hermes touchscreen dead... UH OH - 8525, TyTN, MDA Vario II, JasJam General

I discovered my phone filled up with sprite during a house move for my sister , long story short over the course of 2 hours or maybe more my touchscreen slowly died and now does not work at all.
Ive taken it apart and all looks well, I've got my finger on the "order new screen/digitizer" button just want to know if anyone knew if that was a bad idea and wasn't going to fix it... any suggestions or notes? thanks guys

Buy new LCD (complete).. If you buy just the digitizer then you have to unglue the digitizer from the screen, Align and reglue the new one. If you stuff it up its a lot of time and effort wasted and you still have a dud phone...
The complete lcd WILL cost more (on ebay Oz digitizer is $20 and lcd is $100) but the hassels of putting in a new digitizer are ridiculous...
I actually just bought a "broken" Hermes of the same model and paid $120.. It still worked fine but I now have OTHER spare parts if something else dies...
Just a thought....
Cheers...

well http://www.blackberry8100parts.com/...Touch-Screen-Digitizer-With-Tools_p_3-73.html is what i was looking at, as far as i can tell thats the screen and the digitizer together and i dont have to mess around with putting the two together for 35$, or am i mistaken?

Looks right and is a good price too...

Related

cracked screen - what do I need?

Just cracked my screen today. I went searching on Ebay and saw LCD screens and a digitizer. What parts do I need? either or both?
Phone still works, just can't read anything on the screen. It lights up but its all messed up.
I'm in the US, anyone have a phone for parts?
If you think that you can do it yourself, you will have to order a new LCD component and - just to be on the save side - a digitizer as well. Your best source might be eBay. Other than that, the Hermes really dropped in price, so, if you want to stick with a Hermes, try to get you a new one on eBay and keep your broken one for parts.
NO!!!!!!! You just need the LCD. Make sure it has the digitizer ALREADY on it. Save some $$ and some stuffing around with a possible failure.
In Oz I can get 1 for less than $100. You should be able to get them cheaper depending where you are in the world.
When you get the LCD/digitizer combo then use the Hermes HTC Service manual to pull apart your Hermes and put back together. You'll also need a size 6 torque key, a smll flatblade screwdriver and a small philips head screwdriver.
Take the steps 1 at a time and if you don't understand something then reread until you do.
When you put back together watch out for the camera focus and the battery access latch. If you don't line up the camera focus switch with the swich on the back cover you will have problems and if you put the battery latch on the wrong way you're not gonna be able to get the battery cover off easily.
Cheers...
Thanks for the advice. I'mgoing to try to do this myself and save a few bucks. I checked local repair shops and they want $120 to repair.
I haven't seen any LCD's that mention they have the digitizer with it. Is there a way to tell? Otherwise, I'll see what I can find.
ultramag69 said:
NO!!!!!!! You just need the LCD. Make sure it has the digitizer ALREADY on it. ...
Click to expand...
Click to collapse
LOL,
So, he needs the digitizer!
Yes Junner2003, but you DON'T buy it separately... That is a MAJOR pain in the neck. Its almost impossible to attach properly.
The LCD should come with the digitizer attached. Ask the seller if it is. If they say "no" then go elsewhere. There's no point in saving a few bucks on an LCD that may not be made to work properly.
Thanks for that tip. I found one with the digitizer so I'm crossing my fingers.

Broken Screen

Hi all,
I have a HD2 and some numpty decided running a shopping trolley into my leg would be fun... the result, I have a broken screen.
The actual damage appears to only be superficial, I can still use the touch screen and the phone is in full working order but the glass has cracked.
I've been looking online and all I can find is a replacement digitizer... I am wondering if anyone know that this is what I need or not?
Regards
Ben
If the touchscreen still works then you don't need to replace the digitizer. You only need the glass part, but separating the digitizer from the glass and replacing it is a very difficult process and you would probably be better off getting a whole new screen assembly instead.
if the touch screen still works then in theory you just need a new piece of glass, not a digitizer (which is a thin plastic sheet).
problem is whether or not you can get the old digitizer off thee broken glass without damaging it.
mZimm said:
If the touchscreen still works then you don't need to replace the digitizer. You only need the glass part, but separating the digitizer from the glass and replacing it is a very difficult process and you would probably be better off getting a whole new screen assembly instead.
Click to expand...
Click to collapse
Do you know of anywhere that sells the full set up?
B
Anyone know anything about this? I really need to get it fixed quickly
Found something on Mobilefun (check google cant paste links)
Would that be suitable?
Its the glass display and digitizer?
If you want to try to do it yourself these official HTC repair videos may help.
Disassemble - http://www.youtube.com/watch?v=cL-jnUKufC4&feature=player_embedded
Reassemble - http://www.youtube.com/watch?v=t8Q7mXdcJ54&feature=channel
I suppose I could do it myself but I'm really looking at prices of parts before I take it to some phone shop, I would have my insurance cover it but my bank are being arses about it...
That way if they say its 150.00 then I can say ahhhh na....
ba0987 said:
I would have my insurance cover it but my bank are being arses about it...
Click to expand...
Click to collapse
You have a premium debit account that insures your phone?
yeh, however they claim I never registered it even though I have provided them proof of my telephone call...
Not impressed but I would rather put that behind me closing the account with them and moving banks
and how far into the process do you have to go before you take off the glass section of the phone I can see it seperate at the end but I didnt see whem it was taken off
ta B
this is not really related to repairing your own broekn hd2, but it's for sure youtube gave it to me as a related video to the HD2 reassemble:
http://www.youtube.com/watch?v=Db7pKjUrNXQ
I loved it, every bit of it.
I have a Natwest Premium account and I wouldn't trust them with my phone insurance as far as I could throw them. The £10 I spend a month on my O2 insurance is worth it, i've claimed 2-3 times in the last 4 years, and they have bought the new one to my door and taken the pieces of my old ones away, job's a goodun!
And as for your question I haven't a clue if I am honest, I have never disassembled a HD2 before. Thank God.

