Related
I have an O2 xda Neo (PM300) running Windows Mobile 5 Pocket PC.
All of a sudden I noticed I no longer receive notifications or reminders of appointments or tasks on my "today" page nor any audible sounds. Even though I have:
1. Enabled sounds for reminders in "sounds & Notifications"
2.checked the "display message on screen" and "play sound" boxes in the "notifications" submenu
3.Checked the "set reminders for new items" box in the "appointments" sub menu in "options" in "calendar" (and done the same for "tasks"
My clock is correct. I have soft reset the unit a few times, I have set sample appt's and tasks and attempted to set a reminder for 5 minutes prior just to test and still nothing...
It was working fine upto maybe a couple weeks ago and just stopped working one day. I am at a loss, as the sheduling/task/appoitntment aspect is the main reason for me going the pocket pc route.
Now, I have no advance warning of tasks or appt's other than the calendar displaying the next few or so the day of or day before.
Very frustrating!
Look for Check Notifications ScaryBear Software. This program might be you solution
I had the same problem this week.
In my case it was either the (failed) installation of pocket clock or pocket max phone alarm that did it.
I loaded a previous week's sprite back-up (program part only) and that fixed the problem. I have not tried to reinstall pocket max phone alarm.
Will not reinstall pocket clock because that did not work anyways.
Robin
I sync'd my data, did a hard memory reset, deleted that ActiveSync partnership,created a new partnership, sync'd all my data back onto my handheld and it seems to be working again!
Thanks for your suggestions!
davetribe said:
I sync'd my data, did a hard memory reset, deleted that ActiveSync partnership,created a new partnership, sync'd all my data back onto my handheld and it seems to be working again!
Thanks for your suggestions!
Click to expand...
Click to collapse
I have exactly the same problem - but unfortunately cannot remember when it showed up the first time. I do not want to try a hard reset, also checking pocketmax seems that they only advise to do a lot of reinstallations. And I worry the problem will show up again later as I want to continue using phone alarm. I rather would like to change registry entries.
- Anybody has some idea what to change?
- I found an empty string value WAVEFILE in HKKLM\SOFTWARE\Microsoft\calendar\reminder - can anybody tell me their value here
- same empty value is in HKKLM\SOFTWARE\Microsoft\Tasks\reminder
Thanks Hase01
I had the exact same problem 2 weeks ago on my JAMin - suddenly noticed that I had not been receiving reminders/notifications.
I had not installed any new software, etc., to cause this, I had simply been using the PDA in the same manner as for the preceeding weeks/months.
Hase01, unfortunately the way I fixed it was with a hard reset. Why do you not want to try this? I found that once the reset had been done, it took all of 5-10 minutes to reload all the files and to reinstall the software I had previously been running. It's not that big a deal......
Way2go said:
I had the exact same problem 2 weeks ago on my JAMin - suddenly noticed that I had not been receiving reminders/notifications.
I had not installed any new software, etc., to cause this, I had simply been using the PDA in the same manner as for the preceeding weeks/months.
Hase01, unfortunately the way I fixed it was with a hard reset. Why do you not want to try this? I found that once the reset had been done, it took all of 5-10 minutes to reload all the files and to reinstall the software I had previously been running. It's not that big a deal......
Click to expand...
Click to collapse
I am not a friend of hard resets, that's why I am hesitating. And I am not sure how far I have to go back, as I was in vacation for some time and only afterwards started missing the reminders.
Could you do me a favor and let me know your registry settings for
- HKCU\ControlPanel\Notifications\Reminders
- HKCU\ControlPanel\Notifications\Sounds
- HKCU\ControlPanel\Notifications\Defaults
Do you use phone alarm?
Thanks in advance
hase01 said:
I am not a friend of hard resets, that's why I am hesitating. And I am not sure how far I have to go back, as I was in vacation for some time and only afterwards started missing the reminders.
Could you do me a favor and let me know your registry settings for
- HKCU\ControlPanel\Notifications\Reminders
- HKCU\ControlPanel\Notifications\Sounds
- HKCU\ControlPanel\Notifications\Defaults
Do you use phone alarm?
