Database Users

Big problem with HD2. Need help please.

Hi all, I've a big problem with my HD2. It was working fine for two months, but last week, with the battery very low (2 %) started the problems. I've tried to do almost anything, Hard Reset, install official Roms, custom Roms, (always with MTTY) and still the same.
In short, these are the symptoms:
1 .- Right Button (Power Button) does not work.
2 .- The Action Screen (thas should start by Long pressing the Power button), always starts at the boot.
3 .- I can't switch off the HD2. I can only do it by removing the battery completely, and as soon as I put it in the device, always restarts by itself.
I think it must be something regarding the BIOS (and is not deleted when reflashing the ROM) what is causing this behavior. I don't know if through the registry could be fixed this but it is my hope.
I hope anyone can help me. Thank you very much

Reflash, but, use Task29 or MTTY first. That will complete format your device, so you will get a completely fresh/clean flash.

Im positive that all of this is caused by a stuck power button. Its just pressed all the time, and therefore it cannot be pressed. Hope this helps.

yea I agree it sounds like a faulty button, or maybe circuitry beneath the buttons.

samsamuel said:
yea I agree it sounds like a faulty button, or maybe circuitry beneath the buttons.
Click to expand...
Click to collapse
Thanks for the answers. Probably I should go to the SAT.

[Q] Touchscreen Problem

Alright, so here's my problem. My touchscreen won't response to any finger movement. I could press the hardware buttons like power, volume and talk and it response to that but my problem is mainly trying to get inside my rom. I tried flashing rom via NAND and via clockwork mod and nothing helps. The G Sensor seems to work just fine because it rotates the screen when I'm inside my ROM. I could go back into MAGLDR but I don't think anything there is going to help?
Has anyone else experience anything like this and if so, what did you do to solve it?

had same problem, found a FIX
i have had same problem past couple of days. i was running darkstones SuperRAM_FroYo_V1.5 build with oz 2 cleanex rom. i know that every now and again it would be a pain to unlock the device with the agonising wait for the lock screen to show up but this time the touch screen would not work at all not recognising any movement and not dragging the unlock button across. i would have to take the battery out and restart, even some times touch screen would fail completely when in winmo too, got to a point when 3 days of working then not working and taking the battery out a million times to boot back into android to unlock the device, then touch screen died completely.
FIX- Hard reset
will reset windows mobile. all data on device will be lost.
hold down up-vol key and down-vol key, soft reset button and then power button till it displays formatting screen. follow on screen instructions.
hope this helps.

tidygrant said:
i have had same problem past couple of days. i was running darkstones SuperRAM_FroYo_V1.5 build with oz 2 cleanex rom. i know that every now and again it would be a pain to unlock the device with the agonising wait for the lock screen to show up but this time the touch screen would not work at all not recognising any movement and not dragging the unlock button across. i would have to take the battery out and restart, even some times touch screen would fail completely when in winmo too, got to a point when 3 days of working then not working and taking the battery out a million times to boot back into android to unlock the device, then touch screen died completely.
FIX- Hard reset
will reset windows mobile. all data on device will be lost.
hold down up-vol key and down-vol key, soft reset button and then power button till it displays formatting screen. follow on screen instructions.
hope this helps.
Click to expand...
Click to collapse
well i have woke up this morning to be able to unlock my device to then locking it and not being able to unlock it again!!! i had notification to say it had managed to restore 16 apps whilst i had been asleep so i am thinking there is a dodgy app out there some were

mazdarider23 said:
Alright, so here's my problem. My touchscreen won't response to any finger movement. I could press the hardware buttons like power, volume and talk and it response to that but my problem is mainly trying to get inside my rom. I tried flashing rom via NAND and via clockwork mod and nothing helps. The G Sensor seems to work just fine because it rotates the screen when I'm inside my ROM. I could go back into MAGLDR but I don't think anything there is going to help?
Has anyone else experience anything like this and if so, what did you do to solve it?
Click to expand...
Click to collapse
Sent from my PC36100 using XDA Premium App

