I have an xv6700 with WM6 installed. I'm unable to have the phone and wifi on at the same time.
I tried this:
Registry Key: HKLM/Services/WirelessMgr/MutexFlag
Change the "1" to a "0" (zero)
..Yet I still have the issue. Anyone have any suggestions? This is turning out to be a huge problem for me....
im not sure if youve tried this its in the helmi kitchen under tweaks
http://www.freewareppc.com/utilities/ppc6700hacks.shtml
there is an option for that on one of the tabs. Im on sprint but I always see it.
The best thing to do is not install the VZW junk, but if you must, do this registry change and wait a few mins. That's a well known fact with this phone, changes have to sit in for a bit before a soft reset.
Yeah that was it - I just needed to wait a few minutes.
Related
im just wondering after a while of not using my phone the backlight gets reverted all the way dim so i cant see anything on my phone. Luckily i have it on my today screen and i can see just enough to fix it. is there any way to fix that perm so it doesnt do that.
maybe see this thread - doesn't contain a solution, though:
http://forum.xda-developers.com/viewtopic.php?t=51415
I had a similar problem struggling with PocketZenPone and found following issue: There is a checkbox in the energy settings: switch on backlight by tapping on screen (i dont know the exact phrase because i have got a german ROM). Double check if it is checked. If not check it and your problems are gone. Post the result here please for the other guys.
Thanx.
well the thing is ive done that before and well it still reverts back to that setting after a while
gizm0luvsu said:
well the thing is ive done that before and well it still reverts back to that setting after a while
Click to expand...
Click to collapse
Do you mean you have double checked that issue and recognized that the option is not checked although you have checked it.
Do you mean it is unchecked automatically? If so this is a crucial information for all.
I had the same problems some days ago,
Didnt work to check/uncheck softreset.
I went to registry and did it there, and now it works.
johnny which key did you go to
I´m so sorry, i dont remember.
But it was in hkcu\controlpanel\backlight
Try change backlightontap and batterytimeoutunchecked.
That sounds good.
I would revert them and softreset then change them the regular way again (if its not ok.)
So probably i did it at that time.
ok this is getting real annoying this didnt start happening til i upgraded to 2.21. Now everytime i go into standby it turns my back light to very dim and i gotta go and reput it back to bright is there a program that might be doing it.
i have wisbar, resco explorer, resco pocket radio, pocketbreeze, phm reg editor. installed any one else have any problems with those messing with the backlight
i also have memaid, pocketzenphone 6
nm i figured it out thank you all for yourhelp
mda vario back light
gizm0luvsu said:
nm i figured it out thank you all for yourhelp
Click to expand...
Click to collapse
any chance you can tell me how you did it cos mine keeps doing it
Hi,
I have MDA Vario version of HTC Wizard.
After a ROM upgrade (to version 2.21.2.11) I have the following problem :
If I set AlwaysOn=1 in the registry, then GPRS is always connected as it should be - but when the device goes out of standby (by pressing (I) button or by an incoming call/message), the keyboard and touch screen do not respond for 10-20s. I can hear beeps when pressing keys but nothing happens (e.g. I cannot pick up a call...). After an annoying while, everything goes back to normal until a next standby-wake up cycle.
I've re-flashed the device with my operator ROM three times already, no other programs are installed (except customization stuff) and still have the same problem.
Before I decide to use some custom ROM, I'd rather try to find some other solution...
Any idea ?
regards
Maciek
AHHH me too
same setting applied and now i can i get a white screen after the tmob boot screen. when i call my phone it dosnt ring but the send & end buttons light up. the green signal indicator light is on too, and thats it. it also sleeps after a few min like normal, but the when i wake it up, the signal light is flashing but the backlight is not on. i really want to figure out how to put a txt file in the root of a card with instructions ot reinstall the backup reg i have. or get an activesync of my favs, list of apps, and outlook. any thoughts would be appreciated.....its my first ppc/wm device (xircom rex 6k --> handera 330 --> sharp zaurus 5500sl --> sharp zaurus 6000l --> HTC Wizard/T-mobile MDA Vario).
Resurrection
Hi - I am having a problem almost identical to the one in the first post. when my phone is in standby something happens which means it does not respond when turned on for about 20seconds, although it will anser a call. it's very annoying if you want to add a date quickly or send a text.
I have turned off gprs always on, removed any storage card plugins, and changed exchange server to only sync the last 3 days instead of everything. I am really a bit confused as tbis problem has only come about since I installed the tmob 2.26 rom and latest uk radio (after unlocking my phone) my phone previously worked fine with the current uk rom but was very slow toboot up. I don't really want to downgrade but i'm not seeing much option rihgt now. did anyone ever solve this?
any help greatly appreciated.
I am not really sure if this is a result of the GPRS ALWAYS ON settings - it just does not look that way!
I had a similar problem without having GPRS always turned on. After I reflashed the phone with exactly the same ROM again everything works fine. Did you booth install the CUSTOM ROM integrated in the flashed ROM as well or did you perform a SOFT RESET before it could install? The reason I ask is because of I think the problem is in the way how the WIZ writes / adds contents to the REGISTRY. It might have been that you resetted the device a bit too fast after HARD RESET or REFLASH and some of your REGISTRY KEYS are messed up!
