my PDA suck on boot loader
serial
V1 .00
I read old post found that QTEK 1.06 could work
my PDA when reset, it not respond.
only when open back and turn on
but when reset, alway stuck on boot loader
Maybe this could help:http://www.slipstreamsolutions.co.uk/support/rom_updates.htm#Orange
thank but
there is lated version
anyone have QTEK 1.06 version ( old ).
i have the o2 Xda exec and after upgrading my rom the device goes to the screen where it shows the rom info and just stucks there. i have tried going into bootloader mode and using the mtty prog i installed the rom again. the same thing happens. i tried all roms i could find. nothing! i even updated the bootloader from v1.00 to v1.01...
it just stucks there on that blue screen with the o2 where down at the corner with red letters is the rom info.
this has been going on for a month now. if someone knows anything please reply.
Have you considered putting an O2 ROM back on the device and seeing what it does with that installed - Mike
i have tried ALL roms that exist!!!!!!!! still the same **** happens
plz try to upgrade boot loader to 2.01, and try again.
mine is also O2 and can update any rom with boot loader 2.01
CostasCy85 said:
i have the o2 Xda exec and after upgrading my rom the device goes to the screen where it shows the rom info and just stucks there. i have tried going into bootloader mode and using the mtty prog i installed the rom again. the same thing happens. i tried all roms i could find. nothing! i even updated the bootloader from v1.00 to v1.01...
it just stucks there on that blue screen with the o2 where down at the corner with red letters is the rom info.
this has been going on for a month now. if someone knows anything please reply.
Click to expand...
Click to collapse
Is it unlocked?
My friend had this problem, it was on a Sim-locked phone..
After re-installing the original rom and unlocking the sim it upgraded happily and haven't had problem since!!
okey... i had WM5
by tutorial on this forums i downloaded RUU_Prophet_220734_2207114_024721_NVID.exe . runned it started to install , 95% - booom! ..
then i tryed to do hard reset , NOTHING happening
i dont remember spl and ipl was before but now they are 2.20 and 3.08 .. RUU
model - htc prophet , spv m600
also it turns off sometimes while instaling those.
EDIT:
i followed this: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
after 99% of install it just rebooted and now shows same 3-color dos..
PLEASE HELP ME :\\\
hello everyone. i just bought a g3 wich remains stuck in the ipl/spl screen. i tried VIPPIE 's tutorial (many thanks man for ur work) and flash button rom 1.05 to revive the phone. it flashed without any error , but same result. phone doesnt pass the ipl/spl screen. next i tried to flash Xda_MiniS_LaunchROM_v154102, flashed ok but nothing happend. i m just stuck on the ipl/spl screen. the phone isnt bricked but i can not start it to do a soft spl and flash it. any ideas ?
because it s an o2 xda mini s , i thought an original o2 rom would do the trick (start the phone) but i couldnt find an original rom (tried the xda dev ftp page and the o2 one).
many thanks
ps:sorry for the double posting(wizard+wm6) but now i figured out that since my phone doesnt start and hasnt a wm6 rom on it , the place for this thread is here
fulgerul said:
hello everyone. i just bought a g3 wich remains stuck in the ipl/spl screen. i tried VIPPIE 's tutorial (many thanks man for ur work) and flash button rom 1.05 to revive the phone. it flashed without any error , but same result. phone doesnt pass the ipl/spl screen. next i tried to flash Xda_MiniS_LaunchROM_v154102, flashed ok but nothing happend. i m just stuck on the ipl/spl screen. the phone isnt bricked but i can not start it to do a soft spl and flash it. any ideas ?
because it s an o2 xda mini s , i thought an original o2 rom would do the trick (start the phone) but i couldnt find an original rom (tried the xda dev ftp page and the o2 one).
many thanks
ps:sorry for the double posting(wizard+wm6) but now i figured out that since my phone doesnt start and hasnt a wm6 rom on it , the place for this thread is here
Click to expand...
Click to collapse
Is it the Bootloaders screen(Tricolor) with IPL/SPL or initial loading screen with ipl/spl ?
What ipl/spl...? it displays at the moment ?
You can try to get into Bootloaders mode (tricolor screen) by pressing and holding down the camera button and press the Soft Reset button at the same time with the stylus or turn off the phone and while pressing and keeping holding down the camera button,Power On the phone,it'll wake up and go into Bootloaders (tricolor screen).if it goes into bootloaders,connect your phone to the pc via usb and check if small usb appears at the bottom of the bootloaders screen,if its there run the Ruu to flash,But first post your present ipl/spl..? here.
Cheers
hmm , this is from XDADeveloperWiki
Once the flash is done and your Wizard is rebooted, it will display an IPL of 1.xx and an SPL of 2.xx.
Click to expand...