Thanks in advance
Click to expand...
Click to collapse
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
perlmane said:
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
Click to expand...
Click to collapse
Just download my Free Task Manager found here:
http://forum.xda-developers.com/showthread.php?t=280104
1) Launch it on your pocket pc
2) Select Notifications tab
3) First try to remove duplicates
4) Try to remove SCRIPT:0x000...
If it still doesn't work, select all of them and disable them.
Do a soft reset and create a new notification, if it works, I suggest you to enable only the necessary notifications, so those like:
CALENDAR.EXE
\Windows\calupd.exe
replog.exe
calnot.exe
clocknot.exe
and delete all [none] notifications
Cheers,
.Fred
perlmane said:
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
Click to expand...
Click to collapse
I have solved it using alarmtoday, see my post:
http://forum.xda-developers.com/showthread.php?p=1047699#post1047699
No more problems since 3 months (knock on wood)
Regards Hase
hase01 said:
I have solved it using alarmtoday, see my post:
http://forum.xda-developers.com/showthread.php?p=1047699#post1047699
No more problems since 3 months (knock on wood)
Regards Hase
Click to expand...
Click to collapse
Glad to hear that... Anyway, this is another solution that works.
One of my colleagues had the same problem, about 570 notifications. We tried first to remove duplicates and SCRIP:0x000 events, but the problem remained.
After the remove he still had more than 400 notifications. So I selected them all and disabled them via TM. After soft reset we created a test notification and it worked. So as I mentioned in my previous post, we enabled back the needed notifications and we removed the rest. Now everything is fine.
I have noticed that most of the time, this problem appears when you synchronize your calendar with multiple pc's.
dotfred said:
Glad to hear that... Anyway, this is another solution that works.
One of my colleagues had the same problem, about 570 notifications. We tried first to remove duplicates and SCRIP:0x000 events, but the problem remained.
After the remove he still had more than 400 notifications. So I selected them all and disabled them via TM. After soft reset we created a test notification and it worked. So as I mentioned in my previous post, we enabled back the needed notifications and we removed the rest. Now everything is fine.
I have noticed that most of the time, this problem appears when you synchronize your calendar with multiple pc's.
Click to expand...
Click to collapse
The smart thing with the alarmtoday solution was that I did not need to take care about notifications, deletions etc. I just installed AT and all notifications came back. And btw, I usually sync only with one PC, seem to be a WM5 problem.
hase01 said:
The smart thing with the alarmtoday solution was that I did not need to take care about notifications, deletions etc. I just installed AT and all notifications came back. And btw, I usually sync only with one PC, seem to be a WM5 problem.
Click to expand...
Click to collapse
Dotfred, could you help me.
I was not lucky - while replying to this post the problem came back again after 3 months. My Alarm today fix did not work again. Before I tried your task manager I checked my notification queue with sk-Tools: I don't have too many notifications. So - any Idea what I can do instead.
Thanks Hase
hase01 said:
Dotfred, could you help me.
I was not lucky - while replying to this post the problem came back again after 3 months. My Alarm today fix did not work again. Before I tried your task manager I checked my notification queue with sk-Tools: I don't have too many notifications. So - any Idea what I can do instead.
Thanks Hase
Click to expand...
Click to collapse
I was almost in my bed!
1) Try to disable all notifications (don't worry, they are stored in the registry, so you won't lose any of them, except if you do a hard reset, or delete the reg entries).
2) Soft reset and make a test
3) if it works, just enable the notifications as mentioned in my first post until the problem is back (or not).
Cheers,
.Fred
ps.: I'm going to sleep now... it's 1:24 AM here!
dotfred said:
I was almost in my bed!
1) Try to disable all notifications (don't worry, they are stored in the registry, so you won't lose any of them, except if you do a hard reset, or delete the reg entries).
2) Soft reset and make a test
3) if it works, just enable the notifications as mentioned in my first post until the problem is back (or not).
Cheers,
.Fred
ps.: I'm going to sleep now... it's 1:24 AM here!
