Operator name missing and camera issues - 8525, TyTN, MDA Vario II, JasJam General

I've got a v1605 flashed with Schap's 4.30 WM6, which seems to be working pretty well... However, I've got two slight issues:
Firstly, at some point, I've managed to lose my Operator Name. It said 'vodafone UK' when I first installed the ROM, but now it's blank (so I get nothing in the dialer, Phone Settings 'Home Service' and HTC Home just says 'Home' - is there any way I can fix this? I don't know what I did to break it... I did search, so I'm sorry if this issue's been covered elsewhere already.
Secondly, my camera seems to be much worse than examples I've seen taken with TyTNs owned by others. I've got serious colour 'banding', almost like applying the watercolour filter in Photoshop! At first, I thought it was just because it was on a 65k colour screen and that they'd look OK once transferred to the computer. However, they don't - the banding remains. It's really odd, because it's sharp and relatively noise free, and the macro is really good, it's just this banding issue that seems to have persisted through the original Vodafone ROM, a Black ROM and now the current Schap's ROM, all of which have had different versions of the camera app. I'm wondering now if it's a hardware fault, since there doesn't seem to be any setting I've missed...

I think I'd better bump this before it gets buried. I can't believe nobody has any idea how to get my operator name back since there are quite a few threads about changing what's displayed. However, I don't want to 'hard code' it in the registry - I just want it to display the actual name from the network/sim again...

I think the loss of operator name was caused by Radio 1.54.30.10... I guess some permanent damage has probably already been done from what I've read here. It looks like 1.5x is really dangerous, and to say that it's designed for a specific operator and wouldn't cause any problems there is stupid. If I was a customer of a network which officially distributed a 1.5x, I'd be really pissed off as I expect to be able to take my phone anywhere in the world and not fry the radio! At least, I've never heard of the radio in a Nokia or SE with operator-branded firmware dying when taken abroad!
Even though they've never been released as part of unbranded firmwares from HTC, they must be aware of its distribution, and should really put an official warning up stating the dangers of 1.5x radio builds. Odd thing is that if I stick another operator SIM in, the name shows up fine. I hope it survives in the long term. I've flashed it fine with 1.47.00.10 now, although after everything I read, I left it sitting on the ledge of an open window for a while before flashing it off the SD to make sure it was cold (it seems the likelihood of radio corruption is much higher when the device is warm...)
Any ideas on the camera issue?
Edit: By the way, is 1.48 a known safe radio build, because I notice people are reporting better performance with it than other 1.4x builds?

Azurael said:
Edit: By the way, is 1.48 a known safe radio build, because I notice people are reporting better performance with it than other 1.4x builds?
Click to expand...
Click to collapse
No known/reported issues up to radio 1.49.xx - It's only the 1.5x.xx where a potential link to hardware issues is being investigated - but it has not been confirmed (ie. no hard evidence) so it's more about using a bit of caution. 1.5x deaths are suspected in UK, Germany and Netherlands as they have large numbers of recent deaths where 1.5x was being used and the death occured "spontaniously" ie - just happened when things were working fine for a while but no proven link. I agree however, that the risk at the moment with that radio is fairly real and advise people to use it with extreme caution or at least do their own research on users sharing their own operator/area.
While a radio update may cause your network operator logo to change a bit (as can changes in the ext_rom etc) it certainly shouldn't cause issues with your camera and I suspect that's something else at play.
In terms of fixing your operator logo - I don't know any other way than tweaking the registry...
Have you tried other OS Roms with updated camera software to see if they cure your camera issues?
Good luck! (new motto - Radios fine up to 1.49)

As mentioned, try flashing another rom for resolution of both issues. Otherwise, u can tweek the registry for the op name or do a hard reset.

I had it apart since I wanted to tighten up the slide mechanism and the camera wasn't properly connected - it just fell off the PCB, only held above it's socket by the nearby flash LED PCB...
I cleaned the connectors out and plugged it in properly, and it seems to be much better now.
As for the operator name, it did seem strange that it could be caused by the radio, but somebody else reported it in the radio death issue thread, so I did wonder. I'll try flashing it with a different ROM soon, anyway, since this one's a bit heavy on the memory usage and has some irritating issues with the dialer anyway.
Edit: Fixed the op name as follows:
http://www.modaco.com/content/HTC-H...44537/Nature-Weird-operator-name-on-SPV-C550/
There was an entry in the registry with vodafone UK's carrier ID as a series of whitespaces. How odd. Deleted it and the name came back. I wonder how it happened though.

Upgrade & camera issues
FYI ... I loaded Schaps 4.30 Hermes ROM and loved it. Ran great for several days and then I ran the latest Radio update to 1.54.30.10. After I did, several things went wacky, including my camera. I could not access my camera, not even through the camera or video launchers on the HTC launcher. I had problems with my keyboard too, but found changing the keyboard to Cingular (instead of English) fixed that problem.
I reloaded Schap's 4.30, but it did not downgrade the radio and my problems persisted.
So, I reloaded AT&T's office WM6 upgrade and it downgraded the radio and from that point on, everything worked great. I've since gone back to Schap's 4.30 ROM and having no problems with camera or video. But I'm not planning on upgrading the radio (at least for now). Schap's 4.30 took the radio to 1.54.07.00
I have an AT&T 8525 a.k.a. HTC Hermes 100. I hope this helps you to better troubleshoot your camera woes!
P.S.
I'm considering loading Schap's 4.31 ROM (released today), but ... considering all my ROM woes lately ... I think I'm going to wait until I can read some of the reviews on his latest ROM.

