Hi,as a matter of I needed a new phone, I bought a MDA Vario 2.
I found some problems like when you press the wakeup botton it takes up to 3 sec to show the display on.
Another one is the camera,is too dark anywhere with a bit of darkness,even using the night mode on day still quite dark.When moving the camera is like flashing the screen quick and chaning the adjusments of the colors, :| Faulty or damaged???
I tried with differents roms but the camera still doing that and the power button as well.
Related
I have a problem with my IMate JASJAM. The camera app sometime behave weird and shows scrambled. After several reboots, it goes to normal. This has happened several times. I have tried hard reseting but so far no luck. The issues remains.
I am using the latest ROM version for IMATE JASJAM.
Any suggestions?
I have the T-Mobile varioII for only a few days.
The camera screen is displaying a line in the same position of the line just above the battery icon in the today screen. This seems to affect the use of the ok icon and button, in that it won't consistently save the settings. The line does disappear, but as soon as I use any buttons, it comes back.
Soft reset sometimes removes it until it reappears.
Do you have anything similar to this, or anyone comment please?
sorry, can't help there but here's my own camera problem:
After having to send back 3 tytns with screen alignment issues my 4th handset's screen works perfectly however on all 4 units the camera is crashing frequently, or sometimes just taking a blank, grey picture. I obviously want my camera set to best quality: 2m, superfine. When i take a pic where the light is good (mainly outside on a nice day) the tytn just switches to the today screen. If i try to access the camera app I get a "camera in use" error message, if i go to the running apps screen the camera app is not there to close, only solution is a soft reset, take a pic and it happens again.
The only workaround I have found is to set the camera to L, fine quality but i'm not happy with this - why have a 2mp camera that only works when it is dumbed down?
Surely i'm not the only one with this problem as all 4 sets had the same issue.
I'm loathe to send this one back in case the 5th set has the screen issue.
I faced the issue that my camera screen show scramble. And when I take the picture, the phone returns to the today screen, and when I tried to start the camera again, it gives me an error that the camera is already in use.
My problem of the camera having a line on the screen may not be the screen.
The line is appearing in the captured image. I didn't realise this until I rotated the image. So, it may be the camera/lens at fault.
I had the identical camera fault as described in the original post. Soft resets cleared the screen but the fault re-appeared after activating the camera. I had to pester the network into replacing my 1 mth old voda version. I have to admint the fault only started after I dropped the handset though.
lol well might as well add mine, my zoom doesnt work! Just will not shift from 1x
Schooleydoo, you know there is no zoom at 2 mp. It only works at lower resolutions and in increasing amounts the lower you set it..
Any solutions??
Hi,
Has any of you found the solution to the original problem? My phone's camera shows scrambled screen continuously and doesn't get back to normal.
Any ideas??
Regards,
Saurabh
I have a scrambled screen too. It started when i was too low with memory, after 3rd warning phone turned off itself 3 times - it never happened before, some of the programms crashed for good, and camera shows camera menu but picture that camera sees is scrambled, so are the pictures taken. When I tried to take a video it showed that I am missing some codecs. After Flashing I can record videos and make pictures, but I get only this results...
:/ .... anybody have an idea?
I don't know what exactly happened... I flashed phone with the same WM6 and installed Webcamera plus v1.051, and TCPMP v 0.72 RC and camera still wasn't working, then suddenly it started to work a day after .. i don't know if it will help anybody, but.... i think that some codecs from those programs in some way overwrited phone codecs...but I am a new, so I may be wrong
I almost never use the camera mode on my Trion, but last night I wanted to take some shots at a party. When I tried to turn on the flash the icon was gone from the screen. I tried the function list it has flash on/off but when I hit "on" nothing happens. Like I said I almost never use the camera, but I know it use to work. The only thing I did recently was add Hermes Tweek from fit4cat. I have tried soft reset, but I realy don't want to hard reset just for a stupid flash. I'm not the most tech savey guy, so I live in fear of bricking my phone every time I rom update. I like the way its set up now, so if it has no flash so be it.... But the pictures I could have had of last night.....Well, photo ops like that don't happen every day!!!
Flash
pdausr1 said:
I almost never use the camera mode on my Trion, but last night I wanted to take some shots at a party. When I tried to turn on the flash the icon was gone from the screen. I tried the function list it has flash on/off but when I hit "on" nothing happens. Like I said I almost never use the camera, but I know it use to work. The only thing I did recently was add Hermes Tweek from fit4cat. I have tried soft reset, but I realy don't want to hard reset just for a stupid flash. I'm not the most tech savey guy, so I live in fear of bricking my phone every time I rom update. I like the way its set up now, so if it has no flash so be it.... But the pictures I could have had of last night.....Well, photo ops like that don't happen every day!!!
Click to expand...
Click to collapse
pdausr1
You probably know this but in case not - as you don't use camera often, the flah icon will vanish if the camera has slipped off straight picture mode into the mode where it takes a series of pictures. i.e if you look top left corner you should see a logo of a camera not three symbols of pictures lying on top of one another. I find mine constantly slips off straightforward picture mode because the jog wheel gets moved without noticing. The jog wheel cycles through all the different camera and video modes.
Mike
Nope its in single shot normal camera mode, but thanks for the tip on the scroll weel I did not know that. I think one reason I don't use the camera more is I hate using the styles when I'm taking a picture, so if you have anymore hardware button tricks you want to share.
