Related
Hi every one.
So i set "button lock" and also disable mainly all notifications but every time a new sms arrives,the screen goes on.I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
I been checking every thing i could check but i can´t find the answer about this problem.
Thanks in advance.
Third party software Pocket Zen Phone or phoneAlarm.
Ok i´ll check it and see what i can do.
Cheers mate.
User22 said:
I will like to keep the screen off because if you carry your magician in your pocket and after that sms arrives,you can accidentaly press any button or even touch the screen.
Click to expand...
Click to collapse
There are many occasions the Magician turns on its screen. Rather than trying to find and disable all these, I copied TPDisable.exe and TPEnable.exe from the original Extended ROM into my Program Files folder, and then assigned them to a hardware key (using Hotbutton, so that I can use the same key for both).
As the name implies, TPDisable disables the touchscreen (not the display!), and TPEnable re-enables it. So, before I put my Magician into my pocket, I now disable the touchscreen (one press of a button). That still leaves the keys active, true, but I found that normally the touchscreen is much more likely to be the culprit when strange things happen on your Magician while it's in the pocket, and turned itself on.
Cheers
Daniel
@ tadzio
Well,that is a very interesting solution,but i can´t find TPDisable.exe
or TPEnable.exe inside my magician.I need a bit more info from you
Daniel.
Thanks a lot for your replies.
What happens if you hold down power button for 2 seconds to switch off backlight? Does the light still illuminate on receipt of sms?
@ cruisin-thru
I can´t see the point of your question,mainly because the thing i am looking for is to "switch off" my Qtek like a normal mobile phone,i mince buttons locks and screen off when a new sms or incoming call arrives and when you push power button for example,then screen go on and also release the lock of the buttons.
Any one can say that then i can use deltalock.I did it but the battery live is going down very quick.
Screenlock is not working properly also,i will say that Deltalock is 95% a lot better than Screenlock.
And finally,why microsoft is developing this OS without fully screen off selectable option???. Who knows!!!
Cheers
User22 said:
Well,that is a very interesting solution,but i can´t find TPDisable.exe or TPEnable.exe inside my magician.I need a bit more info from you Daniel.
Click to expand...
Click to collapse
Both programs are in the Extended ROM. Most users have made this visible (though not writable) by performing a Hard Reset, and immediately after completing the initial screen adjustment and mini-tutorial and before the device starts installing programs, a Soft Reset.
If you do not want to do a Hard Reset, search this site's FTP server for Magician Extended ROM downloads. There were a few there last time I looked.
Cheers
Daniel
Well,after config hotbutton to TPDisable and TPEnable i can´t enable the screen and hardware buttons.
TPDisable is disablind the screen but also all the hardware buttons ( with and without button lock at settins),even the power button.
I use same hardware button for TPDisable and TPEnable ,is that correct or i am doing silly things?
If I arrive an sms the screen is switching on and after a few seconds switching off again if I don't press any key or tap the screen!
It's a changeable registry key:
HKEY_LOCAL_MACHINE / System / CurrentControlSet / Control / Power /
WakeupPowerOff =12 (the default is 180)
DisableGwesPowerOff=0 (the default is 1)
If you switch on the Jam (power button) need to press some other key too, because it switches off after 12 seconds!!!
by Avers
@avers
Well that is another solution but i insist that there should be an easiest way to keep the screen fully off when a new sms or what ever arrives,including hardware buttons off ofcourse.
Any suggestion more?, perhaps at the end and betwen all of us ,we can find the solution.
Cheers.
I think the best solution is third party software like PHONEALARM,
it's easiest way to get main tweaks of Pocket Windows.
get it there
http://www.pocketmax.net/phoneAlarm.htm
Well my friends,pocketzenphone is not doing what i am looking for.
Next step is to try phonealarm,but probably will work the same way as pocketzenphone,leting the screen to go on every time a new sms arrives.
Sorry for my languaje but F... microsoft and F... devil gates.