Azurael said:
.......
Edit: Fixed the op name as follows:
http://www.modaco.com/content/HTC-H...44537/Nature-Weird-operator-name-on-SPV-C550/
HKEY_LOCAL_MACHINE>SOFTWARE>Microsoft>RIL>OperatorNames>23410 = O2 UK
23410 is o2 uk
23433 is orange uk
23415 is Vodaphone
23430 is tmob and virgin
23420 is 3
............
Click to expand...
Click to collapse
Azurael, thanks for the op id fix. Ever since I upgraded to Schaps4.01 BatteryStatus has not been displaying operator id correctly. Now its fixed!
FYI- Centennial Wireless is 31030.
Cheers.

Operator ID List
Here is a list of Operator ID's...
http://www.gsmcenter.pl/pg.php?tid=88&s=&dodruku=1

Related

ROM 4.0.0.21 Thoughts

I'm thinking about installing this new one. Has anyone done it? Have any thoughts yet? I'm kind of disappointed they removed AIM from there. Nice to have that in ROM. Saves some storage memory.
Anyway, if anyone has any reports on stability, etc, let's hear it.
Also, does this one come with another radio stack?
seems ok
seems ok for now. no radio in the distribution we got (only nbf ).
from my poin of view it's wiser without aim because i can stick up more content suited to my needs.
no stability problems (though only 8 hours )
Decebal
FYI
The hard reset after bootloader mode has been fixed if you want to count that, its a big plus in my book. 8)
It doesn't appear to be fixed, at least for me. Hard reset after bootlader is still exist.
I thought about upgrading to the new one, but everything's working just fine under 4.0.0.16, so maybe I'll stick with whats working for now.
Then I won't have to reinstall all my apps.
GregP74 said:
I thought about upgrading to the new one, but everything's working just fine under 4.0.0.16, so maybe I'll stick with whats working for now.
Then I won't have to reinstall all my apps.
Click to expand...
Click to collapse
Why not just do a full backup, upgrade, and then just do a restore
Restoring from a backup after a ROM upgrade is not a good idea, because the older files will override the newer ones in-turn causing you all kinds of trouble.
HTH
ID64 said:
It doesn't appear to be fixed, at least for me. Hard reset after bootlader is still exist.
Click to expand...
Click to collapse
Sorry to hear that mine is still holding strong with no hard setting, call me lucky I guess!
BTW anybody else not getting the hard reset after going onto the bootloader?
Hi All, i cooked up a .16 ROM in Jeff's Kitchen (thanks Jeff you are a legend).
Only 1 new problem with my device, it's the backlight....seems to turn off after the timeout even when i'm using my device.....strange. Never had this problem before.
I've also noticed that my problem with contacts not opening and having to sort reset the phone to resolve the problem is still evident. This has been with 4.00.01, .05 & now .16
Anyone got the above problems with .21????? I'm going to wait to upgrade, from what i can see the changes in the .?? releases are vendor apps etc.
Cheers
Steve
PS - i was brave and cooked up an exe install, it worked just fine.
ozsmac said:
Only 1 new problem with my device, it's the backlight....seems to turn off after the timeout even when i'm using my device.....strange. Never had this problem before.
Click to expand...
Click to collapse
I've had the .16 rom do that too me before also. Wonder if that's fixed in the new 4.0.0.21? Hmmm
Where can I gett xx.21. As far as I can see not through the ROM Kitchen
GregP74 said:
ozsmac said:
Only 1 new problem with my device, it's the backlight....seems to turn off after the timeout even when i'm using my device.....strange. Never had this problem before.
Click to expand...
Click to collapse
I've had the .16 rom do that too me before also. Wonder if that's fixed in the new 4.0.0.21? Hmmm
Click to expand...
Click to collapse
I tested 4.0.0.21 ROM; it has more problems than improvement!
cgigate said:
I tested 4.0.0.21 ROM; it has more problems than improvement!
Click to expand...
Click to collapse
can you tell me what do you mean by "more" ... i've cooked up a 4.0.0.21 with some apps for myself and had no problems yet ?
Decebal
The problems I've been noticing since this upgrade are slowness, the occasional freezing, and loss of signal (more so than before). I might try re-installing to see if this helps at all.
ozsmac said:
Only 1 new problem with my device, it's the backlight....seems to turn off after the timeout even when i'm using my device.....strange. Never had this problem before.
I've also noticed that my problem with contacts not opening and having to sort reset the phone to resolve the problem is still evident. This has been with 4.00.01, .05 & now .16
Anyone got the above problems with .21?????
Click to expand...
Click to collapse
After having no problems since Friday, I noticed the same issues happening to me last night...
The backlight turning off on me while I'm using it...a soft-reset solves it.
Other apps freezing resulting in me to do a soft reset.
I never had these problems w/.16, so I'm considering switching back; however, seeing Ronin's post:
I spent about 3 hours with a Microsoft Windows Mobile developer( from Microsoft) and he explained that our suspicions on Themes and hardware and SD resets are correct.
The versions of our T-Mobile and X2 WM 2003 were provided to T-Mobile in the early part of February. The OEMs worked on their versions to incorporate their unique "features" and there is a conflict in the way WM2003 Phone edition addresses memory calls (to ROM or SD cards)and WM2003 function.
The memory calls are typically made once a Theme switch is made. Remeber themes not only change Today's screen, but all other colors in the apps. Somehow, our WM PE overrides the memory allocation on the SD cards, renaming them and causing our erasures. This will sometimes happen when we get an SMS or have a custom ring or sound profile installed or after a soft reset.
So no solution for the issue other than " the lock" button. The default theme is a good alternative, but I suspect we will still have some more erasures related to this memory addressing issue.
Furthermore, it is unlikely that T-Mobile or other OEMs will fix the issue on their own volition...They are having many challenges with stable stacks and custom builds!!!
Click to expand...
Click to collapse
- I might just consider going back to v3.17 w/the ATT Radio stack
strange, i started developing problems with .21 yesturday too!
first the internet kept getting disconnected, i thought it was the GPS cozin it. but then at night the backlight started acting up. even when im using the device. a note on that tho, if i play movie clips, the light stayed on! it was a 12 minute clip, it stayed on the whole time, once it was over, light turned off.
also, i notice the gprs internet is extremly slower than b4
i must say, the ONLY thing i like about 2003 is the media player, it has better video rendering, i wish they made it installble on 2002
nothin wrong with that version. heh
ntabikha said:
strange, i started developing problems with .21 yesturday too!
first the internet kept getting disconnected, i thought it was the GPS cozin it. but then at night the backlight started acting up. even when im using the device. a note on that tho, if i play movie clips, the light stayed on! it was a 12 minute clip, it stayed on the whole time, once it was over, light turned off.
also, i notice the gprs internet is extremly slower than b4
i must say, the ONLY thing i like about 2003 is the media player, it has better video rendering, i wish they made it installble on 2002
nothin wrong with that version. heh
Click to expand...
Click to collapse
I'm with you on the media player AND the slow GPRS...it's r-e-a-l slow. I wasn't sure if it was worth mentioning but your account of it confirms it for me.
great!
I updated to 4.0021. T-Mobile device bought in USA. I live in Europe.
Now I have band switcher, good GPRS connection (no breaks), auto-response.
One problem: some web page said me "you cannot open this page because your browser does not use cookies. please...." blablabla
?
I see this meeasge first time, previously PIE did it (shown) ok. I checked settings of PIE, cookies are running. Any ideas?
You know what, I've just done some connection tests at www.texan.net/speed.htm and I'm currently getting the following connection rates:
81.5kbps, 104kbps, 81.6kbps
I get these readings by going to that URL, and in a 10 minute period I would run a test twice at the beginning, then twice again on the 5th minute, and two more times on the 10th minute, using the 2nd reading each time (in order to get the reading with a cleared cache).
- with these speeds (I'm used to similar readings on my other WM2k3 PPCs and connecting via Sprint's CF2031) pages come up so quick, but on my T-Mobile MDA, running WM2k3 v4.00.21, w/RS6.24, plus my new 64MB onboard RAM from PPCTechs.com and 3 bars on the meter, pages are rendering much s-l-o-w-e-r than what they should.
Going back to either 4.00.16 or even 2k2 is starting to look even better right about now.
Since I upgraded to .21 I do not receive all my calls and do not getting some SMS messages.
I'm testing it until friday and if it keeps this way i'm going back this weekend to .16 which was very very stable and I liked very much.

