Related
Cause that an MDA2 shows me the dlls in MS File Explorer and the other not, I made a Backup from both devices on SD Card , than hardreset devices and made a restore ofter changing the cards.
Now I see dlls on the other device in Fileexplorer,on the first not more. ( registry setting?? )
But now a great problem :
If I klick on VB.Net.exes they dont start.
When I try them to install again from VS.net it cant connect to devices and message comes that I should check if they are physically conncet to PC.
Active Sync works properly.
What could this be and how to solve this ?
Any idea whats wrong when I cant transfer any files to Xperia through Windows Explorer? I open device, doesnt matter if I try to upload to main memory or storage card and system says The file XXX could not be copied. It may not exist or cannot be transferred.
Same situation on tvo computers, probably something wrong in Xperia. I know that hard reset would proly help, but it is last option...
UPDATE so tried to solve my problem and found out, that there is something wrong with WMDC and sync. When I connect device on one of my two PC, it installs driver but in WMDC is just red cross and text Error. Nothing else. Tried to disable advanced network support in USB2PC, tried to reinstall WDMC even with deleting stuff in registry. Still no help - I dont want to do hard reset, so many programs already installed and tuned
strange is that it shows in Sync Center as guest and I'm able to see files, but not upload anything nor sync data
EDIT Tried:
-reinstall WMDC
-reinstal WMDC with registry cleanup (HKLM\Software\Microsoft\Windows CE...)
-disable firewall
-disable advanced network services in USB2PC settings
-run net localgroup Administrators /add Local Service (found in some thread)
-deleting driver for X1 in device manage (Mobile Devices\X1a)
-clean sync data from ActiveSync in mobile, resulting just in empty contactlist and still not being able to sync
-delete windows mobile network driver in device manager resulting in device not being detected anymore, althrough net driver shows up after conection
getting bit desperate now
So hard reset is on the way...lets see if it helps.
Hard reset should work.
I was able to sync when I first setup the x1, then I added the owner information to the device, sync failed after that. I did a hard reset and setup owner information first then sync with wdmc, sync works every time now. (I think wdmc registered owner information during initial sync to the device, I maybe wrong but I am too lazy to test my theory since I got it working now)
do you recall when you added owner information? prior or after the intial sync to wdmc.
changed owner info long time ago, after sync - it was fine.
I can recall that yesterday I used SK Tools to clean X1, and also deleted some strange files in root of memory (some with extension .vol). Dunno if it was what caused problem...
EDIT and yes, hardreset worked
i had this problem.. what i did.. opened sync center..deleted the device.. readded it through device center. problem solved?
there was only red circle with X and message Error, nothing you can do
ya this happened to me. in sync center in vista (not sure bout xp) u can deleted the device. do so, then readd it using the windows mobile device center (partnership blahblah) and it should work again :S?
No, only think which helped was hard reset. And now it happened again, getting quite mad about it
Same problem for me !!
Red circle with an X in windowss vista but all OK on my other machine (win XP)...
Maybe a ROM bug ??
I am using USA NorthAmerican generic stock ROM
Which ROM do you have ??
EU stock (bought in Czech Rep.). My also works with ActiveSync on XP, byt not with WMDC on Vista (2 machines tested). Crap crap crap - only solution I found is to reset and reinstal device
Hi ppl. I'm new in the world of Win. mobile and Smartphones.I have an Xperia ( simlockfree logofree ) in dutch.