Camera Hardware keys
pdausr1 said:
Nope its in single shot normal camera mode, but thanks for the tip on the scroll weel I did not know that. I think one reason I don't use the camera more is I hate using the styles when I'm taking a picture, so if you have anymore hardware button tricks you want to share.
Click to expand...
Click to collapse
Don't need stylus for camera. Start camera with button on side of case.
Take pictures with the Dpad button ie one in centre between the two phone buttons.
Accept the piture by pressing it again and your ready for the next picture.
Exit camera by pressing OK hard key button.
Mike
You are ok how ur now mate.....the flash is useless if not u want to use it for torch....even pictures taken from 5-6 feet away dont get any diffrence with flash on and off at night....though 1-2 feet picture will give you a lot of change...all white washed brighten up dude!!!!! i did took atlist 200+ picture with my tytn but i cant remember a picture which were benifited from the using of flash....
anyone any comment??
Night photos
Yup, Sajib, you're right - day photos pretty good, night photos rubbish. Flash 80% useless except for certain angles when taking night photos in macro. I have nothing I would need to photograph in macro in the dark but there maybe many who have!?
Mike
Well I guess I will just have to find my keys with the light of the screen, as that seems to be the only thing it good for. Thanks for the tips. Who knows mabey the flash will come back when I get up the guts to flash the Cingular rom.
my mda compact is palying up agian. some time ago the downkey decided not to work very annoying , the most annoying part was when i put the device on standby via the side button then turned it on the highlight shoots all the way down the option (owner the 4 icons, task,messges, appointment) all the way down as if i i was holding the down button down. this is really annyoing becuse if i leave my phone on silent someone rings after they have stopped calling the highligh parts shoots down the menu and will sit at the bottom of the screen highlighting battery it will then sit there and the and the battery will run flat very quick. when i turn the device off standby and the highlight shoots down if i press up down left or right it stops but i cant use the downkey.now when it first did this it did it for 2 days then sorted it self out was fine for weeks then happend again but didnt change for a month so i hard reset it and it was fine for 3 weeks then it happend again and THEN WHATS EVEN STRANGER is that the screen colours have packed up.everything is now blurred and pixelated its as if the colur setting went from 1000s to 100s (its hard to describe) if i take a photo all the clour scheme is messed up its like running comic book (ink effect) i then hard reset again and everything sorted out 2 monthts later its down it agian BOTH things i have hard reset it 2ce with no effect and im very angry as i had to sacrifce all my data hoping it would fix to that also also there is no sound out the devices rear speker although i have head this is because of the headphone jack although to be honest thats the smallest problem to me
any help would be so appreacited i thank all that took the time to read this as its pretty long
THANK YOU
im very sorry the names are new to me but this is mda comapact II apolgies
Dismantle and clean the keypad.
Yesterday at a concert i was nervous because i cannot film dark places with my phone but i tried anyway. I started the camera, used on/off to put phone in standby and soon after called it back to life to check time. i pressed the camera button to delete the video but the camera started overlaying today screen and i saw it was working perfect in total darknes where lights flashed here and there.
this is new to me but i was able to film almost a full hour without glithing.
can you ppl with different ROMs duplicate this?
so i was thinking.. there must be something that starts/stops when you put phone to standby while camera is working.. cant we just make the phone start/stop that everythime we press camera button (when we find out what it is)?
call me idiot or whatever if what im saying is wrong
i noticed the same behavior some months ago, probably with a different ROM. didn't have an answer for this
topic has 51 views and only your reply. looks like its "normal" i guess
but with latest pcarvalho rom my TC is perfect, only camera sucks
rofi03 said:
i noticed the same behavior some months ago, probably with a different ROM. didn't have an answer for this
Click to expand...
Click to collapse
1.Open your camera..
2.Put your fingers in front of the len
3.push the power button to bring device to stand by,and after 4 seconds,
push again to wake the phone.
4.Now release your fingers from the len and you have a very quick camera.
If you can't do it with the first time ,follow the steps and do it again
kostas244 said:
1.Open your camera..
2.Put your fingers in front of the len
3.push the power button to bring device to stand by,and after 4 seconds,
push again to wake the phone.
4.Now release your fingers from the len and you have a very quick camera.
If you can't do it with the first time ,follow the steps and do it again
Click to expand...
Click to collapse
its working great
is there any way to work always... after close camera and open again you must do it again....
there is no need of holding your finger infront of camera or whatever its only done by standby->wakeup. but you have to be in darker-than-full-daylight place and it only works while you point at dark. if you point to light the thing somehow resets and its all over again.
i posted this because i want to know if we can somehow force this behaviour to allways. i am sure this is just a minor flaw in code. any programmer here with any ideas about this?
i cant believe no one cares about this...
Hey Guys,
After recently purchasing my Samsung Note III N9005 only 3 days ago, I've already encountered a problem - The phone works absolutely smoothly until the screen times out and doesn't turn back on! I am able to see that I am getting notification via the notification light and that the phone is still active as the two keys light up and the hepatic feedback can be felt both with touching the keys and removing the S pen, however the screen does not respond by turning on - until I restart the phone through holding the power button down.
It seems that I am not the only one who is having this problem, with numerous other people around the world also encountering this problem - However, I have been unable to find a suitable fix, and finding the process of restarting or taking the battery out inconvenient!
I have also found a YouTube Video of someone who's has the same problem as me:
As I am unable to post links being a new member : The name is of the Video is - Samsung Note 3 III screen not turning on...
I look forward to your positive replies!
Prak06