I've read that others are able to run Pandora. Well, I can't run it on my tp2 (the cab file was the PandoraVga+Ivan1 that's circulating here in xda). I keep getting a C++ debug error. I've removed and reinstalled the app, ran memmaid to clean out bad files/registry, but that didn't work. So I installed the same cab to my husband's tp2 and it ran without any problems and no error messages.
Can anyone help? I'm very close to doing a hard reset.
Thank you for your input,
Theresa
Pandora works now!!!
So the C++ error must be because of conflicts from other previous software installs. I did a backup restore to a few weeks back and reinstalled pandora. Works like a charm!
I attached the cab that works on the tp2.
Good to know my TP2 gets here this week and I've been eagerly awaiting using Pandora on the go. Thanks!
i actually just installed the SP version of Pandora and it seems to work jsut fine the only problem is that the keys are hard to press because they are too small
Song stops before end?
I just installed this on my TP2 with Sprint stock rom.
Works mostly, but the song stops before the end and then says connecting and starts a new song.
Anyone know how to fix this?
Thanks!
Found my own answer!!
Do this for fully working pandora!!
http://fluffyphones.com/how-to-wind...-htc-touch-protouch-diamond-plays-full-songs/
My bad! It does not play full songs still!
Anyone know how to fix this issue???
probably have to do the advanced config 3.3 fix where you set the network packet size at 98xxx. Can't remember the value. The question presented was whether or not this would slow down the TP2's internet speeds. Give it a shot and report back!
afripino said:
probably have to do the advanced config 3.3 fix where you set the network packet size at 98xxx. Can't remember the value. The question presented was whether or not this would slow down the TP2's internet speeds. Give it a shot and report back!
Click to expand...
Click to collapse
I have not noticed a difference. All seems well
Does anyone think Pandora will release an official application on their website for us to use?
Pandora debug C++ fix
tbito said:
I've read that others are able to run Pandora. Well, I can't run it on my tp2 (the cab file was the PandoraVga+Ivan1 that's circulating here in xda). I keep getting a C++ debug error. I've removed and reinstalled the app, ran memmaid to clean out bad files/registry, but that didn't work. So I installed the same cab to my husband's tp2 and it ran without any problems and no error messages.
Can anyone help? I'm very close to doing a hard reset.
Thank you for your input,
Theresa
Click to expand...
Click to collapse
Pandora debug error fix. Took me awhile to find it but there is a topic here at xda
http://forum.xda-developers.com/showpost.php?p=4629192&postcount=83
Here is the credit
Well Pandora works on T-Mobile's network with the TP2, at least.
I've been trying to make the text for the menus bigger, but hadn't had any luck yet.
Installed, but where is it?
I've installed both cabs. However where is the shortcut or the program entry point?
Thanks!
jrgolfpro said:
Does anyone think Pandora will release an official application on their website for us to use?
Click to expand...
Click to collapse
Sadly no as WinMo is now dead thanks to WP7...
for this reason i switched over to slacker for my phone. there is a cab file, the buttons are big enough to press and the sound quality is way better than the hacked pandora one
Related
** UPDATE 16-JUN-2009 **
Introducing Geocasting with Inca X (Video)
http://www.ix-m.com/
GPS Website
http://www.ix-m.com/gps
Latest CAB is always available here
www.ix-m.com/downloads/livecam.cab
The app is no longer in beta.
This program seems really cool, and I was watching shogunmark's video for a second, but wouldn't this absolutely destroy your battery? Activating a 3G connection already triple's my battery drain, and GPS throws on another 200-300 mA.
Phil Bishop said:
Hi All,
We have a new version of an application, which is now available on beta and would greatly appreciate it if any of you have time to participate in the trial and provide me with feedback on whether the software works or not on your device.
In simple terms the new version of the application allows you to broadcast both an image stream and GPS data which can be viewed either in real-time or later via the Live Media Web application
Here's a quick video introduction to the software
http://www.youtube.com/watch?v=6fpQlqJROrw&rel=0
Device requirements:
Windows Mobile 6, camera and GPS (internal or external via BT)
Windows Mobile 5 + .NET CF v2 (or above) camera and GPS (internal or external via BT)
Download CAB from
http://www.ix-m.com/gps-beta/mobile/livemedia-1.5.1.cab
or visit www.ix-m.com/gps-beta from your mobile
Quick video to show you how to set-up the app on your phone
http://www.youtube.com/watch?v=76lzPUwTyHM&rel=0
Website access from your PC to view your broadcasts and published broadcasts
http://www.ix-m.com/gps-beta
Support and Feedback
Please use the contacts form on the website
http://www.ix-m.com/contact.aspx?type=7
As this is my first posting here, hopefully I've got all the html tags correct and I hope some of you have time to try this out and let me know what you think about the app.
