hello everyone
im looking for opinions re. getting the replacement screen and digitizer
has anyone bought and installed a screen from ebay?
are those any good? has anyone experienced any problems with them?
any recomendations as far as those go
I've done it twice.... the replacement screen I bought on Ebay were fine the installation instructions were not for the 8525, but I picked my way through them and it worked fine. Becareful removing the screws and watch what you do and make sure your connections are good. I think I paid $60 for the screen and digitizer.....worth the money....
Screen Replacement
I replaced my screen and used Golden Electronics on e-bay. It worked fine after I figured out that I didn't have the screen securely attached. Once I fingered that out it was great. I got good feed back from golden electronics. I would recommend them.
thanks for the info guys
the reason for this post, i was woried about replacing the screen with the non OEM part, but since i need a display anyways $50.00 on ebay sounds pretty good.
Related
ok people, i have listed this before and got messed around with people saying they are going to pay then no money arriving, the screen is 100% mint condition, as it was used with a screen protector all of its life, only mark is a slight water mark between the touchscreen and the actual screen itself, this makes no diffrence at all to the workings of the touchscreen and it can only be seen when the screen is not in use(standby) so when you are using the phone for work, games or whatever you will not even notice the mark, im looking for £55 delivered in the uk. postage will be more if you want it sent outside of the uk.
Cheers
Mike
still for sale people
ebay ->
does it fit a xda2s
regards kevin
Hi,
Is your screen the actual LCD?
Paul.
as to is fitting the xda2s im not sure, to be honset i wouldnt think so, and tot he other guy, it is lcd and touchscreen
Please, its been about a month since the earpiece on my wizard died and i can't find the part anywhere! I found one damaged wizard on ebay which sold for $400 with a damaged screen! obviously a fradulent buyer but the seller hasn't replied yet.
So if your wizard is water damaged, smashed, or simply inoperable i need this one part to fix my earpiece. Also my brothers wizard's speakers are blown so it'd be great if i could get a hold of those two.
What i need is the ribbon cable which connected the main board to the top sliding half of the device. Its a ribbon cable attached to a circuit board on both ends.
Please i really need this so i can bring the phone part of my wizard back to life.
PM me if you know where i can get this part or if you have a damaged wizard.
Thanks in advance!
broken wizard!
i do have a working one with cracked screen. where are you located?
i should have mentioned that.. I'm in austin, texas. If u are over seas i can check to see if i can make it elligible for a corporate rate to ship it to me.
Also how much would u be wanted for it?
I'd offer you mine, but I got the same thing broken.
i just emailed 2 sellers on ebay which have cellphone parts and wizard housings in there stores, awaiting there reply. And i'm working something out with the one person with a damaged one from ebay.
What do you guys think $85 good for a wizard with a damaged screen?
broken wizard
I have a broken wizard--I dropped it, but I can still make calls from it via the bluetooth headset.
PM me if you are interested and I'll give you my phone #.
I've pm'd u, but does that mean your earpiece is broken as well? Cuz what i need is the ribbon cable that powers the earpiece, LCD, digitizer, softkeys, and everything else on the front half of the device. So if yours is broken then probably won't help mine out much.
i guess so. If you need an intact (front) then mine won't help--due to the fact that the "cal answer/hangup " buttons do not work.
The damaged one i bought off ebay came in today, swapped the parts out and now my earpiece is working again!! i'm so excited!!
Now i have all these parts lying around if anyone needs anything send them my way. The parts i got are:
The main board
Camera
Vibrator
Main housing (except for the front its really banged up)
Antenna
Keyboard
But no battery cover, didn't come with one.
Heres a pic of the mess i had on my desk but it all worked out perfectly
--------------------------------------------------------------------------------------------
I no longer have the damaged wizard so please don't PM asking for parts.
hey fone_fanatic, wondering if you ever experienced your Wizard creaking when you press down on the front faceplate(below the call/end buttons)....seems to come from the hinge right under the the right soft key (the one connected to the keyboard), only thing is it only makes noise when the keyboard is closed and my keyboard is not loose at all(nice and snug)....just wanted to know if you might know of a fix for my problem, would you recommend me taking it apart or just sending it in for a warranty repair or do you know if it is pretty easy to somehow shorten the gap between the front face and the keyboard?.... appreciate the time.