Click to expand...
Click to collapse
Thanks for late night reply - I am living in the same time zone btw
May be I have to install your task manager, sk-tools is not able to disable notifications, only delete is possible. Do you think this might help, I won't be able to install you tm before the weekend? I don't have duplicate entries and no SCRIPT:0x000.. entries.
Hase
hase01 said:
Thanks for late night reply - I am living in the same time zone btw
May be I have to install your task manager, sk-tools is not able to disable notifications, only delete is possible. Do you think this might help, I won't be able to install you tm before the weekend? I don't have duplicate entries and no SCRIPT:0x000.. entries.
Hase
Click to expand...
Click to collapse
By disabling all entries, it's like cleaning the notifications database. So it will surely solve your problem (temporary anyway).
Cheers,
.Fred
dotfred said:
By disabling all entries, it's like cleaning the notifications database. So it will surely solve your problem (temporary anyway).
Cheers,
.Fred
Click to expand...
Click to collapse
I tried to use you TM on my WM2003 SE ppc as I always do before I run a new program on my Qtek S200 (it's nearly impossible to deinstall a program only manual deletion of all files works). Unfortunately it does not run on my IPAQ. It starts but dies after 0.5 secs. Did you ever had this problem?
Hase
hase01 said:
I tried to use you TM on my WM2003 SE ppc as I always do before I run a new program on my Qtek S200 (it's nearly impossible to deinstall a program only manual deletion of all files works). Unfortunately it does not run on my IPAQ. It starts but dies after 0.5 secs. Did you ever had this problem?
Hase
Click to expand...
Click to collapse
You're not the first one telling me this. I don't know why it doesn't work on IPAQ with WM2003SE.
But, you can launch it on your Qtek s200 without any doubt. I already tested it myself on Qtek 2020, 9090, 9100, Mitac Scoter A701 and HTC P3600 without any problem found.
Cheers,
.Fred
dotfred said:
You're not the first one telling me this. I don't know why it doesn't work on IPAQ with WM2003SE.
But, you can launch it on your Qtek s200 without any doubt. I already tested it myself on Qtek 2020, 9090, 9100, Mitac Scoter A701 and HTC P3600 without any problem found.
Cheers,
.Fred
Click to expand...
Click to collapse
I got the notifications back. I think it was basically repaired by installing alarmtoday again from backup. I think the problem could have been caused by the new sktools version. Strange.
B.t.w. do you need a beta tester for oyur TM on IPAQ. Then just sent me a pm
Hase
Ok. I have the same problem recently.. unsure what is the problem, but it seems that softreset *cause* (not solve) the problem, some what.. during my testing.
Anyway, I tried a few solutions listed, and the easy one is to use the TaskManager (freeware) to find the notification with 'Status' is in 'signalled'. These are passed notifications and it seems that these are causing the problem. As soon as I've removed them, the problem seems to have solved.
Then, I tested it again, by removing the 'Init_tray' from the startup and do a softreset. I tried it again, and it doesn't work. I check again on Task Manager, those 'signalled' stuff are back.
So, whenever I get an mms message from anyone, it shows weird characters in the name field, and will never download the message. When I try and send a message, it says " your message of *whatever*K exceeds the limit of 1k.
Does everyone have this problem?
I switched from my Treo 700wx to the 6800 and really like it, cept this little issue has me scratching my head. Gotta be something obvious, but Im not getting it...
i had the same problem and had to do a hard reset
goonygugle said:
i had the same problem and had to do a hard reset
Click to expand...
Click to collapse
Ugh, great. Anyone else?
So, I did a hard reset, tested before and after restoring my data, and still had the same problem. Guess Ill be trading it for a new one...
I got this too actually and I was wondering if this happened to anyone else as well. Have you installed any .cab files? When I first got the phone it worked fine, then I installed Touchflo, the cube, HTC Home, and the Audio Manager. Some time after that I had that MMS issue.
