Hello,
i have some problem here.
I have windows mobile 6.5.3 (or 6.5.2? Don't know where to find out) and my button "áü" (next to space) isn't working. It's software error (i'we tried it in service menu). Have you any idea where i could find solution please?
Then i have also problem with camera button: first stage isn't working too, and this is REAL problem
When i'we tried service menu > keyboard, it wasn't working too (i mean just first stage of button, i can do photo but i cant focus) and above output area there was written "Power/Camera/Panel keys not supported" ...
Do you think that hard reset would help me?
Thanks a lot and sorry for my english.
Filcuk
to access the symbols u need to presss other button 1st
example: ë ... u need to press e 1st and than the button next to space
I was using it for a week, then it stopped working.
try installing this
http://www.filehosting.org/file/details/217377/SymSelectorSetup.CAB
Related
Hi everybody !
First af all, sry for bad english ! i will try to do my best but i'm french so this could explain some mistakes.
Does anybody experienced the same trouble ?
1/ my 4 buttons ( contact, calendar, camera and record ) always reset ! maybe 1 or 2 times a day.
I always have to go in the configuration panel to re-set the standard function and i can't have anymore access to the "record" button.
If i do -) start -) parameters -) buttons i always have to redeploy the affectation af each button by choosing in the list above BUT in this list i can't have access to the 'hotvoice' or if u prefer the 'record' application !
so i can't program the record button again to record !
am i clear enought ?
2/ when my 4 buttons reset i have a message on the screen (will try to translate ) "can't find the shortcut or pb with the shortcut / can't access to the required function "
Can anybody help ?
Qtek2020 or XDA2
SFR
Calendar+ today plug in
Scott Seligman's Launcher
FV&&PB Metro
that's all
Tks 4 all
Eric
Hi everybody
26 read and no response.
So i'm the only to have this pb OK well u can feel u all happy.
Sry for bothering u so !
Nice end of day 2 u all
Eric
never had that issue maybe because i leave the buttons at default
apart from the calander button which is set to voice command
and that dont get kicked back to default calander when i reset
Could please someone tell me how to make the up/down page button in WM6 to scroll a page up/down when pressed? Now I've managed to make it run from links to pages up/down when pressed, but every time after I use the page up/down button, I have to tap the screen to allow another up/down page button to work. And this is very annoying when I use the skyscape medical programs. Is there a way to make the up/down buttons move a whole page up/down when pressed, in any application / program?
Sorry for my bad english.
Thanks for support.
Scrooling problem in WM6
Could someone download and install any trail program from www.skyscape.com and then try to scrool up/down pages in it to see what's my problem? Maybe some of you would find a solution to that . Thanks.
Hi, can you put a direct link for download (to not have to create an account with skyscape)
WM6 scroll problem in skyscape progams
Yes, you're right...so here is the link to get a tryout of my problem with skyscape in WM5 and WM6 also:
http://rapidshare.com/files/136148894/abclabdata_ce.exe.html
The scroll problem was one cause for me to switch back to WM2003SE. If someone could help me by finding a solution for this problem I'd be glad to resume using WM6 . Thanks.
Have you tried contacting Skyscape support?
this issue is present in all devicse which run wm6 & wm6.1
and up till now i did not found any solution if anyone find one please
tell us
well if it is present on all devices the best way is like kheechun said, sontact skyscape support and inform them for the bug in their software
Hi brothers..
I'm Andy, new chef @ the iPAQ 6828 division. I would like to have advices for some problems I've found on 23XXX builds.
1. WM6.5.x OK button problem
Some menus in the were dead ends. I've found few on these:
If I enter those menus, I can't tap the X button to exit or assign the menu from the screen.
I can easily fix this by assigning a hardware button (on 6828) as the OK button but, tapping with no response still a problem. Is there any fix for these.
I found the same problem with HTC Kaiser AhmedFikry ROM WM6.5.5 Build 23577. But Kaiser has an OK button on it...
2. Camera
On the new builds I can't run my camera. It says "Failed to initiate Camera", and than the camera closes itself. I suspect there's some files in the SYS that I shall edited before I add the camera drivers and OEM on the ROM. Is there any files or modules which shall be edited inside the SYS Packages?
3. SPB Keyboards
I can install SPB Keyboards, but I can't use it due to some errors in the option. Device got stuck everytime I enter the Keyboard option in the control panel. Does anyone know how to fix this?
I would be very grateful for any advices...
Hi
I installed/uninstalled "HTC X-Button.CAB", and after that the volume hardware keys on the left side of the HD2 only do scrolling up and down... I want that those keys act as volume up and down manager, like always did.
Anyone knows how to solve this? It's very annoying -.-u
I tried software like AEBPlus and similar, but didn't work.
I hope that this can be solved doing some changes in the registry.
Was the volume key the only problem after removal?
Was there some problem that caused you to remove it in the first place?
What version HD2, Rom, radio?
What happens when you long press the volume keys?
Give me a link to the cab you used. There seems to be several versions of that app.
Sorry I made a mistake, the problem was after try "Touch X longpress sendkey taskmanager showcase.cab" and no HTC X-Button
I removed it because it didn't work in my phone, but no other problem.
ROM 1.48.412.2 (71294) ESN
RADIO 2.05.51.05_2
When I long press the volume keys, the current selection goes down or up in the same way as if you press it several times.
This is the exact cab I used
Code:
Three w and then --> megaupload.com/?d=PR3PVJA9
Thanks for your attention
OK there are some people working on some things
that ght help you in this thread.
http://forum.xda-developers.com/showthread.php?t=603186
I already had try that utility but it didn't work neither.
I think I'm gonna install/update the original ROM (or maybe try a cooked one).
Thanks for all!!
Hey guys and don't be mean if i get the word wrong and something like that ( I'm from Lituahnia) So I recently got an used HTC Touch 2 or mega or pro I don't know and I don't know some things like:
1. When I press the home button it opens me some shortcuts or programs instead of home screen. So does on everyone phones it happens? Or my is "broken"?
2. The other thing I want too ask is that when I press home button it opens me that programs and they are russian langue, but the start is english langue. Is that normal?
So I wanted too asked about this problems. Who can help please write or load a youtube vid(s). Thanks for the help
first find out what phone do you have .... then I recomend u to have a fresh rom on it ...
Okay so I have HTC Touch 2 and I reset my phone. I pushed the button "Clear Storage" and everything change. I guess i didn't need press that button... Okay the problem that I was talking before i solved and it's was Spb Home, but there is some new problem.. That clear storage delete some my contacs and it switch my time. My date... I need to put everything in "places". I know how too restor time and date, but I don't know how too change keybord how it was before and more... So I realy need advices and youtube vid(s) or photos.
P.S. And don't know what the heck is fresh rom . I realy need videos. Who can help, please help
same problem
great suggestion! ty!