cracked screen - what do I need? - 8525, TyTN, MDA Vario II, JasJam General

Just cracked my screen today. I went searching on Ebay and saw LCD screens and a digitizer. What parts do I need? either or both?
Phone still works, just can't read anything on the screen. It lights up but its all messed up.
I'm in the US, anyone have a phone for parts?

If you think that you can do it yourself, you will have to order a new LCD component and - just to be on the save side - a digitizer as well. Your best source might be eBay. Other than that, the Hermes really dropped in price, so, if you want to stick with a Hermes, try to get you a new one on eBay and keep your broken one for parts.

NO!!!!!!! You just need the LCD. Make sure it has the digitizer ALREADY on it. Save some $$ and some stuffing around with a possible failure.
In Oz I can get 1 for less than $100. You should be able to get them cheaper depending where you are in the world.
When you get the LCD/digitizer combo then use the Hermes HTC Service manual to pull apart your Hermes and put back together. You'll also need a size 6 torque key, a smll flatblade screwdriver and a small philips head screwdriver.
Take the steps 1 at a time and if you don't understand something then reread until you do.
When you put back together watch out for the camera focus and the battery access latch. If you don't line up the camera focus switch with the swich on the back cover you will have problems and if you put the battery latch on the wrong way you're not gonna be able to get the battery cover off easily.
Cheers...

Thanks for the advice. I'mgoing to try to do this myself and save a few bucks. I checked local repair shops and they want $120 to repair.
I haven't seen any LCD's that mention they have the digitizer with it. Is there a way to tell? Otherwise, I'll see what I can find.

ultramag69 said:
NO!!!!!!! You just need the LCD. Make sure it has the digitizer ALREADY on it. ...
Click to expand...
Click to collapse
LOL,
So, he needs the digitizer!

Yes Junner2003, but you DON'T buy it separately... That is a MAJOR pain in the neck. Its almost impossible to attach properly.
The LCD should come with the digitizer attached. Ask the seller if it is. If they say "no" then go elsewhere. There's no point in saving a few bucks on an LCD that may not be made to work properly.

Thanks for that tip. I found one with the digitizer so I'm crossing my fingers.

Related

Broken Screen

Hi all,
I have a HD2 and some numpty decided running a shopping trolley into my leg would be fun... the result, I have a broken screen.
The actual damage appears to only be superficial, I can still use the touch screen and the phone is in full working order but the glass has cracked.
I've been looking online and all I can find is a replacement digitizer... I am wondering if anyone know that this is what I need or not?
Regards
Ben
If the touchscreen still works then you don't need to replace the digitizer. You only need the glass part, but separating the digitizer from the glass and replacing it is a very difficult process and you would probably be better off getting a whole new screen assembly instead.
if the touch screen still works then in theory you just need a new piece of glass, not a digitizer (which is a thin plastic sheet).
problem is whether or not you can get the old digitizer off thee broken glass without damaging it.
mZimm said:
If the touchscreen still works then you don't need to replace the digitizer. You only need the glass part, but separating the digitizer from the glass and replacing it is a very difficult process and you would probably be better off getting a whole new screen assembly instead.
Click to expand...
Click to collapse
Do you know of anywhere that sells the full set up?
B
Anyone know anything about this? I really need to get it fixed quickly
Found something on Mobilefun (check google cant paste links)
Would that be suitable?
Its the glass display and digitizer?
If you want to try to do it yourself these official HTC repair videos may help.
Disassemble - http://www.youtube.com/watch?v=cL-jnUKufC4&feature=player_embedded
Reassemble - http://www.youtube.com/watch?v=t8Q7mXdcJ54&feature=channel
I suppose I could do it myself but I'm really looking at prices of parts before I take it to some phone shop, I would have my insurance cover it but my bank are being arses about it...
That way if they say its 150.00 then I can say ahhhh na....
ba0987 said:
I would have my insurance cover it but my bank are being arses about it...
Click to expand...
Click to collapse
You have a premium debit account that insures your phone?
yeh, however they claim I never registered it even though I have provided them proof of my telephone call...
Not impressed but I would rather put that behind me closing the account with them and moving banks
and how far into the process do you have to go before you take off the glass section of the phone I can see it seperate at the end but I didnt see whem it was taken off
ta B
this is not really related to repairing your own broekn hd2, but it's for sure youtube gave it to me as a related video to the HD2 reassemble:
http://www.youtube.com/watch?v=Db7pKjUrNXQ
I loved it, every bit of it.
I have a Natwest Premium account and I wouldn't trust them with my phone insurance as far as I could throw them. The £10 I spend a month on my O2 insurance is worth it, i've claimed 2-3 times in the last 4 years, and they have bought the new one to my door and taken the pieces of my old ones away, job's a goodun!
And as for your question I haven't a clue if I am honest, I have never disassembled a HD2 before. Thank God.