If you have the possibility to perform a HARD RESET or REFLASH of your device: please try it and see if the problem persists! But please do not reload a backup afterwards because it would import also the faulty registry again ...
Please post your results afterwards, so, others would have a solution in future!
will give that a shot, although I did a completely clean install on this phone - no imported backups etc... is there any tool that can reset my registry to default settings?
the_angry_monkey said:
... is there any tool that can reset my registry to default settings?
Click to expand...
Click to collapse
Not really!
Depending on your phones ROM and CUSTOM ROM your registry will differ from others anyway, so, the only one way to get a 'default registry' is to perform a hard reset.
Hi guys,
I setup when my JASJAM running on battery, to turn off backlight when the device is not used for 1 minutes.
When the device turn off backlight after 1 minutes, and i turn on it, and check the settings i see that there is a new value set - 10 sec.
Can someone help me, which registry value i need to change.
BR
This problem is purly with the rom you are using. I tried changing this when i installed the beta version of AKU 3.5 Rom and it wouldnt work, even after setting it in the registry! Everytime the device turns off it just resets to 10 secs....very annoying!
2 options.... Flash it, or live with it.
It has been reported that add on programs cause a conflict with the operating system. This results in the backlight defaulting to ten seconds. (With WM5, default is set at thirty seconds.) To remedy situation you can remove, one by one, any programs that you have loaded onto your PPC to find the offender.
I resolved this problem with a hard reset and it hasn't recurred so far.
Here is my trouble:
When I change the backlight timeout to 30sec in the GUI under the Backlight, Battery Power tab, it resets back to the 10sec default after power cycling the 8525.
I do have an HKEY_CURRENT_USER/ControlPanel/Backlight/BatteryTimeout that changes from 7 (Value Data) to 30, when I change the GUI as mentioned above. However it doesn't stick, and changes back after a power cycle.
Any ideas?
Thanks,
motsf
Registry changes aren't realtime. If you're resetting the device too soon, the change won't take.
Wait a few minutes after making the change before you power down or reset or try to change it again.
Doom Tints said:
Registry changes aren't realtime. If you're resetting the device too soon, the change won't take.
Wait a few minutes after making the change before you power down or reset or try to change it again.
Click to expand...
Click to collapse
I've changed the setting in the GUI & in the registry in the morning, and at around 14hrs later, reset it, and it still changes back to the 10sec default.
Any other idea's?
Thanks,
Steve
motsf said:
I've changed the setting in the GUI & in the registry in the morning, and at around 14hrs later, reset it, and it still changes back to the 10sec default.
Any other idea's?
Thanks,
Steve
Click to expand...
Click to collapse
This problem has been discussed many times on several fora. One such thread is:
http://forum.xda-developers.com/showthread.php?t=306303
Mike
Are there any other updates/solutions to this backlight resetting problem? Mine started doing it after a hard reset and it's driving me nuts. I've changed the same registry settings as suggested above, but no effect.
I don't want to hard reset again as it was a major pain to get things going on my 8525 again and I really don't want to uninstall a bunch of programs (I have a ton on mine).
If worse comes to worse, I'll wait for the official AT&T WM6 update to come out next month, but I'd like to see if there's any other solution for now.
Thanks!
JEFF
I think I found something. The backlight timeout stays set until I lock the phone using the today plugin. As soon as I do that, the 10sec timeout is reactivated.
I'm running VP3Gs V3
I've gone for the easy option, given that I don't fancy either uninstalling applications 1 by 1 until I find the culprit or having to hard reset and rebuild the device all over again.
That option is to disable the backlight turn-off setting and manually do it myself after using the device.
WB
wacky.banana said:
That option is to disable the backlight turn-off setting and manually do it myself after using the device.
Click to expand...
Click to collapse
It appears that you are right. The "device lock" today plug in does not appear to re-enable the black light turn-off setting if it is off. If it is on, it does change it to 10sec through. Good to know.
I've been trying different options to alter the Data Disconnect on my Verizon Titan. Ideally I wanted it to disconnect after the phone shut off +/- 30 seconds. I've tried several different options, ending up with PocketToolman which is simple enough...or just using the ConnMgr directly. I just recently tried using the KaiserTweak, and things seemed fine with that.
The problem w/ KaiserTweak (at least in my case, may not be generally) was that whatever interval I set the time for: 1 minute, 30 seconds, 10 minutes..it seemed to randomly disconnect whenever it wanted to.
At this point I'm just looking to
1: Remove KaiserTweak - Done that already
2: Bring back the original Registry Settings - Need a bit of help
I've hard reset my phone enough times recently to not want to take up the 20 minutes or so to install everything and get settings going.
The following changes have been made in my registry:
SuspendResume: GPRS_bye_if_device_off
CacheTime: 120
Could anyone post what SHOULD be found under:
HKEY_LOCAL_MACHINE\Comm\ConnMgr\Planner\Settings without changes?
Thanks, if not...one more hard reset never heard a guy.