So, whenever I get an mms message from anyone, it shows weird characters in the name field, and will never download the message. When I try and send a message, it says " your message of *whatever*K exceeds the limit of 1k.
Does everyone have this problem?
I switched from my Treo 700wx to the 6800 and really like it, cept this little issue has me scratching my head. Gotta be something obvious, but Im not getting it...
i had the same problem and had to do a hard reset
goonygugle said:
i had the same problem and had to do a hard reset
Click to expand...
Click to collapse
Ugh, great. Anyone else?
So, I did a hard reset, tested before and after restoring my data, and still had the same problem. Guess Ill be trading it for a new one...
I got this too actually and I was wondering if this happened to anyone else as well. Have you installed any .cab files? When I first got the phone it worked fine, then I installed Touchflo, the cube, HTC Home, and the Audio Manager. Some time after that I had that MMS issue.
I did a master reset which seemed to fix it, and I've just reinstalled everything except for the cube. Also, did you do the registry hack to disable the sent message notification? I did that the first time as well as the second time, I'm on my 3rd clean attempt and I haven't done that hack yet.
I hope someone has an answer for this.
I actually had the same problem and finally narrowed it down (through a series of hard resets and individual .cab installs) to the HTC audio manager i had installed. I noticed today in the forums there was a new version (Although supposedly unchanged) and it works fine, i've been relaxing to Chevelle while sending pictures. Found it toward the end of the HTC Original Cab Files thread.
Related
Hi all,
I am aware about all the other threads but yet could not get across some nonsense on my MDA Pro.
I went back to the t-Mobile ROM because of german support on many features but running ozVGA now successfully with two exceptions:
1. Each time I reset the device, I have to reinstall vjbigphone (0.91) and re-run the .exe to get my dialer back to full screen. VJ did a real got job, but I hope anyone coud tell me, what could be wrong?
2. Does anyone know, how to get rid of the stupid and ugly video-button in the t-mobile dialer? I replaced all BMPs with the one's from iMate, but yet video is the stupid grey. flat button.
Once this is solved, I will write down exactly how to get really the tiny machine running with the best tools for best results.
Greetings
ndee
ndee: why do you have to re-install the app?
After a soft reset, what happens when you choose the "load and fix" option from the tray?
I am hoping to spend some time on this app over the next few days. Many apps being fixed, one a at time...
V
Hi Vijay,
when I softreset, everything on the phone is back to the tiny layout. Even though I "load and fix".
Only workaraound I figured out is reinstall :-(
ndee
Strange - I know we spoke about this before, but then, after you re-install it works?
Have you tried not loading VJBigPhone, soft reset, load the phone (eg press green key, so you can see Tiny buttons) and then load VJBigPhone. Does that make any difference? Re-installing shouldn't make any difference, it doesn't load any settings etc from the registry etc...
v
I have some similiar problems. I'm using also the neweset german ROM on my MDA Pro and after a soft reset I don't have to reinstall the app, but I have to close it and restart it again to gain access to the phone application. Without close VJBigPhone nothing happens, after starting the application again everything works fine (till the next soft reset, which happens every morning after the daily backup)
Wolfgang
I have an idea what might be the problem then.
The code was modified a while back to try to find the "phone" program without you having to specify the name in your own language (eg "telefon" instead of "phone"). However, it's possible that if the phone isn't found, it's getting confused. I'll try to look at the code again soon.
I'm not writing any new programs for a while while I do updates to all the old stuff
V
out of sudden, I dont need to reinstall anymore. Just after reset, I run vjbigphoneres and phone comes up full screen. Dont know what I did and how long it will last - keep you informed though - thx so far.
Any solution for the ugly video button of TM insight?
ndee
TM Button: I know you've spoken about it for a while, but I've got no experience of it, I don't really use my Universal I think someone (you?) posted one before, but could you send me a screenshot if you've got appropriate software, and if you have them, a zip of your extended rom?
V
Does anyone know how to fix this? Or what's caused this?