[Q] Scratch removal

Hi,
after my wife dropped my phone (accidently she swears) I have some small scratches on the phone. (See Picture below)
Someone knows some ACME Cleaner&Scratch remover for that?
Greetings .. seems that I have had the HD2 for the longest time ...
OOO!! Ouch! Looks like it's time to see the phone doctor. Or, if you feel brave enough, you can fix it yourself. They have replacement screens on ebay. Since you have the EU model the contacts for the screen and the digitizer are soldered together. So you have 3 options. 1. Take it to someone else to fix it. 2. Attempt to order just the digitizer and if you have some time and surgical skills solder the contacts yourself or, 3. Get a fully assembled LCD and digitizer that is already soldered together and swap them out. The cheapest would be to just get the digitizer but if you have to factor in the time and headache of soldering those tiny contacts together, I think getting the assembled parts would be my choice. The US T-Mobile model has a small plug-in type connector on it so there is not soldering. I replaced mine and it is quite a chore. You have to be very careful and don't rush it or you will break things. Good luck!
Yeah you've got more than scratches there! You've got a smashed screen
You'll have to replace the glass
the guy above stated pretty much everything you need to know but here's a link to a lcd+digitizer combo that is fairly cheap: http://www.ebay.com/itm/New-LCD-Dis...192999?pt=PDA_Accessories&hash=item45fdf14d27
I know guys, the scratches where just kidding
The complete replacement has been ordered already, will fix it by myself
RollerCoasting said:
Yeah you've got more than scratches there! You've got a smashed screen
You'll have to replace the glass
the guy above stated pretty much everything you need to know but here's a link to a lcd+digitizer combo that is fairly cheap: http://www.ebay.com/itm/New-LCD-Dis...192999?pt=PDA_Accessories&hash=item45fdf14d27
Click to expand...
Click to collapse
He was being sarcastic with the 'scratches' thing :L
MasterMerlin said:
I know guys, the scratches where just kidding
The complete replacement has been ordered already, will fix it by myself
Click to expand...
Click to collapse
That's great. Like I said be very careful in taking it apart. Especially the flex cable that controls the volume rocker. Take your time and you can get it fixed.
Check out this website: http://pocketnow.com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
It has some videos on disassembling and assembling the HD2 just so you see what you have to deal with. Also another good investment would be to see if you can get some double sided tape to stick the back of the LCD to main frame if you can't salvage the stuff that's there already. It can't be too thick though because you'll run into problems of getting it put back together. They have that on ebay also.
yes
option one.... change screen..
option 2...change wife.....
hahaha change your wife my friend
htchd2fix said:
yes
option one.... change screen..
option 2...change wife.....
Click to expand...
Click to collapse
haha change screen is cheaper i guess