I have this problem and have found no way to fix it, I have tried everything except possibly going to the clk loader instead of magldr. when i put the phone to sleep with the power button is when i have the issue of not being able to unlock my phone in Android. I have tried task 29, going back to original windows roms, sd and nandroid, it is a hardware issue related to the digitizer as far as I'm concerned. I love my HD2 and really need to fix or find another one. I know this doesn't help, but maybe a little more insite if nothing else

I had the same issue. With my 1st HD2 it started as an intermittent problem, then eventually completely stopped working. With my replacement it just started to happen again. I immediately flashed back to stock tmo windows and the touchscreen would work so long as I did not try and put the phone on standby or wake the phone using the end key. If the phone went to standby on its own, the touchscreen would not work either. I changed the settings so that the phone would not go into standby at all. I then learned that locking the phone from the windows menu and allowing it to go to standby that way somehow averted the touchscreen problem. After 2 days, the problem seemed to resolve itself, almost completely. If I try and wake it using the end key, the touchscreen still wont work, but every other button on wake works. Also, putting it in standby with the end key seemed to not cause the problem any longer.
I dont know if the issue varies per person, but what worked for me was going to stock windows for a couple of days, then starting over with android. I guess it depends on how far along the problem has progressed.

Look at my thread in my Sig about the Unresponsive Screen Solved. This sounds exactly as that. And there are various workaround solutions through out the post.

[Q] Black Screen...

Hello all. First let me state that I rather not make a thread to ask help on a problem that seems to have happened to a few owners, but my knowledge as to how I could resolve the issue is severely lacking..
At some point today my phone was ringing but the screen would not show. I thought about taking the battery out and turning it back on but there would be no HTC, Bootanimation, anything. It was Just a black-lit screen which responds due to tactile feedback and the four touchkeys light up as usual. At first there was an odd sound that would play after a few minutes so I decided to charge it but again there was nothing. Even tried to access bootloader with -Vol and Power still no screen.
I asked a friend of mine to call my phone to see if it would ring but they said it instantly goes to voicemail as if my phone was off. Note that I WAS SURE IT WAS ON.
Adb seems to work with it as it seems whatever I need to do I have to do it through there.
G2 rooted with gfree method
CM7.1 RC1
Clockwork Recovery
Again i am sorry if I bothered those with posting something others would think is "too common of a problem" as I have no experience in fixing this issue. Plus I would like to try any option available as I would not like to try and have my phone replaced (because of the risk of discovering root and obtaining a G2 with stock gingerbread which is currently not rootable)
Please help..

It sounds like you're suffering from some sort of hardware failure. You need to send your phone in for repair/replacement.

The Unnamed Time Lord said:
Hello all. First let me state that I rather not make a thread to ask help on a problem that seems to have happened to a few owners, but my knowledge as to how I could resolve the issue is severely lacking..
At some point today my phone was ringing but the screen would not show. I thought about taking the battery out and turning it back on but there would be no HTC, Bootanimation, anything. It was Just a black-lit screen which responds due to tactile feedback and the four touchkeys light up as usual. At first there was an odd sound that would play after a few minutes so I decided to charge it but again there was nothing. Even tried to access bootloader with -Vol and Power still no screen.
I asked a friend of mine to call my phone to see if it would ring but they said it instantly goes to voicemail as if my phone was off. Note that I WAS SURE IT WAS ON.
Adb seems to work with it as it seems whatever I need to do I have to do it through there.
G2 rooted with gfree method
CM7.1 RC1
Clockwork Recovery
Again i am sorry if I bothered those with posting something others would think is "too common of a problem" as I have no experience in fixing this issue. Plus I would like to try any option available as I would not like to try and have my phone replaced (because of the risk of discovering root and obtaining a G2 with stock gingerbread which is currently not rootable)
Please help..
Click to expand...
Click to collapse
A. They don't care if its rooted.
B. You can root stock Gingerbread.

