it's not software related because I installed schap's windows 6, on every last one of the hermes I've came across(About 10). Something might just be wrong with these hermes.

I have same problem with TYTN.... and what to do???

Okay - I bought a new phone over the weekend. As a last effort to fix the phone, I decided to google my problem, and I actually found the solution in the first link I clicked on. I feel pretty stupid, actually.
Slide your keyboard open, and look at the backside of the screen. The phillips screw at the bottom left of your screen - try loosening and/or tightening that screw. Mine was loose, so I had to tighten mine. My wife dropped my phone a week after I bought it (well over a year ago), and I guess the screw eventually worked itself loose.
My button pad now works like it should.
Guess I'll be taking my new phone back to the store and just keeping the 8525.

Did someone knof will that repair if i downgrade WM6 to WM5?

same thing is happening to my X01HT, wheel then it works for a few times and then it stops agian, wtf!?

WM5 downgrade did not resolve front buttons problems
ivanish said:
Did someone knof will that repair if i downgrade WM6 to WM5?
Click to expand...
Click to collapse
I have had the same problem for quite a while now. I upgraded from the official WM5 that came with the TyTN to the official WM6. After a while the buttons on the front started to be intermittent. As well as the memory card "disappearing" and QWERTY keyword randomly dying (resulting in display fixed to landscape mode), both resulted in a hard reset to resolve. Anyway, to cut a long story short I contacted HTC who said they would repair the problems under warranty (as it was still in warranty) but due to my very misfortune the device suffered liquid ingress THE DAY BEFORE I SENT IT OFF!!! Thereby voiding the warranty (as notified by HTC after inspecting the device).
So, I would have to sort this out myself. I tried various unofficial ROMs, all of which work "for a while" (maybe a day or two) and then go back to being intermittent, and then not working completely. I have also used a WM6.1 ROM which seemed to work for a lot longer, but then stopped working just like the rest.
As of today I finally downgraded from WM6.1 as I was reluctant to do so before as I love some of the new features of WM6.1. But I took the plunge to see if it would resolve the button problem, as it was becoming a pain not having those buttons working. And the answer is........NO! After just a few minutes of me setting the device up the buttons ceased working.
I find the problem quite strange. I am a computer professional with an electronics background, and I am not convinced the problem is either software or hardware related (i.e. I am not convinced which is the problem). I have dismantled the phone on two occasions and all connections are connected perfectly. I have changed the ROM numerous times and tried different version of WM but all to no avail. One of HTC's solutions is to check whether a button is stuck, but all buttons are fine.
I have recently purchased Tomb Raider for Pocket PC, and within that game I have on numerous occasions "lost" the front buttons (on the occasions that the buttons were working). I happen to play about with other buttons, and after pressing the Comm Manager button all the front buttons returned to working order (but then they would stop working again shortly after). I tried this numerous times in Windows Mobile (6.1) when the buttons ceased working and it did not resolve the problem, however it still does in Tomb Raider.
After downgrading to WM5 I have noticed that with every power on and power off all the buttons and lights works correctly (in WM6.x if the buttons had ceased working then the lights would remain on even when in standby). So, it would appear in WM5 you can restore the buttons functionality by pressing the standby button twice (once to turn it off and once to turn it back on).
So, I am puzzled. Is it hardware or is it software? Any ideas? Is it a driver issue? Is it not informing a chip somewhere to power up the buttons? Is it a loose connection? Who knows? HTC certainly will not tell me (obvisouly because they want me to pay for them to repair it).
So, any ideas?
Adam
BTW the memory card problem and QWERTY keyboard problem were resolved by using an unofficial ROM.

Check that the "ok" button next ot the jog wheel is not stuck. Seems mine is, need to open the phone up and fix it.