I did a master reset which seemed to fix it, and I've just reinstalled everything except for the cube. Also, did you do the registry hack to disable the sent message notification? I did that the first time as well as the second time, I'm on my 3rd clean attempt and I haven't done that hack yet.
I hope someone has an answer for this.
I actually had the same problem and finally narrowed it down (through a series of hard resets and individual .cab installs) to the HTC audio manager i had installed. I noticed today in the forums there was a new version (Although supposedly unchanged) and it works fine, i've been relaxing to Chevelle while sending pictures. Found it toward the end of the HTC Original Cab Files thread.
Has anyone removed these from the programme? I would love to keep my X1 as clean as possible, and i am just wondering would anything happen if i remove these programme since i will not be using them at all.
YES, u can no problem.
Yep no problem.
When I did it through remove programs the handango left some file or reg entry behind though, and everytime I started the device it would give a warning.
I used a reg editor to delete a single reference in the registry and a few files in program files I believe and now handango is truly gone
gold333 said:
Yep no problem.
When I did it through remove programs the handango left some file or reg entry behind though, and everytime I started the device it would give a warning.
I used a reg editor to delete a single reference in the registry and a few files in program files I believe and now handango is truly gone
Click to expand...
Click to collapse
ive tried removing that stupid handangoinhand twice and both times after soft reset i get a warning too. had to hard reset twice bcos of this.
what reg editor did u use? so now u dont get that warning anymore?
I did so but everytime I turn on the x1 the nagging screen saying something like this "one of the component of the Handango in hand is missing, try install it again..,"
well, just press ok and it will go away
it may be good to leave the program in the x1
you need to manualy remove it from the start up folder to get rid of the notification of missing file
slash_5150 said:
ive tried removing that stupid handangoinhand twice and both times after soft reset i get a warning too. had to hard reset twice bcos of this.
what reg editor did u use? so now u dont get that warning anymore?
Click to expand...
Click to collapse
there was no need to hard reset. simply delete handango component from-
windows/stratup.
You should not have had to do a hard reset … after uninstalling the handango applications using the add/remove programs control panel, using File Explorer go into /windows/startup items and delete the handango shortcut. What is happening is the shortcut which executes on start up doesn't find the app and registers the error.
Haven't worked out how to delete the Getting Started app yet??
tnx guys. will try that. still fairly new to ppc.
though i would hv figured this out myself if i had this problem on my pc. lol.
hmm, i just removed this program and after soft reset i got no warnings.. Did not remove anything from startup folder either.
Swedish phone, might be the difference?
.. im not saying that this is NOT a good thing
Thanks for the tips guys, got the Handago out in seconds. Still, any idea on how to remove "getting started", msn and all that other junk?
Hey guys,
Right now my Leo is unable to launch HTC sense after I did a soft-reset after modifying the registry "Change - CacheSize to 4096" gotten from the Leo Hints & Tips thread as well as uninstalling Nimbuzz.
Also I also created a shortcut for Task Manager to put into the start menu and added it to the Manilla shortcut at the main page.
A couple of soft-resets still doesn't solve it, and sometimes it will say tap here to start HTC Sense but tapping doesn't do anything. Able to open the dialing menu but takes quite awhile.
Pressing the contacts menu gives the error message "The file "contacts" cannot be opened. Either it is not signed with a trusted cert, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
Any ideas?
Got the same problem.
Duttys HD Holy Grail
I tried to reinstall the rom but I can't connect with usb.
did you try that?
same problem here.
rom is 1.48 from stock.
also had the unable to launch sense error, couldnt find a way to solve it so i had to hard reset (AGAIN!!)
having to link 90 contacts with facebook manually sucks!
Does anyone have been able to solve this problem? I faced it today, I was doing some tweaks to my HD2, did some soft resets but then sudenlly it stops working, Sense freezes and has been unable to launch it, sometimes I can access to start menu but I can't load anthing, every link I tried to open tells me that the file cannot be opened either it's not signed or one of its components cannot be found. Nothing but the phone can be opened.
My rom is 1.48 stock.