Same issue here...
I'm facing the same issue, when i try to unlock the phone (power button or trackpad) the screen lights but stays black, and the buttons are also backlit. I have to lock again with power button and unlock again to get to the actual screen.
It first happened a few days ago, and since i didn't reboot/restart in weeks i tried to reboot but the same issue comes back.
then i shut it down, pulled the battery and then back, and restarted: the phone goes directly to that black backlit screen, i tried several times and tried recovery with no luck, so i thought my phone was messed up although i did have some haptic feedback, well in fact the phone was actually booting, but just not showing anything else than the backlit screen; i waited a minute or so to the booting completes (still shows nothing), then i lock/unlock the screen again and there it is, asking for the pin code.
I tried to go to the recovery again to try to wipe dalvik-cache, i know for sure it goes to recovery, but with a totally black screen, not even backlit this time; the trackpad is too sensitive in the recovery to just blindly navigate in the menu, so it is not useable at all.
Then i had the idea to go to Rom Manager, i reflashed the rom from my sd-card, and enabling wipe dalvik-cache, which worked (all through a black screen). After a few minutes i "felt" it rebooting (vibrating) but still back to that black backlit screen, and i locked/unlocked it again and back it was asking pin code...
I also tried to roll back recovery to 3.0.2.4, since i remember i updated it a few weeks ago, but still the same issue.
I don't know what else to do without accessing the recovery, i wanted to try another kernel, or remove the trackpad wake... is there a way to do it via a script? I guess it's what Rom manager does...
Next step will be a total wipe, but i need to make some room on my sdcard for backup purposes first...
If anyone has an idea to sort this out, i'm highly interested...
I'll try to get a logcat, maybe could give a hint
Edit: Virtuous sense 2.0.0 (used it with no issue since it came out, could it be a hw issue?)
Edit2 : attached logcat

Is the pin screen differant than the usual one ie white number keys? If it is that's the sim lock screen you need to call the carrier to get the code or find out the default. Or just get a new sim lol

nah it's the 4 digit pin code, i didn't lose it btw, it's still working and i can use the phone, but i have a black backlit screen whenever i want to wake the phone, and thus when i receive a phone call, i don't know who it is and i blindly press/swipe the screen to answer, because if i want to use the same trick of locking /unlocking, it doesnt work as the lock button is also used to reject a call...

Maybe rip and reinstall the phone app?

asim0 said:
I'm facing the same issue, when i try to unlock the phone (power button or trackpad) the screen lights but stays black, and the buttons are also backlit. I have to lock again with power button and unlock again to get to the actual screen.
It first happened a few days ago, and since i didn't reboot/restart in weeks i tried to reboot but the same issue comes back.
Click to expand...
Click to collapse
I have the same exact problem as this EXCEPT, it's intermittent. Sometimes when I wake the phone I get an all black but backlight screen, and other times it's fine. I'm on CM7.1.

But a superwipe and reflash will probably fix it. Also don't restore system data on TB

I know i still can use wipe data + cache + dalvik through rom manager, and i always used to superwipe before switching roms, but how can i do that now when the recovery is all blacked out?
can anyone guide me to a script or something i could do while the phone is active, to tell him to reboot to recovery and flash that superwipe?
anyway i'll try the regular wipe and keep the thread updated
---------- Post added at 02:42 PM ---------- Previous post was at 02:35 PM ----------
SuperDave81 said:
EXCEPT, it's intermittent.
Click to expand...
Click to collapse
On my side if i leave the phone locked more than 30 seconds, it happens 100% of the time; also I noticed that now the backlight blinks 2 or 3 times (1 second blinking) when locked, first a few minutes after locking, and then randomly, about 3 or 4 times per hour; I guess it's getting worse;
I've read on another thread that it could be video cable getting loose, but since mine is still under guarantee, i won't open it right now just to check, if i can't fix by wiping / superwiping (when i know how to), i'll use that guarantee, which is one month left (lucky me)
EDIT: one other thing that makes me think it's no hardware, when the black screen appears because of a phone call or a message, the ringtone and notification sound are both half as loud as they should be, this is all really strange