I actually do not have problems with the D-pad but I'm getting problem with the Answer(green) and Hang Up(red) button...
Anyhow... anyone has a solution since then?

similar problems
hi i thought i would join this discussion as i have been having similar problems with my tmobile vario 2. i had it for a year with no problems and then the day i upgraded it to an orange tytn II the bottom buttons stopped working. i have taken the whole phone apart to check connections and everything seems fine and when i put it back together the buttons work fine for about a minute and then stop again. i have been tearing my hair out, i still have the original wm5 installed that came with the phone and before it stopped working it had been kept very well and not been knocked or dropped or anything. All the buttons on the top and side and the control pad and center button at the bottom work the only buttons that dont work are the 6 at the side of the control pad which pretty much renders the phone useless as a phone.
IF ANYONE SOLVES THIS PROBLEM OR HAS SIMILAR EXPERIENCES PLEASE CONTACT ME!!

HD2 New Weird Screen wont unlock issue - help

this is a new problem for me. I have been using the most recent Dutty ROM together with Mdeejay Android ROM without any problems. All of a sudden, when I try to unlock the screen after STANDBY, it just wont register my touch, as if I am not touching it. It boots up fine, and on the first unlock works fine, but when the screen lock goes on again (after every standby) it just wont unlock. So I am stuck (I use Exchange and our policy forces the lock after standby, so I have to use it - and its worked fine for ages).
If I boot into Android, it works fine, the unlock works fine, yet strangely when I try to shut the power down, THAT screen also doesnt register me touching it.
I have hard reset but even before I load an app or do anything, the problem exists.
I also reflashed a DUTTY ROM. Same problem.
I tried CHT lockscreen - same issue. After Standby, screen doesnt register my touch.
Anyone have any ideas?

Same problem for me.. Restoring a backup image after being forced to hard reset this morning and now suddenly my HD2 won't wake up after sleeping. Pressing my end key only lights up my buttons but I have to pull the battery to reset. I'm thinking it's related to me having CHT installed, yours however might be a different problem.

I had something similar. It was right after I had installed CHT 2.0 and was looking to make the top and bottom bars transparent. I found a cab that claimed it would do this and installed it. Sorry, I don't recall what cab it was and I have deleted it. When I rebooted Sense would hang and if it got into a lock it would only move the slider a little where it would stop. Luckily, I had done a backup that morning right after I installed CHT 2.0 with Sprite so I restored and all was well.
I don't know if this is of help but I figured I'd throw it out there.

it wakes up, but wont register when I try to swype the unlock screen.

ekerbuddyeker said:
it wakes up, but wont register when I try to swype the unlock screen.
Click to expand...
Click to collapse
Your lucky you get that far lol.. I don't get any waking up. Plus I now uninstalled S2U2 and still no change. Disabled all locks of any kind and still frozen with sleep of death with in 1 min of hitting power to sleep it. I REALLY don't want to to a hard reset and install everything from scatch.. UGH.

weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?

ekerbuddyeker said:
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
Click to expand...
Click to collapse
bump this is horrid

same
im having the exact same issue. I have flashed 3 different roms and flashed to the newest radio (2.15).
I started out using energy rom, didnt help. Flashed a newer energy rom, didnt help. Now im using the dusk rom, same issue.
SOMEONE PLEASE HELP!!!!

It's a quite common digitizer problem lately... it seems the HD2's digitizer is failing on some units, possibly because of usage with android? my father's device acted the same way, only it sometimes did register touch and other times, not.
My device doesn't have these problems, yet. But seeing that a lot of people here are experiencing these issues, and with the notion that I use android pretty much all the time since I first booted my device, i'm pretty sure i'll experience it soon as well..
Make no confusion thou, the assumption that android effects the digitizer are purely my own thoughts on this matter, no such thing has been proven and the conclusion that android is effecting our HD2s is based purely on the statistics of touch screen failures in the last few months since android has been made publicly available in a working form.
EDIT:
Those seeking A solution, as far as I know, the only solution is sending your unit to HTC for repairs, you'll get it back with a note that says that they replaced your digitizer or your screen, at least these are the reports I heard from the other folks whom followed this procedure.
Good luck.

