Related
Has anyone looked into this? With the audio now being output there, is there another pin carrying video that's yet undiscovered? Thanks.
nope no video out from what ive researched. even if there were, its qvga resolution so you are fairly limited.
you could your soti pocket controller to control your pda from your PC, you get a real time feed of you ppc on your pc.
hope this helps.
adios...
It is definitely possible to do it (even that I have no idea how).
Ateksoft has a program called WebCamera Plus which let you use your PDA as real-time webcam.
http://www.ateksoft.com/webcamplus.html
I'm using it on my TyTN and it works great.
using a pda or symbian smart phone as a webcam is possible as the software captures the straming video and transmits its as data packetrs via usb or BT to a PC, in which it is then decoded on the PC and the image/video stream from the camera is formed.
Actual video out (such as that accomplished with notebooks) via usb on the TYTN is another thing - from what I have read it might not be possible.
Anyone seen or tried the MicroSD version of this http://www.spectec.com.tw/sdv.htm ?
its really funny u askd this cus just last night b4 I went to bed, I wondered the same thing
I googled video out via usb and found a 60 dollar cable that converted from standard usb to s-video and audio and I'm sure theres mini-usb to usb converter
=) so hope that helps. I'd look it up but I have no 3g here at my parents lake house =/ I'm connectd over gsm, just got here. I get no umts at all and barely any gsm signal. this craps slow
I looked on the net for the Spectec Video-To-Go microSD Card and found it here
http://www.mobileplanet.com/p.aspx?i=139433&partner=froogle
It's $171.95. this would be great if I was still doing customer presentations.
Please note: This product does not convert the screen’s image into a VGA video signal. ... then what exactly does this do .. has me confused since some time ...
Also, these things require SDIO support .. not sure if TyTN got one ..
It'd be easy enough to emulate VGA on your device and use that for presentations, but your limitation is lack of an I/O to the graphic chip. As such, you're stuck with streaming the display data, which will be slow (for games), but perhaps perfectly fine for a slideshow.
Next prob though is the hardware - you can stream from device to device, but not stream from device to a (mini-usb) wire to a projector etc - at least the hardware issues are well beyond my experience.
A streaming projector might be a good solution. But all in, I think you're generally stuck for a cheap solution to outputing video over USB without a surrogate device in the middle. And if you're gonna have a surrogate, you might as well use that as the display device.
Check out nyditot for a VGA emulator.
V
May I suggest a better way? Simply install PC-based Powerpoint viewer on storage card. That way you merely need to drop your card into an USB SD reader, connect the reader to any host PC, and run your presentation. I do this often and avoid traveling with my laptop.
-Jeff
One reason I've always disliked the Ateksoft solution is that it requires installation of Ateksoft magicry on the PC. A true webcam solution should simply make the PPC act like a dumb webcam, piping the audio and video to the USB. We've all experienced those cheap webcams which you just plug in to your USB port, and MSN or Yahoo or whatever can pick up the device as an audio/video webcam, no installation of drivers required.
Software which does for webcam what Softick does for USB mass storage is what I'm after...
You didn't say what you wanted by 'video out'.. but I can tell you there aren't any 'unused' pins in the USB pinout. They're all audio or usb data. If the TYTN supported usb on the go (which it doesn't seem to) then you might see it turn into a mass storage device or webcam easily..
But for the moment, no, theres no pins to tap a composite or vga signal off of. I highly doubt the device has such a chip on board.
eh, I wanted to output video to my car A/V system. since I can sync the video on my device to my media center, that would be the easiest way to take shows to my car. so the streaming or flash solutions really don't address the problem for me...thanks for all of the thinking on it, though
ditto here
JEM said:
eh, I wanted to output video to my car A/V system. since I can sync the video on my device to my media center, that would be the easiest way to take shows to my car. so the streaming or flash solutions really don't address the problem for me...thanks for all of the thinking on it, though
Click to expand...
Click to collapse
That's the kinda stuff i've always wanted e.i. connecting my PDA to the SVideo Input of my car screen.