Many thanks
Phil Bishop
Inca X Mobile
Click to expand...
Click to collapse
hey phill this program looks very promising but im trying to try it out but am having difficulties i make it all the way to initializing camera n then it fails on me this is the error msg that comes up maybe u can help me out with this:
A native exception has occurred in
livecam.exe.
Select Quite and then restart this program, or select Details for more information.
ExceptionCode: 0xc0000005
ExceptionAddress: 0x00f115fc
Reading: 0x00000000
Faulting module: ix-cam.dll
Offset: 0x000015fc
at WMCamera.GetCameraResolutions(IntPtr pResolutions, Int32& iResolutionsSize)
at WMCamera.GetAvailableResolutions()
at BroadcasterView.TakePictures()
ne advise ne1 lol ?!?!?
met3ora said:
This program seems really cool, and I was watching shogunmark's video for a second, but wouldn't this absolutely destroy your battery? Activating a 3G connection already triple's my battery drain, and GPS throws on another 200-300 mA.
Click to expand...
Click to collapse
This is really good app and is very promising. I have been testing for phil for a while on this. Yes it can put quite a drain on the battery, however when im driving i have it plugged into the charger so as long as i stay topped off then it does alright.
james105 said:
hey phill this program looks very promising but im trying to try it out but am having difficulties i make it all the way to initializing camera n then it fails on me this is the error msg that comes up maybe u can help me out with this:
A native exception has occurred in
livecam.exe.
Select Quite and then restart this program, or select Details for more information.
ExceptionCode: 0xc0000005
ExceptionAddress: 0x00f115fc
Reading: 0x00000000
Faulting module: ix-cam.dll
Offset: 0x000015fc
at WMCamera.GetCameraResolutions(IntPtr pResolutions, Int32& iResolutionsSize)
at WMCamera.GetAvailableResolutions()
at BroadcasterView.TakePictures()
ne advise ne1 lol ?!?!?
Click to expand...
Click to collapse
i had experienced this before with some of dutty's roms, if the .net isnt cooked into the rom correctly then it throws major errors like that. try re-installing netcf and see if that cures your problems!
*i will note that on some cooked roms re-installing netcf doesnt help because of the way it was cooked in.
shogunmark said:
i had experienced this before with some of dutty's roms, if the .net isnt cooked into the rom correctly then it throws major errors like that. try re-installing netcf and see if that cures your problems!
*i will note that on some cooked roms re-installing netcf doesnt help because of the way it was cooked in.
Click to expand...
Click to collapse
ill give that a shot but i doubt thats the issue cause i did a hard reset n installed it n it worked fine and then i tried using it again later on and got that same error msg again :-(
Mogul on Sprint
I've had a couple of reported problems about running the app on the Sprint Mogul, if anybody has sucessfully (or otherwise) run the app on a Sprint mogul it would be helpful to know if this is generic problem or not.
Many thanks
Phil
I have a mogul and it seems to work flawlessly. I was able to broadcast two separate feeds with gps.
Does this software work with WiFi, and cache the images & GPS coordinates, for upload at a later date?
I dont have an unliminated data plan, and uploading multiple images would require me to take out a loan
Cheers, Mike.
EDIT:
I've just gave this a try with WiFi, and it seems to work well.
GPS shows me moving from my office to my lounge, very freaky, very accurate
Just the question about the cache left.
I guess since it does "broadcasting" then it probably cant (yet?) cache the video and GPS data?
Cheers, Mike.
Mike1002 said:
Does this software work with WiFi, and cache the images & GPS coordinates, for upload at a later date?
I dont have an unliminated data plan, and uploading multiple images would require me to take out a loan
Cheers, Mike.
EDIT:
I've just gave this a try with WiFi, and it seems to work well.
GPS shows me moving from my office to my lounge, very freaky, very accurate
Just the question about the cache left.
I guess since it does "broadcasting" then it probably cant (yet?) cache the video and GPS data?
Cheers, Mike.
Click to expand...
Click to collapse
Since I posted lot's of people have emailed asking for a cache then upload option along with the ability to be able to disable the speed tracking
I've been working these today along with several other feature requests and hope to have a new build available sometime tomorrow with these updates in.
would there be a way to lock the screen while broadcasting?
diterex said:
would there be a way to lock the screen while broadcasting?
Click to expand...
Click to collapse
Lock the screen how? You can always map a button to the phone lock.
