Database Users

Dropped my precious HD2 ... doh!

Hey guys,
Just got out the car, fell over the cat and my HD2 has slipped from my top pocket and slammed screen down into the concrete driveway, doh! The screen is obliterated with cracks ... however
1. The picture is 100% clear/fine
2. The touchscreen works 100%
Can I just replace the top glass cover/screen, or is it an all in one combined unit? Im confident with electronics, just wish to know the answer before part hunting and stripping the device.
Cheers
Mike

Vapourmike said:
Hey guys,
Just got out the car, fell over the cat and my HD2 has slipped from my top pocket and slammed screen down into the concrete driveway, doh! The screen is obliterated with cracks ... however
1. The picture is 100% clear/fine
2. The touchscreen works 100%
Can I just replace the top glass cover/screen, or is it an all in one combined unit? Im confident with electronics, just wish to know the answer before part hunting and stripping the device.
Cheers
Mike
Click to expand...
Click to collapse
I would call HTC. They are good on their prices when it comes to fixing stuff that is out of warranty. A guy I knew got his Nexus One screen replaced for $90.

ap3604 said:
I would call HTC. They are good on their prices when it comes to fixing stuff that is out of warranty. A guy I knew got his Nexus One screen replaced for $90.
Click to expand...
Click to collapse
Problem is, I cannot afford to be without my phone, the phone is still usable its just difficult to read through the cracks, the image and touchscreen still work perfect, it's as if another layer of glass sits overtop.
Im 100% confident in stripping electronics etc, was just after a quick answer as to whether anyone knew if this was likely to be an entire screen or just a digitizer, if no one knows I will just strip it down tomorrow when I can get to my T drivers.

check out this vid on dissembling the hd2 - you might find your answer there..hope it helps
http://www.crunchgear.com/2010/03/02...g-the-htc-hd2/

look on craigslist. a lot of shady places replace your broken screens for cheap

Moschino02 said:
check out this vid on dissembling the hd2 - you might find your answer there..hope it helps
http://www.crunchgear.com/2010/03/02...g-the-htc-hd2/
Click to expand...
Click to collapse
http://www.crunchgear.com/2010/03/02/official-htc-step-by-step-video-for-disassembling-the-htc-hd2/

mrroey said:
look on craigslist. a lot of shady places replace your broken screens for cheap
Click to expand...
Click to collapse
I'm happy to repair myself as I see no reason to pay someone money when I work with electronics daily and I can locate parts easily, just need to know if its the digitizer or the LCD that's broken without pulling the device apart.
Also, thank you for the link above, will give that a look now, I really think it's just the top digitizer as the screen still shows a crystal clear image, the backlight works fine and the touchscreen works too, its just badly cracked.

This happened to me (apart from the cat), however it seems you got lucky, the LED screen decided to break, has all funny white lines over it but the glass is perfect.
^^ As far as going to fix it your self is concerned, I would have tried myself, however I just know with my luck that something would go wrong and it wouldnt work D:

I usually go via the DIY route but I've seen too many stories where HD2 repairs have gone horribly wrong. It seems that replacing one part is fairly straightforward but avoiding damage to others is not. I'm sure that as miniaturization continues repairs, even by talented amateurs, will become impossible.

It's your digitizer. It's available online. Just make sure you get the right one for your country. TMO-US uses a different one than everywhere else, I believe. Also, watch the video linked above. The digitizer removal I hear is somewhat tricky. Good luck!

Hi there and hello from Croatia!well,i must say changing digitizer on hd2 aint easy.lcd is glued with some special glue type and after you glue them up u need to glue digitizer for housing,for that im using ebay double sided iphone 3m tape but it is not strong enough.as for the hardware inside u ned to be 100% concentrated on this cuz flat for keypad is 30$...digitizer around 50$...chinese resellers with good quality.good luck!

[Q] I cracked my digitizer....hard to replace?

So I was pretty careless and dropped my N1 in work, landing perfectly on it's screen It still functions perfectly and the AMOLED screen hasn't been damaged, simply the digitizer. I've already ordered a new one with all the tools necessary to replace it, but I'm yet to find any definitive guide on replacing the N1 digitizer.
I came across thread #751923 (Can't post links as I'm new) which seems really helpful but a guide with pictures/video would be awesome. There's a 45 step youtube vid on how to replace it as well but the quality/clarity isn't great. I'm sure I can use both of these to replace it just fine, It just seems a little daunting.
Basically I'm looking for consolation along the lines of 'It's damn easy to fix' Any love for a fellow N1-er?

