Hi, I've installed lasagna3.3 and now i'm not able to connect to activesync both 4.2 and 4.5. Could you help me? Thanks a lot
maxxy28 said:
Hi, I've installed lasagna3.3 and now i'm not able to connect to activesync both 4.2 and 4.5. Could you help me? Thanks a lot
Click to expand...
Click to collapse
Try:
1. disable advanced usb (or enable)
2. soft reset/hard reset
3. uninstall previous PC drivers
I've tried but nothing change. on the p3600 I read error 608.
Thanks
I had a problem where the phone would connect to active sync, but would generate an error on the PC and would not sync.
After a good google, I found that this is a common problem with no specific cause (mine was caused by some SPB software).
I think you will waste a lot of time removing software, changing settings etc (like I did) so best thing to do is back up any important stuff and do a hard reset.
Try this http://www.malcolmhall.com/?p=37
Related
I can't make a standard partnership with my PC, everytime I get this messege and I makes e crazy :evil:
I tried to reinstall actuvsync, make a new partnership, delet the old partnership but nothing happend.
Please help, I can just make a quest partnership
is it the latest 3.7.1 ?
Yes it's v. 3.7.1
Shaytaan,
Are you able to try it on another PC?
If you can do so, at least you can narrow down the issue by eliminating the PC side, to then concentrate on the XDA.
I'd be thinking it's a database corruption on the XDA though, and I imagine a cold boot would be required to get everything working again. That said, I'm not talking from experience here - just thinking out loud I guess....
Codenix. :roll:
Thanks for replying
Soft reset didn't solve the problem, I tried many times.
I guess the problem happend after I installed Experince 2.0.3 and my dashboad disapeared from my ppc destop, so I decided to uninstall Exerience, after that I can't connect to my activsync again and there is nothing mentioned at activsync troubleshooting :x
Can anyone help please :roll:
Okay, then it sounds like it's more of a PC-side thing (if reset didn't fix it).
Once again, can you try it on another PC? If you find that you can set up a partnership on another PC, then it's going to be something on your PC which is causing the problem.
If you're using Win XP (and you know when the problem started, and you're using the built-in XP restore points which are on by default), you might be able to restore your PC to a point before your problems occured.
Codenix.
I could also imagine that the problem is on the PC side of things. What OUTLOOK version are you running? May it be that you have some corrupted data in there?
As bad as it sounds... you may need to go through a re-installation there...
thanks...
I have officeXP 2003 and winXP pro sp2
Now I hard reset my PPC and reinstall activsync.
dear all
i can not run activesincron in the pc with my xda2 true the usb cradel
but the bluetouth work fine also the cradel work
he charge the device
please have you any suggestion ???
the device is too slow the are any suggestion ???
i have qtek 2020 with
Rom 1.66.02 FR
Date of rom 02/23/04
radio ver 1.10.00
protocol 1337.18
ExtRom 1.66.211
make sure you have ActiveSync 3.7.1 or re-install it ... delete and re-creat the partnership if needed
Biso007 said:
make sure you have ActiveSync 3.7.1 or re-install it ... delete and re-creat the partnership if needed
Click to expand...
Click to collapse
hi biso007
thank's for your replay
yes i do it but noting
the strange that i can by connected true bluetooth
i dont like to make a hard reset .... :evil:
have you tried opening activesync on your pocketpc
clicking tools
clicking option
clicking options
clicking enable pc sync when using this connection
and choosing 'USB ?
Rudegar said:
have you tried opening activesync on your pocketpc
clicking tools
clicking option
clicking options
clicking enable pc sync when using this connection
and choosing 'USB ?
Click to expand...
Click to collapse
hi rudegar
thank's for your replay
yes
this config is standart and i dont change it
the device work before its only today i dont know whats hapend
also i remove all soft that i install today
checknotifications
clearnotify
phoneled_on-off
Pocket_Hack_Master
i remove all this and i make a soft reset many time
but nothing
also the are no conflict into the usb device and the cradel is know well by the pc
i suggest if there are no pin connection broken (but i see well no pin broken ) it's a software configuration
but how .....
sacaman
and activesync is set to use usb also ?
I had exactly the same problem about a month ago and after trying everything under the sun and nothing working i eventually ended up doing a hard reset,
It fixed it instantly so i restored all my data from a backup and it stopped working straight after the restore,
i hard reset once again and it synced ok, so i then had to reinstall all my programs individually rather than restoring the backup, it was very annoying but i dont think theres any other way around it
hi all
thank's for your response
it 's ok now but after making hard reset :evil:
i mst install software one by one to know who create this problem
and i keep you informed
by after all backup :evil: :evil:
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Did you disable Win XP firewall? You have to disable it or any other firewall that may be installed.
If that solves your problem search MS site for how to authorise ActiveSync for your firewall.
Yes, in fact when I reinstalled windows I didn't install Norton because of the firewall. I have also unactivated windows firewall... but no sincronization occurrs
Maybe you could try another USB Cable? Or try to sync using Bluetooth?