HTC Magician - no more updates

Not sure if there will be anymore ROM updates in 2006. Pretty much manufacturers will concentrate on their new releases.
Yes, when the 1.13 ROM was released, I heard rumours that that was the last update we're getting.
I believe you guys are right, the Magician has reached the end of its life span. But there never was a generic WWE version of the 1.13, only a few localized builds, right? And how about that weird Radio 1.13? It was never used in an official build.
Looks to me like they just suddenly said 'enough is enough' and then pulled the plug on the Magician...
Am I missing something ?
Hiya,
I saw you guys talking about Rom v1.13 and as far as I know, there is only Rom v1.12 WWE.
Is there any new release ?
Regards,
Bright Star
What exactly do you want? My 1.12 Rom together with the Radio 1.13 works just perfectly, nothing to complain about. Why people always want updates just for the updates' sake? I think we should be happy that we got such a good support for the Magician in the past - this is not common with all Pocket Pcs. I am completely satisfied with my Magician and the current software.
What exactly do you want? My 1.12 Rom together with the Radio 1.13 works just perfectly, nothing to complain about. Why people always want updates just for the updates' sake? I think we should be happy that we got such a good support for the Magician in the past - this is not common with all Pocket Pcs. I am completely satisfied with my Magician and the current software.
So ****ing true!
Re: Am I missing something ?
Bright Star said:
Hiya,
I saw you guys talking about Rom v1.13 and as far as I know, there is only Rom v1.12 WWE.
Is there any new release ?
Regards,
Bright Star
Click to expand...
Click to collapse
Check the ftp or http://www.t-mobile.nl/zakelijk/htdocs/page/service/mda_compact_upgrade.asp
It's complete with radio 1.12 & BB support in the ext-rom.
Cheers, M
The Magician still has a lot of bugs. The more you push your device, the more bugs you will find. Just check around and you will know. But there's also quite a few silly bugs, that should have been fixed ages ago.
For example:
1. A generic bug that everyone have (to the best of my knowledge): if you are in the inbox while receiving a message, the envelope at the top of the screen will have to be removed manually, since it doesn't go away automatically after you have read the message.
2. A more specific bug. I believe this one is related to the setup of your telephony provider, but I am not quite sure. Still, it is a Magician-only bug: After a reboot, a text message will have to be received before the device is 100% logged onto the network. Until then calls can't go through, but are automatically transferred to voice mail. I have this specific bug and replacing the handset didn't help. Neither did upgrading the ROM.
So saying that ppl want updates just for the updates sake, simply isn't true.
HBK said:
The Magician still has a lot of bugs. The more you push your device, the more bugs you will find. Just check around and you will know. But there's also quite a few silly bugs, that should have been fixed ages ago.
For example:
1. A generic bug that everyone have (to the best of my knowledge): if you are in the inbox while receiving a message, the envelope at the top of the screen will have to be removed manually, since it doesn't go away automatically after you have read the message.
2. A more specific bug. I believe this one is related to the setup of your telephony provider, but I am not quite sure. Still, it is a Magician-only bug: After a reboot, a text message will have to be received before the device is 100% logged onto the network. Until then calls can't go through, but are automatically transferred to voice mail. I have this specific bug and replacing the handset didn't help. Neither did upgrading the ROM.
So saying that ppl want updates just for the updates sake, simply isn't true.
Click to expand...
Click to collapse
1. Cant say I've noticed.
2. Does not happen with me.
Same to me, the camera annoys me more.
Overall this is the best device I ever had.
Regards, M
HBK said:
The Magician still has a lot of bugs. The more you push your device, the more bugs you will find. Just check around and you will know. But there's also quite a few silly bugs, that should have been fixed ages ago.
For example:
1. A generic bug that everyone have (to the best of my knowledge): if you are in the inbox while receiving a message, the envelope at the top of the screen will have to be removed manually, since it doesn't go away automatically after you have read the message.
2. A more specific bug. I believe this one is related to the setup of your telephony provider, but I am not quite sure. Still, it is a Magician-only bug: After a reboot, a text message will have to be received before the device is 100% logged onto the network. Until then calls can't go through, but are automatically transferred to voice mail. I have this specific bug and replacing the handset didn't help. Neither did upgrading the ROM.
So saying that ppl want updates just for the updates sake, simply isn't true.
Click to expand...
Click to collapse
1. I haven't noticed this.
2. This doesn't happen with mine.
Jeez, guys! Just because you haven't 'noticed' something, doesn't mean it isn't there! I have been a software developer and professional bug hunter since 1996, so I notice these things, simply because it's my job.
