Hi everybody !
First af all, sry for bad english ! i will try to do my best but i'm french so this could explain some mistakes.
Does anybody experienced the same trouble ?
1/ my 4 buttons ( contact, calendar, camera and record ) always reset ! maybe 1 or 2 times a day.
I always have to go in the configuration panel to re-set the standard function and i can't have anymore access to the "record" button.
If i do -) start -) parameters -) buttons i always have to redeploy the affectation af each button by choosing in the list above BUT in this list i can't have access to the 'hotvoice' or if u prefer the 'record' application !
so i can't program the record button again to record !
am i clear enought ?
2/ when my 4 buttons reset i have a message on the screen (will try to translate ) "can't find the shortcut or pb with the shortcut / can't access to the required function "
Can anybody help ?
Qtek2020 or XDA2
SFR
Calendar+ today plug in
Scott Seligman's Launcher
FV&&PB Metro
that's all
Tks 4 all
Eric
Hi everybody
26 read and no response.
So i'm the only to have this pb OK well u can feel u all happy.
Sry for bothering u so !
Nice end of day 2 u all
Eric
never had that issue maybe because i leave the buttons at default
apart from the calander button which is set to voice command
and that dont get kicked back to default calander when i reset
Hi every one.
So i set "button lock" and also disable mainly all notifications but every time a new sms arrives,the screen goes on.I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
I been checking every thing i could check but i can´t find the answer about this problem.
Thanks in advance.
Third party software Pocket Zen Phone or phoneAlarm.
Ok i´ll check it and see what i can do.
Cheers mate.
User22 said:
I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
Click to expand...
Click to collapse
There are many occasions the Magician turns on its screen. Rather than trying to find and disable all these, I copied TPDisable.exe and TPEnable.exe from the original Extended ROM into my Program Files folder, and then assigned them to a hardware key (using Hotbutton, so that I can use the same key for both).
As the name implies, TPDisable disables the touchscreen (not the display!), and TPEnable re-enables it. So, before I put my Magician into my pocket, I now disable the touchscreen (one press of a button). That still leaves the keys active, true, but I found that normally the touchscreen is much more likely to be the culprit when strange things happen on your Magician while it's in the pocket, and turned itself on.
Cheers
Daniel
@ tadzio
Well,that is a very interesting solution,but i can´t find TPDisable.exe
or TPEnable.exe inside my magician.I need a bit more info from you
Daniel.
Thanks a lot for your replies.
What happens if you hold down power button for 2 seconds to switch off backlight? Does the light still illuminate on receipt of sms?
@ cruisin-thru
I can´t see the point of your question,mainly because the thing i am looking for is to "switch off" my Qtek like a normal mobile phone,i mince buttons locks and screen off when a new sms or incoming call arrives and when you push power button for example,then screen go on and also release the lock of the buttons.
Any one can say that then i can use deltalock.I did it but the battery live is going down very quick.
Screenlock is not working properly also,i will say that Deltalock is 95% a lot better than Screenlock.
And finally,why microsoft is developing this OS without fully screen off selectable option???. Who knows!!!
Cheers
User22 said:
Well,that is a very interesting solution,but i can´t find TPDisable.exe or TPEnable.exe inside my magician.I need a bit more info from you Daniel.
Click to expand...
Click to collapse
Both programs are in the Extended ROM. Most users have made this visible (though not writable) by performing a Hard Reset, and immediately after completing the initial screen adjustment and mini-tutorial and before the device starts installing programs, a Soft Reset.
If you do not want to do a Hard Reset, search this site's FTP server for Magician Extended ROM downloads. There were a few there last time I looked.
Cheers
Daniel
Well,after config hotbutton to TPDisable and TPEnable i can´t enable the screen and hardware buttons.
TPDisable is disablind the screen but also all the hardware buttons ( with and without button lock at settins),even the power button.
I use same hardware button for TPDisable and TPEnable ,is that correct or i am doing silly things?
If I arrive an sms the screen is switching on and after a few seconds switching off again if I don't press any key or tap the screen!
It's a changeable registry key:
HKEY_LOCAL_MACHINE / System / CurrentControlSet / Control / Power /
WakeupPowerOff =12 (the default is 180)
DisableGwesPowerOff=0 (the default is 1)
If you switch on the Jam (power button) need to press some other key too, because it switches off after 12 seconds!!!
by Avers
@avers
Well that is another solution but i insist that there should be an easiest way to keep the screen fully off when a new sms or what ever arrives,including hardware buttons off ofcourse.
Any suggestion more?, perhaps at the end and betwen all of us ,we can find the solution.
Cheers.
I think the best solution is third party software like PHONEALARM,
it's easiest way to get main tweaks of Pocket Windows.
get it there
http://www.pocketmax.net/phoneAlarm.htm
Well my friends,pocketzenphone is not doing what i am looking for.
Next step is to try phonealarm,but probably will work the same way as pocketzenphone,leting the screen to go on every time a new sms arrives.
Sorry for my languaje but F... microsoft and F... devil gates.
