Hi there,
I have my new HTC Touch (upgraded version with 256MB Rom, 128 MB Ram) and found that when WIFI is connected but it is in BT icon shown.
anyone knows how to resolve it?
Related
is it technically possible or not ?
in one news with HTC Auhority he said that they only one placed inside a Camera or Wi-Fi and they prefered Cam .
I think two versions could be,
one is integrated Wi-Fi (for wireless funs )
and the other integrated Camera (for lfuns)
both possible was great but if not possible HTC will decide to product Wi-Fi version mini / Jam / Magician / Qtek
What do you think about it?
you think SDIO WLAN CARD enough ?
I am hoping that there will be a Wifi-MiniSD. Just a little more time, this technology will be available.
this one looks like the next mini/jam/magician / what ever the little thing has
http://forum.xda-developers.com/viewtopic.php?t=26378&highlight=htc+wizard
the HTC wizard aka qtek S9100 is about as large and thick and in my opinion should be concidered as it's replacement
it has BT and WIFI and runs WM2005
y magician cannot upgrade to wm5?
not enought rom....
O2 MINI:
Processor
• Intel PXA 272 CPU
• Clock speed: 416MHz
Memory
• Flash ROM: 64MB
• RAM: 64MB
--------------------------------------------------------------------
c the home page
LINK
PDA France dug up some details about the HTC Galaxy, a new GPS-enabled Pocket PC from HTC (their first, in fact) that looks to be about the same size as the HTC Magician and that runs Windows Mobile 5.0 and has a 300MHz processor, 64MB of Flash ROM, 32MB of RAM, a 2.8-inch, 320 x 240 pixel LCD screen, Bluetooth, WiFi, and an SDIO expansion card slot. Odd to see HTC pumping out something which isn’t also a cellphone, but they’ve probably figured out from their Taiwanese brothers-in-ODM that there’s actually some decent money in dedicated GPS handhelds. Won’t be out until around the end of year.
Again, for the 100000st time: It might be possible to load WM5 onto the Magician, but this can be done ONLY by HTC and MS. And they won't do it EVER!! Why? Have a look:
http://www.theunwired.net/?itemid=2723
Cheers,
Mundl
Can anyone point me to a method of pairing an Orbit (with Official O2 WM6 Upgrade) with a Mercedes Benz Bluetooth (SAP) car kit. Please? I have tried copying the BT SAP Test cab and run it successfully which appears to give rSAP (Sim Settings) but I cannot pair the device.
I can find the device, I can dial the long pairing code but I get no request to enter it on the Orbit. The car kit seems to then time out.
(I have had the same problem with a Graphite, a qtek9100... etc.)
Best answer might be to dump the car kit but I live in hope!
now this is the right place
Thanks!
Now that I have the correct thread - I don't suppose you have an answer
is there no place to set the SAP to authorised? in settings. I have installed A new rom
the Artimis touch rom and it has the SimSAP options in it
The problem is,
the old bt "mouse" of the MB cars was incompatible with the HTC telephones. We tried with several models and software revision but to no avail (Hermes, Wizard, Prophet and Artemis, WM5 and WM6).
The new "mouse" (now smaller and less looking like a telephone) works now w/o problems. This seems to be a MB bug and no HTC bug...
I hope I helped you
Segitz said:
The problem is,
the old bt "mouse" of the MB cars was incompatible with the HTC telephones. We tried with several models and software revision but to no avail (Hermes, Wizard, Prophet and Artemis, WM5 and WM6).
The new "mouse" (now smaller and less looking like a telephone) works now w/o problems. This seems to be a MB bug and no HTC bug...
I hope I helped you
Click to expand...
Click to collapse
Which MB BT model/mouse are you talking about? The SAP or HFP one?
I have an unlocked 16-key HTC Touch Dual plus a Mercedes 2007 S Class with a Bluetooth SAP profile puck in. They do not want to talk to eachother.
The Bluetooth SAP puck pairs fine with my Nokia 8800 and works wonderfully (except I don't want to use the 8800). On the HTC it discovers the phone, then displays a number I should enter. What is meant to happen is (on the rather odd mercedes UI) I then select call. With the 8800 this then brings up a bluetooth incoming pairing request on the phone, I enter the passcode, and it all works. With the HTC, the Mercedes immediately wipes the number of the screen and says "bad number".
I have got SAP Proile on (i.e. turned Remote SIM Access on within SAP settings), and obviously have the device's bluetooth both on and discoverable (or it wouldn't have been able to ascertain the Device ID). Any ideas?
Has anyone paired any WM6 device with the Mercedes Bluetooth SAP unit? (same unit in lots of cars, I'm using the European model which is apparently different from the US model).
My phone reports WM 6 Professional
CE OS 5.2.1622 (Build 18128.0.4.4)
ROM version: 1.31.405.09
ROM date: 10/31/07
Radio version: 1.58.16.27
Protocol version: 25.61.30.03H
Any ideas?
any luck?
hi, i was wondering if you had any luck connecting to mercedes sap bluetooth set, i have atom exec and trying to connect with no success.
i have applied the recommendation in this link
http://forum.xda-developers.com/showthread.php?t=282544&highlight=rsap
the number shows as you said, and does not disappear, but nothing shows on phone screen, (no request of the number)
i was wondering if any one can help
thank you
We need help !!
fawzis said:
hi, i was wondering if you had any luck connecting to mercedes sap bluetooth set, i have atom exec and trying to connect with no success.
i have applied the recommendation in this link
http://forum.xda-developers.com/showthread.php?t=282544&highlight=rsap
the number shows as you said, and does not disappear, but nothing shows on phone screen, (no request of the number)
i was wondering if any one can help
thank you
Click to expand...
Click to collapse
Hi, Any luck at all??.
I'm having the very same issue with a brand new ML and a Touch Pro.
I'm very surprise to see many people struggling with this and still no luck even from this talented group.
Thanks
bluetooth Touch Diamond 2 and Mercedes
I have exactly the same problem: HTC Diamond Touch 2 and Mercedes Benz bluetooth.
In fact the notice of MB gives a PIN of 5 digits and the HTC accepts only 4 digits!!!!
Any idea of what to do?
chrisgar2509 said:
I have exactly the same problem: HTC Diamond Touch 2 and Mercedes Benz bluetooth.
In fact the notice of MB gives a PIN of 5 digits and the HTC accepts only 4 digits!!!!
Any idea of what to do?
Click to expand...
Click to collapse
Which bluetooth device are you using : the COMAND built in one or the add-on SAP device connected to the internal BUS?
I had no problem connecting up to the first one, inlcuding outlook contact download but still struggling with the SAP device.
Weird!!
For info my ML is the latest one meaning the COMAND unit is the latest.
Hi all
I bought HTC touch P3452 last week.. but surprisingly, in 'Active synch' and bluetooth device name, ii show name "HTC_P3450".
Also in Resco Explorer->system properties, it shows device ID - ELF010050, but "htc touch enhanced p3452" is called ELFIN.
So i am doubtful if i have been handed P3450 instead of P3452.
Please help
See in system information if the RAM of device is 128 or 64 mb, if it is 64 then it is elf and if 128 MB then it is elfin.
Elfins are identified as ELF0100 etc, generally as Elfs. If it has got 128 MB RAM, it's Elfin.
HI all,
My device info shows,
RAM=128
ROM=256
So i hope its P3452 only
YEah i have same..............on active sync my touch detect as P3450 but when using tools in this forum( forget what ) my device detect as Elfin
Cherrrsss
Elfin
Its okay. You've an Elfin.