HTC HD2 Screen Lock
I have only used Android a few times on this 'phone and it has a standard HTC/O2 ROM installed so it must just be a problem with the top part of the digitiser. With android running the unlock is at the bottom and is unaffected.
Is there any way of testing the digitiser before deciding whether to get a repair sorted,
Ta,

link:
htcphones.net/htc-hd2-problems-with-touchscreen
short version :
change digitizer

ekerbuddyeker said:
weird update...
It has something to do with which key i witch the device on with. If I use the phone key, I can swype the unlock. If I use the power key, it doesnt register.
Another related issue: when i hold the power key to switch off, it wont register me touching power off or reboot etc. so I have to take the battery out to switch off. Its the same in Android.
Anyone know? Hardware issue?
Click to expand...
Click to collapse
A friend was complaining to me about something like this since last week. I could not figure it out so I went ahead and installed Android cm7 and still have the same issue.
Until I read this post after searching through the forums all over Screen now unlocks perfectly fine but only using the green Phone icon. If I try to wake the screen with the red Power button, the screen is unresponsive.
Thanks for the info.

Already happened tome its a hardware issue can't be fixed so if you still have warranty on ur phone send it to htc for repairs b because it tends to get worse n worse soon other keys will start to give in I think that's one reason why most android phone been switching to capacitive buttons because hardware causes this sorta issues and send it in for repairs to get it fixed
Sent from my SGH-T959 using XDA App

the same issue with me , is there is any solution for that .

Wakeup the phone using the send button.it will work

[Q] Touchscreen Problem

Alright, so here's my problem. My touchscreen won't response to any finger movement. I could press the hardware buttons like power, volume and talk and it response to that but my problem is mainly trying to get inside my rom. I tried flashing rom via NAND and via clockwork mod and nothing helps. The G Sensor seems to work just fine because it rotates the screen when I'm inside my ROM. I could go back into MAGLDR but I don't think anything there is going to help?
Has anyone else experience anything like this and if so, what did you do to solve it?

had same problem, found a FIX
i have had same problem past couple of days. i was running darkstones SuperRAM_FroYo_V1.5 build with oz 2 cleanex rom. i know that every now and again it would be a pain to unlock the device with the agonising wait for the lock screen to show up but this time the touch screen would not work at all not recognising any movement and not dragging the unlock button across. i would have to take the battery out and restart, even some times touch screen would fail completely when in winmo too, got to a point when 3 days of working then not working and taking the battery out a million times to boot back into android to unlock the device, then touch screen died completely.
FIX- Hard reset
will reset windows mobile. all data on device will be lost.
hold down up-vol key and down-vol key, soft reset button and then power button till it displays formatting screen. follow on screen instructions.
hope this helps.

tidygrant said:
i have had same problem past couple of days. i was running darkstones SuperRAM_FroYo_V1.5 build with oz 2 cleanex rom. i know that every now and again it would be a pain to unlock the device with the agonising wait for the lock screen to show up but this time the touch screen would not work at all not recognising any movement and not dragging the unlock button across. i would have to take the battery out and restart, even some times touch screen would fail completely when in winmo too, got to a point when 3 days of working then not working and taking the battery out a million times to boot back into android to unlock the device, then touch screen died completely.
FIX- Hard reset
will reset windows mobile. all data on device will be lost.
hold down up-vol key and down-vol key, soft reset button and then power button till it displays formatting screen. follow on screen instructions.
hope this helps.
Click to expand...
Click to collapse
well i have woke up this morning to be able to unlock my device to then locking it and not being able to unlock it again!!! i had notification to say it had managed to restore 16 apps whilst i had been asleep so i am thinking there is a dodgy app out there some were

mazdarider23 said:
Alright, so here's my problem. My touchscreen won't response to any finger movement. I could press the hardware buttons like power, volume and talk and it response to that but my problem is mainly trying to get inside my rom. I tried flashing rom via NAND and via clockwork mod and nothing helps. The G Sensor seems to work just fine because it rotates the screen when I'm inside my ROM. I could go back into MAGLDR but I don't think anything there is going to help?
Has anyone else experience anything like this and if so, what did you do to solve it?
Click to expand...
Click to collapse
Sent from my PC36100 using XDA Premium App

