Hey Everyone,
The forums here are great. Very informative. I have a quick question though. I bought a used wizard. Everything is fine excpet the center of the screen is unusable. So even when I try tp align everything is off.
Now do I need to buy the digitizer or the whole screen itself?
Any help is appreciated.
Thanks,
Mike
Related
Hi to everyone.
I dropped my wizard and lcd broke so I bought a new one and put it on. The problem is that although it takes phone calls and it syncs to pc, the screen is always white with nothing written..only a white screen. I do not know whether another problem occured besides the broken lcd. I tried to disassemble and reassemble it again but with no success. Any help please?
Hi, If my understanding is correct there are 2 versions of LCD for the Wizard. Are you sure that you have the right one? I'm sorry that I am unable to offer any further advice except to say that if the phone 'phones' and 'syncs' the basics must be working. Also the white screen means that the backlight is working - the problem is the LCD drive. Perhaps worth checking with your replacement supplier that they sent you the correct part?
Good luck!
Hello guys. So today my touch screen stopped working just like that. It does not work at all and i have clicked all over the screen but still not working. What should i do , What can i do or is it anything i can do or try so please tell me.
Any help is appreciated so please guys help me now!
Thanks in advance.
Regards
hi, probably problem with digitizer. i got similar problem some time ago, screen was working but the touch was not working at all or was receiving touch in different place then I was pressing. i send it to service (luckly it was still on warranty) and they change digitizer+lcd.
Unfortunately if screen isn't working at all it sounds like a digitizer issue
Did you change anything on your device recently just before you lost the screen?
Hi guys, i followed all the indictaions on the official videos but i think i broke something! I had an HTC hd2 with a broken digitilizer but the screen worked fine. I bought a screen+digitilzer combo and replaced it but it didnt work.
The screen does not show anything (black screen) but the backlight of it is on!
I tought maybe was a problem of that lcd so i tested the original screen (that was working) and it does the same.
What could be the problem??
Please i need help
come onn, anyone ?
please guys, anyone ??
Sounds like a defective lcd to me. I'd try an RMA asap on getting another unit before your DOA warranty (if the lcd has one) runs out.
it's not the LCD. I had a working LCD but a defective digitizer, i bought the lcd+digitizer replacement and now both screens do the same , just the backlight is on. And before i change the screens the original lcd was working fine.
Could it be because the LCD is not correctly pasted into the chassis ? i really don't know what could it be the problem. The lcd is correctly connected to the mainboard. What could i broke in the process?
Thanks connexion2005 for the help anyways, is nice to see someone finally answered hehe!
zeba5 said:
it's not the LCD. I had a working LCD but a defective digitizer, i bought the lcd+digitizer replacement and now both screens do the same , just the backlight is on. And before i change the screens the original lcd was working fine.
Could it be because the LCD is not correctly pasted into the chassis ? i really don't know what could it be the problem. The lcd is correctly connected to the mainboard. What could i broke in the process?
Thanks connexion2005 for the help anyways, is nice to see someone finally answered hehe!
Click to expand...
Click to collapse
If you were not really gental with the internal parts of the phone, more presisly the ribbons that connect each part to the main board you could have cause micro cracks in the copper strips of the ribbons. Look at the closely with a magnifying. glass if possible.
today i was able to sync it literally with no idea of what i was touching. I also figured that the digitizer works , i was able it dial some numbers. The phone appears to work.
So, Backlight is on, Touch (digitizer) also works, but not showing anything on the LCD.
Could it be a mainboard problem ?? I'm trying to use logic because i don't know anything about cellphones and how do they work in terms of components.
Could it be the ribbon ? I dont think so, i have two screens and both of them do the same (backlight on but not showing anything).
I'm clueless!
Don`t panic. Calm down, watch a demolution tuturial. You probably miss smt. Good luck
But it could be a ribbon...
Ok, I recently fell on my HTC Trophy(Verizon Version), cracking my screen. Before that happened I had a weird LCD problem that came out of nowhere. I replaced both the touch digitizer and LCD screen successfully and turned it on. It worked perfectly. No screen defects ect. Then I later turned it on and the same problem happened! Here are some pics to show you. Do I need A new LCD (oh god) or can I fix it? any answers will be much appreciated. Also, the auto thread search thing is wonderful, great idea!
EDIT:I can't see the spots when the LCD is off.
When I was doing a laptop LCD replacement screen, I had accidentally left a bubble and was so annoyed that it would not display where the bubbles were.
However after 2 weeks the bubbles just disappeared and the laptop's LCD screen was working correctly.
You might want to wait a little longer and see if the heat will evaporate it?
(Good luck)
Hi guys! Some weeks ago I dropped my phone and my whole screen cracked, so, I bought a new one and wanted to repair it myself to save some money, you know ^^.
But anyways I put everything back on, but my screen just won´t start. Well it is turning into a dark blue so I guess it actually works.... a bit. But everything else works just fine, if someone calls me I can easly just pick it up and talk, I just have to figure out where the Buttons are . It reacts to touch so I guess it´s only the digitizer... Please Help
Maybe some ports aren't connected well? Or the display was broken? Try contacting the seller