Hey phil, any chance you can do an overlay and display speed somewhere on the screen?
I am unable to add AOL buddies. I have tried to add a few buddies, even my own. But every time it says that the name does not exist. Anyone know why???
james105 said:
hey phill this program looks very promising but im trying to try it out but am having difficulties i make it all the way to initializing camera n then it fails on me this is the error msg that comes up maybe u can help me out with this:
A native exception has occurred in
livecam.exe.
Select Quite and then restart this program, or select Details for more information.
ExceptionCode: 0xc0000005
ExceptionAddress: 0x00f115fc
Reading: 0x00000000
Faulting module: ix-cam.dll
Offset: 0x000015fc
at WMCamera.GetCameraResolutions(IntPtr pResolutions, Int32& iResolutionsSize)
at WMCamera.GetAvailableResolutions()
at BroadcasterView.TakePictures()
ne advise ne1 lol ?!?!?
Click to expand...
Click to collapse
I am getting the same error when i try to do a broadcast. I am running "[Apr 16] Dutty's WM6.1 5.2.19209 Release [User Guide & ChangeLog in Post 2] UPDATED" which has 3.5 installed already. I tried re-installing netcf 3.5 and i get an error about memory and closing applications, to restart phone and try to re-install. I tried that and got the same exact error. So i re-flashed with Dutty's rom, as listed above, but tried installing netcf from the get go and got the same exact error. Anyone have any ideas???
Would it also be possible to have an option to enable the flash?
The camera flash light on my device is only half decent, but having it on would be a great option.
WildSioux said:
I am unable to add AOL buddies. I have tried to add a few buddies, even my own. But every time it says that the name does not exist. Anyone know why???
Click to expand...
Click to collapse
Sorry, the software isn't linked in to other IM systems at the moment. Only other Live Media users can access your broadcasts, because they need the Live Media client to be able to see what you are broadcasting.
HTH
Phil
diterex said:
would there be a way to lock the screen while broadcasting?
Click to expand...
Click to collapse
If you mean - stop the screen from going to sleep when broadcasting?
Then yes I am looking into a solution for that for handsets that don't stay alive while the camera is active.
greetings phil. very nice program. its working great on my sprint mogul.
Phil Bishop said:
Sorry, the software isn't linked in to other IM systems at the moment. Only other Live Media users can access your broadcasts, because they need the Live Media client to be able to see what you are broadcasting.
HTH
Phil
Click to expand...
Click to collapse
Hi Phil,
Yeah, shortly after posting that question I messed around with it a little bit and made a test name. Everything is working great now.
Now, anyway of making the feed fullscreen on computer?
Version Update
There is now an updated version available, with some of your feature requests in.
Record Mode
Allows you record your broadcasts with GPS offline and upload them later.
On the Broadcaster's setting screen there is a new item "Live broadcast" - tap/select and the Broadcast menu option changes to Record.
If you have a storage card, then the files are saved to the livemedia folder, otherwise under \\appData\livemedia.
On the website, login and under My Broadcasts is a new link to upload your broadcasts.
Please note this is only applicable for GPS enabled broadcasts.
Disable sending speed data
On the GPS enable/disable screen there is a new menu item called "Include speed" uncheck so speed data is not recorded.
Check for updates
From the main menu this can now be used to check for and download furture version updates.
Download link
http://www.ix-m.com/gps-beta/mobile/livemedia-1.5.2.cab
Anyone have it yet??
I am eagerly waiting for this too. What is Microsoft's deal on this. I thought it was supposed to be originally launched with WinMo 6.5.
I wish your title had a question ? mark at the end of it. Without it, it appears to be more of a statement. got excited for nothing.
http://forum.ppcgeeks.com/showthread.php?t=92493
Here you go
I've not been able to get this running on my Fuze. Probably because I'm not running WM 6.5 though
Aaron McCarthy said:
http://forum.ppcgeeks.com/showthread.php?t=92493
Here you go
I've not been able to get this running on my Fuze. Probably because I'm not running WM 6.5 though
Click to expand...
Click to collapse
Can you post it here? I'm not registered to that forum
pixelwix said:
So I was the sprint store last night checking out the HERO, right next to it was the Samsung Intrepid it had the TellMe app on there so copied the install.exe file on to my tp2 to see if it would install. I can get it to install but the app wount launch. anyone wanna give it ago to see if they can get it working?
*update*
I guess to get it working you need to have netcf 3.5 installed to make it work.
some are saying touch works, some are saying it doesn. I guess its hit or miss.
get netcf 3.5 here --> http://forum.ppcgeeks.com/showpost.php?p=1263153&postcount=9
Click to expand...
