Please, its been about a month since the earpiece on my wizard died and i can't find the part anywhere! I found one damaged wizard on ebay which sold for $400 with a damaged screen! obviously a fradulent buyer but the seller hasn't replied yet.
So if your wizard is water damaged, smashed, or simply inoperable i need this one part to fix my earpiece. Also my brothers wizard's speakers are blown so it'd be great if i could get a hold of those two.
What i need is the ribbon cable which connected the main board to the top sliding half of the device. Its a ribbon cable attached to a circuit board on both ends.
Please i really need this so i can bring the phone part of my wizard back to life.
PM me if you know where i can get this part or if you have a damaged wizard.
Thanks in advance!
broken wizard!
i do have a working one with cracked screen. where are you located?
i should have mentioned that.. I'm in austin, texas. If u are over seas i can check to see if i can make it elligible for a corporate rate to ship it to me.
Also how much would u be wanted for it?
I'd offer you mine, but I got the same thing broken.
i just emailed 2 sellers on ebay which have cellphone parts and wizard housings in there stores, awaiting there reply. And i'm working something out with the one person with a damaged one from ebay.
What do you guys think $85 good for a wizard with a damaged screen?
broken wizard
I have a broken wizard--I dropped it, but I can still make calls from it via the bluetooth headset.
PM me if you are interested and I'll give you my phone #.
I've pm'd u, but does that mean your earpiece is broken as well? Cuz what i need is the ribbon cable that powers the earpiece, LCD, digitizer, softkeys, and everything else on the front half of the device. So if yours is broken then probably won't help mine out much.
i guess so. If you need an intact (front) then mine won't help--due to the fact that the "cal answer/hangup " buttons do not work.
The damaged one i bought off ebay came in today, swapped the parts out and now my earpiece is working again!! i'm so excited!!
Now i have all these parts lying around if anyone needs anything send them my way. The parts i got are:
The main board
Camera
Vibrator
Main housing (except for the front its really banged up)
Antenna
Keyboard
But no battery cover, didn't come with one.
Heres a pic of the mess i had on my desk but it all worked out perfectly
--------------------------------------------------------------------------------------------
I no longer have the damaged wizard so please don't PM asking for parts.
hey fone_fanatic, wondering if you ever experienced your Wizard creaking when you press down on the front faceplate(below the call/end buttons)....seems to come from the hinge right under the the right soft key (the one connected to the keyboard), only thing is it only makes noise when the keyboard is closed and my keyboard is not loose at all(nice and snug)....just wanted to know if you might know of a fix for my problem, would you recommend me taking it apart or just sending it in for a warranty repair or do you know if it is pretty easy to somehow shorten the gap between the front face and the keyboard?.... appreciate the time.
Regards,
P.S. My Wizard works fine, its just starting to get very annoying when I make/end phone calls.
no, mine doesn't make any noise when i press down there. well there is a noise but its coming from the battery cover. if your device is under warranty, i suggest sending it in if it bothers you that much. the reason being because when u open it up your bound to break a couple of clips which might make it worse.
fone_fanatic: I love that mess on your desk
You might want to mask out your First National Card though - edge detection filters would love that image...
V
don't worry about the card, its one of those advertisement cards you get in the mail syaing your pre-approved or whatever. i always keep those cards and use them with taking devices apart.
fro the broken units
check out this site they repair and sell repair parts
http://www.pocketpctechs.com/main~u...essories-Stylus+-+Enhanced~item~IMT-LCD03.htm
anyone got a 8125 with a cracked LCD but all other functions still working?
yes, i'm aware of pocket pc techs but they didn't have the part i needed to fix mine whihc is why i bought a damaged one and salvaged the part i needed out of it. Now i've got all these extra parts , but what to do with them...?
@ fone_fanatic
thanks for the advice....off to warranty it goes...hope it comes back with no new problems (fingers tightly crossed)....
Regards,
hey can I see that pic of the parts u got left?
I wouldnt mind buying a wizard with just a broken LCD if it was cheap. $180 to send it in to fix a LCD is super expensive when the phone is like $350 on ebay
fone_fanatic said:
yes, i'm aware of pocket pc techs but they didn't have the part i needed to fix mine whihc is why i bought a damaged one and salvaged the part i needed out of it. Now i've got all these extra parts , but what to do with them...?
Click to expand...
Click to collapse
... wait for the next thing to break? :lol:
tonydt1g3r said:
hey can I see that pic of the parts u got left?
I wouldnt mind buying a wizard with just a broken LCD if it was cheap. $180 to send it in to fix a LCD is super expensive when the phone is like $350 on ebay
Click to expand...