As you can read on this post ,phonealarm IS NOT doing it.
http://www.pocketmax.net/phpbb2/viewtopic.php?t=429
phonealarm has option named "Don't activate backlight on alarm"
ALARM there means any event, that needs notification.
now i am understanding, that it is some differ that you need.
also i advice you make some registry tweaks to make a very short backlite time when sms arrives.:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\WakeupPowerOff = 10
this timeout in seconds. is used when our device self power on, when SMS arrives or we push the POWER button and do nothing anymore
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\DisableGwesPowerOff = 0
this key is enables this power control system (necessarily change it, or first key will not work)
after the editing registry you need to reboot PDA.
sorry for poor english, i translate text from russian.
if you want to use online translator i can give you original URL
_http://forum.ladoshki.com/viewtopic.php?t=16012
Thank you for your reply i will try like you and others point out and also will keep looking for that utopic soft.
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
bnycastro said:
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
Click to expand...
Click to collapse
If you read one of my post ,you will see that i allready said that Deltalock is working but it is KILLING the battery live very fast and when i say VERY FAST it mince that you will get almost 6hours against the normal live (more than 15hours).
Cheers mate.
I think if you keep your ppc on all the time you will get this battery life. Anyway I think deltaLock is for keeping your PPC on and having screen and button lock, not having it in suspend mode and not allowing the screen to power up. Sorry about that, seem to have misunderstood your post.
Don´t worry mate, at the end we are all together trying to find a solution to this microsoft silly programing, any comment and any new idea is wellcome.
Cheers.
Has anyone managed to disable the voicedial button on their M500. Every now and then I hear this woman in my pocket saying "do you want to dial........" I keep getting the mick taken as I'm shouting at my phone "goodbye goodbye quit goodbye" before it closes.
I tried going into Start > Settings > Personal > Buttons and changing Button 4 to <none> and have also tried setting to Tasks or MortSaver without success.
Any help would be much appreciated.
I feel for ya bro! I have the exact same problem, hope someone will come save us, cause my throat is getting hoarse of shouting at my phone to friggin' quit!
Same LOOOOOOOOOOL
Can't reload old button, I try regedit, but nothin...
u can have the program completely uninstalled.. but it will cost u a hard reset!!!
there was a hack to not install the orange software on the device- u just soft reset b4 the orange software installs, after u have tapped the screen 4 times!!
and then from the extended rom u can just choose whether 2 install the voicedial..
What i did on my M500, hacked the registry and changed the path to the voicedail.exe. Try searching for "voicedail.exe" in the reg. with some reg. tools. You'll find one string in an OEM subdir with the path to voicedail.exe. Empty this value. Save and exit.
Prob softreset
Press the button and hey, it doesn't do **** . I know this isn't the cleanest way but it sure does beat an hard reset! I've set button 4 to the program Deltralock so I can lock the device with one press of an hardware button without WMP/Betaplayer crapping out. Cheers!
MMaster23 said:
What i did on my M500, hacked the registry and changed the path to the voicedail.exe. Try searching for "voicedail.exe" in the reg. with some reg. tools. You'll find one string in an OEM subdir with the path to voicedail.exe. Empty this value. Save and exit.
Prob softreset
Press the button and hey, it doesn't do **** . I know this isn't the cleanest way but it sure does beat an hard reset! I've set button 4 to the program Deltralock so I can lock the device with one press of an hardware button without WMP/Betaplayer crapping out. Cheers!
Click to expand...
Click to collapse
So easy, thx
Hello,
is there a way to re-assign the phone hardware buttons to a new function ?
I don't use my universal as a phone and I would like to use the hardware phone buttons for some other functions ...
Thanks a lot !
yes it is possible
dizzy33 said:
Hello,
is there a way to re-assign the phone hardware buttons to a new function ?
I don't use my universal as a phone and I would like to use the hardware phone buttons for some other functions ...
Thanks a lot !
Click to expand...
Click to collapse
yes it is possible!
use PQz:
http://www.nicque.com/PQz/PQzII.htm
Thanks a lot ! it helped me a lot, but I regret that the icon of this application is static on the top menu bar. So I removed the icon from the top menu bar (using the software setup) but there is no way for me to access again the setup except if I remove the software from the registry and re-install it again.
Also, it doesn't make the phone buttons configurable for other applications like games (wich was done, for exemple, by the hack for the re-assignement of the backlight button).
On the other side, this software allows me to launch any software (wich is very good) using the phone buttons, and the size of it is only 180k. And for this size, there are many other functions possible.
So thanks again !
if you have installed pqz by cab you'll find in an program files subdirectory a program called PQzII_Setup.exe if you run this you are enabled to reconfigure it. if you have installed it using a zip file you'll find this file in the samefolder as the PQzII.exe.
I'm gonna try this, thanks again !!!
Hello,
i have some problem here.
I have windows mobile 6.5.3 (or 6.5.2? Don't know where to find out) and my button "áü" (next to space) isn't working. It's software error (i'we tried it in service menu). Have you any idea where i could find solution please?
Then i have also problem with camera button: first stage isn't working too, and this is REAL problem
When i'we tried service menu > keyboard, it wasn't working too (i mean just first stage of button, i can do photo but i cant focus) and above output area there was written "Power/Camera/Panel keys not supported" ...
Do you think that hard reset would help me?
Thanks a lot and sorry for my english.
Filcuk
to access the symbols u need to presss other button 1st
example: ë ... u need to press e 1st and than the button next to space
I was using it for a week, then it stopped working.
try installing this
http://www.filehosting.org/file/details/217377/SymSelectorSetup.CAB