I have this problem and have found no way to fix it, I have tried everything except possibly going to the clk loader instead of magldr. when i put the phone to sleep with the power button is when i have the issue of not being able to unlock my phone in Android. I have tried task 29, going back to original windows roms, sd and nandroid, it is a hardware issue related to the digitizer as far as I'm concerned. I love my HD2 and really need to fix or find another one. I know this doesn't help, but maybe a little more insite if nothing else

I had the same issue. With my 1st HD2 it started as an intermittent problem, then eventually completely stopped working. With my replacement it just started to happen again. I immediately flashed back to stock tmo windows and the touchscreen would work so long as I did not try and put the phone on standby or wake the phone using the end key. If the phone went to standby on its own, the touchscreen would not work either. I changed the settings so that the phone would not go into standby at all. I then learned that locking the phone from the windows menu and allowing it to go to standby that way somehow averted the touchscreen problem. After 2 days, the problem seemed to resolve itself, almost completely. If I try and wake it using the end key, the touchscreen still wont work, but every other button on wake works. Also, putting it in standby with the end key seemed to not cause the problem any longer.
I dont know if the issue varies per person, but what worked for me was going to stock windows for a couple of days, then starting over with android. I guess it depends on how far along the problem has progressed.

Look at my thread in my Sig about the Unresponsive Screen Solved. This sounds exactly as that. And there are various workaround solutions through out the post.

[Q] Touchscreen semi-unresponsiveness?

I've looked around and a lot of people have fully unresponsive screens. However, mine is I guess semi-unresponsive?
I can perform all my functions fine, but when I try to power down my phone via power button. It pops up the power menu and then my screen becomes completely unresponsive. I can only use the hard buttons, but nothing on the screen works. When I press the power button again to go into standby, it'll work like normal and my screen works again, all until I try to go to the power menu again. Does anyone know what is wrong?
I forgot which HD2 I'm using, but I know I bought it in the June of it's release and I'm in the US.
My current ROM is HyperDroid-GBX-v12, but I don't think it's a ROM issue since the previous ROM I had was even worse, same problems, but unresponsive at the lock screen at times.
Thanks, and let me know if I can give any other info.

Has this been happening since you flashed the Rom or is this a new problem?

This has just started happening. I think it was present to a lesser extent before, but I am noticing a lot more recently. I flashed a new ROM because I thought it was my old ROM, but the problem isn't going away.

For a work around, download the quick boot app from the market and power your phone off that way.
What Rom are you running now btw?

My current ROM is HyperDroid-GBX-v12,
Thanks for the work around, but I'm really wondering what the problem is since it persists between ROMs. I'm thinking hardware, but then it's so specific that I'm not sure.

The only other think I can think of trying to wipe your phone via CWR by formatting data, boot, system, Sd-ext (if applies), cache, and Dalvik cache. I know you re-flashed your Rom already but did you do a full wipe prior? It could be data corruption from the previous Rom. Just trying to troubleshoot

I'm currently having touchscreen issues myself. At first I though mine was totally hosed but then I read on some thread if you press the power button hard it can revive the screen. It worked for me. I assume there must be some loose cable somewhere beneath the power button that's causing these issues. It's probably just a coincidence that it stops working when you hold it down and you are really having the same issue as me.

I did wipe everything, but now I think of it I think I forgot to format my SD card. I'll try it now thanks.

Nope, still doesn't work. I'm at a lost for what's wrong right now =\

JesusFreak316 said:
I'm currently having touchscreen issues myself. At first I though mine was totally hosed but then I read on some thread if you press the power button hard it can revive the screen. It worked for me. I assume there must be some loose cable somewhere beneath the power button that's causing these issues. It's probably just a coincidence that it stops working when you hold it down and you are really having the same issue as me.
Click to expand...
Click to collapse
Be careful about mashing the power button too hard. I already have broke one HD2 because the power button cracked.....

telmedragon said:
Nope, still doesn't work. I'm at a lost for what's wrong right now =\
Click to expand...
Click to collapse
Sorry to hear this. Like I said earlier try using Quick boot. It won't fix your problem but at least your phone will still work. Sorry I couldn't be of more assistance....