Seems "easy" to do with activesync, but seems to cause trouble because of the lack of video stream on usb pinout.
I'm just letting out an idea : Might be possible to emulate an activesync connection and capture the sreeen of the PDA and broadcast it out on svideo.
(don't ask, I don't even have a clue of how to do that)
SOTI Pocket controler and My Mobiler can do that, any chance someone find out a way ?
TY Guys, have fun
Hi guys, i am currently trying to set up my Athena with my car, i wonder if it's possible to connect my Athena with a external touch screen monitor like this one: http://cgi.ebay.co.uk/8-INCH-TOUCH-...9QQihZ005QQcategoryZ32826QQrdZ1QQcmdZViewItem
throw the VGA cable.
I know it will display the screen throw VGA out, but I am not sure whether it will enable the touch screen function, any of you know this?
Thanks a lot
p.s. I will post some screen shot if I succeed in this project.
Is that a PS2 port?
Seems to me the key question is how would it get positioning info back to the ameo? That looks like a PS2 port on the non-vga cable. IF it was sending back mouse positioning info AND a simple ps2 to USB converter would work then I'd guess it MIGHT work with the mouse drivers i've seen discussed elsewhere. There is a fair few conditions to meet but mostly at a low level by the look of things. Not much info to go on and also it loks like they are using a pen of some kind there. That makes it less useful I think?
inframan said:
Seems to me the key question is how would it get positioning info back to the ameo? That looks like a PS2 port on the non-vga cable. IF it was sending back mouse positioning info AND a simple ps2 to USB converter would work then I'd guess it MIGHT work with the mouse drivers i've seen discussed elsewhere. There is a fair few conditions to meet but mostly at a low level by the look of things. Not much info to go on and also it loks like they are using a pen of some kind there. That makes it less useful I think?
Click to expand...
Click to collapse
I am sure you don't need a pen, there are lots of touch screen out there, for example this one: http://cgi.ebay.co.uk/ws/eBayISAPI....tToStoreCat&refwidgettype=cross_promot_widget
I just don't know if we simply plug in the vga cable from our Athena to the touch screen, will that work?
Possibility not, I can kind of see a usb cable there, how about plug that in the usb host ? but then maybe we still need to install the driver.....
Basically, what I am trying to do here to use get a bigger screen to show for Athena in a car. So, I will then have much bigger TOMTOM, and also can watch movie or go on internet.
Any good suggestion guys? Thanks a lot for all your help.
I cant see any specks on that, but i did find another that said it was usb, if thats the case theres no reason why it shouldnt work.
johnwalk said:
I cant see any specks on that, but i did find another that said it was usb, if thats the case theres no reason why it shouldnt work.
Click to expand...
Click to collapse
it seems like they all need to install driver, do you think it will work without driver?
thats the only problem, does it need specialist drivers? I havnt been able to come up with an answer yet.
But i wont be buying one for the car, somone nicked me vario yesterday from the car so not even chancing the Ameo.
I was just going to buy a little 7" tv I bought this tiny Keyboard out of Maplin on offer. thought it would look sweet in the car. but this is giving me other ideas, anybody shed light!
They ALL need specialist drivers.
Touchscreen is absolute position, mouse is relative. You NEED the custom driver. It may be possible, but I dont know how.
1. I think on the Pic is a S-Video cable not PS2.
(The specs say nothing about PS2)
2. Till now i just saw Touchscreens with USB and like Profer said they all
need secial drivers.
Basmelek said:
1. I think on the Pic is a S-Video cable not PS2.
(The specs say nothing about PS2)
2. Till now i just saw Touchscreens with USB and like Profer said they all
need secial drivers.
Click to expand...
Click to collapse
Thanks for your answer, i just ask one of the seller there on ebay, and the answer I got is I will be able to plug the VGA cable in, that will enable the screen to display, but in order to get the touch screen working, I also need to plug in a USB, so now the question is whether the USB host will work on this....and of course the driver need to work too
The 4in1 cable should allow the USB to connect, but you would have to convince 3m or somebody (make most of the drivers) to write a PPC driver.
