S4 Front Glass Replacement - Galaxy S 4 Q&A, Help & Troubleshooting

I've bought an s4 dead cheap 2nd hand and it works fine except the adhesive glue underneath the glass hasn't set properly giving this strange wavy effect around the outside.
Like I said the digitizer works fine so all I really need to do is take the glass off, clear the glue off and replace it with new adhesive. The problem is I don't think it's possible to get hold of Gorilla Glass so what's the best alternative? Is there a 'almost as good as Gorilla' type of glass for sale somewhere or are they all the same? One of the things I love about my nexus 4 is how smooth the glass so giving that up kind of sucks. Also what adhesive should I be using? Someone told me I might be able to double sided tape instead of glue, would that be a possibility?
If anyone has any experience with and wants to share some info that would be great!

Take a look this video -> HERE. You have the materials used in the description :highfive:

s4 glass
Joku1981 said:
Take a look this video -> HERE. You have the materials used in the description :highfive:
Click to expand...
Click to collapse
Hi I would take it to a local repair shop won't cost much and get a professional job done

feckineck said:
Hi I would take it to a local repair shop won't cost much and get a professional job done
Click to expand...
Click to collapse
Good choice :highfive:

Taking off the external "screen" is tricky and risky.Ive seen the guy in Jokus video link doing an s2 before, but youll notice hes replacing the whole thing (which costs £150+).
In another video, a guy manages to change the piece your on about, but he admits he ballsd up his 1st attempt...so he needed the whole screen....lol
Also it looked like you dont get any stuff to stick the screen down with the new part, as the guy used the existing tape.

Related

Dropped my precious HD2 ... doh!

Hey guys,
Just got out the car, fell over the cat and my HD2 has slipped from my top pocket and slammed screen down into the concrete driveway, doh! The screen is obliterated with cracks ... however
1. The picture is 100% clear/fine
2. The touchscreen works 100%
Can I just replace the top glass cover/screen, or is it an all in one combined unit? Im confident with electronics, just wish to know the answer before part hunting and stripping the device.
Cheers
Mike
Vapourmike said:
Hey guys,
Just got out the car, fell over the cat and my HD2 has slipped from my top pocket and slammed screen down into the concrete driveway, doh! The screen is obliterated with cracks ... however
1. The picture is 100% clear/fine
2. The touchscreen works 100%
Can I just replace the top glass cover/screen, or is it an all in one combined unit? Im confident with electronics, just wish to know the answer before part hunting and stripping the device.
Cheers
Mike
Click to expand...
Click to collapse
I would call HTC. They are good on their prices when it comes to fixing stuff that is out of warranty. A guy I knew got his Nexus One screen replaced for $90.
ap3604 said:
I would call HTC. They are good on their prices when it comes to fixing stuff that is out of warranty. A guy I knew got his Nexus One screen replaced for $90.
Click to expand...
Click to collapse
Problem is, I cannot afford to be without my phone, the phone is still usable its just difficult to read through the cracks, the image and touchscreen still work perfect, it's as if another layer of glass sits overtop.
Im 100% confident in stripping electronics etc, was just after a quick answer as to whether anyone knew if this was likely to be an entire screen or just a digitizer, if no one knows I will just strip it down tomorrow when I can get to my T drivers.
check out this vid on dissembling the hd2 - you might find your answer there..hope it helps
http://www.crunchgear.com/2010/03/02...g-the-htc-hd2/
look on craigslist. a lot of shady places replace your broken screens for cheap
Moschino02 said:
check out this vid on dissembling the hd2 - you might find your answer there..hope it helps
http://www.crunchgear.com/2010/03/02...g-the-htc-hd2/
Click to expand...
Click to collapse
http://www.crunchgear.com/2010/03/02/official-htc-step-by-step-video-for-disassembling-the-htc-hd2/
mrroey said:
look on craigslist. a lot of shady places replace your broken screens for cheap
Click to expand...
Click to collapse
I'm happy to repair myself as I see no reason to pay someone money when I work with electronics daily and I can locate parts easily, just need to know if its the digitizer or the LCD that's broken without pulling the device apart.
Also, thank you for the link above, will give that a look now, I really think it's just the top digitizer as the screen still shows a crystal clear image, the backlight works fine and the touchscreen works too, its just badly cracked.
This happened to me (apart from the cat), however it seems you got lucky, the LED screen decided to break, has all funny white lines over it but the glass is perfect.
^^ As far as going to fix it your self is concerned, I would have tried myself, however I just know with my luck that something would go wrong and it wouldnt work D:
I usually go via the DIY route but I've seen too many stories where HD2 repairs have gone horribly wrong. It seems that replacing one part is fairly straightforward but avoiding damage to others is not. I'm sure that as miniaturization continues repairs, even by talented amateurs, will become impossible.
It's your digitizer. It's available online. Just make sure you get the right one for your country. TMO-US uses a different one than everywhere else, I believe. Also, watch the video linked above. The digitizer removal I hear is somewhat tricky. Good luck!
Hi there and hello from Croatia!well,i must say changing digitizer on hd2 aint easy.lcd is glued with some special glue type and after you glue them up u need to glue digitizer for housing,for that im using ebay double sided iphone 3m tape but it is not strong enough.as for the hardware inside u ned to be 100% concentrated on this cuz flat for keypad is 30$...digitizer around 50$...chinese resellers with good quality.good luck!