It's also my job to narrow down the bug as much as possible, and in case of bug #2, I can tell you it's related to the Magician being listed as 'busy' on some centrals until the first message is received. So for those of you on centrals with this problem (Ericsson?), just disable the 'forward on busy' setting and you should be ok...
HBK, have you seen any other people on other providers have this bug? I've never heard of it.
The message icon I know only too well, though. It annoys me but it's not a huge issue.
I'm still on 1.11WWE with radio 1.13. Haven't felt a need to upgrade to 1.12 or even the T-mobile (or whatever) 1.13.
I run heaps of programs, many made by small developers that can be a little unstable and not install too neatly but aI gotta say that the operating system isn't bad compared to Microsoft's usual standard of bugs. You just gotta take a look at the latest WMF exploit in XP, 2000 SP4 etc. They'll never get that operating system right! Ok, so can't really compare the 2 but I can't say something good about Microsoft without bashing them in the same post! That's just not me!
HBK,
No offence, but error 2 seems to be very specific though must be highly irritating when you have it. Course there are many bugs, some M$ , some Magician related. Guess we all have to live with them forever, development won't ever be faultless due to several money related aspects of which I'm sure you will encounter in your work too.
Bottomline: my Nokia's have been much more stable & reliable. My Magician is much more capable & fun and my greatest irritation is the number of soft-resets a day due to a hanging camera app. or memory leaks. Sure it's partially all my third party apps & it's a (P)PC with a M$ OS, so I won't recommend a PPC to someone who just wants a phone with some extra's. Much to unreliable/unstable/frustrating. To me it's a hobby & I can live with it. When a patch comes along I try it & judge for myself. Still I'm quite happy with it.
Can't really make out if you're pissed or not (think not), if you are pls try to relax &, I know it's difficult, try to forget your work a bit & have fun with your magician it is possible ;-)
Cheers, M
@jimmy-bish
Actually, I have heard of a few other ppl here in DK having this problem, but it is very rare. That is also the reason why everyone, including the (German) technician who worked on my Magician, thought it was a hardware bug and replaced the motherboard. This means that now I only have the cover left of my original Magician, the rest has been replaced, but still the problem remains...
I have given up on Radio 1.13, since is was never officially released. Instead I am running the latest NL release of 1.13 with Radio 1.12 and Big Storage. Only the MMS part of the Ext. ROM is installed. All in all I believe this to be the best solution, running the latest released software with as few addons as possible.
MS is like a woman: you can't live with MS, and you can't live without! Even though they create heaps of problems, I sure am happy they are here, providing a lot of software we use everyday.
@oltp
Yes, it IS very specific. But please notice that I am not running my Magician on some home made network. I am a costumer of the largest mobile telephony provider in Denmark. This means that they run officially released software on their centrals and thus each and every phone released should be able to run on it, without any exception. Of course it is the responsibility of the phone manufacturer to make sure their product runs under all normally occuring circumstances and in this case, they have failed to do so. So there you have it, a bug in the Magician.
No, I am not pissed off. Although a bit frustrated, perhaps
I can confirm that both bugs exist and still.
You still have to seperate between bugs that are caused by the OS and cannot be corrected by manufacturer specific updates and bugs that are caused by the hardware, which certainly also cannot be corrected by an update. Besides that both bugs don't sound anywhere severe to me, the first one must be OS specific, the second one - well, I didn't ever realize it and never had this behavior. My device logs into the network without problems and without having to receive any messages. I never heard about or experienced myself problems with incoming calls.
I would recommend everyone to use Radio 1.13 since 1.12 was really crappy and 1.13 made a big difference for me and many others. Since that version, I don't have anything to complain about anymore.
dandie, what specific issues did the Radio 1.13 solve for you?
Please notice that the two bugs mentioned were only used as examples. They were just on top of my head. I believe a good handfull of other bugs are already described on this forum. No doubt a lot of people experience other bugs every day, but just aren't as loud about it.
@Dandie
Of course both bugs are Magician specific, or they would have been well known on all MS Mobile sites, regardles of devices. Just like the one with the SD card being deleted by WM2003SE, from time to time.
What do you mean that it isn't a severe problem if you can't receive calls on your phone? Are you kidding?
In many countries, including Denmark, ppl on average send/receive hundreds of messages each month, so bug #1 is a problem many times each day for a lot of us.
So what is a severe problem then? Does the device have to explode in your face on a daily basis or something like that?
I used the Radio 1.13 for several months and even though it seemed ok, it didn't fix any problems. So I went back to the latest Radio released, the 1.12.