As almost ALL ppc's are touchscreen, they probably wouldnt bother for the 1 customer that wants it
If you know a coding guru who understands USB, then get them to do it for you. Either way, I doubt its gonna happen.
IT WORKS!
Hi, everybody.
Don't know how many of u are interested in this issue, but anyway:
1. just grab the generic touch screen driver for win ce 5.0 from the usual site.
2. Copy 'n paste the UsbTouch.dll file into windows root directory of the X7500.
3. Plug the video cable (the one with usb connector).
4. Plug the xenarc TS usb cable in the abovementioned cable.
5. Wait for the dialogue box asking for the driver to be used with the unknown device.
6. Write the name of the .dll file copied into the device.
7. Press ok.
et voilà, les jeux sont fait! It woks perfectly, without even the need for calibration.
This is (even if it lacks some of the fun of setting up a carputer from scratch) the ultimate carputer, perfect integration among all application and real time (quite) OS.
Cheers.
Cyberlancer.
Pyrofer said:
The 4in1 cable should allow the USB to connect, but you would have to convince 3m or somebody (make most of the drivers) to write a PPC driver.
As almost ALL ppc's are touchscreen, they probably wouldnt bother for the 1 customer that wants it
If you know a coding guru who understands USB, then get them to do it for you. Either way, I doubt its gonna happen.
Click to expand...
Click to collapse
Your on the right track with this answer,
Look for a touch screen that has a protocol that is treated as a standard HID ( Human interface device ) Ie:mouse, keyboard etc.etc.
if you can find such a device then the built in drivers for plug and play HID's will work fine.
otherwise the rest are right
Did this really work??? What car? This would simply be quite fantabulous.
cyberlancer said:
Hi, everybody.
Don't know how many of u are interested in this issue, but anyway:
1. just grab the generic touch screen driver for win ce 5.0 from the usual site.
2. Copy 'n paste the UsbTouch.dll file into windows root directory of the X7500.
3. Plug the video cable (the one with usb connector).
4. Plug the xenarc TS usb cable in the abovementioned cable.
5. Wait for the dialogue box asking for the driver to be used with the unknown device.
6. Write the name of the .dll file copied into the device.
7. Press ok.
et voilà, les jeux sont fait! It woks perfectly, without even the need for calibration.
This is (even if it lacks some of the fun of setting up a carputer from scratch) the ultimate carputer, perfect integration among all application and real time (quite) OS.
Cheers.
Cyberlancer.
Click to expand...
Click to collapse
hi
i dont know if this has been covered (the search didnt find anything relevant)
is there a hack / way for video or tv out on this device??
thanks
zohaer21 said:
hi
i dont know if this has been covered (the search didnt find anything relevant)
is there a hack / way for video or tv out on this device??
thanks
Click to expand...
Click to collapse
I am also interested by that.
Any ideas?
Basically, I would like to know if TV out is possible to connect it to my car entertainment device that I am planning to buy :
Din 1, 7 inch with DVD, GPS, Bluetoth, USB.
This will transform this device to a mobile device with a large screen from where I can surf, chat, play games etc...(launch all apps from the HTC HD2)
Any ideas?
It's not possible. Sorry, but it really is that simple.
Thanks for the answer.
Is this because of the harware that does not support it or is it because there is no driver developped by HTC?
i really think thats a driver problem only Maybe there is a way to stream video signal over wifi or bluetooth? it's kinda strange thing to do but i think it's possible using a software?
I read in a forum that via the 3,5mm jack it might be possible to video out (it was for another phone).
If Hardware does not support it via micro USB, we are stuck I guess,
If it is a driver issue, xda gurus might develep one,
If micro USB does not support it, what about the 3,5 mm jack?
I am not an expert at all, but I am just brainstorming...
Any thoughts?