Really don't want to have to hard reset and reinstall apps one by one!
Referring to the "Call Hi..." bit on the bottom left. It's overlaying the video call toggle.
Cheers.
got the same problem, appeared after installing the hotfixes just 5 minutes ago.
I got that too after the hotfix install. I uninstalled the hotfixes but it still shows there.
Now if I try to install again it says "please use the correct version to install this hotfix"
I guess it didnt actually uninstall it
Installed that hotfix as well & can't reinstall it after uninstall.
Just looking through the hotfix exe's to see what its changed.
same here now i have to do hard reset?
Have the same problem.
I restored to an earlier backup.
Because even after UnInstalling the hot fix the text remains.
No probleme on french rom whit this hotfix .
Same as everyone else. Just noticed it when I went to make a phone call.
\Windows\Incall_02_B.bmp
\Windows\phcanhtc.dll
\Windows\rilphone.dll
\Windows\HTCLTB.png
\Windows\18c460d8_manila
These are the files from the two hotfixes.
If you:
1. Uninstall both hotfixes
2. Do a full backup with SPB backup or similar.
3. Do a hard reset.
4. Restore the backup but customise it so as to not restore the above five files.
It should go back to normal. Worked for me anyway.
jcinfo said:
No probleme on french rom whit this hotfix .
Click to expand...
Click to collapse
Also no problem with German Rom and hotfix
Did UK users install UK version?
Can I check if the UK users experiencing problems downloaded the SLIDER fix from the HTC UK website or from the post in the forum which pointed to the HTC German website.
Please could you all respond.
Hello,
I am a UK user with ROM 1.14. Downloaded from the UK site from the European server. I have the "Call Hi" problem, but to be honest, I use the call history more than video calling, so apart from the icon looking bad, its done me a favor. If it was possible to make just that button look better, I would be very happy with its functionality. Video calling is still accessible from the menu.
same problem here.
the hot fixes are system fixes, when you uninstall, you are only removing the entries from the "remove programs" list, but the changes are not reversed. that's why it is not fixing the problem.
my only question is: which of the hot fixes caused this? I installed all three, and I know it's not the system freeze fix, because i installed that long time ago.
Phone Slider Fix
Juggler258 said:
Hello,
I am a UK user with ROM 1.14. Downloaded from the UK site from the European server. I have the "Call Hi" problem, but to be honest, I use the call history more than video calling, so apart from the icon looking bad, its done me a favor. If it was possible to make just that button look better, I would be very happy with its functionality. Video calling is still accessible from the menu.
Click to expand...
Click to collapse
Hi Guys
I agree with Juggler258, it looks ugly but for me this is better functionality as well as I do not use video call! Peverse or what!!
OK - tried this a few times and unsure whether the slider is any better.
KaidM
buggybug0 said:
my only question is: which of the hot fixes caused this? I installed all three, and I know it's not the system freeze fix, because i installed that long time ago.
Click to expand...
Click to collapse
The slider hotfix.
i made a new thread about this problem, sorry about that.
It is annoying cause i want to make Video calls but now i can't because of this stupid hotfix.
Howcome HTC didn't saw this. I mean it's not some hidden bug - it's on the main screen come on.
@OFFTOPIC
The other day I sent their support an email about Flash and futer touchflo development. The answer was so lame I still don't have any clue.
It's not their job about flash,... they don't know at least not in the helpdesk blablabla.
Nokia offered me cool firmware updates and improvements - I hope HTC works that way too. Not just hotfixes.
Apparently HTC fixed this issue with the hotfix and video call problem. See this post.
EDIT: I just tried it and it works fine. Link to this HTC hotfix here.
I've read that others are able to run Pandora. Well, I can't run it on my tp2 (the cab file was the PandoraVga+Ivan1 that's circulating here in xda). I keep getting a C++ debug error. I've removed and reinstalled the app, ran memmaid to clean out bad files/registry, but that didn't work. So I installed the same cab to my husband's tp2 and it ran without any problems and no error messages.