It is easy to fix. Two tips: don't use metal spatulas to pry the plastic under the battery off and gently wiggle and push the motherboard out only after disconnecting all the little connectors on it.

Im also waiting on my digitizer. I'm going to folllow these 2 guides.
http://www.ifixit.com/Teardown/Nexus-One-Teardown/1654/1
http://cnn.cn/shop/google-nexus-digitizer-p-8252.html

Have done it and you actually found better tear-downs and tutorials. Use youtube as well. The videos help because they show the techniques as well. Hardest part i would have to say is sliding the motherboard out the bottom under the metal separator. I think it was great and taught me a lot about my phone. The thing you have to watch out for is dust and fingerprints under the screen. Once it's on...it's on, anything underneath is stuck lol. make sure it's all clean and you won't have any annoyances like dust particles like i have.

I did it, mostly successful. I damaged the cable to the trackball, so be careful at that step, otherwise nothing difficult, just takes an hour or so.

Cheers for the info and advice guys, should hopefully get my replacement digitizer tomorrow so I'll keep this thread updated with the outcome

I have replaced my digitizer. It cost me $45.00. It was challenging but not impossible. The hardest thing is not tearing any of the ribbons when dissasembling. It was a successful replacement. The only gripe I had was the digitizer I bought did not come with the adhesive to glue the digitizer to the frame. Make sure you have a way to attach the screen to the frame before you begin the process. Other than that it should be easy as long as you take your time.
Sent from my Nexus One using XDA App

I replaced mine.. it took a solid hour or so, just be very careful not to tear any of the ribbon cables.. everything is super small and delicate.
I now get lots of dust in the corners of my screen because i didn't seal the new digitizer properly, but its not a huge deal to me.

replacing the digitizer is easy... its taking apart, and putting the rest back together that sucks. just make sure you know what length screw goes in what hole... very important. take notes as you disassemble.

nexusonemeover said:
just make sure you know what length screw goes in what hole... very important. take notes as you disassemble.
Click to expand...
Click to collapse
haha reminds me of when I took my laptop apart to re apply thermalpaste. I ended up with 7 extra screws >.< But the thing was together and has been running fine for the last 6 months so O.O

I did it, not too bad if you go slow and deliberately. I also have dust under my screen now. I sort of wish I would have just sent it to HTC but the money saved is worth a little dust.

A useful tip for disassembling is to cut out a paper template the same shape as your N1 and push the screws through it in positions corresponding to the screw holes in your N1. Its much easier to figure out where they all go when you come to reassembling it, just dont knock your template and screws on the floor .

rob61280 said:
A useful tip for disassembling is to cut out a paper template the same shape as your N1 and push the screws through it in positions corresponding to the screw holes in your N1. Its much easier to figure out where they all go when you come to reassembling it, just dont knock your template and screws on the floor .
Click to expand...
Click to collapse
That's a great idea, rob. I always think whenever I take apart a phone that I should have a video camera handy to record what I'm doing so I can play it in reverse when I'm putting it back together

For $115 you can send your phone back to HTC and have a QUALIFIED technician replace your screen.
Yes, it's a little more but you don't have to worry about messing anything else up and you're getting back your phone without any installation flaws.

Well I eventually got my digitizer this morning. It took until I had everything taken apart to realise they had sent me a compatible but ill fitting digitizer. It doesn't even have the appropriate buttons (it did in the selling image) at the bottom. At this point everything works fine but it doesn't look perfect. I guess it'll have to do, thanks for the advice guys

omgdwong said:
For $115 you can send your phone back to HTC and have a QUALIFIED technician replace your screen.
Yes, it's a little more but you don't have to worry about messing anything else up and you're getting back your phone without any installation flaws.
Click to expand...
Click to collapse
Wow thats cheap, I just got quoted for around $300US to fix my phones screen.. not including labor.. argh
Does anyone know if HTC in america repair phones from the other side of the world even though they were purchased from google's store?

I just sent my phone into HTC to be repaired for a cracked screen expecting it to be $115 and was pleasantly surprised to find that it would only be $55 including shipping! HTC was also extremely quick to get back with me for the quote. I sent the phone out Tuesday at 4pm and they have looked at it and quoted me the repair cost by Wednesday at 2 pm.