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
ROM versie: 1.02.937.3
ROM Datum: 08/29/08
Radioversie: 1.06.25.29
Protocolversie: 52.43.25.24U
Uitbeidingversie: 1.0.55513.1119
Modelnr: X1i
R1AA017 R8A 1215-3311 GENERIC_NL
The phone seems to have some problems. ( restarts sometimes , loong loading time , frizing...etc ). I got back to the dealer and ask for warranty. He sed that the problem is for shure software and i can make an update SEUS. I tried for 3 days to do it and i can't. I have Vista Ultimate 64-bit SP1. The new and fresh Win mobile device center 6.1, working USB ports , different USB cables.I have no firewall.My phone connects without any problems and makes syncronization with sync center. The problem is in bootloader mode. I hear a connection sound , but the SEUS and the sync center doesn't see it. In system/device manager i see it as - mobile usb sync device ( or something like that ).The phone shows 3 colors and serial message . When i put the usb cable in , it changes to usb message. Doesn't do anything else. I tryed with/without SD card , restart , reinstall , reset , change ports , cables , drivers, win updates......all the advice in the forums except changing PC ( i have only 1).......Nothing.
I wanted to see if it's broken or not. I don't want to try hardspl flashing or anything else until i'm 100% shure that the phone is good. I don't want to give the f$%^&rs any reason to deny the warranty. So my question is : is there a solution to be able to connect to the SEUS in bootmode screen?
PS -- if it works i'll go for an different ROM-- i'm not dutch , and neither english , so pls excuse all the errors in this post.
Ty for taking the time to read this post.
Of curse thar iz. Iz da nurmall way! Use tha search-funkjon! Ya hav ta use tha natif Administrator-Account uf Win Vistaz!
karakay said:
I have Vista Ultimate 64-bit SP1.
Click to expand...
Click to collapse
Thats the Problem. I've got the same Problem with Vista (regardless if 32/64 bit).
This problem occures very often. Try it with Windows XP !
fdmedia said:
Thats the Problem. I've got the same Problem with Vista (regardless if 32/64 bit).
This problem occures very often. Try it with Windows XP !
Click to expand...
Click to collapse
TRY IT WITH ADMINISTRATOR ACCOUNT! Are you guys nuts?
I have the same problem. I've got only 1 account and it has status of administrator. I have run SEUS with admin privilages and no effect ;/
Abuk007 said:
I have the same problem. I've got only 1 account and it has status of administrator. I have run SEUS with admin privilages and no effect ;/
Click to expand...
Click to collapse
This is NOT TRUE ADMIN! Why don't you check this out and solve your problem: http://www.computerperformance.co.uk/vista/vista_administrator_activate.htm
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Abuk007 said:
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Click to expand...
Click to collapse
Yeah it's strange, so far SEUS is the only use for it lol.
Abuk007 said:
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Click to expand...
Click to collapse
My account is admin but I can't still to see X1 goes further after connect mini-USB cable into X1. Any help?
I have admin account . The super-admin account . I did that already...forgot to mention it. Any other solutions?
karakay said:
I have admin account . The super-admin account . I did that already...forgot to mention it. Any other solutions?
Click to expand...
Click to collapse
Perhaps it is a 64-Bit issue. I can tell you from my experiments that under Win Vista 32-Bit it is most likely a problem of the USB driver. At least I don't think it's a software issue (By software I mean an application). If you run Windows XP on VirtualPC with USB "Passthrough", SEUS will not work either. So it must be a low-level problem of Vista. As you may know, Vista has a new driver system. I believe the 64-Bit version differs from the 32-Bit version in function.
Last week I checked SEUS with my Xperia and detected it correctly. But yesterday SEUS didn't recognize my X1. I didn't make any changes on my X1 since last week. I used Hard SPL to remove my custom Vodafone ROM 3 months ago, and I update to the official R2 without problems. I have the same problem that all of people who posted here. We need a solution because it's very strange this. Maybe SE made some change in his SEUS to avoid people who used Hard SPL update by the official way? Thank you very much. Best regards
VISTA is the problem......... With the help of an XP PC i used SEUS with no problems. Anyway....i steel have Vista PC , so if there will be an solution for future updates pls post them here. TY
i don't have Vista, XP but same problem...
Persuader X, does it say to you "loading...no image file"?
Sapa13 said:
Persuader X, does it say to you "loading...no image file"?
Click to expand...