Click to collapse
The reason i bought it the this one with the damaged lcd is because i couldn't find the part i needed (Rigid Flex Board) anywhere so i swapped my broken one out with this one. So if i was to put this back together not only would the lcd be busted but the earpiece won't work also the speakers would be blown (sold good speakers to a friend). Also the front case is heavily scratched/dinged, looks like someone smashed a brick on the phone.
Related
yup, I fell over... which as if that wasn't painful enough, I also happened to crack the LCD on my XDA 2, which has a nice "windscreen effect" of cracked glass, and the added bonus of wrecked liquid crystal oozing out and ruining it completely.
I phoned O2 and they quoted me £160 for the repair job, but I thought it'd be worth a shot to see if there's a cheaper option, self-repair included (although I have the feeling that self-repair is night on impossible when the colours are pooched) anyhow, recommendations much appreciated.
Try www.pdatechcenter.nl
great people, answer the phone, reasonable price
They just repaired mine +++
bought the LCD replacement from a seller on eBay in taiwan, now I need to work out how to remove the black part at the top of the phone (the one with windows mobile on it)
if anyone knows how, since the service manual is a bit vague (and I'm trying it with a very small hex-key) then it'd be appreciated.
I have a just bought a broken Himalya (XDA2/Orange M1000 all the same thing) and I have no need for it. I purchased it on Ebay and the screen is in excellent condition no scratches no dead pixels and is in mint condition. I also have a PDF from HTC on how to open up the device and change it yourself. I bought it for the speaker as the speaker in my XDA2 was rattling..swapped it out and it still rattles on high volume....hence no need for it. I want the money I paid for the phone.
So for all you guys out there with a broken screen I have one.
email me
[email protected] or call me on 07709 853 073
Cheers
kevin666 said:
So for all you guys out there with a broken screen I have one.
email me
[email protected] or call me on 07709 853 073
Cheers
Click to expand...
Click to collapse
not necessarily, there are different screens that have been put into the XDA2, so whilst it might be correct for one, it won't necessarily be suitable for another
Rrrr said:
great people, answer the phone, reasonable price
Click to expand...
Click to collapse
299€ for the Blueangel LCD not in stock is reasonable ?
now I need to work out how to remove the black part at the top of the phone
Click to expand...
Click to collapse
Don't do that the way as described in service manual in pdf format downloaded somewhere from this server.
Pull the stylus,antenna connector cap and SD out,take a small flat screwdriver and carefuly prise the black cover on this places:
1.Where is the volume slider button
2.on other side below the stylus hole
The cover must easily jump out from the hooks situated below antenna connector and on the other side below the three lines on the cover. Then only pull easily other hooks on the top under the SD slot.
I recommend to put same small paper sheet under this cover when assemblying. That prevents for screech of this part in future.
Just cracked my screen today. I went searching on Ebay and saw LCD screens and a digitizer. What parts do I need? either or both?
Phone still works, just can't read anything on the screen. It lights up but its all messed up.
I'm in the US, anyone have a phone for parts?
If you think that you can do it yourself, you will have to order a new LCD component and - just to be on the save side - a digitizer as well. Your best source might be eBay. Other than that, the Hermes really dropped in price, so, if you want to stick with a Hermes, try to get you a new one on eBay and keep your broken one for parts.
NO!!!!!!! You just need the LCD. Make sure it has the digitizer ALREADY on it. Save some $$ and some stuffing around with a possible failure.
In Oz I can get 1 for less than $100. You should be able to get them cheaper depending where you are in the world.
When you get the LCD/digitizer combo then use the Hermes HTC Service manual to pull apart your Hermes and put back together. You'll also need a size 6 torque key, a smll flatblade screwdriver and a small philips head screwdriver.
Take the steps 1 at a time and if you don't understand something then reread until you do.
When you put back together watch out for the camera focus and the battery access latch. If you don't line up the camera focus switch with the swich on the back cover you will have problems and if you put the battery latch on the wrong way you're not gonna be able to get the battery cover off easily.
Cheers...
Thanks for the advice. I'mgoing to try to do this myself and save a few bucks. I checked local repair shops and they want $120 to repair.
I haven't seen any LCD's that mention they have the digitizer with it. Is there a way to tell? Otherwise, I'll see what I can find.
ultramag69 said:
NO!!!!!!! You just need the LCD. Make sure it has the digitizer ALREADY on it. ...
Click to expand...
Click to collapse
LOL,
So, he needs the digitizer!
Yes Junner2003, but you DON'T buy it separately... That is a MAJOR pain in the neck. Its almost impossible to attach properly.
The LCD should come with the digitizer attached. Ask the seller if it is. If they say "no" then go elsewhere. There's no point in saving a few bucks on an LCD that may not be made to work properly.
Thanks for that tip. I found one with the digitizer so I'm crossing my fingers.