I recently cracked my digitalizer as well.
I called HTC 2 times without giving any information about myself before calling a 3rd time to do the actual swap.
I was quoted at $115 for me to send in my N1, wait a week without a phone, and have them replace the digitalizer, before shipping it back.
I then further inquired and found out they have a Swap program where they mail you a new(refurbished, but perfect) phone, and a FedEx label, which they still quoted me $115 to fix the screen, and a possible $275 if they needed to replace the logicboard, but they would get a quote back to me with all the things they would need to replace. It would require a $529 charge to my card, incase i didnt send the phone back at all.
I mentioned that my camera was broken, as well as my trackball was loose, and he said the quote would include this as well.
I called back a 3rd time, requested a swap phone, and had one 2 days later.
i mailed my phone into HTC, and two days later i had my quote.
I paid $55 after it was said and done, and have a new (refurbished) phone
I was rooted,unlocked, and running Kang-O-Rama 1.0 when i shipped the phone in. I didnt bother to fix that.

[Q] Cracked screen. Best option.

Ok folks, there's probably a thread on this somewhere, but I haven't found it yet, and frankly I've got plenty to do as it is, so forgive me for not making a thorough search.
Anyhow, I've managed to crack the screen just above the home and app buttons, which is a pain, but **** happens. I've noticed that on eBay the screen + LCD combo is around A$140 while the front glass alone is only A$27. Now, since the Lcd isn't damaged, that kinda looks awesome, right? Except, I haven't found any instructions on how to replace the front glass alone with out ****ing with the LCD too. Anyone know?
Plenty of vids on YouTube on how to change the combo, which is a bit of a pain in the arse compared to other phones. All I want to change is the glass. Any help would be much appreciated.

WestAussie said:
Ok folks, there's probably a thread on this somewhere, but I haven't found it yet, and frankly I've got plenty to do as it is, so forgive me for not making a thorough search.
Anyhow, I've managed to crack the screen just above the home and app buttons, which is a pain, but **** happens. I've noticed that on eBay the screen + LCD combo is around A$140 while the front glass alone is only A$27. Now, since the Lcd isn't damaged, that kinda looks awesome, right? Except, I haven't found any instructions on how to replace the front glass alone with out ****ing with the LCD too. Anyone know?
Plenty of vids on YouTube on how to change the combo, which is a bit of a pain in the arse compared to other phones. All I want to change is the glass. Any help would be much appreciated.
Click to expand...
Click to collapse
use a hairdryer for loosening the adhesive to separate glass and digitizer , being patient is the key but there is a good chance of messing it up

It was my understanding that the screen assembly was next to impossible to disassemble without damaging the other layers of the screen. It seems hard enough to separate from its housing I can't imagine the difficulty in de-laminating the glass from the digitizer/LCD.
I just replaced my front with the combo part from etradesupply it was pretty expensive but 0 hassle. A couple of screws later and I moved to the old main board to the new front part... No heating no heavy prying.
Good luck with your fix.
P

pietro_spina said:
It was my understanding that the screen assembly was next to impossible to disassemble without damaging the other layers of the screen. It seems hard enough to separate from its housing I can't imagine the difficulty in de-laminating the glass from the digitizer/LCD.
I just replaced my front with the combo part from etradesupply it was pretty expensive but 0 hassle. A couple of screws later and I moved to the old main board to the new front part... No heating no heavy prying.
Good luck with your fix.
P
Click to expand...
Click to collapse
Didn't you have to heat the battery to move it when you did the swap? My fear is ill damage one of those wafer thin ribbon cables in the process too. Just looks like a mission of a job from the vid I watched on YouTube. Would hate know how much a tech guy would charge though.
Sent from my Nexus 4 using xda app-developers app

WestAussie said:
Didn't you have to heat the battery to move it when you did the swap? My fear is ill damage one of those wafer thin ribbon cables in the process too. Just looks like a mission of a job from the vid I watched on YouTube. Would hate know how much a tech guy would charge though.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Mine had a battery.
This is the part I bought.
OEM LG Nexus 4 E960 LCD Screen and Digitizer Assembly with Front Housing and Battery
from this page (they ship out of Hong Kong)
http://www.etradesupply.com/lg/android-models/lg-nexus-4-e960-parts.html but it appears to be out of stock now. (Maybe I got the last one)
Like I said, it was pricey, but i couldn't risk me screwing it up further since I run my architecture firm with this phone. I was looking for a minimal down time solution because the alternative for me was just buy a new phone in a retail store the next day. Not having access to the lower parts of my screen was seriously limiting. I slogged away for a week using all sorts of work-arounds to activate the dial pad, use parts of the keyboard etc while I waited for the replacement part.
This guy http://www.youtube.com/watch?v=AZDAIgwbXk4 does not show the heating stage but he is so freaking calm, it can't be that bad... Do remove the main board before prying on the battery if you go that route...
-p

I just want to add, for anyone finding this thread, that the part I got from etradesupply.com has some pretty obvious yellowing of the screen. This screen was either removed from someone else's n4 because of this defect or taken from the reject bin at the factory.
In the future if I have any breaks, I will sent it to an LG facility.

