...using SPB backup!??! I installed it...ran the backup utility...it restarted...but not all the way...it hangs on the windows mobile screen. No amount of soft resets have worked...it won't connect via activesync...and trying to hard reset is doing nothing.
Help?
craiggers14 said:
...using SPB backup!??! I installed it...ran the backup utility...it restarted...but not all the way...it hangs on the windows mobile screen. No amount of soft resets have worked...it won't connect via activesync...and trying to hard reset is doing nothing.
Help?
Click to expand...
Click to collapse
Try taking out the battery for a min or so.
Then replace and let it reboot.
tried that already..believe me...any other suggestions?
its not bricked...flash it with your original rom.
it won't connect via activesync. no activesync -> no flashing official rom.
Hold down the power button and the camera button while hitting the reset button. your phone should then boot into the tricolor boot screen. connect to your pc and reflash as needed....AS will not see your phone but the ruu will
...
unplug the usb cable, pull out your battery, put it back in, hold down your power button and camera button at the same time, your phone should be on the tricolor screen now (bootloader)
plug the usb cable in and reflash your phone.
Related
Guy,
Please Help
I was upgrading my XDAIIi to Xda IIi ROM v 1.11.162. during which it show an error message and it just went blank looking closely at the screen showing USB at the top of the screen and the bottom of it has v1.01,
when put on the cradle it showing USB.
I have press the reset botton God knows how many times
Please help someone
Were you trying to upgrade to the rom I posted? With RADIO 1.03 in the filename?
You need to press the power, d-button down and the reset button all together.
Then run the update program again. If it is the original O2 rom then it should work fine from there. If it is the rom I posted then the update will fail initially, just run the program a second time without touching your phone at all.
Hope this helps.
No, I am upgrading from O2 website. I am sorry it not connecting to my pc at all. No sign of life ,
it only display USB on the screen
Try doing a hard reset by holding the power button down and pressing the reset button.
Put it into bootloader by pressing the power, d-button down and the reset button all together and releasing them at the same time. The screen should say SERIAL. Connect it to your PC and the screen should then say USB. Then you should be able to run the update.
If this doesn't work as a last resort try taking the battery out for a while to let the backup run down and start again. Whatever happens the phone needs to go into bootloader mode and a rom applied to get it working again.
Please, which is the D-botton you are refering to
The D button is the "Directional" button, in between the green pickup phone button and the red hang up button.
Well I installed card export, and got some errors, after like the 2nd error my 9100 resetted itself and is stuck in the boot screen with cloads now.
A hard reset is no go, just behaves as a normal reset, and I'm pretty sure I red about this problem in another thread somewhere here, just can't seem to find it.
Anyone got an idea?
The only thing it shows now is:
IPL 1.01
SPL 1.01
GSM 1.13.10.0
OS 1.6.7.1
I am also stuck on the boot screen after my ROM update froze! Is this device now dead?!?! Please tell me there is a way to fix it!
Press and hold camera button and press resett button while you holding camera button.
now you enter bootloader (tree color screen) connect device to pc and run update you had on your device before it crached
Got it!!!
Hold down the Voice Button plus the Camera button at the same time and hit the reset button. That takes you into bootload mode. Then you will have a USB connection to the PC - not via active sync. Run one of the RUU update programs and you will be back....
At least it worked for me!
as it did for me
kjk said:
Press and hold camera button and press resett button while you holding camera button.
now you enter bootloader (tree color screen) connect device to pc and run update you had on your device before it crached
Click to expand...
Click to collapse
My soft reset button is not working. I can only reset by taking battery out of mda. What to do now? Help!
My usb cable detached during the rom update ... now it won't start and neither soft or hard reset works.
Please ... any suggestions
Plug it back in and re-run the update
It won't start so it makes no connection to active synch on the pc
Have you tried the boot loader mode. TO activate this mode, hold down the power button, lights button and press the reset button. The screen should go blank and have serial written on it. Once you plug in the usb, this will change to USB. Start the update again.
thanks both of you - worked and so relieved.
thought it was kaput!