Regards,
P.S. My Wizard works fine, its just starting to get very annoying when I make/end phone calls.
no, mine doesn't make any noise when i press down there. well there is a noise but its coming from the battery cover. if your device is under warranty, i suggest sending it in if it bothers you that much. the reason being because when u open it up your bound to break a couple of clips which might make it worse.
fone_fanatic: I love that mess on your desk
You might want to mask out your First National Card though - edge detection filters would love that image...
V
don't worry about the card, its one of those advertisement cards you get in the mail syaing your pre-approved or whatever. i always keep those cards and use them with taking devices apart.
fro the broken units
check out this site they repair and sell repair parts
http://www.pocketpctechs.com/main~u...essories-Stylus+-+Enhanced~item~IMT-LCD03.htm
anyone got a 8125 with a cracked LCD but all other functions still working?
yes, i'm aware of pocket pc techs but they didn't have the part i needed to fix mine whihc is why i bought a damaged one and salvaged the part i needed out of it. Now i've got all these extra parts , but what to do with them...?
@ fone_fanatic
thanks for the advice....off to warranty it goes...hope it comes back with no new problems (fingers tightly crossed)....
Regards,
hey can I see that pic of the parts u got left?
I wouldnt mind buying a wizard with just a broken LCD if it was cheap. $180 to send it in to fix a LCD is super expensive when the phone is like $350 on ebay
fone_fanatic said:
yes, i'm aware of pocket pc techs but they didn't have the part i needed to fix mine whihc is why i bought a damaged one and salvaged the part i needed out of it. Now i've got all these extra parts , but what to do with them...?
Click to expand...
Click to collapse
... wait for the next thing to break? :lol:
tonydt1g3r said:
hey can I see that pic of the parts u got left?
I wouldnt mind buying a wizard with just a broken LCD if it was cheap. $180 to send it in to fix a LCD is super expensive when the phone is like $350 on ebay
Click to expand...
Click to collapse
The reason i bought it the this one with the damaged lcd is because i couldn't find the part i needed (Rigid Flex Board) anywhere so i swapped my broken one out with this one. So if i was to put this back together not only would the lcd be busted but the earpiece won't work also the speakers would be blown (sold good speakers to a friend). Also the front case is heavily scratched/dinged, looks like someone smashed a brick on the phone.
Hi!
I have been lurking around in this forum for quite some time, but I have been unable to find any information regarding how to disasamble the universal.
I have a broken screen, and I am thinking about buying a new lcd on ebay and try to replace the broken lcd.
I have tried to unscrew the six screws under the screen, but I am not able to open up and "get inside" to replace the lcd.
Are there any information aviable on how to do this, or even better an instruction on how to replace the lcd screen?
Thanks for any help and a great forum!
replacment screen
hi, i had the same issue where i accidently sat on my uni and cracked da screen. i ended up goin to a guy in slough who fixed ma screen for £120 (well £110 cos da screen has a really small scratch in the bottom corner on it - hardly visible)
It works perfectly and the screen looks new. im running all my normal apps on it, tomtom and i have no probs.
The guy advertises his screens on ebay and you can either send your uni to him or go to his house and get it done in front of you within 10 minutes. Definatly recommend this guy and he does all the XDA type screens and HP iPAQ's.
If anyone wants to contact this guy his number is 07919174796. He can sell you the screen on its own if you like.
HTC instructions
I have the pdf on how to dismantle and reassemble the HTC universal. Although I think it is in the FTP somewhere too.
BR
Wassa
itwasntme187 said:
hi, i had the same issue where i accidently sat on my uni and cracked da screen. i ended up goin to a guy in slough who fixed ma screen for £120 (well £110 cos da screen has a really small scratch in the bottom corner on it - hardly visible)
It works perfectly and the screen looks new. im running all my normal apps on it, tomtom and i have no probs.
The guy advertises his screens on ebay and you can either send your uni to him or go to his house and get it done in front of you within 10 minutes. Definatly recommend this guy and he does all the XDA type screens and HP iPAQ's.
If anyone wants to contact this guy his number is 07919174796. He can sell you the screen on its own if you like.
Click to expand...
Click to collapse
itwasntme187: Thanks, I was about to buy from this guy, but found another one at ebay that was a little bit cheaper ($160 for a new LCD screen). I sent an order today, so I hope I have done the right thing trying to fix it my self.
wassa: Thanks for notifying me that there was a manual out there. I checked the ftp and found the manual on dismantle and reassemble the HTC universal.