Does anyone know of another place to buy the front screen with housing? It is OOS at etradesupply....

Just saw this one posted. I have not used them.
http://www.globaldirectparts.com/LG-Nexus-4-s/20969.htm

pietro_spina said:
Just saw this one posted. I have not used them.
http://www.globaldirectparts.com/LG-Nexus-4-s/20969.htm
Click to expand...
Click to collapse
Thanks... looks like mixed reviews about this company, though.

S4 Front Glass Replacement

I've bought an s4 dead cheap 2nd hand and it works fine except the adhesive glue underneath the glass hasn't set properly giving this strange wavy effect around the outside.
Like I said the digitizer works fine so all I really need to do is take the glass off, clear the glue off and replace it with new adhesive. The problem is I don't think it's possible to get hold of Gorilla Glass so what's the best alternative? Is there a 'almost as good as Gorilla' type of glass for sale somewhere or are they all the same? One of the things I love about my nexus 4 is how smooth the glass so giving that up kind of sucks. Also what adhesive should I be using? Someone told me I might be able to double sided tape instead of glue, would that be a possibility?
If anyone has any experience with and wants to share some info that would be great!

Take a look this video -> HERE. You have the materials used in the description :highfive:

s4 glass
Joku1981 said:
Take a look this video -> HERE. You have the materials used in the description :highfive:
Click to expand...
Click to collapse
Hi I would take it to a local repair shop won't cost much and get a professional job done

feckineck said:
Hi I would take it to a local repair shop won't cost much and get a professional job done
Click to expand...
Click to collapse
Good choice :highfive:

Taking off the external "screen" is tricky and risky.Ive seen the guy in Jokus video link doing an s2 before, but youll notice hes replacing the whole thing (which costs £150+).
In another video, a guy manages to change the piece your on about, but he admits he ballsd up his 1st attempt...so he needed the whole screen....lol
Also it looked like you dont get any stuff to stick the screen down with the new part, as the guy used the existing tape.

Oneplus Two Screen replacement

I broke my OPT screen when I dropped the phone. I ordered a replacement screen on ebay and disassembled the OPT using videos I found on the internet. The OPT was relatively easy to take apart.
The replacement screen arrived. When trying to place the replacement screen into the frame, I noticed that it lacks the glue on the edge of the screen to attach to the frame.
Any ideas on how I can attach the replacement screen on to the frame? Is there any glue that I can buy? Or will regular glue like super glue(permanent glue) work? Just don't want to risk damaging the replacement screen.
Any ideas?

vishnumrao said:
I broke my OPT screen when I dropped the phone. I ordered a replacement screen on ebay and disassembled the OPT using videos I found on the internet. The OPT was relatively easy to take apart.
The replacement screen arrived. When trying to place the replacement screen into the frame, I noticed that it lacks the glue on the edge of the screen to attach to the frame.
Any ideas on how I can attach the replacement screen on to the frame? Is there any glue that I can buy? Or will regular glue like super glue(permanent glue) work? Just don't want to risk damaging the replacement screen.
Any ideas?
Click to expand...
Click to collapse
Dont use glu you should be able to find adhesive strips on eBay or somewhere online

ki11aprime said:
Dont use glu you should be able to find adhesive strips on eBay or somewhere online
Click to expand...
Click to collapse
Thanks for your reply. Anything in particular that you recommend? A link will help me.
If I order online its going to take alteast a week to ship and receive it. There is some urgency to fix my phone. I need to fix it up before an upcoming trip on this Sunday.
What will happen if I use superglue to attach the screen to the frame? Will it damage the screen?
Vishnu

vishnumrao said:
Thanks for your reply. Anything in particular that you recommend? A link will help me.
If I order online its going to take alteast a week to ship and receive it. There is some urgency to fix my phone. I need to fix it up before an upcoming trip on this Sunday.
What will happen if I use superglue to attach the screen to the frame? Will it damage the screen?
Vishnu
Click to expand...
Click to collapse
Never use superglue.
Sent from my ONE A2003 using Tapatalk

vishnumrao said:
Thanks for your reply. Anything in particular that you recommend? A link will help me.
If I order online its going to take alteast a week to ship and receive it. There is some urgency to fix my phone. I need to fix it up before an upcoming trip on this Sunday.
What will happen if I use superglue to attach the screen to the frame? Will it damage the screen?
Vishnu
Click to expand...
Click to collapse
I'm sure what kind to look for but they are all over eBay and for superglu I'm not sure what will happen but I'm sure there a reason why they don't use it in the first place