Broken S4, is it worth anything to keep/sell? What to do if selling?

Greetings,
My S4 screen cracked a few weeks ago. I'm pretty handy at fixing just about anything, but this time I've failed. I was going to replace the screen tonight, however unlike the many videos, when I heated up my phone and started to lift up to remove the adhesive, the cracked screen shattered like safety/tinted glass. The glass was finally off, however I suppose I truly didn't heat it enough, as there was a lot of adhesive residue behind. I was slowly cleaning it up, and suppose I pressed too hard on the digitizer, that the bottom left corner has display issues now, with a very faint line running left to right around the problem area.
So, here I sit with a new glass, optically clear adhesive, uv lamp, and a broken S4 Just picked it up about 2 months ago, but lesson learned (buy a heat gun and a temp gun if i ever need to do this again).
I'm ready to move on with life and get a new phone. Since I'm mere months in to my contract, I'll be shopping for a new phone on my own online. Might get another S4, might get a Note 3.
I'll take any constructive advice folks have to offer. Is the phone worth anything to anyone as it sits? I see a bunch of broken phones on ebay selling for insane prices (150+) with broken digitizers. I suppose my phone, given it's only the digitizer (and now missing glass) that's broken and the actual electronics are working might be useful as a parts phone to fix someones water/short circuited phone? If I were to post the phone and all accessories on ebay, how would the sale work as far as the phone being linked to me or my tmobile account? I'd keep the SIM of course, and the IMEI is good since it's actually my phone, is the proper thing to do to simply sell it, let someone else stick in their SIM and move on with life, or are there risks I need to be concerned with when handing my phone off to someone else, might they cause me some annoyances some how if i dont safeguard myself?
Thoughts? Or, even thoughts about what to get next?
After looking at prices for new S4s or a Note 3, maybe the best bet is to replace the digitizer, it looks like a new digitizer and glass is $200. that might be the way to go
I would agree, if you are able to replace both parts it will work out much cheaper. Looking at it on the brighter side, once the digitizer is broken replacing it and the screen is much much easier.
id4rox said:
After looking at prices for new S4s or a Note 3, maybe the best bet is to replace the digitizer, it looks like a new digitizer and glass is $200. that might be the way to go
Click to expand...
Click to collapse
Definitely just replace the whole screen. Also look if any of the official samsung repair shops near you have any discounts; I got my S3 screen replaced for around 80€ (been more careful with my S4).
Thanks folks. I have a new digitizer setup on the way ($200 shipped on ebay), will be black (front) on white (back) once installed! I feared for the worst at the point of breakage, now looking back a $200 repair doesn't seem that bad! Appreciate the responses!
U could try a store like the one I use it's in the UK but maybe of some help ?
http://www.parts4repair.com/
Sent from my viperone
---------- Post added at 07:58 AM ---------- Previous post was at 07:55 AM ----------
Samsung s4 repair parts page http://www.parts4repair.com/samsung-i9500-galaxy-s4/
Sent from my HTC One using xda app-developers app
Bought a new digitizer on ebay for $200 thursday morning and had it installed saturday. very simple process (thanks to some youtube videos showing how it's done)
well that s some good news congrats