Is the only solution for this a hard reset?
vhjc said:
Does anyone have been able to solve this problem? I faced it today, I was doing some tweaks to my HD2, did some soft resets but then sudenlly it stops working, Sense freezes and has been unable to launch it, sometimes I can access to start menu but I can't load anthing, every link I tried to open tells me that the file cannot be opened either it's not signed or one of its components cannot be found. Nothing but the phone can be opened.
My rom is 1.48 stock.
Is the only solution for this a hard reset?
Click to expand...
Click to collapse
I faced similar problem before if I added the tweak of FATFS=4096. I did "hard reset" and then reinstalled all stuffs. I reinstalled all programs and readded the tweaks except FATFS one. The phone resumes normal.
It seems to me that the tweak of FATFS may not work on HD2.
Yes, actually I managed to remove that tweak without hard reset it, reverted it to FATFS=0 and everything came back to normal, my HD2 is now like it was before.
We MUST warn every HD2 owner to not apply this tweak.
I've cautioned this particular tweak on the main thread before.
changing the FATFS would hanged the HD2 (ROM: 1.48 Asia Region) and you'll need to hard reset to revert to the default settings.
Ohhh I didn't see that...
Thanks calyon!
vhjc said:
Yes, actually I managed to remove that tweak without hard reset it, reverted it to FATFS=0 and everything came back to normal, my HD2 is now like it was before.
We MUST warn every HD2 owner to not apply this tweak.
Click to expand...
Click to collapse
HOw you do that?!
First I disabled HTC Sense from Home, then I move to the top of the start menu the registry editor (in my case it's SKTools Registry Explorer), then I turned it off and on several times and every time I tried to run the registry editor, when I was unable to run it I turned it off and on again, until I was able to run the registry editor, then navigated to HKEY_LOCAL_MACHINE\System\StorageManager\FATFS and changed back the FATFS to 0.
I don't know how many times I've had to turn it on and off, but I thinks it's better than do a hard reset, specially if you don't have a backup or your data.
vhjc said:
First I disabled HTC Sense from Home, then I move to the top of the start menu the registry editor (in my case it's SKTools Registry Explorer), then I turned it off and on several times and every time I tried to run the registry editor, when I was unable to run it I turned it off and on again, until I was able to run the registry editor, then navigated to HKEY_LOCAL_MACHINE\System\StorageManager\FATFS and changed back the FATFS to 0.
I don't know how many times I've had to turn it on and off, but I thinks it's better than do a hard reset, specially if you don't have a backup or your data.
Click to expand...
Click to collapse
I confirm... This is working!
(considering you have a reg editor already installed of course)
Thank you very much vhjc... you saved all of us lots of painfull time!
Hello,
I just changed the FATFS registry value to 4096 based on the tweaks hint & tips and now my HD2 hangs and couldn't launch the HTC Sense app. Reading the responses above, it seems that it's possible to disable HTC Sense from Today setting in this kind of condition. However no matter how I tried to click on the "Setting" icon on the Start Menu screen, I only got the error window saying that the program is missing and we need to restore or reinstall... I couldn't connect the device to my laptop thru activesync to remove the registry since the activesync app (the switcher between storage device & activesync window) failed to load as well...
Could you please share how did you manage to go to the Today setting window to disable the HTC Sense? I couldn't see any other options since no other shortcuts are available, nor I can run any app from the start menu Is there a way to load HD2 standard WinMo OS in safe mode only...?
I'm really desperate on this situation and as much as possible I don't wanna hard reset my HD2 since I haven't done any backup yet...
Please help... Thank you very much in advance!
cheers
Im getting the unable to launch htc sense message too, even after a hard reset the problem re-occurs. can anyone advise me what to do??
Sorry, should have mentioned this above, I have not changed the registry setting of fatfs to anything other than 0, so this is not whats causing this problem for me. I have tried using a reg editor ro confirm the setting is 0 still no luck.
before the problem occurs i get an error reporting message saying theres been a problem with manila.exe
Any help pleeeease....
conantroutman said:
Im getting the unable to launch htc sense message too, even after a hard reset the problem re-occurs. can anyone advise me what to do??