Hello all, I went to a local store that repairs phones. I asked to if they would sell double sided tape and offered to pay a nominal fee. They were kind enough to give me a few and at no charge. With this I have put back my phone in working order.

In how much did you got your replacement screen???, I also broke my opt, it's easy
In how much did you got your replacement screen???, I also broke my opt, it's easy to replace glass??? I have seen videos on YouTube

drpratik97 said:
In how much did you got your replacement screen???, I also broke my opt, it's easy to replace glass??? I have seen videos on YouTube
Click to expand...
Click to collapse
Sorry, have not been on xda in a while. I paid about 25 USD on ebay.
Its pretty easy to replace. Takes a lot of patience.

Since the thread has been revived already, I'll drop in my $0.05 since I just replaced my screen last week
* The assembly/disassembly is fairly easy following video tutorials, it's not even necessary to remove all parts if you're careful with the heat.
* Remember to move the fingerprint sensor, the glued-on touch buttons and the phone speaker cover on top to the new screen.
* As always, you need to be patient when heating and ungluing the old screen from the frame (luckily it's glued only on the borders).
* I got my screen from aliexpress just under $20. Couldn't find any difference between it and the original one.
* As previous posters said, do not use any cyanoacrylate glues (superglue, etc), they leave white stains on the glass.
* I was also surprised by no glue on the frame I didn't have time to order adhesive strips, used a really thin layer of silicone adhesive, worked well and there are no gluing signs.

quezak said:
Since the thread has been revived already, I'll drop in my $0.05 since I just replaced my screen last week
* The assembly/disassembly is fairly easy following video tutorials, it's not even necessary to remove all parts if you're careful with the heat.
* Remember to move the fingerprint sensor, the glued-on touch buttons and the phone speaker cover on top to the new screen.
* As always, you need to be patient when heating and ungluing the old screen from the frame (luckily it's glued only on the borders).
* I got my screen from aliexpress just under $20. Couldn't find any difference between it and the original one.
* As previous posters said, do not use any cyanoacrylate glues (superglue, etc), they leave white stains on the glass.
* I was also surprised by no glue on the frame I didn't have time to order adhesive strips, used a really thin layer of silicone adhesive, worked well and there are no gluing signs.
Click to expand...
Click to collapse
are you talking about whole screen or just outer glass?

chxei said:
are you talking about whole screen or just outer glass?
Click to expand...
Click to collapse
Glass with the LCD. I think replacing only the glass would be very hard, if even possible without proffessional tools.

quezak said:
Glass with the LCD. I think replacing only the glass would be very hard, if even possible without proffessional tools.
Click to expand...
Click to collapse
so that lcd is as good as original one? can you link me?

chxei said:
so that lcd is as good as original one? can you link me?
Click to expand...
Click to collapse
It certainly looks the same, both internally and running on the phone, compared to my gf's OP2 which still has the original screen.
I bought this one, but I guess all the aliexpress screens are the same

I dropped my phone too sadly. Contacted the local repair centre and they said I do need to replace outer screen and the digitizer. And the process is more than $100 if I convert it.
In Alixpress just about $5 for the outer screen. Do I need to replace both or just the outer screen?

thehackersz said:
I dropped my phone too sadly. Contacted the local repair centre and they said I do need to replace outer screen and the digitizer. And the process is more than $100 if I convert it.
In Alixpress just about $5 for the outer screen. Do I need to replace both or just the outer screen?
Click to expand...
Click to collapse
I don't think changing just the glass is a good idea, I think there was video of a guy trying and braking everything. Just like the guy before said buy a screen for $20 and follow a guide. I also broke mine, but ordered a screen + frame for $50 because I thought it would be easier to just move the hardware.

https://www.ebay.com/itm/Double-Sid...642287?hash=item3aeaef1d2f:g:HsIAAOSwEBxZbHWp
Adhesive for screen. I've changed my screen twice.. Mr. Sloppy hands -.-