As you can read on this post ,phonealarm IS NOT doing it.
http://www.pocketmax.net/phpbb2/viewtopic.php?t=429
phonealarm has option named "Don't activate backlight on alarm"
ALARM there means any event, that needs notification.
now i am understanding, that it is some differ that you need.
also i advice you make some registry tweaks to make a very short backlite time when sms arrives.:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\WakeupPowerOff = 10
this timeout in seconds. is used when our device self power on, when SMS arrives or we push the POWER button and do nothing anymore
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\DisableGwesPowerOff = 0
this key is enables this power control system (necessarily change it, or first key will not work)
after the editing registry you need to reboot PDA.
sorry for poor english, i translate text from russian.
if you want to use online translator i can give you original URL
_http://forum.ladoshki.com/viewtopic.php?t=16012
Thank you for your reply i will try like you and others point out and also will keep looking for that utopic soft.
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
bnycastro said:
deltaLock locks the screen and buttons even if you get sms or calls. I use it on my JAM and it works so far.
Click to expand...
Click to collapse
If you read one of my post ,you will see that i allready said that Deltalock is working but it is KILLING the battery live very fast and when i say VERY FAST it mince that you will get almost 6hours against the normal live (more than 15hours).
Cheers mate.
I think if you keep your ppc on all the time you will get this battery life. Anyway I think deltaLock is for keeping your PPC on and having screen and button lock, not having it in suspend mode and not allowing the screen to power up. Sorry about that, seem to have misunderstood your post.
Don´t worry mate, at the end we are all together trying to find a solution to this microsoft silly programing, any comment and any new idea is wellcome.
Cheers.
I'm sure i saw a thread with this on, i cant find it for the life of me though..
Can anyone assist ?
Here it is:
http://wiki.howardforums.com/pocketpc/index.php/Remap_Left_Today_Screen_Softkey_(Calendar)_(WM5.0)
Or here
http://forum.xda-developers.com/viewtopic.php?t=33242
Thanks guys
EDIT - however, when i make the change using PHM Regedit.. it changes the label of the soft key but not the functionality.
...and after a soft reboot it changes the label back too :S
Any ideas?
just tried it, it's great!
don't do a soft reset, switch the phone off with the power button.
some reg changes only work on a re-start.
also changed right key as well
thanks for sharing
aliendad said:
don't do a soft reset, switch the phone off with the power button.
Click to expand...
Click to collapse
Disco!
That's the ticket. Thanks all
Dont for get if your using a Vario it has an option in the control pannel...
Terran
Thats correct, but you can't point that to specific exe's though. There's only a list of apps to choose from.
gazzrenn said:
Thats correct, but you can't point that to specific exe's though. There's only a list of apps to choose from.
Click to expand...
Click to collapse
True...
Terran
i have used the "lnk" for tomtom & tcpmp by putting the full path "windows\start menu\\programs\tcpmp.lnk"
and they both work fine
going to be a pain when i do my next soft-reset
Has anyone figured out how to remap the volume slider on the Wizard?
I hardly ever want to change volume, just turn on/off vibrate mode which is a single keypress anyway, but i would really like it to be an up/down control like my old Dell Axim.
I know it functions like this in IE full screen mode, but I really want it for everything (especially MS Reader).
I think a lot of people would like this. It allows a better grip on the phone whilst moving within the app you're using (eg: MS Reader).
Any guru's got an idea about this one?
Joe
Remapping
Absolutely neccessary thing to fix (volume slider)!
And as using double-language hard-keyboard layout I am in desperate need to remap the change-layout sequence.
What about remapping in this OS, is it possible to do something?
Someone did this on the Magician (found it in that group on here at the time), I remember finding it very useful!
If someone could do a Wizard version that would be great!
Solution Found
Here is how you do it (and it was on the Magician forums, thx for the tip :wink: ):
Install the program found at the URL below, or from the attachment as you wish.
When you get the setup screen, choose "Do not handle" for all except the volume slider, which is set to up/down.
Ok it, and there you go, slider is now up/down and works in MS Reader, Today screen, and general folder browsing.
It says on the site not to put it on any device not listed as compatible, which doesn't include the Wizard, but "He who dares, wins..."
I am well chuffed with it. Now I am all ready for my commute on Monday.
http://ae.inc.ru/download/AEBPlus.zip
Joe
Unless this is a new version. DO NOT USE AEB+ WITH A WIZARD
I tried AEbuttons plus awhile ago and It deleted a couple of my buttons. I dont think it is meant for a device with as many buttons as the wizard. I had to go in and manually create the buttons again. I told it to handle all buttons though. Maybe telling it to only handle the volume slider doesn't cause this problem. I won't try it again until they actually say the wizard is compatible.