[Q] Digitizer replacement questions

Hi All,
Broke my glass + digitizer, but lcd ok. Got a replacement and managed to separate the original lcd, what I'd like to know is do I really need to glue the lcd to the new digitizer? I've put it back together just loose for the time being and seems to look and work fine. Any risks to just glueing the digitizer/screen to the frame and leaving the lcd loose inside?
Also, I still have glue gunk on the lcd screen, I've ordered some "151 sticker remover" to get rid of it, but it occurred to me it might damage it. Anyone know if it would be ok? If not anything else recommended, maybe something I could make at home?
Thanks!
kaligula1234 said:
Hi All,
Broke my glass + digitizer, but lcd ok. Got a replacement and managed to separate the original lcd, what I'd like to know is do I really need to glue the lcd to the new digitizer? I've put it back together just loose for the time being and seems to look and work fine. Any risks to just glueing the digitizer/screen to the frame and leaving the lcd loose inside?
Also, I still have glue gunk on the lcd screen, I've ordered some "151 sticker remover" to get rid of it, but it occurred to me it might damage it. Anyone know if it would be ok? If not anything else recommended, maybe something I could make at home?
Thanks!
Click to expand...
Click to collapse
I am in search for digitizer. How much you got it for? Any sources?
I believe this video should help you. It mentions that you have to glue digitizer and lcd.
https://www.youtube.com/watch?v=MI55gTtLYHI
1078
IndianSuzuki said:
I am in search for digitizer. How much you got it for? Any sources?
I believe this video should help you. It mentions that you have to glue digitizer and lcd.
Click to expand...
Click to collapse
Thanks, on closer inspection I htink my colours are a little washed out without the glue, so am just going to go ahead and do it.
I got my digitizer off ebay, interestingly I see the ones on ebay in India are twice as expensive though, I would have thought they'd be cheaper. I'd recommend just getting a digitizer and lcd in one though. Like this one:
ebayDOTin/itm/For-LG-E960-Google-Nexus-4-E960-LCD-Display-Touch-Screen-Digitizer-Black-/121465367279?pt=IN_Mobile_Accessories&hash=item1c47e66aef
Costs twice as much, but it's much easier to install; you don't need to buy as many tools, UV glue and gunk remover. Plus there's a high chance of breaking the lcd when separating it from your broken screen, so you could well end up having to buy both anyway.
I read something about the replacement lcds being lower quality though, I don't know how noticeable that would be, but if you pay with paypal you'd probably be able to get your money back.
kaligula1234 said:
Thanks, on closer inspection I htink my colours are a little washed out without the glue, so am just going to go ahead and do it.
I got my digitizer off ebay, interestingly I see the ones on ebay in India are twice as expensive though, I would have thought they'd be cheaper. I'd recommend just getting a digitizer and lcd in one though. Like this one:
ebayDOTin/itm/For-LG-E960-Google-Nexus-4-E960-LCD-Display-Touch-Screen-Digitizer-Black-/121465367279?pt=IN_Mobile_Accessories&hash=item1c47e66aef
Costs twice as much, but it's much easier to install; you don't need to buy as many tools, UV glue and gunk remover. Plus there's a high chance of breaking the lcd when separating it from your broken screen, so you could well end up having to buy both anyway.
I read something about the replacement lcds being lower quality though, I don't know how noticeable that would be, but if you pay with paypal you'd probably be able to get your money back.
Click to expand...
Click to collapse
The link is dead. But i guess the product refers to complete front panel of phone. I did same thing. The panels are China made. The quality is no where close to original. I suggest you to not buy it online. You should go to mobile repair store and ask them to do it. The reason is the panels are faulty and if so then they will quickly replace it. I did couple of time after which got a better one.

Anyone gone through front glass replacement?

Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.
wareju said:
Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.
Click to expand...
Click to collapse
The same thing happened with my friends N4. The glass, digitizer and LCD all had to be replaced as they all come as one unit. Cannot get them separately.
Amazon/ebay has parts where you can just order the LCD/Digitizer etc, but then to separate them you have to have a heat gun etc. if you touch any part by mistake you will get finger prints or smudges permanently. So not a good idea unless you are one of those super careful person. http://www.ebay.com/itm/LG-Nexus-4-...D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557
if you are handy, you can order the whole assembly online (amazon) for about 60 bucks or so) http://www.amazon.com/Touch-Screen-...r=8-1&keywords=nexus+4+lcd+screen+replacement
I personally got it replaced in So Flo for about 95 dollars + tax. I have been quoted about 140 at a chain fix up places.
bluesteve3 said:
The same thing happened with my friends N4. The glass, digitizer and LCD all had to be replaced as they all come as one unit. Cannot get them separately.
Click to expand...
Click to collapse
Sure they do. FYI, the "glass" is[ the digitizer. If "everything works", then technically all that needs replacing is the digitizer.
However, digitizer replacement is far from an easy thing to do. Not only does it require some specialist equipment (suction cups, heat gun, glue), you're probably going to screw it up unless you've done it before.
wareju said:
Recently got a GS5 and my mom doesn't have a phone right now so I'm handing my N4 down to her. The front glass is cracked and I wanted to get that fixed before I do. The digitizer and lcd are not broken, just the glass, everything else looks and functions fine. I guess what my question is, if I take it to a repair shop can they just replace the front glass or am I looking at around 100ish to replace it all? I'll be going in and getting quoted but just wanted to see if I got any input from here first, it will likely be a week or so before I take it anywhere due to this damn weather.
Click to expand...
Click to collapse
You can buy just the screen assembly off eBay for about $45, which has the digitizer already mated with the LCD. However, this requires removal from the bezel (again, a heat gun is recommended), then gluing the new one back in. For $60 you can get the entire front assembly (hey, brand new phone!), which is the easiest way to go about things. I'd also recommend buying a new battery ($20) and replacing the old, tired one while you've got the phone apart.
It's not all that difficult to do it yourself. You'll need a T5 TORX driver, something thin, sturdy and plastic to pry the phone halves apart (you can buy screen assemblies that come with all these tools), and some patience. Do everything on a fluffy white towel so the little screws don't get lost. The tricky part is the little rubber gasket thingy that goes over the proximity/light sensor module. Most people who have done a screen replacement have found that reassembly screws up the prox sensor, causing it to always read "near" (meaning during a call the screen will stay off and you can't hang up or use the dialer). The common fix is to put the gasket in backwards.
There are a number of threads here, some youtube videos, and a good teardown tutorial on ifixit.com.
I thought the digitizer was what recognized touch input? Either way I don't think I'll be doing any of this work myself, I'll just take it up somewhere for her for the repairs.
wareju said:
I thought the digitizer was what recognized touch input?
Click to expand...
Click to collapse
It is. It's built into the front panel of glass (which is made up of a bunch of different layers of stuff). Don't ask me how it works, it's all magic to me. But when you break the front glass, yet everything still works, that's the digitizer. If you look up digitizers on eBay you'll see that it's the front glass panel, with a cable and other electronic stuff attatched.
Either way I don't think I'll be doing any of this work myself, I'll just take it up somewhere for her for the repairs.
Click to expand...
Click to collapse
It's honestly not all that difficult to do yourself. Hell, send me the phone and screen assembly, and I'll do it for free. Seriously. I'll even through in a couple TPU cases I'm not using.
If you do take it somewhere for repairs, make sure you ask what they're doing. Replacing the screen assembly, or replacing the digitizer. For a $100 fee, it could be either. They could buy a $20 digitizer and the remaining $80 is in labor, but it'll take them a lot of time and effort, or it could be a $45/$60 screen assembly that takes far less time and effort to do. Personally, it costing the same, I'd rather have the screen assembly replaced, since replacing only the digitizer can lead to complications. Since it has to be reglued onto the LCD, you might get bubbles, dust/lint, dead spots, and that rainbow affect when you hold it in the light at the right angle.

