BatteryStatus and Hermes - 8525, TyTN, MDA Vario II, JasJam General

I currently have an MDA with BatteryStatus installed. I should be getting my 8525 today, will the overclock feature work on the Hermes?

i really doubt it, as far as i know it only works on OMAP processors. anyway, why would you need to overclock a hermes? it has a 400MHZ processor!

nope wont work as stated above different processor but all other funtions work as I have it on one of my hermes just can't overclock

go for latest Pocket Hack Master 4.30.047
manage to overclock samsung processor from 400 to 450 mhz

Related

Wizard's Processor performance

I'm Considering a Wizard as a replacement for a Blue Angel but reading the specs I see it only has a 200Mhz CPU, although I did read somewhere that it was a Dual core CPU..Is this correct or was it a typo on the web page?
Anyway I just wondered if anyone on here who has owned both could comment on the relative performance of the Wizard against the Blue Angel with it's 400Mhz CPU.
One of my main uses is TomTom5 and although my Blue Angel handles it fine at 400Mhz I also have an ageing Toshiba E330 Pocket PC (300Mhz CPU) that really struggles with TomTom5.
Anyone using a Wizard with TomTom5 like to comment on how it performs?
You will find that the K-Jam is a bit slower in opening applications than the Blue Angel. However, once they open they generally work fine. I run a number of processor heavy apps from time to time, including Tom Tom with no problems. (BTW, Tom Tom is not installable using the set up CD's directly but you can use the cab files on them. Search the site here for how.)
db
I've had the Wizard for about 2 weeks now and i can say i'm fairly pleased with CPU, everything runs fine but i've heard there is a tool to raise the speed of the CPU in this phone. does anyone have information regarding this tool ?

xcpuscalar v2.93 on wizard

Hi all,
I installed xpcuscalar v2.93 on my k-jam but it just won't start. I would like to know if there's anyone has got it running on a wizard.
thanks
A
Not likely
the Wizards' CPU is a TI OMAP and not an xScale processor...
Arnon
But it's supposed to work on the magician isn't it?
Hmmmm
IIRC Magician IS xscale so it should run fine on there, Wizard (k-jam O2 XDA mini-s or pro, etc) is a different processor technology so its all different
Ah, I see. Thanks.
Is there any way to overclock the cpu of the k-jam?
Thanks
As yet. no
But i have seen on here that it is a work in progress so keep an eye on the forums for a couple of months and maybe there will be soon
Thanks

Overclock MDA Vario (OMAP850)

Hi Everyone!
I'm new to mobile windows, I've recently bought a T-Mobile MDA Vario and discoveredthet I can't run SkyPe because of the processor speed...
So I've come across with OMAPCLOCK V2.0
I'vce installed it, and changed the speed to 216 Mhz
but when I check under hardware in device information the value doesn't go over 195 Mhz..?????
Is OMAPCLOCK not working? or the speed is not shown correctly in the hardware monitor?
Thanks for your help
Fab
Works for me just fine.
Don't worry, if you ran OC properly, then you are running at that speed. I am running at 240mhz and my hardware panel shows 195mhz. Using SKTools system information reports 260mhz!
OK, very good thanks!
I thought so....
cheers
Fab

XCPUScalar and hermes

I everybody
Somebody has already used XCPUScalar with the tytn ?
If it's yes could you give the best speed ?
Thx in advance
xcpuscalar works for pxa processors, hermes uses a samsung processor, so it doesn't work.
thx pof I suppose it's the same answer for trinity devices....
you can use only Pocket Hack Master - http://www.pocketgear.com/software_detail.asp?id=7258 , but only for underclocking device, to lower frequencies, you should have more battery life, but slower application. When I played with this settings I must HR my device, because he become crazy. you can overclock device only to few MHz, but you should have stability problems.
thank's for your advice sinmae

Can "Skype" be installed on Omap 200mhz processored QTEK S200???

Hi friends, i wanted to ask only if "Skype" can be installed on Omap 200mhz processored QTEK S200 or not?
If it can be, i will buy that device but i used Hp rw6815 of my friend's a month ago, Skype was installed when it was bought from the shop, is it installed on Qtek S200 too when i buy it, if not can we download it from the web and install on Omap 200Mhz processored Qtek?
Thanks for u'r attention on topics...
Skype works ... in any threads you can found Regkeys for Skype, then it works with less CPU and you can use it over GPRS connections, with good Quality
Thank you for u'r attention...
And one last question, is there any "Rom or Cpu mhz limit" for SkyPe to be installed? For example, 128mb rom or 400mhz cpu!?..
Why don't you just use the Beta 2.2 which is also available for low power devices?:
http://www.skype.com/download/skype/mobile/

Categories

Resources