This is the message I got rom HTC Support
Thank you for your enquiry about HTC HD2
To answer question 1 and 2, the HD2 does not support video out as it does not have a built in video out socket nor would you be able to achieve this via the 3,5mm jack.
It is not a built in function to handle this via bluetooth I could only suggest you try to look up some 3rd party program, but I could not provide support for this.
Best regards,
Dennis
HTC
Well actually, the HD2 does support video out! Using myMobiler you can display in full screen on your PC what's going on on your HD2. And if in turn, you connect your PC to your TV you could also watch your HD2 on your 50'' Full HD TV screen
OK, I'm joking here, the quality would be terrible, but still, it goes to show that it's possible to have video come out from the micro USB port and be displayed on a much larger screen, so maybe someone will go one step further!
pat12 said:
Well actually, the HD2 does support video out! Using myMobiler you can display in full screen on your PC what's going on on your HD2. And if in turn, you connect your PC to your TV you could also watch your HD2 on your 50'' Full HD TV screen
OK, I'm joking here, the quality would be terrible, but still, it goes to show that it's possible to have video come out from the micro USB port and be displayed on a much larger screen, so maybe someone will go one step further!
Click to expand...
Click to collapse
Mon pot
I basically wanted to connect my HD2 to a Car Entertaniement device which has a 7 inch touch-screen, 'genre auto-radio', (7 ' Din1, DVD, GPS, Bluetooth, USB) in order to take advantage of all features/applications from the HTC (Google maps, dictionnaires, enclyclopedia, 3G, opera, chat etc).
Mymobiler will not help at all.
The HTC Touch Pro supports the video-out; The HTC DH2 does not support it as it is now. I have seen on http://wmpoweruser.com/ a guy making a video out cable for this LG eXpo. Check the video. Why can't we do it?
It shouldn't be difficult to make a video out cable...
Via a redfly?
If you were really committed, you could grab a Celiocorp Redfly, wait until they release the HD2 driver, then use the media cable to output to video...
Then, for the transmission of the video, you could use either bluetooth or micro-USB.
So it's technically possible with the right hardware...
The closest thing you'll get to TV out on the HD2 is the ability to set it as a media server, but that will require some kind of media browser client. I've done this with my PS3 and a Nokia N95, but the software is currently under development for the WM platform.
See here...
http://mobileosgi.blogspot.com/2009/08/dlna-media-server-for-smart-phones.html
Incidentally, they use a PS3 on the demo video, but that is not required. Also, you can use this to stream video, not just pictures.
problem is
phones that output through the 3.5 jack have an extra connector inside the socket to carry the image channel so there is no way to adapt a standard 3.5 output to carry video regardless of software. (not taking mine apart to look if its 2 or 3 chanel of course hehe)
as for through the usb im less sure but i'd guess it would only be able to send to host devices and not client peripherals. course, I'd be more than happy to be told otherwise.
samsamuel said:
I'd be more than happy to be told otherwise.
Click to expand...
Click to collapse
i wish some one finds out how to do this.. but i just did a quick search on google and what i found out was that none of the snap dragon processor based winmo devices do video out
guess ill be keeping my iphone 3gs (cos i need video out )
i just played with the hd2 today and boy im gonna miss not having it
zohaer21 said:
i just did a quick search on google and what i found out was that none of the snap dragon processor based winmo devices do video out
Click to expand...
Click to collapse
The processor has absolutely nothing to do with whether or not the device can output video. It needs specific hardware to do this and it is not included in this device, neither through the USB port or the 3.5mm jack socket.
It is 100% impossible to implement a "fix" for this with software because the device simply does not have the hardware required.
Actually, Snapdragon processors DO support TV-Out. The Acer s200 (neo touch) and Toshiba TG01 both run on Snapdragon and support TV-Out. What I think the problem is, is that the hardware is there, but HTC just haven't implemented it. Meaning that they simply have not connected the function. Which is actually a shame as this was the only thing the pushed me away from this spectacular device and choose the Omnia B7610 instead, because it is a better all round device.
ayilm1 said:
Actually, Snapdragon processors DO support TV-Out. The Acer s200 (neo touch) and Toshiba TG01 both run on Snapdragon and support TV-Out. What I think the problem is, is that the hardware is there, but HTC just haven't implemented it. Meaning that they simply have not connected the function. Which is actually a shame as this was the only thing the pushed me away from this spectacular device and choose the Omnia B7610 instead, because it is a better all round device.
