Please help! My lcd doesn´t work but touchscreen does - P8lite Q&A, Help & Troubleshooting

Hi guys! Some weeks ago I dropped my phone and my whole screen cracked, so, I bought a new one and wanted to repair it myself to save some money, you know ^^.
But anyways I put everything back on, but my screen just won´t start. Well it is turning into a dark blue so I guess it actually works.... a bit. But everything else works just fine, if someone calls me I can easly just pick it up and talk, I just have to figure out where the Buttons are . It reacts to touch so I guess it´s only the digitizer... Please Help

Maybe some ports aren't connected well? Or the display was broken? Try contacting the seller

Related

MDA Vario - White Screen problem

Hi, a few month ago I accidently smashed the screen of my Vario. I decided to buy a new screen so I found one on ebay and installed it in my phone, however when I switched it on all I got was a white screen, no logos, nothing. The touch screen still works as I can hear the sounds when pressing it.
I am now being forced to go to a shop to fix it but I dont really want to shed out money for other people to do. Anyone know what could be causing the problem and how I could fix it?
Thanks.
hi
dont do with ur self u must send ur set to any expert person for evoid any more problems in ur PDA
Recheck the Flexi cable with which screen is attached,may be its detached or not fixed properly or even can be faulty.

Dropped my Wizard - White screen

Hi to everyone.
I dropped my wizard and lcd broke so I bought a new one and put it on. The problem is that although it takes phone calls and it syncs to pc, the screen is always white with nothing written..only a white screen. I do not know whether another problem occured besides the broken lcd. I tried to disassemble and reassemble it again but with no success. Any help please?
Hi, If my understanding is correct there are 2 versions of LCD for the Wizard. Are you sure that you have the right one? I'm sorry that I am unable to offer any further advice except to say that if the phone 'phones' and 'syncs' the basics must be working. Also the white screen means that the backlight is working - the problem is the LCD drive. Perhaps worth checking with your replacement supplier that they sent you the correct part?
Good luck!

broken screen

dunno what iv done but my screen has stopped working, it still seems to recieve incoming calls, but does f all else apart from that!!
i can still get into activesync mode so have been able to copy off all my pics etc but im cncerned my contacts which are not save as outlook contacts may be on the phone is there a program i can use to extract my numbers with my pc??
also i know this is unlikely but is there anyway of extracting and saving all of my text conversations??
remember i must do all this without being able to use the phone itself! lol
please help, ill be contacting orange today for a replacement.
Good luck mate. I had the same issue. Display was fine, but the touchscreen did not respond anymore. I sent the device to the german repair center for HTC and got a letter saying i could either pay 178 Euro for repairing, 21 Euro for having it sent back without repairing or free disposal.
I just had my Touch HD for about two months! The digitizer is not part of the warranty, so I got the parts from ebay and did the job myself. Now all's working fine again ...
For saving data I would recommend "MyMobiler", but unfortunately this wont work out because you had to confirm the installation via the touch screen. Sorry ... But if you do the repairing on your own, you can just leave all data in place.
Good luck anyway ...
You just need to remove the touch screen on the front of the phone with a very fine and strong stick or knife.
http://freshgear.files.wordpress.com...pg?w=450&h=300
the touch screen and the LCD screen are stuck together very good.
You need to be very careful.
it's works, I did it last night and I was stuck at the same spot as you and after an hour I figured out how to do it.
mail me if you need more explanation.
[email protected]
no no, i have no display at all, nothing seems to work, iv just put my chip into another phone but it seems my contacts are saved on the phone, i have a new touch coming tomorrow from orange but i really need to get my contacts of the broken phone, is there anyway of doing this thru activesync, they are not saved as outlook contacts unfortunately
yes you can do it with activessync.
you go to the setting on activessync or windows mobil center and you set what ever you want to synchronize.
but you need to have outlook.
Replace digitizer
franky_phox said:
The digitizer is not part of the warranty, so I got the parts from ebay and did the job myself. Now all's working fine again ...
...
Click to expand...
Click to collapse
I have the same problem, touchscreen not responding. Did you replace only the digitizer (approx. $12) or also the lcd(approx. $60)?
Thanx in advance

HTC Blackstone stays in the DARK(DIMMED) PROBLEM!

Hey everyone. I searched everywhere I could find but with no avail.
Here's my problem. I replace my digitizer with another one. I replaced it just fine as far as my knowledge goes, but after all finished and everything ready and closed/screwed on, I fired it up and the backlight was GONE!
The display works, the touch works, MyMobiler works both with mouse and finger touching on the screen, but the damn screen is DIMMED! I can barely see it if I removed the digitizer or if I shed some light(flashlight) on it from an angle. But just barely.
Tried 3 different ROMs since some suggested that on another thread, did a Hard/Soft reset, with no results.
Is this a screen/dimmer problem or whatever? So if anyone with some answer please help me out. Thank you.
I know that very few look at the Blackstone section nowdays but guys I really need some advice because I need to sell it and I have to pay for repairing(hoping to avoid it) before doing so and also because I already tried everything and I had enough of disassembling it and testing every connector/flex cable if they are connected properly.
Thank you.
loose or dis-connection somewhere..
check all your ribbons are properly lined up, and connected propperly too..

HTC hd2 broken digitizer, problems

Hey all,
Maybe someone can tell me, how to know if it is a soldered or clip-on digitizer on hd2? I just bought one yesterday, and i dont know to change it or not. Tt is working good till i lock the screen, or it times out, when i turn then screen on to unlock it - it is not responding, so i need to push power off-on button again and again, till the digitizer starts to respond. So it works till the screen is on, sometimes it respond after a few pushes of power button, sometimes i need to take out the battery and to start it again, so what can cause it? It is because of bad digitizer or something worse?
Thanks for all answers
PS. It has android 2.3 installed
different digitizers
http://forum.xda-developers.com/showthread.php?t=1341927
Try reading the above post, it may help you out.
My digitizer finally went and now I've moved on but am thinking of resurrecting my HD2, good luck to us both.

Categories

Resources