What's wrong with my Universal? Please help.

So, I have been having problems with my PDA lately. It refused to turn on randomly. With other ROMs, it randomly crashed, or rebooted, or I just had blank white or blue screens. Different problems with different ROMs -- but all random. Lately its so bad, it rendered my PDA useless -- now sometimes it doesn't even boot, the blue imate bootscreen gets corrupted...
What's wrong? I'm suspecting RAM problems, which ain't good
Hi KTamas!
Try putting it into bootloader mode and from there, do a complete OS+radio ROM upgrade.
Use the latest 1.15 radio along with the latest official ROM. I would prefer the official O2 ROM. Go to the below link to download the latest O2 rom. For phone number, it will take any number
http://www.my-xda.com/xdaExecSoftware.jsp
Best of luck!
kdskamal said:
Hi KTamas!
Try putting it into bootloader mode and from there, do a complete OS+radio ROM upgrade.
Use the latest 1.15 radio along with the latest official ROM. I would prefer the official O2 ROM. Go to the below link to download the latest O2 rom. For phone number, it will take any number
http://www.my-xda.com/xdaExecSoftware.jsp
Best of luck!
Click to expand...
Click to collapse
Been there, done that. A dozen times. Tried serveral AKU2, AKU3, Crossbow ROMs. Different behaviors on different OSes, but all unstable one way or another (well, one time, one AKU2 was mostly stable... well, mostly... but when I went to crossbow, then back to AKU2, it got worse).
hmm..indeed a problem unheard of.
Have you tried flashing it with AKU1.x rom? They are, i guess, avaliable on imate's FTP
kdskamal said:
Use the latest 1.15 radio
Click to expand...
Click to collapse
What advantages does 1.15.00 have over 1.14.10? I'm right on the border of a 3g cell and OCCASIONALLY get a 0 bar 3g signal, so am just after the best radio rom to get a strong clear signal.
Thanks!
gquipster said:
What advantages does 1.15.00 have over 1.14.10? I'm right on the border of a 3g cell and OCCASIONALLY get a 0 bar 3g signal, so am just after the best radio rom to get a strong clear signal.
Thanks!
Click to expand...
Click to collapse
Elsewhere on the forum, there is a post which say that the difference between 1.14.1 and 1.15 was minimal and that there should in fact be no differences between the way they operate.
However, that was in the midst of a number of posts which all said how much more reliable 1.15 and that the Uni felt faster with it.
KTamas said:
Been there, done that. A dozen times. Tried serveral AKU2, AKU3, Crossbow ROMs. Different behaviors on different OSes, but all unstable one way or another (well, one time, one AKU2 was mostly stable... well, mostly... but when I went to crossbow, then back to AKU2, it got worse).
Click to expand...
Click to collapse
Remember, no ROM is entirely stable but you do sound like you have a hardware fault.
KTamas said:
So, I have been having problems with my PDA lately. It refused to turn on randomly. With other ROMs, it randomly crashed, or rebooted, or I just had blank white or blue screens. Different problems with different ROMs -- but all random. Lately its so bad, it rendered my PDA useless -- now sometimes it doesn't even boot, the blue imate bootscreen gets corrupted...
What's wrong? I'm suspecting RAM problems, which ain't good
Click to expand...
Click to collapse
Have you tried a new battery? I was having similar problems and took it to the service centre and they confirmed it was the battery (mine was about 14 months old). All working fine now with a new battery!
robmeik said:
Have you tried a new battery? I was having similar problems and took it to the service centre and they confirmed it was the battery (mine was about 14 months old). All working fine now with a new battery!
Click to expand...
Click to collapse
Could be a good solution!
Regards
robmeik said:
Have you tried a new battery? I was having similar problems and took it to the service centre and they confirmed it was the battery (mine was about 14 months old). All working fine now with a new battery!
Click to expand...
Click to collapse
My battery is around 9 months old. Anyways, I took my Uni to a private repair center... I hope they'll be able to fix it.
Please let us know what the problem is but I think its a voltage control unit of the mainboard.
i had some issues a couple of months ago.. tried all the roms, drove me mad... turned out to be due to some corrupt sectors on my sd card.. bought a new one and my Uni was rocksteady (well kinda) as ever =]
good luck