I just checked all buttons having read your post.
The only casualty is the connection manager button, which now only switches from audio vol. on to vibrate ringers when held down, and I have an icon on the today screen to go there anyway.
I can live with that
BUT BEWARE: No comms manager button = no hard reset = what do you do when you need to hard reset?
guttrhead said:
Unless this is a new version. DO NOT USE AEB+ WITH A WIZARD
I tried AEbuttons plus awhile ago and It deleted a couple of my buttons. I dont think it is meant for a device with as many buttons as the wizard. I had to go in and manually create the buttons again. I told it to handle all buttons though. Maybe telling it to only handle the volume slider doesn't cause this problem. I won't try it again until they actually say the wizard is compatible.
Click to expand...
Click to collapse
How did you restore the buttons?
Never mind:
http://forum.xda-developers.com/viewtopic.php?t=33795
joebongo said:
The only casualty is the connection manager button
.....
BUT BEWARE: No comms manager button = no hard reset = what do you do when you need to hard reset?
Click to expand...
Click to collapse
I just checked if it is possible to restore the connection manager button after installing AE Button Plus, and it seems to work
Just add these registry keys after you have installed the software and you have all your buttons back and an up down slider:
Code:
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys\40C6]
"Flags"=dword:00000000
"ResetCmd"="\"\\Windows\\AppButtons\\Comm Manager.lnk\""
"Icon"="\\windows\\CommManager.exe, 0"
"Name"="Button 5"
@="\"\\Windows\\AppButtons\\Comm Manager.lnk\""
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Keys\40C5]
"Flags"=dword:00000000
"ResetCmd"="\"\\Windows\\AppButtons\\Record.lnk\" -b"
"Icon"="\\windows\\HotVoice.exe, 0"
"Name"="Button 4(Hold)"
@="\"\\Windows\\AppButtons\\Record.lnk\" -b"
You can put this in a .reg file and open it on your Wizard to import into the registry
I don't think Windows minds the button to be remapped for a hard reset, the hard reset will probably still work if the button is remapped by software.
Did you figure out which reg entries are actually changed when the slider is remapped by AEB? If we can figure this out, we could create a file to do this without the need to recreate.
I am also getting slowdowns/crashed on syncing via USB, and am beginning to wonder if this is another AEB effect.
Joe
joebongo said:
Did you figure out which reg entries are actually changed when the slider is remapped by AEB? If we can figure this out, we could create a file to do this without the need to recreate.
I am also getting slowdowns/crashed on syncing via USB, and am beginning to wonder if this is another AEB effect.
Joe
Click to expand...
Click to collapse
I can't find any slider registry entries, but I have no idea where to look
I have noticed that once I close the AEB program my slider doesn't do anything anymore, so it might be possible that it is not just a registry entry
faysel, over at the modaco forum has come up with this awesome cab that lets you get vibrating feedback everytime you press one of the number buttons in the phone. The vibration lasts as long (or as short!) as you press the button.
Great cab, very useful for knowing whether you have indeed pressed the key.
This is great, thank you. I used to use Redial with vibrating effect on my PDA2k (WM2003SE) but this is even better
don't expect a long battery life with that! :wink:
acer175 said:
don't expect a long battery life with that! :wink:
Click to expand...
Click to collapse
Are you kidding me? I mean what kind of a battery effect you think it will have? Its such a small vibe that I don't expect to have ANY noticable effect on battery life. First it vibes only when you dial phone numbers (how many a day? 5? 6? even 20? Its still nothing. Second, receiving a phone call, that is the vibration during it, probably uses more power than this addition will use in 20 calls...
I really disagree... :wink:
This is a great little program!
I don't like it because if you tap fast, it wont vibrate. In addition to this, there is a serious problem with the dialer after you uninstall it.
So I had to reinstall it and now i'm stuck with it
My rating : 0 (ZERO)
@Andrew_sh: use the attached cab to get the keytones back, then uncheck from the sounds and notifications settings to get a working silent dialer back.
@Koksie
Thanks for trying but unfortunately it won't fix it.
When I press the button , the tone will sound but if I press it again shortly after, it lags and makes a higher pitched tone.
Sorry to hear it didn't work Andrew, I have no idea how to fix this. I use the vibrate and am happy with it, on my Magician going back with this cab worked fine, I have no idea what is causing this in your Prophet. I hope you can figure it out and correct it, good luck with that.
andrew_sh said:
@Koksie
Thanks for trying but unfortunately it won't fix it.