Click to expand...
Click to collapse
You need a lot more than just processor support for TV out functionality, so the hardware is not there. Some of it is, but only 1 small part.
Exactly! That's why I was disappointed with the HD2. Seeing as Acer and Tosh both implemented the tv out functionality from the core, why didn't HTC do the same? Surely it wouldn't cost them THAT much more would it?
As far as I understand, this is a hardware related issue and not driver related? If it is driver related, I am sure one day this driver would be coded and made available in this forum.
I was palnning to video out to my car DVD entertainment touch screen device in order to be able to use google maps, opera, dictionnaries etc..
This plan will ne be feasible then...
You can use the hd2 as an usb-stick. With that function i can view movies and listen to music on my Alpine touchscreen radio.
Hi all, fortunately I have my motorola Atrix but I have a problem when playing videos by hdmi to TV, connect the phone and it started the implementation of video on TV but nothing comes out, it is as if not detected, know if I have to do something special on the phone to work this out??
Thanks and regards
Do you select the webtop or media setting once you plug it in? If so, and you aren't getting anything, then your unit might be defective.
Sent from my Nexus One using XDA Premium App
hello I am Spanish and do not quite understand what I say, I connect my phone to the TV by HDMI and then open the rocketplayer by example and not play anything on TV.
I've seen people talking about playing with the entertaiment center hd but can not find how to start that application. I've seen that in managing applications is a size 0.0B, may be why?
Where I can get this application??
Thanks and regards.
josete_chaco said:
hello I am Spanish and do not quite understand what I say, I connect my phone to the TV by HDMI and then open the rocketplayer by example and not play anything on TV.
I've seen people talking about playing with the entertaiment center hd but can not find how to start that application. I've seen that in managing applications is a size 0.0B, may be why?
Where I can get this application??
Thanks and regards.
Click to expand...
Click to collapse
When you plug in the HDMI cable, a pop-up should appear on the phone asking to start the HD Entertainment Center. That's the only way to get video-out onto the TV. If this isn't popping up and you haven't done anything to modify your phone software, then your device my have a problem.
ok thanks for the help, the only modification I've done is to make the root software, nothing else has that something to do?
I have only tested on a old TV, I'll try another to see if that is the problem, my TV is the first that came with hdmi at best can that be right?
Greetings
My Atrix had something wrong with it's HDMI, I had to return it and get a new one. When I plugged it in to a TV the phone would act properly (the pop-up menu would appear, and the controls would be present when the media center was selected) but I wouldn't see anything but snow on my TV. I also tried a HDMI computer monitor to the same effect. I lastly went to the ATT store and tried a dock, same problem.
Interesting to know that it was more than just mine.
Oh, mine was stock, not rooted yet.
-Tom
Hi all, ultimately the problem is not the phone, I tested a friend's TV and it works perfectly, when you connect me jump hd window center and all good, so I have a problem with my TV.
If someone happens just as well try it on another TV in case.
Thanks for the tips and greetings.
This software broadcast only the video to the PC or also the audio?
P.S: Sorry for my English...
It allows you to use your phone through your computer you see exactly what is on your phones screen. You can use your mouse and keyboard to control your phone.
jkozan said:
It allows you to use your phone through your computer you see exactly what is on your phones screen. You can use your mouse and keyboard to control your phone.
Click to expand...
Click to collapse
I already know it... But I want to know if you can hear phone's sounds (music, videos etc...) from the PC.
Hold on let me check. No audio plays through the phone only YouTube works as a video player internal video player won't work I guess if you used a line out you would hear it to through computer.
Sent from my LG-D801 using Tapatalk