Can anyone help? I'm very close to doing a hard reset.
Thank you for your input,
Theresa
Pandora works now!!!
So the C++ error must be because of conflicts from other previous software installs. I did a backup restore to a few weeks back and reinstalled pandora. Works like a charm!
I attached the cab that works on the tp2.
Good to know my TP2 gets here this week and I've been eagerly awaiting using Pandora on the go. Thanks!
i actually just installed the SP version of Pandora and it seems to work jsut fine the only problem is that the keys are hard to press because they are too small
Song stops before end?
I just installed this on my TP2 with Sprint stock rom.
Works mostly, but the song stops before the end and then says connecting and starts a new song.
Anyone know how to fix this?
Thanks!
Found my own answer!!
Do this for fully working pandora!!
http://fluffyphones.com/how-to-wind...-htc-touch-protouch-diamond-plays-full-songs/
My bad! It does not play full songs still!
Anyone know how to fix this issue???
probably have to do the advanced config 3.3 fix where you set the network packet size at 98xxx. Can't remember the value. The question presented was whether or not this would slow down the TP2's internet speeds. Give it a shot and report back!
afripino said:
probably have to do the advanced config 3.3 fix where you set the network packet size at 98xxx. Can't remember the value. The question presented was whether or not this would slow down the TP2's internet speeds. Give it a shot and report back!
Click to expand...
Click to collapse
I have not noticed a difference. All seems well
Does anyone think Pandora will release an official application on their website for us to use?
Pandora debug C++ fix
tbito said:
I've read that others are able to run Pandora. Well, I can't run it on my tp2 (the cab file was the PandoraVga+Ivan1 that's circulating here in xda). I keep getting a C++ debug error. I've removed and reinstalled the app, ran memmaid to clean out bad files/registry, but that didn't work. So I installed the same cab to my husband's tp2 and it ran without any problems and no error messages.
Can anyone help? I'm very close to doing a hard reset.
Thank you for your input,
Theresa
Click to expand...
Click to collapse
Pandora debug error fix. Took me awhile to find it but there is a topic here at xda
http://forum.xda-developers.com/showpost.php?p=4629192&postcount=83
Here is the credit
Well Pandora works on T-Mobile's network with the TP2, at least.
I've been trying to make the text for the menus bigger, but hadn't had any luck yet.
Installed, but where is it?
I've installed both cabs. However where is the shortcut or the program entry point?
Thanks!
jrgolfpro said:
Does anyone think Pandora will release an official application on their website for us to use?
Click to expand...
Click to collapse
Sadly no as WinMo is now dead thanks to WP7...
for this reason i switched over to slacker for my phone. there is a cab file, the buttons are big enough to press and the sound quality is way better than the hacked pandora one
The text icon on the touchflo bar is stuck with a 1 in it. No, there isn't a new message. A soft reset doesn't fix it. Anyone run across this before?
Just ran across this problem myself this weekend, and it was making me crazy! I found the solution over at ppcgeeks. Just need to run .exe file located here: http://journal.drfaulken.com/fixunre...ation-big-fix/ - and then soft reset. Worked like a charm. They said it may reset the Verizon sent SMS notification, so I just reran that cab as well.
Hope that helps...
arl16 said:
Just ran across this problem myself this weekend, and it was making me crazy! I found the solution over at ppcgeeks. Just need to run .exe file located here: http://journal.drfaulken.com/fixunre...ation-big-fix/ - and then soft reset. Worked like a charm. They said it may reset the Verizon sent SMS notification, so I just reran that cab as well.
Hope that helps...
Click to expand...
Click to collapse
That link didn't work but it helped me find what I was looking for, thanks!
I did run the fixunreadcount and it said it fixed it from 1 to 0 and did a soft reset but it still shows with a 1, I also checked the reg keys for message count and they all do in fact say 0. So then after checking the reg keys usinf CERegEditor from my PC it fixed itself even thoguh I didn't change a value, it was already at 0. Bizarre. But at least it is working now.