Well I dropped my G1 the other day and it busted the outer glass part. The LCD is fine and it still works perfect. I have looked everywhere,with no luck of finding any parts for them. So I called HTC and they told me 150-250 to replace the glass!! So I was wondering if any one know anyone that does G1 Repair or if anyone know of another phone that has more ava. parts for it with a 3.17" Screen? Any help is greatly appreciated.
Nope, I got AT&T. Was thinking of taking apart the phone and getting the glass measurements and having a custom cut piece of glass.
i believe its a special type of glass
Pretty much stuck buying the glass from HTC on this one ...sorry
PS... it is glass
iphone 3g - Dream lcd
I read that the same screen is in use on the iphone 3g, I doubt its true they probably meant type or sumthin, maybe worth a check...
on the old palm pdas you could replace just the glass if the layer under it isn't damaged, this may no longer be possible with these screens, once the bigtime flashing begins there will be lots of bricks available pretty cheap, maybe you should keep an eye out for somebody who pooched the dev bootloader install then after you convince them they killed it you could buy it maybe for less than the HTC price...
gotta say, that sucks if you were a tmob customer you'd have a few options...
bhang
Hello. Don't you think It's weird that it happened to me too today?
I've never had a broke phone since my Nokia 8210.
Well, some idiot had placed out one of those kinds of plastic bands you use to seal packages with, a black one.
It was pitch dark and I fell as the plastic ring got snared around my feet. Obviously my Jabra bt3030 got pushed against the screen and it got severely cracked.
My insurance company seems to be covering the whole phone except a small sum. This was from the phone part, but I got to see if I can get something from the health insurance as I hit my head and scratched my hand (though not likely but I can always try)
The touch seems to work most of the time, though it reacts slowly but some times It's just dead.
This really sucks.
I'm dead serious when I'm talking that there was no way that the band could be seen when walking.
http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226&view=unread
Some info there.
aad4321 said:
yeah i dont think it is really even "glass" mabye its a type of plexiglass?
Click to expand...
Click to collapse
It is glass. But you can not simply cut a piece of glass to the same dimension as the touchscreen is integrated into the glass cover. So yes you will need to get a htc or aftermarket replacement part.
The interesting thing is that the repair cost you quoted is identical to the cost of the copay if you go with the Asurion device insurance T-mo offers. So device insurance would just be a waste of money at $5 a month if you end up with broken glass.
Looks like I will just have to hold onto it until aftermarket parts come out. I busted mine by letting it slip out of my hand while talking on it....then it took a 6ft fall to eventually land face first on concrete.....I didnt even wanna pick it up cause i new it was messed up and if it wasnt I was gonna call HTC and give them props! I have a ava. upgrade from AT&T Maybe get a Iphone until this one gets fixed then sale iphone on ebay for 5x wuts its worth.
The iphone's screen seems to crack pretty nice as well.
I hope changing the glass on the G1 isn't as frustrating as on the Iphone.
http://www.youtube.com/watch?v=sT7wRXeYsyg
edit:
Not directing this to the message above, just saying.
Cracked screen replacement with compatible HW from third party --when?
I cracked the LCD of my G1 after about three weeks and have noted that neither PPCTechs nor MobileKangaroo have yet acquired a source for the replacement screen.
My understanding is that HTC currently charges what one thread in another forum (http://www.allshadow.com/forum/viewtopic.php?f=9&t=4226) quoted as "a minimum of $238.00" to make this repair.
I expect this repair to be offered soon by third parties for about $150, likely using a non-HTC screen product to replace the damaged one.
Has anyone heard any reports about forthcoming availability of such hardware? If so, then are there any non-HTC services to make the replacement?
yeah im looking for this too...i dropped mine and then proceeded to step on it day two with the phone.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
WooHoo 2 items left as of this copy paste. $80, not bad price.
Shaggy
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
This waht i found out
so have the same issue and this is what I found out
so from my understanding there are 2 part to the lcd the outer glass touch sensor and the inner lcd. if the the screen is just cracked and you can see the image the u have to replace both. attached are the part descriptions fromt he g1 service manual. and below is a link of a site that sells them, but for some reason they sell the touch scrren with the outer bezel making it cost more. i called htc to order just the touch sensor glass but they said the dont sell replacements, they just fix em
link
Shagman68 said:
They have on Ebay now:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280303279632
2 items left, $80 cost, get them b4 they gone
Shaggy
Click to expand...