after backing up my data, i reflashed the rom via Rom Manager, and I wiped data and cache (which equals to factory reset) this time: the first screen that should show the pin code numpad was already a black (backlit) screen!!
Also, thinking about it, i realised that the "flash rom from sdcard" menu in Rom Manager is in fact "Flash ZIP from sdcard": the zip doesn't have to be a ROM!!
So I tried flashing a new kernel this way, also some framework modifications (extended settings, removed TP wake, etc...) they all install Ok, but still this black screen...
Also I was about to flash SuperWipeG2.zip this way, but if it doesn't fix my problem, I will be stuck with a blacked out recovery, as SuperWipe wipes everything including /system; so if anyone has an idea to tell Rom Manager to flash two zips (Superwipe then Rom) i'll be willing to try, or a script to do that;
Maybe i'll have a look of the scripts in Superwipe and in the rom, and put both zips together... don't know if it's possible?
Maybe I'll try the Superwipe alone if I can get a spare phone, just in case...
Other thing:I used the phone's gps for more than 5 hours with the screen lit, and it never flickered even once; so it's hard to believe it's a screen connection issue...

Just to keep this updated, everything i did, including superwipe didn't change this issue, so i sent it back to the technical support (under guarantee) and I got it back today; the report that came with it says the screen has been replaced; so it was hardware finally...

Hi, i have same problem.. Black screen in recovery and during the boot. When the system boots, screen is OK. Sometimes i have also blackscreen when I want to use HW keyboard. I tried 4ext, reflash older versions of CW but still the same. I can see a screen through Android Screen Monitor and I can cotrol it. But phone is blak, only backlight. Can somebody say, how to solve this issue?
So, for other, if you cant see screen, you can use Android Screen Monitor for Windows and connect phone through USB and see a screen.

G1ForFun said:
A. They don't care if its rooted.
B. You can root stock Gingerbread.
Click to expand...
Click to collapse
WAIT one minute... they don't care? where was I when this meeting took place?

I had this issue as well on a spare G2 I had.
The screen was just black but you could tell it was lit, hardware keys were lit as well.
The phone was actually my brothers and it rooted w/ CM7.
I ended up selling the phone as is on Ebay but after some research it was a failure in the hardware for the screen and I found extensive instructions on how to replace it that I didn't wish to do.
I never attempted to get it replaced and kind of wish I did now if they don't care about the device being rooted.
I purchased my G2 before he had his, and it's never had the issue so not sure what to think of it.

Saintfyre said:
I ended up selling the phone as is on Ebay but after some research it was a failure in the hardware for the screen and I found extensive instructions on how to replace it that I didn't wish to do.
Click to expand...
Click to collapse
I think I have similar issue, can you post where you found those instructions?
Thanks in advance!

http://www.youtube.com/watch?v=u-dR8CHEGjY&feature=youtube_gdata_player
Sent from my HTC Vision using XDA Premium App

I used the same tutorial to change the LCD but after I put the new its just the backlight but nothing else... I will give it another go maybe and have a look again at those ribbon cables! I guess...
---------- Post added at 10:59 AM ---------- Previous post was at 10:09 AM ----------
I found on ebay: HTC-Desire-Z-T-Mobile-G2-A7272-Slide-Flex-Cable-Ribbon
or I found also with the chassis for a bit more.
Thinking to buy this, it would be great if anyone could confirm that it would help "my condition" ?
THanks in advance!

In terms of cables, yes the flex cables are what you want.
Sent from my T-Mobile G2

Is my touchscreen dieing?

I was running an older Paramid version of dunphp's ROM, and right before swtching the ROM my touch screen start to not function. I could not pull the ring up to unlock the screen. I rebooted multiple times. Cleared Dalvik and fixed permissions. It finally worked after attemptiing to unlock it for what seem like abother 500 times.
I was going to change over to his latest Deisre HD ROM anyway. So I did a Task 29, and cleaned and reinstalled everything from scratch. It worked perfectly for about 5 days. Now I am getting the same issue with my touch screen. It just seems to go out. Is this typically what happens when it's about to die?