Click to expand...
Click to collapse
I have just encourntered the very same problem with HTC Sense - and I have not changed anything on my phone for days, if not weeks...
Anyone????
I have just encourntered the very same problem with HTC Sense - and I have not changed anything on my phone for days, if not weeks...
Click to expand...
Click to collapse
Me too. I wasn't even using the phone when I got an error reporting message about manilla. Several soft and 1 hard reset but sense still cannot load.
4braid said:
Me too. I wasn't even using the phone when I got an error reporting message about sense. Several soft and 1 hard reset but sense still cannot load.
Click to expand...
Click to collapse
Literally just in the last hour or so?
Something very odd is going on here...
The same happened to mine 2 hours ago. Didnt make any changes to the device or installed any software etc Tried soft resets but no joy
Im considering a hard reset unless someone has a fix please
Mine has done exactly the same thing!! was working fine earlier on the way home from work, went to check it about 6pm and it had locked saying a problem with Manilla.exe had occurred... couldn't get it to do anything so took out the battery and ever since HTC sense wont load..
Everything seems fine, al programs work, phone is ok etc just sense wont load, was just about to do a hard reset after backing up data and removing card when i read this post so stopped...
Has anyone else had this?....
Hello...
I have installed BSBTweaks 1.6 on my HD2, works great...
but then i recently tried adding apps to the rotated apps, and when it soft resets, the list isnt saved. I have read that this problem existed but was fixed in version 1.6
anyone else had similar problem, please guide me through, will be a great help...
thanks
PS: i tried adding office apps (word/excel) to the rotated apps list, that is what didnt work, i didnt try any other applications...
everyone...i am tired breaking my head with this for 2 days now...please help...
everything (version wise) looks fine with V 1.6 for bsbtweaks, also have framework 3.5 installed, but dont understand why the rotation isnt working...whenever i add an application to the rotation list, bsb asks for a soft reset and the application is still missing form the list when i recheck it...
please help...
hi, just had a quick google on this subject, and although i couldnt find anything specific i came across lots of posts saying it can sometimes take a short while for the registry changes to take, and if you reset immediately they can be lost, , , the upshot being to wait ten seconds or so before doing the reset (although ive never had any problems, and never heard of this delay before, so i think it very unlikely.)
Another thought that occured was try installing "CERegistry editor", run it, connect your phone, hit connection - connect and once you can see your registry, click 'tools - unlock registry'
Not sure whether its connected, but worth a try, eh?
Plus, if all else fails, you can use cereg editor to export the rotation white list key whilst you have bsb tweaks open and have applied teh rotation tweak, but before you reset, and make a cab from it, see if it works after being applied as a cab.
samsamuel said:
hi, just had a quick google on this subject, and although i couldnt find anything specific i came across lots of posts saying it can sometimes take a short while for the registry changes to take, and if you reset immediately they can be lost, , , the upshot being to wait ten seconds or so before doing the reset (although ive never had any problems, and never heard of this delay before, so i think it very unlikely.)
Another thought that occured was try installing "CERegistry editor", run it, connect your phone, hit connection - connect and once you can see your registry, click 'tools - unlock registry'
Not sure whether its connected, but worth a try, eh?
Plus, if all else fails, you can use cereg editor to export the rotation white list key whilst you have bsb tweaks open and have applied teh rotation tweak, but before you reset, and make a cab from it, see if it works after being applied as a cab.
Click to expand...
Click to collapse
Thanks Sam...
I have tried waiting for a while before doing the soft reset...
I will try to uninstall the BSB Tweaks and reinstall to see if that makes any difference...if not i will have no other option but do the regedit manually...
thanks for the help though ..cheers...!
Solved
Finally able to identify the reason for why BSBTweaks was not letting me add apps to rotate...
I guess the soft reset offered by BSBTweaks was not allowing the registry entries to be saved...so i didnt choose that reset option and instead did a manual reset by the power button...and when the phone started back, it worked...
so just make sure that we should add apps to rotate and do a manual reset instead of BSBTweaks reset...
thanks