Thanks for the help to both of you.
you can download it here. http://buzzdev.net/component/option...om_remository&Itemid=100&func=fileinfo&id=304
The replacement was a success.
I got the LCD from ebay on Monday and using the above mentioned manual I was able to replace my broken LCD screen. It is an easy job if you follow the instructions in the manual. There is only a total of 8 screws that has to be unscrewed to get the job done. Now if I was only able to get a replacement camera flash light my universal would be in an almost perfect condition.
glad you got everything working!
Hi, im a newbie here. I also broke the LCD screen on my Universal/Xda Exec.
How can I access the FTP site to download the instructions on how to replace the screen?
Many thanks for your help.
you can get a new screen + have it replaced for 40 quid. Basically HTC has an agreement with the carphone warehouse and offer a repair service with all parts included for 40 pounds (I'm using a bloody german keyboard so i can't type the pound sign). When i broke my screen (I was bump starting a car with it in my pocket) i thought damn, now i'm 100 odd quid out of pocket, so i was suspiciously surprised when it was only 40 pounds. The only drawback is it takes about 6 weeks. Maybei should have posted this last year when i had my screen replaced...
LCD Replacement instruction sought
Hi. Hope the person who provided the instruction is still around. I am another Universal user who needs to replace the screen as the digitizer has not been working properly.
Anybody could provide the instructions on how to replace the LCD screen please? As far as I know the Universal's LCD screen and digitizer are attached and could not be separated without (de)soldering. But providing that the digitizer itself costs much less than the whole LCD ($8 vs. $135), if anyone would please provide the instructions on how to replace the digitizer (on the same lcd screen), that would really be awesome!
Really I do not enjoy the idea of sending the unit away for 2 weeks with £100 expense.
Thank you very much in advance!
Since there are obviously people here who have done this before could someone maybe help me out?
My screen is intact, but I dropped my Universal a while ago and since then the 2-axis screen hinge seems a bit loose. Everything works ok, it's just that the cover with the screen in it are not as firmly attached to the base as they used to be.
Can this be fixed by taking the device apart and reassembling it (tightening some screws and so on) or would it be a waste of time?
I discovered my phone filled up with sprite during a house move for my sister , long story short over the course of 2 hours or maybe more my touchscreen slowly died and now does not work at all.
Ive taken it apart and all looks well, I've got my finger on the "order new screen/digitizer" button just want to know if anyone knew if that was a bad idea and wasn't going to fix it... any suggestions or notes? thanks guys
Buy new LCD (complete).. If you buy just the digitizer then you have to unglue the digitizer from the screen, Align and reglue the new one. If you stuff it up its a lot of time and effort wasted and you still have a dud phone...
The complete lcd WILL cost more (on ebay Oz digitizer is $20 and lcd is $100) but the hassels of putting in a new digitizer are ridiculous...
I actually just bought a "broken" Hermes of the same model and paid $120.. It still worked fine but I now have OTHER spare parts if something else dies...
Just a thought....
Cheers...
well http://www.blackberry8100parts.com/...Touch-Screen-Digitizer-With-Tools_p_3-73.html is what i was looking at, as far as i can tell thats the screen and the digitizer together and i dont have to mess around with putting the two together for 35$, or am i mistaken?
Looks right and is a good price too...
Hey there,
Has anyone here replaced a dead LCD screen (not digitizer)? IF you have could you tell me the symptoms you were getting. I'm going to try to replace mine but I'd like to be sure that it's the screen causing the problem and not something else.
Thanks!
GG
also, could you let me know where you got your LCD from?
You can get them from ebay for about $100, that all i know of though.
Google lms283gf01 and see if you can find some
Actually, I picked one up on eBay for $28. Yes, that was a new LCD, not the digitizer. It even came with the tools to open the phone. There are good instructions around for a complete dis-assemble and it was relatively painless.
I broke the original LCD, so there was no question whether it "failed" or not.
Well I can't see any cracks or anything in the LCD. I think I'm just going to get a Diamond. Unfortunately, no NFSFAN...
GG
lcd screen
Hey, you wanna get rid of your broken vogue? [email protected]. get back with me if you're interested. Or maybe I can advise you on how to repair your vogue...I've done several myself.
Good luck.