Never mind. I Task29, and flashed a Windows Mobile ROM just to see, and yeah...it's dead...

cmajewsk said:
Never mind. I Task29, and flashed a Windows Mobile ROM just to see, and yeah...it's dead...
Click to expand...
Click to collapse
You have semi-dead digitizer. But it is nothing you can't temporarily fix every time it happens. Just push red (end call) button really hard for a while and it will get fixed for a while. I recommend you using button savior and lock screen with it and unlock with any other button than red one, it should be permanently fixed then. Please hit the thanks button if I helped you.

lolkoz said:
You have semi-dead digitizer. But it is nothing you can't temporarily fix every time it happens. Just push red (end call) button really hard for a while and it will get fixed for a while. I recommend you using button savior and lock screen with it and unlock with any other button than red one, it should be permanently fixed then. Please hit the thanks button if I helped you.
Click to expand...
Click to collapse
I hit the thanks button as you gave me hope. I am currently using my old TouchPro 2 with an old NRG Titanium Rom on it for the time being, but will try this today. I’ll install “button savior”, but what am I supposed to do with the app? What settings do I run? I think you are totally right about this, as I noticed when I was unlocking my phone, using the green call button worked most often, but now that’s not even working.

cmajewsk said:
I hit the thanks button as you gave me hope. I am currently using my old TouchPro 2 with an old NRG Titanium Rom on it for the time being, but will try this today. I’ll install “button savior”, but what am I supposed to do with the app? What settings do I run? I think you are totally right about this, as I noticed when I was unlocking my phone, using the green call button worked most often, but now that’s not even working.
Click to expand...
Click to collapse
Yes, I have exactly the same problem as you have. My phone was working flawlessly for like a year and a half, but last week all of a sudden the touchscreen sometimes didn't work and sometimes it did. So I tried literally everything, I was fixing my permisions all the time, wiping dalvik, task29, remaking parrtitions, even bought a new sd card. But few days ago I found a solution, by pushing red button really hard (because the digitizer is right behind it) and not using it after. The Button Savior app is a simple app that makes a very little transparent icon on your screen and when you tap it, the menu of buttons will come up (with the same buttons as your hard buttons on your device) so every time you will want to lock the device you will do it on your screen, and won't have to push the hard button and come through all the hassle of pushing the digitizer. I really hope I helped you, as this very same problem was driving my crazy for the past few days.

lolkoz said:
Yes, I have exactly the same problem as you have. My phone was working flawlessly for like a year and a half, but last week all of a sudden the touchscreen sometimes didn't work and sometimes it did. So I tried literally everything, I was fixing my permisions all the time, wiping dalvik, task29, remaking parrtitions, even bought a new sd card. But few days ago I found a solution, by pushing red button really hard (because the digitizer is right behind it) and not using it after. The Button Savior app is a simple app that makes a very little transparent icon on your screen and when you tap it, the menu of buttons will come up (with the same buttons as your hard buttons on your device) so every time you will want to lock the device you will do it on your screen, and won't have to push the hard button and come through all the hassle of pushing the digitizer. I really hope I helped you, as this very same problem was driving my crazy for the past few days.
Click to expand...
Click to collapse
Nah, that didn't work...my digitizer must be completely dead. I held the Red Button for a while and holding it down really hard...made no difference..oh well guess a dumb phone until the Prime comes out....thanks anyway.

cmajewsk said:
Nah, that didn't work...my digitizer must be completely dead. I held the Red Button for a while and holding it down really hard...made no difference..oh well guess a dumb phone until the Prime comes out....thanks anyway.
Click to expand...
Click to collapse
Aww, that's a shame. I really tought it would help. It doesn't work every time, maybe you can try it few more times. If it's not even then going to work, then maybe you should get your digitizer replaced.
Cheers

lolkoz said:
Aww, that's a shame. I really tought it would help. It doesn't work every time, maybe you can try it few more times. If it's not even then going to work, then maybe you should get your digitizer replaced.
Cheers
Click to expand...
Click to collapse
How long do you hold the red button? Also, I am pushing down really hard. I didn't know you could get the digitizer replaced...I wonder who would do that (no way would I send it to HTC and wait a month), and how much that costs...?