[Q] Scratch removal

Hi,
after my wife dropped my phone (accidently she swears) I have some small scratches on the phone. (See Picture below)
Someone knows some ACME Cleaner&Scratch remover for that?
Greetings .. seems that I have had the HD2 for the longest time ...
OOO!! Ouch! Looks like it's time to see the phone doctor. Or, if you feel brave enough, you can fix it yourself. They have replacement screens on ebay. Since you have the EU model the contacts for the screen and the digitizer are soldered together. So you have 3 options. 1. Take it to someone else to fix it. 2. Attempt to order just the digitizer and if you have some time and surgical skills solder the contacts yourself or, 3. Get a fully assembled LCD and digitizer that is already soldered together and swap them out. The cheapest would be to just get the digitizer but if you have to factor in the time and headache of soldering those tiny contacts together, I think getting the assembled parts would be my choice. The US T-Mobile model has a small plug-in type connector on it so there is not soldering. I replaced mine and it is quite a chore. You have to be very careful and don't rush it or you will break things. Good luck!
Yeah you've got more than scratches there! You've got a smashed screen
You'll have to replace the glass
the guy above stated pretty much everything you need to know but here's a link to a lcd+digitizer combo that is fairly cheap: http://www.ebay.com/itm/New-LCD-Dis...192999?pt=PDA_Accessories&hash=item45fdf14d27
I know guys, the scratches where just kidding
The complete replacement has been ordered already, will fix it by myself
RollerCoasting said:
Yeah you've got more than scratches there! You've got a smashed screen
You'll have to replace the glass
the guy above stated pretty much everything you need to know but here's a link to a lcd+digitizer combo that is fairly cheap: http://www.ebay.com/itm/New-LCD-Dis...192999?pt=PDA_Accessories&hash=item45fdf14d27
Click to expand...
Click to collapse
He was being sarcastic with the 'scratches' thing :L
MasterMerlin said:
I know guys, the scratches where just kidding
The complete replacement has been ordered already, will fix it by myself
Click to expand...
Click to collapse
That's great. Like I said be very careful in taking it apart. Especially the flex cable that controls the volume rocker. Take your time and you can get it fixed.
Check out this website: http://pocketnow.com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
It has some videos on disassembling and assembling the HD2 just so you see what you have to deal with. Also another good investment would be to see if you can get some double sided tape to stick the back of the LCD to main frame if you can't salvage the stuff that's there already. It can't be too thick though because you'll run into problems of getting it put back together. They have that on ebay also.
yes
option one.... change screen..
option 2...change wife.....
hahaha change your wife my friend
htchd2fix said:
yes
option one.... change screen..
option 2...change wife.....
Click to expand...
Click to collapse
haha change screen is cheaper i guess