When I press the button , the tone will sound but if I press it again shortly after, it lags and makes a higher pitched tone.
Click to expand...
Click to collapse
Try this, it's a saved registry string of the original keys that the .cab modified. Hopefully i'll work for you without messing up anything else.
I had to rename the file vibrate off.reg.exe to ba able to attach it. Just delete the .exe part ie. vibrate off.reg
this is a technical forum
can someone paste here the registry keys which are being modified by this vibrate utility?
thanks
Using a registry editor navigate to the following keys and follow the directions. Do this for each of the listed registy keys
1. Rename Standard DWORD parameter "Sound" to "Sound1"
2. Create new String Parameter "Sound"
3. Assign value *vibrate* to this new parameter.
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf#
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf*
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf0
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf1
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf2
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf3
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf4
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf5
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf6
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf7
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf8
HKEY_CURRENT_USER\ControlPanel\Sounds\Dtmf9
this mod doesn't work fine for me, I noticed the vibrate a few time but it's not working everytime I tap on the Keypad...
Strange :?
Although the mod works fine, I had big troubles removing it again.
After removing the mod with the supplied cab file any keys pressed in the dialer would lag and emmit a short beep.
i finally succeeded in removing it manually:
First reinstall the vibrate mod again so that the keys vibrated again when pressed.
Then go into the registery keys posted above, deleted the parameter "Sound" and then rename the parameter "Sound1" back to "Sound".
Do this for all Dtmf keys.
Thats all
its true if you tap fast it wont vibrate at all.. very annoying. is there a way to make it vibrate for a set lenght.. much like the dtmf tones used to be.. no matter how long or short i press..
that would be very useful.
regards,
tom
bk227865 said:
Although the mod works fine, I had big troubles removing it again.
After removing the mod with the supplied cab file any keys pressed in the dialer would lag and emmit a short beep.
i finally succeeded in removing it manually:
First reinstall the vibrate mod again so that the keys vibrated again when pressed.
Then go into the registery keys posted above, deleted the parameter "Sound" and then rename the parameter "Sound1" back to "Sound".
Do this for all Dtmf keys.
Thats all
Click to expand...
Click to collapse
I used this mod until I found out that I couldn't turn off vibrate on incoming calls anymore. I can't be sure that they are related, but the timing was right. The next time I did a ROM upgrade I didn't install it again. I use speed dial with Photo Contacts Pro anyway.
krale said:
faysel, over at the modaco forum has come up with this awesome cab that lets you get vibrating feedback everytime you press one of the number buttons in the phone. The vibration lasts as long (or as short!) as you press the button.
Great cab, very useful for knowing whether you have indeed pressed the key.
Click to expand...
Click to collapse
Never mind - problem fixed
Not installing on Tytn / Black2.5
"Installation unsuccesfull, Not meant for this device"
Did anybody have more luck? How?
I don't like this
...the vibrate just doesn't trigger some of the time, which means you can't rely on tactile feedback on dialling, which makes it fairly useless. Sorry...
buhahahaha
*buzz* *buzz* *buzz*
works fine on my Jamin. Great app
If anyone can help me. I would thank you 1million times. Ive searched and searched and searched and couldnt find the answer. Heres the problem:
When i hit buttons on the slideout keyboard, the letters come out wrong.
For example
When I press "i" it shows ".i"
When I press "q" it shows "zq"
When I press "e" it shows "ce"
When I press "g" it shows "lg"
When I press "l" it shows "lg"
When I press "z" it shows "zq"
When I press "c" it shows "ce"
Pleaseee help me!. Ive tried everything. Im using ROM 2.17, it had the same problem even with the original ROM.
did you check your registry yet? Go to
\HKCU(HK Current User)\ControlPanel\Keybd
And see if you have a key named "Locale". If you do what number does is have. For english keyboard it should be 0809. if you don´t see anything in that folder calles locale create a new String named "Locale" and set the value to 0809. then power your device down with the off button and switch it back on again. If that didn´t help.i have no idea.
i have the key "locale" already set with hex 0809. I guess thats not it. Im still trying to fix this thing. i really wished i knew what caused this to happen. it sucks not being able to use the slide out keyboard.
has it been like this from the beginning or when did it start?
try changing it to let´s say german settings and see if it still happens. change the value to 0407. you can always chang it back.
that didnt work either. I cant remember exactly when it happened. Im pretty sure I didnt buy it like this. Even after the ROM upgrade they keyboard problem still exists..