Can't sync my S200 either...
Don't think it's cable because it is brand new :'(
Have you tried to upgrade to the latest activesync right after the installation of windows? (found here)
And perhaps some overactive antivirus programs can bug up syncing too sometimes. Did the installation of new hardware go well after you plug in your device?
When you plug in, did nothing happen or was there a small screen saying it was getting information from the phone? If yes, were you able to setup a connection (guest etc) and after that it didn't want to sync?
Got this issue resolved the fault was some tweaking I did... See, I use fixed IP with my router so I disabled the DHCP client service on services.msc... So activesync could't get the right adress from the prophet... Still don't know how I manage to make that assumption about this problem, but gladly I did
Hope this help other people with similar problem...
Same issue
tonimacaya said:
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Click to expand...
Click to collapse
Did you manage to fix your USB problem?
I need some support with the same problem.
Regards,
h
All,
I am currently able to charge my TYTN, but unable to get a USB connection to activesync; any ideas?
I have tried switching off the usb advanced but i doesn't work...
When I soft reset while the USB cable is connected it starts up in bootloader but does not show it is connected via USB.....just nothing but the bootloader startup screen.....
IPL is 1.01 and SPL is 1.04.
My rom is the latest South African....
Ant help would be very nice,
Cheers,
HJ
sounds like a firewall problem. Try disconnection from the internet and disable your firewall. If it connects then, adjust the firewall settings before reconnection to the internet.
I had the same problem with EZ Firewall
Nope, it is not the firewall, it used to work perfectly and it suddenly doesn't...
2 different computers have the exact same problem..any ideas?
I'm sure you've probably tried these, but just in case:
Reset device & stop activesync on device (memory/running programs)
Reboot laptop/pc
check in task manager that activesync is not running in the background
Delete existing partnership in Activesync & set it up again
marisa4755 said:
I'm sure you've probably tried these, but just in case:
Reset device & stop activesync on device (memory/running programs)
Reboot laptop/pc
check in task manager that activesync is not running in the background
Delete existing partnership in Activesync & set it up again
Click to expand...
Click to collapse
Yeps, tried all of that.....even ahard reset....
But still no succes, now back to syncing via IR....
Just :
START > SETTINGS > CONNECTIONS > USB to PC (then untick this box)
Then try again, worked OK for me!!!
use USB switch program
try install this program in your PPC and after that change activesync via serial instead of RNDIS.
worked on my Unieversal but i do not know yours
i don't think you need this program as it is already available in control panel -> connections -> usb-pc
hellejoep - any progress in solving this problem? I seem to be having the same problem with mine - tried activesync 4.2 and 4.5 on two machines - running the latest SA ROM.
pole_vaulter12 said:
hellejoep - any progress in solving this problem? I seem to be having the same problem with mine - tried activesync 4.2 and 4.5 on two machines - running the latest SA ROM.
Click to expand...
Click to collapse
The weird thing is that I got it to work on my home WinXP pc with a different cable....
I need to do some more testing...
Cheers,
HJ
Unable to connect
Hi,
I have the same problem. Anyone solve this?
I have a cable that just wont sync, try a different cable maybe.
wpbear said:
I have a cable that just wont sync, try a different cable maybe.
Click to expand...
Click to collapse
I'll do and let you all know!
I tried another cable but that one also recognises my an unknow device.....is it somewhere in my USB drivers?
This pc is Win2k SP3, on my XP SP2 it was working....
Any ideas?
I had a defective cable. It did exactly what you are describing. All other cables worked fine.
First of all i really want to thank all the Helmi_c and all the developers; My BA is most updated running wm6.
Well much better than wm5 but I have some issues:
1. cant sync it with my PC in anyways (BT, usb etc), USB drivers are not working correctly.
2. sometimes when i pick or dial a call, i cant hear nething.
and last but not relevant to this, guys how do i stop my BA slider from falling down when I use keyboard.
1. Try delete the actual partnership in AS, sync again; if not reinstall AS on PC
2. No problem here with the sound.
same problem here
I upgraded my XDA2s, customized it,backedup, then upgraded my brothers XDA2s and used my customized backup on his XDA2s.
Now my XDA connects fine, but his doesn't !!!
Both our XDa2s's are identical in everyway.
tried a hard reset and restore from another backup and still no luck!
we were trying to save time re-installing the same softwares.
tried deleting partnerships, no luck. tried spb backup and clone, no luck.
any ideas!
Do you get any error messages on AS? Can you browse the internet from device?
usb drivers
can anybody post usb drivers i think this is the problem cause my device isnt installed properly it says problem with inf file.
whoever is able to connect his device to xp desktop via active sync usb connection, please copy the drivers folder contents from program files in active sync folder.
thanks, hope this works
Is your windows firewall enabled? Since WM6 activesync makes use of a LAN connection to sync with the PC, you must allow activesync trough the windows XP firewall, or disable the windows XP firewall completely...
no sound problems with me...
did you try to install WM6_SoundFix_.cab ?
A-