Anyone else run into this with their Imagio check:
http://forum.ppcgeeks.com/showthread.php?t=18132
I ran into this as well yesterday, strange our Imagios all did it at once. I did all sorts of stuff and finally the fixunreadcount and a soft reset. Still didn't work, but I read somewhere about ending the Inbox running program for it to actually "look" again at the database. MIne just solved itself about 5 minutes after fixunread and a soft reset
this happened to me. i found out that through some fluke a message sent notification, the one that appears when you re-send a text, was stuck in my inbox but i could get to it.
I got a problem with my mms. When I send, or receive, the mms ends up at only a few kb. Is it some settings or something that needs to be changed? Weird thing is that its like 46 kb when I send the picture, but when its received, its only 6kb.
Sending between 2 HTC Leo.
Got to mention that sending between HTC Leo and Samsung Omnia HD worked great.
Ive tried changing reolution to 1280x1024 in mms properties.
EDIT: I use the 1.66 stock rom norwegian.
Already asked already answered here
http://forum.xda-developers.com/showthread.php?t=629061
I recommend CeRegistryEditor for making registry changes through the PC, allows copy and pasting.
Thanks m8. Couldnt find it by searching. Will try that =)
EDIT: Tried it. I dont think thats the problem. Mine says HTC HD2 T8585 already.
Hmm, are both settings correct?
UAProfile=http://www.htcmms.com.tw/gen/HTC_HD2_T8585-1.0.xml
and
UserAgent=HTC_HD2_T8585
Yes, they are. Ill check the other HTC Leo as well, just in case one of them got this problem.
Also, worth a look in the registry here
HK Local Machine\Software\Jataayu\MMS\
and in the profile key there is a reference to defaultsendsize - currently set to 300 in mine. a little googling brings up chefs here on xda changing that to 1024. Could be worth a play.
Tried that as well =)
Heh well in that case the last thing i can think of is
messaging tab - all messages - menu - settings - options - scroll right to the bottom - photo resolution. Though i suspect that will be already set to 'original'.
Could be the network provider is reducing it themselves? Is that possible or legal?
Tried that as well. Im gonna check the other phone. Check if theres something wrong with the registry input there. I dont have that phone here right now, and my gf isnt answering my calls =P
AyeGee said:
Tried that as well. Im gonna check the other phone. Check if theres something wrong with the registry input there. I dont have that phone here right now, and my gf isnt answering my calls =P
Click to expand...
Click to collapse
Mate - would you post back and let us know how you get on? I've got the exact same problem and would like it sorted.
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=629061
I use Resco Explorer (http://www.resco.net/downloads/pocketpc/explorer/en/rescoexploreren_aio.arm.cab) Registry editor to edit registry.
I dont have anything new before friday when I come home. Its my gfs phone, and she wanted me to fix it. Ill update the thread when I know more. If she doesnt have the bug either, then I dont know whats the problem.
Checked my gfs phone now. She got the right settings as well...
Any others thoughts why the pics are 6 kb? =P
Hey. I've been playing with this problem tonight, (just for kicks, it works fine for me)
Anyway, i came across these two keys
HKEY_LOCAL_MACHINE\Software\Jataayu\MMS\USER
IncomingMessageSize
and
OutgoingMessageSize
both set to 307200 (300kb)
I tried changing them, thinking maybe yours were wrong, but they reset themselves to 300kb. So did a search on '307200' and found another set of mms registry keys you might want to have a look at on your devices.
HKEY_LOCAL_MACHINE\Software\ArcSoft\ArcSoft MMS UA\Config\mm1\MMSCSetting\SampleMMSC
Now i know it says 'sample' in the keys, but it has all the settings for my o2 mms server in there, gateway ports and the like, along with various sending size limits and such.
Gotta be worth a look, eh?
I don't know if you fixed it but i had the same problem and i did this
HKEY_LOCAL_MACHINE\Software\Jataayu\MMS\USER
increase both your incoming message size and outgoing message size
that should do it
i just searched for 300 and looked around