Would you or anyone else give me the settings from their HTC Wizard phone at HKCU/Control panel/Keybd ?
Mine look like this:
DefaultKeyLock 1 (0X000001)
EnableIndicator 1 (0x000001)
InitialDelay 375 (0x000177)
Locale 0407 (was just changed, but i will change it back)
MuteSwitch 1 (0x000001)
repeatrate 8 (0x000008)
ShowWangingMsg 1 (0x000001)
the settings are the same as in my registry. did you do a hard reset bevore you flashed the new rom on your device. that should have reset your regestry also. and if that was the case then i don´t believe that it´s a registry problem. Do you have any thirdparty software on that might conflict with the keyboard? maybe some SIP program or something?
just to make suer. check under
HKLM\Hardware\Devicemap\Keybd
CalVKey 0
ContLessVKey 0
ContMoreVKey 0
DriverName keybddr.dll
TaskmanVKey 35
just wondering what you have there.
hmm... If i do a hard reset now, would could go wrong? Do i lose any settings? does it revert back to factory defaults?
How do you do a hard reset anyway?
Do you think I should try that ?
This is whats listed in "Remove Programs" under system settings:
PC Counselor Tweaks2k2.NET
XDA Developers Registry Wizard
PHM Registry Editor
Zoki A2DP
Cingular Get Xpress Mail
FdcSoft PPCContactsMgr
ammar Wireless Today Plugin
yes a hard reset delets everything of your phone and then reinstalls the rom. so you loose any data that you have on your phone and it puts all settings back to factory default. and you have to install everything from scratch.
for a hard reset you need to hold the comm and voic dial button on the sides of the phone pressed and push the reset button with your stylus.
But that should only be the last option.
I dont have anything stored on memory anyway. I keep everything on my storage card. So losing everything is not a problem. I even have the pim file stored on my memory card that holds all my contacts info.
So by doing this, it will revert back to original ROM?
Wheres the reset button on the phone? How can u press it with the stylus?
yes it will clear your storage on the phone and then install the rom you have on there from scratch.
the reset button is the small hole under the IR on the left side of your device. be sure to sync before you do a hard reset to have your contact/calender/mails all backed up. If you have any reg tweaks made you will have to change those again after the hard reset because they will also be back to default.
Hey, sorry to bug you still but when i press the 2 buttons on the side (comm and voice), a recoding window pops up then when i press the reset button, it does reset, but it comes back up, nothing got erased.....
yeah it´s a bit tricky. try turning the phone off first. then when it´s off press and hold the two buttons and press reset. make sure you hold the comm and voic dial button until you get a grey screen which askes you to press send to format. Send is the green phone button.
OK, its formatting right now. I will let you know how it goes.
I had to turn it off, turn it back on. As soon as i turned it on, before it even loads up, I had to press both buttons and hold down the reset button. You're right, was a bit tricky.
Well, I hope this works! =)
I will let you know how it goes in about 5min.
That didnt help any. It formatted and reloaded everything but not to factory defaults. It still shows as ROM 2.17 etc.
that´s the last rom you have on there. it only resets to the factory setttings of the rom which is currently on your phone.
yeah. I need to find the factory ROM somewhere.
Unfortunately I cant access ftp servers from my pc here @ work.
which version do you want? you can try a new one if your phone is unlocked. i just recently put on the new Mr.Clean 2.3 rom and like it pretty much actually. I can access the ftp here from work. if you want i can email you the file you want.
You wouldnt believe it, but i downgraded back to 1.xx and still had the problem, im currently upgrading back to 2.17.
I opene dup the port to allow me ftp access from here.
Whats the link to get to the rom you use?
then i really don´t think that it´s a software problem. maybe you should contact your customer support. the rom i have you can get here
ftp://xda:[email protected]/Wizard/Roms/MrClean_RUU_WIZARD_224a_AKU23_WWE.zip
sorry i couldn´t help. hope you find a way to fix it. i couldn´t live to have a keyboard i can´t use.
How can i get it?
Just upgraded to 2.3, having the same problem
how do i change the pad?