HTC TyTN (HTC Hermes 300) very slow and sluggish

Hi there,
I'm new to this forum - and new to the whole Windows Mobile idea as I'm normally an avid Apple fan but I do make an exception when it comes to the phone as the iPhone (as of yet) is quite 'useless' when it comes functionality and flexibility compared to a Windows Mobile device.
In either case, I've recently flashed my MDA Vario II and, after having used Black Satin for a day or two, put on Schap's 3.60a WM6 ROM. The only reason i did not like Satin was that it combined the inbox/outbox for MMS and SMS messages (knowing my luck I'm sure there would have been an easy way around that).
Right, ever since I put on the WM6 ROM and installed a few other applications, such as Spb's Mobile Shell, Spb Weather, etc etc the phone seems to be incredibly sluggish and slow. I did a full re-set and then installed one application at a time to see if it has something to do with a particular bit of software. But I don't think that's the case as the phone acts pretty slow even with nothing installed after the hard re-set. But now, after a few days, it takes, for example, around 15seconds to show the Windows directory using either File Explorer or Resco's explorer. The start-up progress, especially the transition from the Splash Screen to the standard Home Screen is incredibly slow and happens in stages. It then takes about another 30 seconds for the keypad to come up, asking for my PIN.
I've been running all sorts of utilities such as MemMaid, PocketMechanic and SKTools to make sure that the device is in 'mint' condition but, if at all, this made little change to the overall speed.
I expected the phone to run slightly slower under WM6 compared to WM5 as, strictly speaking, the TyTN, as I understand it, was not designed with WM6 in mind - which may be the reason why a lot of providers here in the UK do not offer a WM6 upgrade. However, the phone has become uncomfortably slow and sluggish so is there any way to speed it up or is this a known issue with WM6 on the TyTN?
Also, not sure this is the right forum for this but I also tried to set up Direct Push and it works fine - only problem I have is that it does not seem to support WiFi (it does when I check manually but as soon as I utilise the Direct Push function, the phone insists to connect to the 3G network). Now this is not necessarily a big problem as I've got an unlimited data plan but when at home I am using WiFi and there is little point in having both switched on, WiFi and the Data Connection as that does drain the battery. Again, any ideas to solve this would be appreciated
Thank you guys
Hello mate,
Not sure why you are having the problems you are having. Anyway I run Schaps on my Tytn (see my sig), together with SPB products without any problems at all. The whole lot is rock solid.
My suggestion would be that you re-flash your device with the combination of ROM and Radio that I use, given I have confirmed no issues. If that works then you have at least proved your device is ok. If it doesn't work then your problem lies elsewhere, probably with the device.
Strong advice - make absolutely sure you have done all the things and taken all the precautions outlined in Mr Vanx's excellent guides (see here http://www.mrvanx.org/cms/)
I will track this thread to see how you get on.
Cheers
WB
Hello there...
How was your device under Satin? I am running Satin on an 8525, and it runs ok. Black Satin is also a WM6 rom. I am running HTC home, pocket breeze and iLauncher. SPB tends to let it slower, but not that slow for sure.
I suggest you read through the specific thread of Schaps 3.60. I am not sure, but i once read a few posts, and if i recall correctly, there were some problems with the version. Either that or 3.57... don't know for sure.
I also suggest re-flashing with a different rom. Or, read through the Satin thread here at XDA-devs or at 4winmobile, and there might be a fix for the mms/sms thingy. Then go back to Satin. There is also the Black X going on, but I think it is still beta...
Just don't forget to follow Mr. Vanx precautions, specially installing HardSPL v7, if you don't want a bricked device.
Let us know how it goes
Hey there,
Thanx for replying. I have been thinking about re-flashing the ROM but to see if that helps. I have been playing with the phone a lot so I may have somehow done something which I shouldn't have - whatever that may be :S
Can I ask ... in your sig you state that the 1.50 Radio is very buggy - what are the issues with it, cos I am using that one and was wondering if that could possibly be related to it?
Thanx for the replies guys. I've decided to re-flash the ROM and, it seems to be working fine again. I actually think the phone works slightly faster now as it did under the T-Mobile WM5 ROM. I haven't updated the Radio and stuck to 1.50 as I've read somewhere that it's working fine for the UK (lemme know if I'm wrong - they say there would be a noticable improvement in 3G reception, but I haven't seen that, but I dont seem to have any major issues with 1.50)
So, fingers crossed the phone won't slow down again - which I guess it shouldn't and I'll be careful what I install on it, making sure I have the latest versions of everything.
Thanx again for all your suggestions
Flipside,
Radio 1.50 caused me loads of problems; dropped calls, not being able to make a call for no reason, people not being able to reach me even though the phone was on and in an excellent signal area, having to reboot to get the radio to switch on, etc, etc.
Have not looked back since i went to 1.47. The lesson learnt for me was not to jump at the latest radio rom, just because its the latest. Latest does not necessarily mean best for ones particular circumstances.
Cheers
WB

Issues with my HD2 (Optus Australia - Italian Fone)