Click to collapse
Attached are the files you need.... apparently as I havnt been able to get this working on my Fuze yet.
I cant upload the NETCFv35.wm.armv4i.cab for some reason. Sorry guys
Doesn't seem to work for the Titan.. I'll post this thread over there and see if anyone else can run it.
Sorry for double post
Aaron McCarthy said:
Attached are the files you need.... apparently as I havnt been able to get this working on my Fuze yet.
I cant upload the NETCFv35.wm.armv4i.cab for some reason. Sorry guys
Click to expand...
Click to collapse
Thank you,
btw on i780 (wm6.1 build 21109, netcf3.5 already in rom) it crashes when it reaches 82%
I get to 72% but then it says "There was a problem Starting Tellme. Try again later
Installed and touch works. Recognizes contacts but when texting, I say what I want it to transcribe and it says thinking...then says cannot connect to network. Also if I say pizza or whatever it doesn't recognize anything or open default browser. I'm on AT&T and also tried disabling the proxy.
I also went under Program Files/Tellme/ and ran the update tool. It seemed to uninstall and reinstall. But it again still does the same. I've also been dabbling in the registry...but didn't find anything of much help.
I'm going to keep messing with it and see if I can find something..
Chris
segadc said:
I get to 72% but then it says "There was a problem Starting Tellme. Try again later
Click to expand...
Click to collapse
Same... I'm thinking that this may be WM 6.5 dependant
segadc said:
I get to 72% but then it says "There was a problem Starting Tellme. Try again later
Click to expand...
Click to collapse
Make sure you install it from the phone and not the pc.
Aaron McCarthy said:
Same... I'm thinking that this may be WM 6.5 dependant
Click to expand...
Click to collapse
I got it running on sprints 6.1 stock rom on my TP1. i actually got it working on 4 different roms today, just not the one that's my favorite, dcd 2.16 wm 6.5 Strange thing is, another guy on ppcgeeks said he "did" get working on dcds 2.16 rom. almost seems device dependent in some cases.
dschoenike
noellenchris said:
Installed and touch works. Recognizes contacts but when texting, I say what I want it to transcribe and it says thinking...then says cannot connect to network. Also if I say pizza or whatever it doesn't recognize anything or open default browser. I'm on AT&T and also tried disabling the proxy.
I also went under Program Files/Tellme/ and ran the update tool. It seemed to uninstall and reinstall. But it again still does the same. I've also been dabbling in the registry...but didn't find anything of much help.
I'm going to keep messing with it and see if I can find something..
Chris
Click to expand...
Click to collapse
Everything works great now using activesync for internet.?
I installed it on my Tilt 2 running wm 6.5 and when I try to text someone I get an error saying that "can't access mobile network", but everything else works, It also is pretty slow.
Yeah all the problems associated with this program thus far are pointing to network issues. I'm starting to think it isnt 6.5 dependant.... Especially since dschoenike got it working on his Sprint stock rom
Amnya over at PPCgeeks posted this cab file. I installed it and low and behold the programs now on the phone. That said, I cant do much with it. Any search I try just comes back with a network error, same with sending a text message "can't access mobile network"
I cant even get it running on my diamond with bsb 6.5.1 rom. Installs itself ok (or at least it doesn't throw up any errors), but when i try to run it nothing happens.
it installs ok on my touch hd wm6.5 manila 2.1 (miri v29) but when i run it nothing happens. I just see "tellme" briefly at the top of the screen where the clock is and that's it.
Currently I'm running the Cell Pro V11 and although I don't think this ROM-version can be the problem, I thought it was worthy mentioning.
I'm trying to get the official F1-applet going that mobile users can download from http://mobile.formula1.com but for some reason it comes up with an OutofMemory-error even when my TP2 has "only" 48% used after a soft reset.
I was wondering if anyone has experienced this as well or that maybe a JAVA-update is in order or that there is some volatile memory that needs excluding in the registry for this app to work.
Really appreciate some answers/pointers from fellow F1-fans.
Same problem for me as well. Haven't figured out what is wrong. Really wish it wasn't a Java applet.
I will look into that. Downloading and testing.
Sergio76 said:
I will look into that. Downloading and testing.
Click to expand...
Click to collapse
Much appreciated Sergio; I know you're quite the busy bee...
In the FAQ section for the TP2 you will find a link to install JavaFX.
The repeat the procedure and you will not get out of memory anymore
Thanks for that; will try later tonight or tomorrow and report back...
/edit: it works... Bit slow though but I will try it out next F1 to see how accurate it is.