Click to collapse
I contacted the seller of the screen and he/she told me that It's only the screen. If the G1 cracks It's the digitizer glass that cracks first. Then if you are unlucky the screen cracks as well. I managed to only crack the digitizer glass. The screen beneath is totally fine. Unfortunately removing the glass from the digitizer plastic was very painful and I managed to wreck the flat cable of the digitizer so that's beyond repair. Now I tried to disassemble the whole phone but I got stuck at removing the housing. First I had problems with the Torx bits. I have some Torx bits in my sets but the lowest I got was T8. I had to buy a cellphone bits set with a lot of different types of bits. It had Torx all the way down to T4. The T5 and T6 was what I needed. There are 4 T5 to remove and one T6. I have inserted the sharp plastic between the housing and the top case and released all hooks but it seems the front and back part of the housing of the phone is dead stuck.
You have to open the whole damn phone from the back to get to the inside of the screen. Why the screen housing uses standard Philips is also beyond me. I have lots of bad experience with standard Philips screws. The heads always get bad after a while of screwing. I have yet to have a problem with Torx.
So i've read through the stickies and havnt come across anything really substantial, tho I have seen a few other user posts about their G2 suddenly losing video.
That's the issue I'm having.
Here's a little history for you:
Customer brought this phone in to me, said it had water damage. Bought it off them to tinker with myself. I opened it up, and sure enough there were some water stains on the flex cable and the back of the LCD. I replaced both with brand new parts, and now the phone boots, but has only a black screen. It receives calls, touchscreen works, makes clicking noises, all that jazz.... just no video
I've pulled all the rf shields off the logic board to take a peek under them, and there is no water damage at all on any part of the logic board that I can see. LCD and flex cable (and midframe) are all brand new, and I'd really like to get it working!
Somehow I dont think HTC will be willing to warranty this for me (tho I have replaced everything that had water damage, so it should be undetectable as there weren't any water stickers in the phone for some reason)
Thanks in advance!
well, after taking a long google walk, I decided to contact the manufacturer of the LCD I bought and try having them replace it for me. hopefully that is the issue and not one of the chips on the main board or some other cable i missed.
If it IS a chip on the board, I'd love for someone to point it out for me so I can try a reflow. Dont wanna reflow the whole board cus it's still got the internal stickers and I dont wanna damage them in case I can finagle a warranty replacement out of HTC
so does anyone have any other ideas what may be behind this issue other than the LCD? I dont want to have to wait to send this LCD back and get a new one, especially if the LCD isnt the problem
I'm not 100% sure about HTC phones as I have not opened one up yet, so i'll speak with my experience with BB phones instead.
When I was in the process of replacing the LCD screen of a BB Storm, there were 2 different types of LCD screen for one device. Perhaps this could be the case? In the BB case, there was a part number followed by either a 001 or 002, neither of which were compatible with each other. My assumption is a driver issue with the main board.
It's a small and simple thing to overlook, especially if you have prior experience in doing things like this, but I thought it would be worth noting. I would compare the old damaged part with the replacement part and make sure the part numbers match up. If the replacement LCD is from China or Hong Kong, I would be weary about their quality.
Regards.
well I got it on ebay, but it was a California seller. as far as I've been able to determine from looking at listings, the LCD's for HTC Desire Z and G2 are identical. All the clips match up right, and all the ribbon cables looked identical to the one I pulled. I'll look into checking on this a little more in-depth tho so thanks for the info!
Hey Bro,
did you managed to fix your phone? I just changed LCD twice, but still the same it boots and all but no video on it... You can even call it, answer everything else works but the screen... Im thinking to change the FLEX RIBBON CABLE, but after reading your thread not sure if thats going to fix my problem. With my original screen I had no backlight on the LCD with the replacement I got backlight on the LCD again...
Any suggestions, ideas welcome!
hi guys - i foolishly lent my streak to my sister for a while as she had broken her iphone and after a couple of weeks she called me up to say that it wasn't charging and was dead. I figured she'd just done something daft and it would be an easy fix but i got it back today and she's managed to pretty much destroy the pdmi connector (as well as break the rear door catch!) . Phone still works fine as i charged up the battery on the dock and fired it up.
So, is it possible to change the connector or is it soldered to the motherboard? If it's soldered i'm guessing it's a pretty specialist job to get it replaced? Or alternatively, is anybody interested in it for spares? It's in perfect condition as it's always had an invisible shield on it (just removed as it was getting a bit scabby) apart from the connector and rear panel catch....if there is any interest i can pop a thread on the marketplace.
Cheers
Niall
It's soldered. There may be companies which can replace the connector, but I'm not aware of them. You may want to look into replacing the motherboard by purchasing a Streak with a broken screen.
aye, that's what i thought...i've ordered up a connector as it looks like it's the plastic bit that disappeared so maybe be able to refit that from a new one? If not i'll maybe see if a phone repair shop will solder the new one on. Or has anybody got a smashed streak lookin for a new home??