Been having some problems with my HD2 as of late. If this is the wrong forum to post, please point me elsewhere.
Purchased original one via Mobicity - turned out it was a HK version. I dropped it and smashed the screen, so got a replacement one (purchased thru Mobicity again) under my insurance.
Not sure the origins of the second fone though. When it arrived, it was in Italian. Had to send it back to M/City to reflash it with (what I believe to be ) a WWE version.
Details on startup screen:
R 2.00.51.07
G 15.30.50.07U
D 1.66.76641
Have left the phone as-is after it was reflashed with an English ROM and returned to me. Has worked perfectly for about 8 months. Recent issues only occurring last 2 months or so.
Issues having lately:
* Randomly reboots itself - completely randomly. Sometimes, while not even touching the phone, sometimes while typing a text or browsing the net.
* Battery usage lately has been horrendous. Hard to pin an exact figure on it, but it's MUCH MUCH worse than usual, over the last 2 months.
* CONSTANTLY dropping signal & Data connection. I can watch the data/signal symbols switch from nothing, to G, to 3G, to H, and back again within the space of seconds. On occasions, when the data-conn drops out (but fone signal remains), I go into connection settings and find the Data Settings slider is switched off! I must manually go and turn it on again... which sometimes works, and sometimes fails to stay on.
I HAVE manually gone into the settings and told it to update to the latest data settings from my provider (Optus) and it always responds that I already have the latest settings.
Often, the only way to get data connection back is to manually reboot the whole fone.
Sometimes, while browsing a simple website on the fone, it will drop connection. I live in Brisbane. Optus advises Brisbane has absolute FULL coverage, until you start going outskirts. I can be in the city centre gardens (no big buildings to block signals) and still not achieve full "H" or even "3G" speeds... most times only achieving simple "G" speeds.
This is obviously not right I HAVE contacted Optus about this, and they suggest it is an issue with the phone, as they insist they have full coverage brisbane-wide.
I have also noticed, in the last 2-weeks or so, that Cookies Home Tab is not working correctly all the time.
On occasions - but not ALL the time - on my home-page CHT displays appointments that are already passed days or even weeks ago.
Sometimes, when adding a new appointment (either manually in the fone, or via the MyPhone website and synching), it will not display at all in CHT.
I know there is a new version of CHT, but some of the technical info on the website sounds like there can be issues with not correctly un- or re- installing it.
I've still got a couple of months left for my manufacturer warranty.... I'm not keen on reflashing with un-official ROMS until after that period has elapsed... then i'm keen to go for it. If that is my only option, then I will consider, but would prefer a "genuine" fix first.
Can anyone please offer some suggestions, hints, experiences ? I haven't been on the forums for months, and now the HD2 thread is some 10-episodes of 30+ pages, so I have no hope in hell of reading thru all that hoping to find an answer.
Suggestions please for possible reasons, or fixes, or a different WWE English ROM to flash to ?
Note also: My serial number does not appear to be Asian in origin. I have tried to d/l the Asia Pacific, the Worldwide, and the HK latest ROMS... but it fails upon serial number. I have not tried, but I assume my fone is Italian model, hence any ROM that I flash must be d/loadable from another source, not the HTC website.
Please also note: I'm not - at this point - interested in running Android, so (without wanting to sound ungrateful) if any help could avoid suggestions of that nature please.
Thanx in advance for any assistance.
spinifex74 said:
Been having some problems with my HD2 as of late. If this is the wrong forum to post, please point me elsewhere.
Purchased original one via Mobicity - turned out it was a HK version. I dropped it and smashed the screen, so got a replacement one (purchased thru Mobicity again) under my insurance.
Not sure the origins of the second fone though. When it arrived, it was in Italian. Had to send it back to M/City to reflash it with (what I believe to be ) a WWE version.
Details on startup screen:
R 2.00.51.07
G 15.30.50.07U
D 1.66.76641
Have left the phone as-is after it was reflashed with an English ROM and returned to me. Has worked perfectly for about 8 months. Recent issues only occurring last 2 months or so.
Issues having lately:
* Randomly reboots itself - completely randomly. Sometimes, while not even touching the phone, sometimes while typing a text or browsing the net.
* Battery usage lately has been horrendous. Hard to pin an exact figure on it, but it's MUCH MUCH worse than usual, over the last 2 months.
* CONSTANTLY dropping signal & Data connection. I can watch the data/signal symbols switch from nothing, to G, to 3G, to H, and back again within the space of seconds. On occasions, when the data-conn drops out (but fone signal remains), I go into connection settings and find the Data Settings slider is switched off! I must manually go and turn it on again... which sometimes works, and sometimes fails to stay on.
I HAVE manually gone into the settings and told it to update to the latest data settings from my provider (Optus) and it always responds that I already have the latest settings.
Often, the only way to get data connection back is to manually reboot the whole fone.
Sometimes, while browsing a simple website on the fone, it will drop connection. I live in Brisbane. Optus advises Brisbane has absolute FULL coverage, until you start going outskirts. I can be in the city centre gardens (no big buildings to block signals) and still not achieve full "H" or even "3G" speeds... most times only achieving simple "G" speeds.
This is obviously not right I HAVE contacted Optus about this, and they suggest it is an issue with the phone, as they insist they have full coverage brisbane-wide.
I have also noticed, in the last 2-weeks or so, that Cookies Home Tab is not working correctly all the time.
On occasions - but not ALL the time - on my home-page CHT displays appointments that are already passed days or even weeks ago.
Sometimes, when adding a new appointment (either manually in the fone, or via the MyPhone website and synching), it will not display at all in CHT.
I know there is a new version of CHT, but some of the technical info on the website sounds like there can be issues with not correctly un- or re- installing it.