HTC sends phones back crazy quick. Atleast that's how it was for me. They actually sent it back the day they got it from what I remember. It did take a while though for the phone to arrive to HTC (this depend who and from where you send it though) If your phone still has warranty I seriously recommended you send it yo HTC. Just remember to flash it 100% stock before sending it.
Sent from my HD2 using XDA App

Well believe it or not, after pressing the Red phone off button for an eternity and applying a ton of pressure, it's working. I am sure it won't be for long. I have a shortcut to lock the phone on the screen. So basically your saying I should stay away from hitting the Red phone off button, or else that will kill it again? What about the other hard buttons?
I am in the UAE at present, so it might be better for me to just order a digitizer and do the repair myself. I see there are a lot of YouTube videos on the subject.
Thanks everyone for your help!

Home button

Anyone replaced home button (fingerprint scanner)... My button is dead and in ebay you can order one for 9.99$ ...

lummujaj said:
Anyone replaced home button (fingerprint scanner)... My button is dead and in ebay you can order one for 9.99$ ...
Click to expand...
Click to collapse
Are you sure that the button is actually dead? I've read of a lot of people having the issue whereby the home button stops responding, and I've actually had it happen on my OPT twice myself and it's not been the hardware...
Two quick things to try (if you haven't already)
1) Try a force reboot of your phone (fixed my issue the first time it happened to me) - by this I mean press and hold the power button for ages, until the phone eventually just powers off immediately (without going through the shutdown process) and then power the phone back on.
2) Not sure if you have rooted your phone, or have a custom recovery (TRWP) but if so try wiping the Cache (not the Dalvic / Art Cache, but the other Cache) and reboot (fixed my issue the second time it happened to me).
Hope this helps.

lummujaj said:
Anyone replaced home button (fingerprint scanner)... My button is dead and in ebay you can order one for 9.99$ ...
Click to expand...
Click to collapse
If you have followed all the software solutions, still under warranty then RMA.
I faced this issue once, fixed it pushing around the sensor with my finger nail I did push really hard until it change to home screen it was 6 or 8 week's ago, haven't failed since
Sent from my ONE A2005 using Tapatalk

juststarted said:
Are you sure that the button is actually dead? I've read of a lot of people having the issue whereby the home button stops responding, and I've actually had it happen on my OPT twice myself and it's not been the hardware...
Two quick things to try (if you haven't already)
1) Try a force reboot of your phone (fixed my issue the first time it happened to me) - by this I mean press and hold the power button for ages, until the phone eventually just powers off immediately (without going through the shutdown process) and then power the phone back on.
2) Not sure if you have rooted your phone, or have a custom recovery (TRWP) but if so try wiping the Cache (not the Dalvic / Art Cache, but the other Cache) and reboot (fixed my issue the second time it happened to me).
Hope this helps.
Click to expand...
Click to collapse
None of above have worked for me. I've a rooted A2005 running unofficial CM 13. A couple of days back it just stopped working. I thought it's a bug in the ROM. Changing and clean flashing the ROMs didn't fix the issue. Then I realized it's something serious as I remembered that it may have got some moisture when it was inside the chest pocket of my shirt and I got sweat due to some physical hardwork. I'm still not sure though as to what caused the problem.
I would really appreciate if somebody comes up with a solution. Yes, pressing hard the home button has not worked for me either.

MusadiqManas said:
None of above have worked for me. I've a rooted A2005 running unofficial CM 13. A couple of days back it just stopped working. I thought it's a bug in the ROM. Changing and clean flashing the ROMs didn't fix the issue. Then I realized it's something serious as I remembered that it may have got some moisture when it was inside the chest pocket of my shirt and I got sweat due to some physical hardwork. I'm still not sure though as to what caused the problem.
I would really appreciate if somebody comes up with a solution. Yes, pressing hard the home button has not worked for me either.
Click to expand...
Click to collapse
could really be the moisture like u said.
heard the home button is very sensitive to that.

Mine got broken from moisture too ... I created a thread in oneplus two forum also.. A guy there posted and flamed me for not searching forum bcouse there is a sulution to fix homebutton from moisture broken