Click to collapse
Yes. When I connect it, the color bars disappear and start the progress bar that appears when a ROM is being installed. After a pair of seconds, Xperia reboot and says "no image file "., and comes to the boot screen with color bars again to rest in that state forever.
Let me quote myself
I heard of some people that SEUS ran on Vista when they removed the tick for the USB-connection in the mobile device center. Maybe that helps.
Other said, that they had to install the new driver for the USB-sync-connection; just let Windows Update run while your X1 is in the bootloader-mode connected with your PC - maybe try this more then once; my Windows Update needed four runs to find the driver
Click to expand...
Click to collapse
One of the two points will help you too, you'll see
Hey guys, I can update finally. Try this, like me.
Restore stock Hard SPL. It's posted in this forum.
Run SEUS in the administrator account of Vista.
If you don't do any of the 2 previous things, it won't work!
Best regards.
Hi!
Solution from http://forum.xda-developers.com/showthread.php?t=519317&referrerid=1836412
Clear the Checkbox : USB Connection allowed, in the Vista Mobile Devicecenter (before connecting the USB cable to X1). After that the SEUS can identify the X1 and continue with the guide.
Regards
Marcus
Thanks to Marcus that was the perfect solution i spent 6 hours trying to figure this out you are the first one to offer a non flash option.
Cheers
Hi all
i'm using rhodium and i try to synchronize it with my outlook 2007 on windows seven ultimate.
drvupdate-amd64.exe for windows device center
but impossible to connect it i have : Microsoft Windows Mobile Remote Adapter driver with pb...
i try to uninstall reinstall many times...i never have this pb before..
first i used the original rom from htc the newest with 6.5 but impossible to connect with WMDC..
try to reinstall with nrgz28 rom...but same...
i will try to reinstall old rom from htc...but i'm not sure it will work...
do you have any idea?
(if i uncheck "Enable advanced network functionality" on usb to pc, seem to connect but nothing more happen or very very very very very slow...)
thanks
ps 1 : install first rom of htc original one...always same pb...please help need to connect it !
up..please need help
Microsoft Windows Mobile Remote Adapter always wrong....
up up up up up
kwanice said:
Hi all
i'm using rhodium and i try to synchronize it with my outlook 2007 on windows seven ultimate.
drvupdate-amd64.exe for windows device center
but impossible to connect it i have : Microsoft Windows Mobile Remote Adapter driver with pb...
i try to uninstall reinstall many times...i never have this pb before..
first i used the original rom from htc the newest with 6.5 but impossible to connect with WMDC..
try to reinstall with nrgz28 rom...but same...
i will try to reinstall old rom from htc...but i'm not sure it will work...
do you have any idea?
(if i uncheck "Enable advanced network functionality" on usb to pc, seem to connect but nothing more happen or very very very very very slow...)
thanks
ps 1 : install first rom of htc original one...always same pb...please help need to connect it !
Click to expand...
Click to collapse
Ok, here goes. I thought I had the same problem but all in all wm device center installed and I could sync, but not before searching and searching.
First and foremost, make sure wm device center is installed and updated with windows update.
2. Plug in device and wait for it to say that device software is installing.
3. Click on start button, and right click on computer. Select manage.
4. Up comes computer management.
5. Select device manager
6. Open network adapters and look for Microsoft Windows Mobile remote adapter and right click on it. Select uninstall.
7. Once it is uninstalled unplug your device and plug it back in. Should be noticed and installed and able to sync again.
I am also using windows 7 64 bit with a new TP2. If that does not work, go to this website and it has other possibilities....