Click to collapse
well, in my case , after button rom flashes wizard displays IPL 1.01 SPL 1.03 and after i flash the xda_mini_launch_rom it displays IPL 1.03 SPL 1.05 . NOT SPL 2.xx as mentioned in the tutorial . why ?
zabardast_1 - many thanks for the quick reply mate. it starts with the ipl spl screen. i wrote the values above.
i get it into bootloader with the camera + on button , bot the active sync on the systray , doesnt activate, it remains grey (like no device is connected). weird stuff.
yesterday i just upgraded a g4 wizard to wm6 and everything went smooth , an now
fulgerul said:
hmm , this is from XDADeveloperWiki
well, in my case , after button rom flashes wizard displays IPL 1.01 SPL 1.03 and after i flash the xda_mini_launch_rom it displays IPL 1.03 SPL 1.05 . NOT SPL 2.xx as mentioned in the tutorial . why ?
Click to expand...
Click to collapse
ok,after flashing button's rom or xda_mini you'll certainly have an ipl/spl 1.xx,cuz these roms have actually ipl/spl 1.xx,they are aku 1.xx roms,it's required to have ipl/spl 1.xx to use lokiwiz02b tool to SIM/CID unlock the phone,only then it can be upgraded to any wm6 roms.But to upgrade to wm6 its essential to have ipl/spl 2.xx,so to get to ipl/spl 2.xx,you have to flash your phone with T-mobile 2.26,then it'll show an ipl/spl 2.xx as required,ok
Cheers
thanks mate , but in order to do the lokiwiz soft spl i need to have a working phone (i need to write the cab into my phone and execute). by doing so , my phone needs to work after flashing the button rom or the xda mini launch rom (right?). but mine , after flashing, remains in the ipl/spl screen (not the bootloader).
if i flash an o2 xda mini original rom , do i have a chance to revive the phone and to start it in order to apply the lokiwiz soft spl ?
Activesync will not work in bootloaders mode,bootloaders cut off the activesync,you can only verify the connectivity between your phone and pc,if in bootloaders,connect the phone to the pc via usb cable and check if small usb appears at the bottom of the bootloaders,if its there then just flash the rom,there's no need to establish connection through activesync,ok
fulgerul said:
thanks mate , but in order to do the lokiwiz soft spl i need to have a working phone (i need to write the cab into my phone and execute). by doing so , my phone needs to work after flashing the button rom or the xda mini launch rom (right?). but mine , after flashing, remains in the ipl/spl screen (not the bootloader).
if i flash an o2 xda mini original rom , do i have a chance to revive the phone and to start it in order to apply the lokiwiz soft spl ?
Click to expand...
Click to collapse
YES ! first of all you got to have a working OS on the phone to activesync,only the you can perform with lokiwiz02b,ok
ok , so what should i do in order to start it succesfully and use lokiwiz. i cant find an original o2 rom and button rom or launch rom doesnt start my phone. what can i do ?
the o2 roms were deleted from xda dev ftp
ps : mate , if u r kind , log in to yahoo or msn , i m trying to contact u . ty
after a lot of searching and digging, i found the missing xda dev ftp O2 original roms . i flashed Xda_MiniS_LaunchROM_v154102 , everything went ok , same result. doesnt pass the ipl spl screen. tried RUU_Wizard_1050402_101_11210_O2_ENG and same thing. im getting really confused. my pc responses when i connect the wizard, it flashes with no errors , but it wont start. what can i try more ?
ohh, i have made a new nasty descovery: when i keep pressed down the comm button and the voice button and press the reset with stylus, the phone turns off and restarts in spl/ipl screen instead of hard resseting. is it really messed up ?
I'm afraid m8,it has most probably some hardware issues,better get it checked by some techy or mobile repair shop.
Cheers !
thanks mate. you are most probably right. do you have any idea what should be checked and how ? i ask this because the software part is clearly damaged.
can i revive it using mtty program ? as a last resort. some mtty commands ? ty
Hello Everyone,
I have some problem with the at&t 8525.I have tried to upgrade the windows 5.0 to windows 6.0. Suddenly it got stuck on Tri-colour mode. I then tried to downgrade to windows6.0 to windows 5.0 cingular_wwe.Now the phone got stuck on at&t operator logo and its displaying following details in red colour
M 05 R 1.40.30.00
S 04 G 32.73.7020.16H
B 06 D 2.15
One of the other problem is my mobile cannot be synced to my laptop.
When I try for soft reset the tricolour mode will appear again and the at&t logo get disappeared.But when I remove the battery and connect the device again at&t logo will appear and the tricolour mode will be vanished.
I have read several posts ,but could not understand the technical language.
Even then I tried to follow some procedures I could not succeed to bring the mobile alive.
So please give me a solution in a simplified and clear format.I love my mobile very much. So please help