Broken screen

Unfortunately my screen broke, the LCD is working fine, and recognizes touches.
Is it possible to change only the glass and digitizer? Eg
I'm afraid of LCD panels from eBay. The service said that warranty is void at all events (even if they repair it).
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
I will order a complete LCD panel with frame and try to replace myself. But I don't know if they are the same quality as original.
erikieperikie said:
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
Click to expand...
Click to collapse
Let us know when you do! Please also specify which replacement you bought. It's a good idea to document these things, because in the coming years many more people will break their screens, unfortunately, but we can help them finding out what screens are worth buying.
I'm especially interested in touch performance and LCD similarity to the original. If you could pay attention to those properties and comment on them when you know, that would be really helpful.
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
billysam said:
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Click to expand...
Click to collapse
Sec0nd said:
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
Click to expand...
Click to collapse
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
billysam said:
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Click to expand...
Click to collapse
Sec0nd said:
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
Click to expand...
Click to collapse
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
I found several glass with digitizer on eBay: https://www.ebay.com/sch/i.html?_fr...RS0&_nkw=Xiaomi+A1+touchscreen+glass&_sacat=0
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
I love advices like that.U r smart.
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Roykooiman said:
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Click to expand...
Click to collapse
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Localhorst86 said:
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Click to expand...
Click to collapse
I've contacted a local repair shop and said they couldn't do only the digitizer, but they can do the whole LCD repair which will cost me 25 euro. Now I have to find the right one..... as you have so much variant on Ebay and Alie. U have a suggestion on which one to choose?
My MI A1 display is craked .but display is working and phone functions are working .just I ask you if I using the craked display for long time is it problem come.phone sold 3 days ago so I cannot want to repair the lcd. .Plz advice
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
erikieperikie said:
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
Click to expand...
Click to collapse
Do buttons light work ?
NITRO_100 said:
Do buttons light work ?
Click to expand...
Click to collapse
Yes! See attached images. The LED also works, but isn't on in the pictures.
erikieperikie said:
Yes! See attached images. The LED also works, but isn't on in the pictures.
Click to expand...
Click to collapse
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
NITRO_100 said:
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
Click to expand...
Click to collapse
I didn't know that! It wouldn't have been bad, because I don't like the button backlight at all: it's on for too short, it's too bright, it's not like I can't find the buttons and it's not like I don't know what functions the buttons have... I hope we can turn it down or off in the stock ROM in the future!

Categories

Resources