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-troubleshooting.mspx
Good luck and let us know if you get it working.
thanks for your answer but..doesn't work :s
I've tried with my old phone my kaiser and it's work !...:s it's amazing...
i've plug after my tp2 and it's not working!... i've tried it on seven 32bits on another pc and it's work!... :s
i dont understand...:s
Ok, do this. Open task manager and go to Processes tab. Scroll to the bottom and look for wmplayer.exe. It shouldn't be there. Now plug in your device and watch for it to come up. If it pops up and then goes away then let me know and we'll go from there.
i never used wmplayer...
and it's not in my process...
sorry
kwanice said:
i never used wmplayer...
and it's not in my process...
sorry
Click to expand...
Click to collapse
It's not a matter of you using it or not. When you plug in and your computer recognizes it, you'll see wmplayer.exe come up and should stay up while being connected. Try one of your good phones and you'll see it pop up and stay. Just make sure you have task manager up and on Processes.
If it pops up and then goes away, there is a work around but is a big pain in the butt.
You could also have a bad phone. I know one of my HTC Advantages went bad and I had to send it in for a new one because it could not be recognized at all. I even went as far as doing a fresh install on the computer hoping maybe that would work. Turns out nothing did.
Let me know if you see the wmplayer come up or not.
I have also read that it could be a .dll issue, but if it won't work on any other computers that are working fine, then I'm going to run with a bad device.
i try with my kaiser : no wmplayer.exe or else opened juste programm for synchronisation..
and when i plug my tp2 nothing hapened..:s
crazy thing...
will i put it in my trash ? or buy an iphone lol....:s
ps : thanks for your help
kwanice said:
i try with my kaiser : no wmplayer.exe or else opened juste programm for synchronisation..
and when i plug my tp2 nothing hapened..:s
crazy thing...
will i put it in my trash ? or buy an iphone lol....:s
ps : thanks for your help
Click to expand...
Click to collapse
I had to edit because I realized I was wrong with windows seven. I believe you might have a bad phone. Have tried using mtty yet?
mtty for?
to see if i can communicate with the phone? for what use?...
thanks
mtty checks the usb connection on the device. You disable usb in activesync/windows mobile device center and then plug in your phone. Run mtty and select usb from the drop down. Then there are several codes you can enter to check for usb connectivity. What the codes are I don't know off the top of my head, but you can do a search and it will give you them on the forums. It is actually a pretty small but usefull piece of software.
thanks a lot for your advice !
i will try tomorrow too tired tonight
i think it will be the last chance after i think i will go where i bought my phone to change it, maybe there is a probleme with my phone...
thanks again
so i try this morning...
impossible to see in mtty the USB port....:s only com1 and com2
i only see usb port when i plug my phone on bootloader and i saw USB on the bottom of screen but i cant do anything....nothing work
when i plug my phone on windows seven, i can choose activesync or disk or internet share : and only the first doesnt work...:s i can use my phone like usb driver or share my internet connexion ...
i think i will phone to the shop because i'm become to be crazy !
hi so i try to test several thing :
on my P4 on windows seven 32b
- kaiser : OK
- Rhodium : OK
on my i5 750 asus p55d seven 32Bits
- Kaiser : OK
- Rhodium : NO
on my i5 750 asus p55d seven 64Bits
- Kaiser : OK
- Rhodium : NO
i dont understand...seem to have a problem with my rhodium with my computer !
i dont know why...:s very space!
have an idea?
kwanice said:
hi so i try to test several thing :
on my P4 on windows seven 32b
- kaiser : OK
- Rhodium : OK
on my i5 750 asus p55d seven 32Bits
- Kaiser : OK
- Rhodium : NO
on my i5 750 asus p55d seven 64Bits
- Kaiser : OK
- Rhodium : NO
i dont understand...seem to have a problem with my rhodium with my computer !
i dont know why...:s very space!
have an idea?
Click to expand...
Click to collapse
I know this sounds like a stupid question, but have you ran a registry cleaner or defrag program on your windows seven machine? If no then again I'm at a loss and will research this some more since I have time tonight. If so, then that more than likely is the culprit because I have ran different registry defrag/cleaner programs and once done, then windows mobile device does not function properly and I have to restore the registry from the back up that I would make prior to deletion. We'll get it figured out.....I hope.
it's really amazing... i try all the settings and all os...
for th e last try ..i try to update my bios....
and..