[Q] Cracked Camera Glass

Bah!
Just noticed the camera glass on the back on the phone has a nice crack through it... not sure how it happened as the phone has barely been used and never dropped!
Luckily it doesn't seem to be effecting the photos - but it is a bit of a worry and I don't want it getting worse and damaging the actual camera lens
Does anyone know of anywhere in the UK that I might be able to source a replacement part this early in the phones life cycle?
I don't really want to get Samsung or Vodafone to fix it as I had my S3 sent back due to a manufacturing issue and didn't see the phone for another 5 weeks!!
From what I can see in the tear down videos, the camera is quite easy to get to and the glass is quite easy to remove, so I might give it a go at home...
As for the warranty - I assume this voids it, but I can't see any security seals that would let them know this had been done, am I missing something?
Thanks for your help!
Are you sure it's a crack in the glass and not just a scratch in the protective seal? I've had some bubbles under what I assumed was the glass but it turned out I just didn't remove the plastic seal that was on the real glass.
Can't help you with replacement if it's really cracked, good luck though!
bioweb said:
Are you sure it's a crack in the glass and not just a scratch in the protective seal? I've had some bubbles under what I assumed was the glass but it turned out I just didn't remove the plastic seal that was on the real glass.
Can't help you with replacement if it's really cracked, good luck though!
Click to expand...
Click to collapse
Nope, Unfortunately it's a pretty genuine crack, you can feel the two pieces shifting slightly when you gently tap the area - very frustrating
LoveJimbo said:
Nope, Unfortunately it's a pretty genuine crack, you can feel the two pieces shifting slightly when you gently tap the area - very frustrating
Click to expand...
Click to collapse
On the S3 you could remove the glass cover the lens is actually further back in the housing, try this video see if it works the same on the S4.
Cant help with a replacement part but at least you can remove it and order one espares once they become available.
Ah that's a good idea!
Before I start hacking away at it to check, does anyone have an S3 and S4 and could compare the camera housing by eye - just to see if they do look like they are built in a similar way?
Thanks for your help!
Jim
LoveJimbo said:
Ah that's a good idea!
Before I start hacking away at it to check, does anyone have an S3 and S4 and could compare the camera housing by eye - just to see if they do look like they are built in a similar way?
Thanks for your help!
Jim
Click to expand...
Click to collapse
I've just looked at my S3 and it is different appears the S4 is more intergrated theirs no natural place you could get a pin to lift it away.

[Q] Cracked screen. Best option.

Ok folks, there's probably a thread on this somewhere, but I haven't found it yet, and frankly I've got plenty to do as it is, so forgive me for not making a thorough search.
Anyhow, I've managed to crack the screen just above the home and app buttons, which is a pain, but **** happens. I've noticed that on eBay the screen + LCD combo is around A$140 while the front glass alone is only A$27. Now, since the Lcd isn't damaged, that kinda looks awesome, right? Except, I haven't found any instructions on how to replace the front glass alone with out ****ing with the LCD too. Anyone know?
Plenty of vids on YouTube on how to change the combo, which is a bit of a pain in the arse compared to other phones. All I want to change is the glass. Any help would be much appreciated.
WestAussie said:
Ok folks, there's probably a thread on this somewhere, but I haven't found it yet, and frankly I've got plenty to do as it is, so forgive me for not making a thorough search.
Anyhow, I've managed to crack the screen just above the home and app buttons, which is a pain, but **** happens. I've noticed that on eBay the screen + LCD combo is around A$140 while the front glass alone is only A$27. Now, since the Lcd isn't damaged, that kinda looks awesome, right? Except, I haven't found any instructions on how to replace the front glass alone with out ****ing with the LCD too. Anyone know?
Plenty of vids on YouTube on how to change the combo, which is a bit of a pain in the arse compared to other phones. All I want to change is the glass. Any help would be much appreciated.
Click to expand...
Click to collapse
use a hairdryer for loosening the adhesive to separate glass and digitizer , being patient is the key but there is a good chance of messing it up
It was my understanding that the screen assembly was next to impossible to disassemble without damaging the other layers of the screen. It seems hard enough to separate from its housing I can't imagine the difficulty in de-laminating the glass from the digitizer/LCD.
I just replaced my front with the combo part from etradesupply it was pretty expensive but 0 hassle. A couple of screws later and I moved to the old main board to the new front part... No heating no heavy prying.
Good luck with your fix.
P
pietro_spina said:
It was my understanding that the screen assembly was next to impossible to disassemble without damaging the other layers of the screen. It seems hard enough to separate from its housing I can't imagine the difficulty in de-laminating the glass from the digitizer/LCD.
I just replaced my front with the combo part from etradesupply it was pretty expensive but 0 hassle. A couple of screws later and I moved to the old main board to the new front part... No heating no heavy prying.
Good luck with your fix.
P
Click to expand...
Click to collapse
Didn't you have to heat the battery to move it when you did the swap? My fear is ill damage one of those wafer thin ribbon cables in the process too. Just looks like a mission of a job from the vid I watched on YouTube. Would hate know how much a tech guy would charge though.
Sent from my Nexus 4 using xda app-developers app
WestAussie said:
Didn't you have to heat the battery to move it when you did the swap? My fear is ill damage one of those wafer thin ribbon cables in the process too. Just looks like a mission of a job from the vid I watched on YouTube. Would hate know how much a tech guy would charge though.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Mine had a battery.
This is the part I bought.
OEM LG Nexus 4 E960 LCD Screen and Digitizer Assembly with Front Housing and Battery
from this page (they ship out of Hong Kong)
http://www.etradesupply.com/lg/android-models/lg-nexus-4-e960-parts.html but it appears to be out of stock now. (Maybe I got the last one)
Like I said, it was pricey, but i couldn't risk me screwing it up further since I run my architecture firm with this phone. I was looking for a minimal down time solution because the alternative for me was just buy a new phone in a retail store the next day. Not having access to the lower parts of my screen was seriously limiting. I slogged away for a week using all sorts of work-arounds to activate the dial pad, use parts of the keyboard etc while I waited for the replacement part.
This guy http://www.youtube.com/watch?v=AZDAIgwbXk4 does not show the heating stage but he is so freaking calm, it can't be that bad... Do remove the main board before prying on the battery if you go that route...
-p
I just want to add, for anyone finding this thread, that the part I got from etradesupply.com has some pretty obvious yellowing of the screen. This screen was either removed from someone else's n4 because of this defect or taken from the reject bin at the factory.
In the future if I have any breaks, I will sent it to an LG facility.
Does anyone know of another place to buy the front screen with housing? It is OOS at etradesupply....
Just saw this one posted. I have not used them.
http://www.globaldirectparts.com/LG-Nexus-4-s/20969.htm
pietro_spina said:
Just saw this one posted. I have not used them.
http://www.globaldirectparts.com/LG-Nexus-4-s/20969.htm
Click to expand...
Click to collapse
Thanks... looks like mixed reviews about this company, though.