Hi my tmobile wing that i bought off the craigslist is stuck on the main screen with tmobile and is not going beyond it
can some one please help me how can i make this phone work again
Try a hard reset
(hold down both soft keys and poke the stylus through the hole on the side of the phone under the volume slider)
If that doesn't work, you need to install this :
T-MOBILE STOCK RUU
In order to run this, you'll need to plug your phone to your PC via USB, then go into bootloader mode ... which means you need to hold down the camera button (and keep it down) while you soft reset (poke stylus through hole under volume slider)
When your phone is in bootloader mode, and plugged into USB, it should show "USB" in the corner... once that happens, run that file which will take the phone back to factory settings.
duprade said:
Try a hard reset
(hold down both soft keys and poke the stylus through the hole on the side of the phone under the volume slider)
If that doesn't work, you need to install this :
T-MOBILE STOCK RUU
In order to run this, you'll need to plug your phone to your PC via USB, then go into bootloader mode ... which means you need to hold down the camera button (and keep it down) while you soft reset (poke stylus through hole under volume slider)
When your phone is in bootloader mode, and plugged into USB, it should show "USB" in the corner... once that happens, run that file which will take the phone back to factory settings.
Click to expand...
Click to collapse
Thanks a million for the help now my wing is working again !!!!
duprade said:
Try a hard reset
(hold down both soft keys and poke the stylus through the hole on the side of the phone under the volume slider)
If that doesn't work, you need to install this :
T-MOBILE STOCK RUU
In order to run this, you'll need to plug your phone to your PC via USB, then go into bootloader mode ... which means you need to hold down the camera button (and keep it down) while you soft reset (poke stylus through hole under volume slider)
When your phone is in bootloader mode, and plugged into USB, it should show "USB" in the corner... once that happens, run that file which will take the phone back to factory settings.
Click to expand...
Click to collapse
Ahhh... it's not working, the utiltu says that it can't connect to my phone. What do i do. Is there some thing in settings or some hting that i need to change. PLease help. The stcuk screen is really getting me scared.
Wont Run Bootloader
I have tried holding the camera button and soft resetting multiple times, but it keeps getting stuck on the tmobile screen? What do i do??
After I flashed a ROM for the just clean oven, I had this same problem.
I fixed it (after many hours) by downloading this ROM:
http://www.mediafire.com/?clvw3cvyclo
Entering bootloader (hold in camera button and soft-reset.)
Running the tmobile rom.
It was very strange, it took 3 or 4 tries, but it eventually worked.
I don't understand why, since I did nothing differently, but try it afew times.
Hope you get it up and running soon!
BTW, what are your SLP numbers shown on the bootloader screen?
thx really worked
tryed like 4 times then it worked
PuffyTacos said:
After I flashed a ROM for the just clean oven, I had this same problem.
I fixed it (after many hours) by downloading this ROM:
http://www.mediafire.com/?clvw3cvyclo
Entering bootloader (hold in camera button and soft-reset.)
Running the tmobile rom.
Click to expand...
Click to collapse
...worked for me as well. Now, I'm too chicken to run the Hard SPL.
I was about to flash a new ROM to my T-Mobile HD2 and decided to install and run Task 29. After doing that my phone stays on the White screen with the pink square that says stick together. I can not get it to get to the bootloader screen and my computer does not recognize that it is linked by USB anymore. I have reset it several times. Any ideas?
yeah this is simple
pull the battery
remove the usb
put battery back on
turn phone on immediatly hold vol down + power(end key)
wait for bootlader screen
insert usb
flash
I tried the above several times and it just does the hard reset and then goes to the stick together screen and doesnt move.
vol up and vol down is hardreset
vol down and end key is bootloader
That fixed it......thanks!
Question answered Thread closed