IT WORK'S !!
i dont know why..:s i dont know if the bios is really the problem...
when i flash the bios, Microsoft Windows Mobile Remote Adapter is ok ! without problem !
i need to delete one time the partner ship
and now all is ok !
i want to say : Just about right you are great ! you are the only one in this forum who try to help me, and it's so good! thansk again a lot my friend ! if i can help you pm me
bye !
kwanice said:
it's really amazing... i try all the settings and all os...
for th e last try ..i try to update my bios....
and..
IT WORK'S !!
i dont know why..:s i dont know if the bios is really the problem...
when i flash the bios, Microsoft Windows Mobile Remote Adapter is ok ! without problem !
i need to delete one time the partner ship
and now all is ok !
i want to say : Just about right you are great ! you are the only one in this forum who try to help me, and it's so good! thansk again a lot my friend ! if i can help you pm me
bye !
Click to expand...
Click to collapse
I'm glad you figured it out and it is strange that the BIOS fixed it, but hay if it worked, great. I know this is a constant issue for wmdc and windows mobile devices, so that is why I tryed to help out. I gave you what I learned from my experiences and searching this forum like crazy. Thank and I might take you up on the PM one day.
kwanice said:
Hi all
i'm using rhodium and i try to synchronize it with my outlook 2007 on windows seven ultimate.
drvupdate-amd64.exe for windows device center
but impossible to connect it i have : Microsoft Windows Mobile Remote Adapter driver with pb...
i try to uninstall reinstall many times...i never have this pb before..
first i used the original rom from htc the newest with 6.5 but impossible to connect with WMDC..
try to reinstall with nrgz28 rom...but same...
i will try to reinstall old rom from htc...but i'm not sure it will work...
do you have any idea?
(if i uncheck "Enable advanced network functionality" on usb to pc, seem to connect but nothing more happen or very very very very very slow...)
thanks
ps 1 : install first rom of htc original one...always same pb...please help need to connect it !
Click to expand...
Click to collapse
For future reference:
I had the same prob with energy photon/WMDC/Windows 7
Untick "ask me 1st about usb conection type" in USB to PC, then soft reset
Prroblem solved!
when i try to upgrade my xda!! with the usb data cable it sometimes sync with system & sometimes not. after sync when i try to upgrade it shows error 101 is there any real heroes who solve this problom !?!?
datacable is ok !
i've v1.3 xda!! it shows usb when connected with pc but not upgrading !!!!!!!
really funny for htc makers ...
it is essential to put power cradle with datacable when upgrading rom !?
where are the rom developers !?!?
hay bro give me some software or tricks which made activesync connection unbrakable coz xda!! ends partnership with pc.
it shows USB when connected with pc but can't runs the upgrade process.
bootloader screen shows USB
v1.03 without lightning screen but not upgrading !!!!
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
hay bro i try all that stuffs & guides but cannot get any ideas is there any tricks to make xda2 connected with system without brake it ???
can anyone gives me their sd card headers !?!?!?!?!?
it's possible afterwards putting it on sd card and then create .nbf files.
hay brothers plz help fast yaar before put it to garbage or throwing the device ha ha ha lol :*:*
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
maxoutputuk said:
hi have you downloaded latest activsinc i sometimes need to re down cause it plays up so reinstall it usualy do the trick another thing my device stays dark when i up it
Click to expand...
Click to collapse
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
flyboyovyick said:
error 101? Thats connection error i think.
Just one thing. Have a look at the n00b guide to upgrading by ather.
SEARCH: himalaya n00b guide
That give details about upgrading on Windows XP Or Vista
flyboy
Click to expand...
Click to collapse
hay bro,
what's up ???
actually i need sd card headers from himalaya, if u've that then send it to me.