[Q] Dust under new glass replacement, how can I remove it?

Just got a few weeks ago my I9505 from a repair centre.. I cracked it's glass and got a replacement for around $40.
I can clearly see a lot of dust under the glass, above home button. I think it also penetrated below back button.
The touch works fine in the rest of the screen, only in the parties mentioned above it doesn't, works hard sometimes.:crying:
My question is: Can I remove the dust without cracking the glass? I don't want to buy a new one..
I heard that you can heat it with a hair dryer and pick just the glass up without cracking with metal tweezers..
crystybz2010 said:
Just got a few weeks ago my I9505 from a repair centre.. I cracked it's glass and got a replacement for around $40.
I can clearly see a lot of dust under the glass, above home button. I think it also penetrated below back button.
The touch works fine in the rest of the screen, only in the parties mentioned above it doesn't, works hard sometimes.:crying:
My question is: Can I remove the dust without cracking the glass? I don't want to buy a new one..
I heard that you can heat it with a hair dryer and pick just the glass up without cracking with metal tweezers..
Click to expand...
Click to collapse
Well i suppose you didn't go to the official service of samsung because if you have gone, your service would cost 160$. So it's a second man job. You can go and tell him to restick the glass only or you can search on YouTube for a tutorial to do it by yourself... I prefer the second one. I don't trust anyone, only me!
Cpsil said:
Well i suppose you didn't go to the official service of samsung because if you have gone, your service would cost 160$. So it's a second man job. You can go and tell him to restick the glass only or you can search on YouTube for a tutorial to do it by yourself... I prefer the second one. I don't trust anyone, only me!
Click to expand...
Click to collapse
Thank you for the fast reply.. I don't have stick, I also don't know what kind of stick I need but .. Can I heat it with the hair dryer just where is dust and remove dust with a vaccuum cleaner or something?
crystybz2010 said:
Thank you for the fast reply.. I don't have stick, I also don't know what kind of stick I need but .. Can I heat it with the hair dryer just where is dust and remove dust with a vaccuum cleaner or something?
Click to expand...
Click to collapse
At first you have to go o your service guy to mention your problem. After that,
if he won't do anything, you should buy a 2 mm double sized tape from eBay. But you must be very careful. The guy who changed your screen isn't the certified one huh?

Categories

Resources