Advice: Upgrade or repair

Hey guys
Ive had my nexus 4 for a while now, bought it when it came out a few years ago now. I had managed to keep it perfectly unharmed until i unfortunately dropped it the other day which cracked the screen and seemed to have killed the touchscreen.
The touchscreen now just doesn't work at all.
So my question was, do you reckon i should buy one of those screen repair kits, or something similar and attempt to fix the phone or go for an upgrade and try my luck finding a invite ticket and buying a OnePlus One? Just wondering what your opinions are.
Im stuck now with an iPhone 3gs! Tough times indeed.
lewis03 said:
Hey guys
Ive had my nexus 4 for a while now, bought it when it came out a few years ago now. I had managed to keep it perfectly unharmed until i unfortunately dropped it the other day which cracked the screen and seemed to have killed the touchscreen.
The touchscreen now just doesn't work at all.
So my question was, do you reckon i should buy one of those screen repair kits, or something similar and attempt to fix the phone or go for an upgrade and try my luck finding a invite ticket and buying a OnePlus One? Just wondering what your opinions are.
Click to expand...
Click to collapse
Replacing the screen assembly is actually relatively easy on the Nexus 4. Note that I said screen assembly, and not the digitizer. If you don't know, the glass "screen" is called the digitizer, which is glued to the LCD behind it. Now, it could be that all that actually needs replacing is the digitizer, but this is not an easy task, requires some specialist equipment, and you're still likely to screw it up. So I highly recommend going with the screen assembly, which is both the LCD and digitizer already ready to go.
You can get a new screen assembly off eBay. There are 2 different ways. One is just the screen assembly. It's cheaper, $45, but it requires that you remove the old one from the bezel, which can be a PITA. The other way is the full front assembly, which means you're getting the screen assembly already glued in to a brand new bezel. $60, a lot less hassle, and your entire front will be new and shiny and ding/scratch free again. Obviously, this is the choice I'd recommend (I've done it myself).
Might as well get a new battery while you're at it, for $20. At this point in its life, you've likely charged your phone several hundreds of times. Li-ion batteries will lose upwards of 20% of their original capacity after ~500 "cycles".
ifixit.com has some great tear-down photos, and there's a number of guides on youtube. It might sound a bit daunting, but it's a lot easier than you might think, at least with this phone.
I can't tell you whether you should just get a new phone or not - I don't know your situation, finances, urges, etc. But I will say that for a mere $80 you will practically have a new Nexus 4. Stick around, learn how to flash custom ROMs and kernels (if you don't already), and you very much will have a new phone. Or a great back-up to your new one.
Im stuck now with an iPhone 3gs! Tough times indeed.
Click to expand...
Click to collapse
Ouch.
Planterz said:
Replacing the screen assembly is actually relatively easy on the Nexus 4. Note that I said screen assembly, and not the digitizer. If you don't know, the glass "screen" is called the digitizer, which is glued to the LCD behind it. Now, it could be that all that actually needs replacing is the digitizer, but this is not an easy task, requires some specialist equipment, and you're still likely to screw it up. So I highly recommend going with the screen assembly, which is both the LCD and digitizer already ready to go.
You can get a new screen assembly off eBay. There are 2 different ways. One is just the screen assembly. It's cheaper, $45, but it requires that you remove the old one from the bezel, which can be a PITA. The other way is the full front assembly, which means you're getting the screen assembly already glued in to a brand new bezel. $60, a lot less hassle, and your entire front will be new and shiny and ding/scratch free again. Obviously, this is the choice I'd recommend (I've done it myself).
Might as well get a new battery while you're at it, for $20. At this point in its life, you've likely charged your phone several hundreds of times. Li-ion batteries will lose upwards of 20% of their original capacity after ~500 "cycles".
ifixit.com has some great tear-down photos, and there's a number of guides on youtube. It might sound a bit daunting, but it's a lot easier than you might think, at least with this phone.
I can't tell you whether you should just get a new phone or not - I don't know your situation, finances, urges, etc. But I will say that for a mere $80 you will practically have a new Nexus 4. Stick around, learn how to flash custom ROMs and kernels (if you don't already), and you very much will have a new phone. Or a great back-up to your new one.
Ouch.
Click to expand...
Click to collapse
Thanks for the great response! I think im going to revive my Nexus 4! Or at least try to It should be fun anyway taking it all apart!
Thanks for all your help!!
lewis03 said:
Thanks for the great response! I think im going to revive my Nexus 4! Or at least try to It should be fun anyway taking it all apart!
Thanks for all your help!!
Click to expand...
Click to collapse
If you need any assistance with dis/reassembly, I'm more than happy to help. I've had my Nexus 4 apart probably a few dozen times. Most important thing is to go slowly. Don't lose screws, and don't lose the tiny rubber gasket that's part off the proximity/ambient light sensor module. If, after reassembly, your screen goes black when making a call (and it's not against your ear), take it apart again and put the rubber gasket in backwards.
I had same problem. Please not that ebay china sellers are not selling oem displays and there are huge difference in terms of quality. I myself bought original oem LG from Germany, but it costed 100$
p.s. found him http://www.ebay.de/itm/Original-LG-...284?pt=DE_Handy_PDA_Akkus&hash=item35d533c834
Stickers, numbers on chasis all looked legit.

Digitizer or whole LCD? Experience?

I cracked the screen but just the digitizer as far as I can see.. Screen has worked and digiziter for about 6 months seems 100% only 3 little hairline cracks. Ive waited because replacement cost so high and its not that bad doesn't stop function. I was wandering If anyone here has just replaced digi becouse thats way cheaper. And if this unit is one piece or they are actually separate and easy to replace separately from each other.
Thanks.
The Digitizer and LCD are glued together with silicone, which yes, can be separated and reseated, but it will not look or operate at 100% if you try to do it separately by hand.
I've repaired many phones for friends - a part time job has me fixing ~10 iphones a day - and let me tell you, it's not worth the aggravation or time to try to seat a digitizer on an LCD perfectly. Machines do it for a reason.
I can get LCD+Digitizer assemblies for the 6P at my shop in Canada, which run about $250 CDN (185 USD) + shipping/tax. Whether that price is better online or not, I'm not sure.

Categories

Resources