Help with upgrading from windows mobile 2003 to 6.5
I have an O2 XDA II with windows mobile 2003 on it.
When in Bootloader Mode it says v1.01
when connected to the PC it says USB so i know its working in its own little way
I am trying to upgrade it to windows mobile 6.5.
I have tried everything so far and searched forums and tried things suggested on them but i just cant seem to do it.
Can someone send me a guide on how to do it please.
id be very greatful.
Thanks in advance.
kaashp: Doesn't your himalaya read sd cards then?
mikeymcmk: iam willing to give you a guide, have you got msn?
i will guide you through it as your doing it.
It reads SD cards but i didnt manage to do it that way either.
I got an error message saying copy to SD card failed.
my MSN is [email protected]
if you email me at [email protected] and let me know when your online and what i need to download, il log onto MSN.
cheers mate, very appreciated.
(i receive my emails on the above email address near enough instantly)
KAASHP said:
nope bro,
the problom is not regarding active sync or system i think it gone out from its age lol..
actually it needs sd card headers from another himalaya... so if u've sd card header then send me...
regards.
Click to expand...
Click to collapse
Okay, from begining
Answer in points like I ask you questions
1. Can you enter bootloader? (serial text on screen without backlight)
2. Which Bootloader version do you have? It is written on screen when in bootloader mode at bottom (like 1.03v)
3. If you put your device into crandle (of course crandle is connected to usb in your pc/laptop) do USB text appear in place where Serial text was already?
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
5. Do you have nk.nbf and Upgrade.exe or HimaUpdate(...).exe in THE SAME folder?
6. What happens if you run update application and click Next?
7. Did you tried to run in administrate mode?
8. Do you have x64 system?
9. Do you have himalaya? put out your battery and check if it is written PH10B or PH10A.
10. Did you tried another PC or another crandle?
11. Which rom you want to flash?
Answer here.
HI,
1. yes
2. v1.01
3. yes USB is displayed
4. windows 7. ( i have XP aswel which i tried and failed also)
5. Yes. Both files in same folder on my desktop.
6. it says checking information on your PDA then says connection failed.
I tried it when not in bootloader mode aswell and it said it was erasing everything off my PDA but then said connection failed straight away.
7. Yes tried it in admin mode but same error messages.
8. no not using x64 system.
9. under the battery it says PH10B
10. Yes, tried my laptop and also my desktop.same errors on both of them.
11. Ive tried a few ROMs. any ROM will do realy. just want to get rid of windows mobile 2003.
Thanks for your quick replies.
ive updated alot of phones from windows 2003 to windows 6.5 but this 1 is just stubbon lol.
could it be the handset is faulty?
im waiting for another handset to come which is identical but originaly on T-Mobile not O2 like this 1.
sorry for not getting back to you im only a noob 2 things may be wrong sounds like faulty socket on phone or faulty cable/cradle try wobbling the cable gently when connected all sounds obvious but we are talking grandad of mobiles you cannot as far as i know go strait from 2003 to 6.5 i just got to 6.5 if you get a stable connection you have to go 2003se then 5 from there went to swampys blue silk now aeroflylubys hybred 6.5 all running perfect also athers memory program came in handy i used microsoft activsync 4.5 for xp win7 is a brill os but xp did it for me
aeroflyluby said:
4. Which system do you use? (Xp, vista, 7, linux, unix, amiga, commodore)
Click to expand...
Click to collapse
ROFL! amiga!!! AMIGA FOREVER!!!!
Ive just had another O2 XDA II and a TMobile MDA II throught the post.
ive just ordered a new cradle today aswell, as the 1 I was using was slightly cracked on the bit that connects to the phone.
So that might of been the problem.
im unable to test until the new cradle comes (hopefully in the morning)
il keep you posted.
cheers
Hey! Mikey! Join our irc channel:
Server: irc.afterx.net
Channel: #himalaya
Or anyone can join who has anything to discuss about the htc himalaya.