Thanks for the JavaFX hint.
Installed fine but unable to login message keeps coming up with unable to find server.
Any hints mates?
stock Sprint TP2 6.5 Sense 2.5.
Woke up this AM in the USA, & lo & behold the app worked for Round 3 of the WCC - Malaysia.
Nice stuff.
Must've been server issues not allowing some of us to connect the last couple of days.
Best advice I can say for Touch Pro2 owners is download the JavaFX & install that before downloading latest F1 App.
Should be able to get the HTC soft keyboard up & running too & u can choose not to use the app's own proprietary soft keyboard.
has anyone been able to install this on their tmobile hd2? i tried installing via opera on my phone and "an error occurred" during installation. when copying the cab file over to my phone and navigating to it via explorer, clicking on it does nothing...doesn't start the installation. installing apps hasn't changed, right? navigate to the cab and click it? i owned the original HD last year and am winmo capable...bah!
thanks,
rob
i attached the ones i downloaded a while ago.
the larger one (1) is beta version - this is the one i prefer.
a message for update will arrive shortly after first use.
awesome, the beta installed fine. i guess palringo gave me the wrong cab version or something. thanks!
you're welcome
wow, that was fast
Palringo is great, but remember that it is better to turn it off when not using.
Otherwise, you will run out of batter sooner than you think
yea, i remember using it on my htc touch hd1. it did hurt battery a bit, but it seemed like the best IM client out there at the time. because i've always got my laptop and bag with me, i guess i'll have to make sure to keep my charging cable with me as well.
antaed said:
a message for update will arrive shortly after first use.
Click to expand...
Click to collapse
after first use of the beta? i haven't received an updated message yet...is it to update to a non-beta full version?
only an updated beta i think.
you have to have a little patience, sometimes it takes 30 mins or so for the message to appear.
hello! I've been using palringo too and I think it's the best messenger app out there but does anyone has this problem? Every time I try to share a picture, I can't launch the camera anymore and have to soft reset...!
i like beejive more but unfortunately it doesn't provide support for its winmo version anymore and sometimes it doesn't work for days. so overall i also think palringo is the best for winmo.
i have never tried to send files through palringo so i can't help.
just one more thing, i've just read somebody managed to run succesfully fring for xperia x1 on hd2. perhaps we might also give it a try
antaed said:
just one more thing, i've just read somebody managed to run succesfully fring for xperia x1 on hd2. perhaps we might also give it a try
Click to expand...
Click to collapse
now THAT'D be awesome!
ce_rob said:
yea, i remember using it on my htc touch hd1. it did hurt battery a bit, but it seemed like the best IM client out there at the time. because i've always got my laptop and bag with me, i guess i'll have to make sure to keep my charging cable with me as well.
Click to expand...
Click to collapse
i have installed parlingo and nimbuzz on my hd 2 was working fine but yesterday i tried to install one game on it and now parlingo and nimbuzz both giving error not signed with the trusted certificate and even not uninstalling can anyone plzz help me..?????
Hi All,
Just need a little help here with TellMe, installs fine but when i send a text message it just sits in the outbox, any ideas? I'm using the stock Tmobile rom.
No one else with this issue? already tried the uninstall/reinstall with no luck.
There was a thread over in the TMo Community with people having the same issue including myself. Not sure what's going on, but my texts are getting delivered a day or two later.
that's weird because after flashing one Kumar's ROM and before sending texts on TellMe worked fine. I downloaded the cab from mobileunderground. Sorry I don't have the exact link, but it is floating around somewhere.
Yeah i used the same link from mobile underground too but me and 2 other co-workers all have the same issue. When you installed from Mobile Underground did you install the NETCF 3.5 from them also?
nyyfan79 said:
Yeah i used the same link from mobile underground too but me and 2 other co-workers all have the same issue. When you installed from Mobile Underground did you install the NETCF 3.5 from them also?
Click to expand...
Click to collapse
No, I didn't need NETCF 3.5.
Maybe you do need the NETcf3.5. The easiest way that I have found to do this is by downloading "Hunting Lite" game from the market and it installs it automatically. It's worth a try because when TellMe works for texting it is a REALLY useful feature
Tried the hunting lite install and still sits in outbox, im going to hard reset my device and see if something else i installed is causing this. Do you use the standard text settings?
nyyfan79 said:
Tried the hunting lite install and still sits in outbox, im going to hard reset my device and see if something else i installed is causing this. Do you use the standard text settings?
Click to expand...
Click to collapse
yes using standard text settings
Received a reply from TellMe saying that this device is not yet supported.