I've still got a couple of months left for my manufacturer warranty.... I'm not keen on reflashing with un-official ROMS until after that period has elapsed... then i'm keen to go for it. If that is my only option, then I will consider, but would prefer a "genuine" fix first.
Can anyone please offer some suggestions, hints, experiences ? I haven't been on the forums for months, and now the HD2 thread is some 10-episodes of 30+ pages, so I have no hope in hell of reading thru all that hoping to find an answer.
Suggestions please for possible reasons, or fixes, or a different WWE English ROM to flash to ?
Note also: My serial number does not appear to be Asian in origin. I have tried to d/l the Asia Pacific, the Worldwide, and the HK latest ROMS... but it fails upon serial number. I have not tried, but I assume my fone is Italian model, hence any ROM that I flash must be d/loadable from another source, not the HTC website.
Please also note: I'm not - at this point - interested in running Android, so (without wanting to sound ungrateful) if any help could avoid suggestions of that nature please.
Thanx in advance for any assistance.
Click to expand...
Click to collapse
Hi, I to have an HD2 in Oz from Mobicity - though never got an Italian version. To be honest, the only time I had an issues like those you are talking about was when I flashed new roms WITHOUT 'Task 29' first. Look it up. It kind of "cleans up" your phone inbetween cooked roms. But as you have only had Official roms on your phone, this might not be the issue.
To be honest, I don't think you Task 29 anyway until you put HSPL on your phone (this allows you to put cooked Roms on), but as soon as you do this, you void your warranty. Now you can take HSPL off before you send it back, but if your phone was to die BEFORE you took it off and then you sent it back, you'd be ****ed if they managed to power it up.
As you're under warranty, I'd send it back to be fixed and explain the fact that they had another rom on when you first got it.
Ra-ey
ps. You may want to quickly check online to make sure you are running the most uptodate Rom for your phone on the HTC website.
Hi,
Did u try hard-reseting your phone by pressing the volume up and down and the power button at the same time. Usually fixes many issues relating to yours. It might have been caused by a programs problem which corrupted main system files.
Luckych
Thanx guys for responses.
luckych said:
Hi, Did u try hard-reseting your phone......
Click to expand...
Click to collapse
Not yet, no..... will go through that process tonight. Was just worried that hard-setting it MAY end up back with the Italian settings (on the off-chance it still has an Italian ROM, but has just been set to display in English) ???
Can anyone identify the ROM details in my original post, as being WWE (I assume this means World Wide English?)
I cannot find anywhere that lists if those numbers mean WWE or English ?
Further to this... i just found this thread here: http://forum.xda-developers.com/showthread.php?t=791436
This is almost exactly what my phone is doing too, so I suspect it may be the same cause.
One thing I forgot to mention in my original post here, is that sometimes, after the fone reboots itself, it fails to boot up again and all the handset buttons fail to respond. The little red reset button does not work either.
Doesn't happen EVERY time, but occasionally, the only way to resurrect the phone is to remove the battery for 30 mins or so, then reinstall and try again.
Obviously a very real issue - and it seems a known one - perhaps time to return for warranty fix or replacement.
Thanx all for responses in this thread - I will monitor the other thread now for further news.
when you hard-reset it reverts it back to the last rom you had, if it was WWE then it would reload that.
Remember when someone load's another rom on your phone it complete (kinda) erases the old rom and replaces it so there would be nothing that would revert it to the italy ROM.
R 2.00.51.07 (Radio Version)
G 15.30.50.07U (Protocol version)
D 1.66.76641 (ROM Version) could be anything
Usually the Italy ROM only has one language in the rom so my guess would be it has the WWE, by looking at the numbers above no-one would be able to tell you what you what rom it is.
Hope this helps
luckych said:
when you hard-reset it reverts it back to the last rom you had, if it was WWE then it would reload that.
Remember when someone load's another rom on your phone it complete (kinda) erases the old rom and replaces it so there would be nothing that would revert it to the italy ROM.
R 2.00.51.07 (Radio Version)
G 15.30.50.07U (Protocol version)
D 1.66.76641 (ROM Version) could be anything
Usually the Italy ROM only has one language in the rom so my guess would be it has the WWE, by looking at the numbers above no-one would be able to tell you what you what rom it is.
Hope this helps
Click to expand...
Click to collapse
Thankyou mate.... that makes it a lot clearer
Will try the hard-reset method tonite and-reinstall only the apps (if it ok to use that term, for WM programs !!!) that I need.
Have also been given a link to the latest WWE ROM to flash, from Mobicity, so will hard-reset, to clear any crap, then re-flash with the new ROM.
Just curious... I know I should remove the memory card when resetting/reflashing (i'm not doing dual-boot with Android), but should I also remove the SIM card too? Eg: Get the background system installed and running, then power-off, insert SIM, power-on to get the network specifics up and running ???
My Guess
I have a Telstra HD2, running the latest Telstra ROM and CHT 1.8.5. The phone reboots regularly of its own accord. Seems to be related to overheating as the base of the phone is quite hot when it reboots. If the phone get really hot, it will not re-start (stays at white screen). Have had to put the phone in the fridge to get it to work.
I don't know if this is related but I have a cradle that I use to connect my HD2 to my work PC. If the HD2 is running SenseUI, after the HD2 was been in the cradle for a while, the HD2 re-starts. This does not happen if I disable SenseUI. It seems that the restart only occurs after the battery reaches 100%.
The restarting occurs with CHT 2.0 beta as well.
When I get a chance, I'll do a hard reset and see if that fixes the problem.
Cheers
Hmmmm....... seems to be a recurring issue with some of the "newer" phones. My original phone - before I dropped it and smashed the screen - never had any of the issues I'm currently experiencing
I've read somewhere on here that the rebooting issue is suspected to be from early-production snapdragon processors..... which SHOULD be an immediate warranty claim, in my opinion.
I will try the hard-reset, and then a fresh Official ROM install, to see if it solves it.

Categories

Resources