hi my handset dopod 818 pro which was working very slow when i installed n software, i got n software from this site of radio rom upgrading but after this my handset in not working, then i made it factory resetting then to its not going further, the message indicated when i pressed the camera+comm+rest after this the message came press send button after that in the screen show dopod & in the top of the screen first there was 4 lines was coming ipl, spl 3rd line was radio rom now which is not showing & the last os this comes after that the handset goes shutdone, can u guide me what to do for this will very thankful for this
thanking
I think you want to hard reset your device... before doing that make sure you're alredy back up your contacts and Messages.
To hard reset There are 2 ways..
1. Start> Setting > System> Clear Storage... when asking for password type 1234 and Press Yes option..
and the other way
2. With Pressing Comm Button + Camera buton and then reset the device.. remember dont release the Comm Button and Camera button.. when asking to press the Send Button.. Press it.. and release the Comm button and Camera button.. and after that. also release the send button...
If Success your device gonna back to It Factory Setting..
Related
hi my new dopod has a problems
after soft reset it struck on HTC BOOT Screen
i hard reset it using 1]camera button 2]connection 3]reset
and press green key
but stiil struck on HTC screen
please i want om update
thanks
Hi, u might try this
step 1
camera + connection + reset
step 2
hold camera + connection, just release reset only
step 3
still hold camera + connection + green button
should be ok, there is mistake on the manual, the way u do should be still performing soft reset, I think
ok i tried that ant it says format complete but still stuck on HTC
tried rom update but error 260
please help
what is the send button ?
A black screen tells me "press send button to format".
but i don't know what the send button is...
help !
send buttom is the "green phone" buttom
in other word, the buttom you make call...
Ok got my phone doing some funky stuff...
Before I turned off the phone, the phone was default, with extra programs that is all. Basically i was doing my thing, then the phone kept trying to record a new sound file, in the notes section.
I turned off the phone and back on, now the phone starts in the bootloader, 3 color screen.
I can successfully patch ROM files to the phone, but I can't get past the bootloader. I have pulled all the casing off the phone, just to see if anything was holding the buttons in, but no such luck either.
IPL 2.20
SPL 2.20
Loaded on some of your rom's cause it's about time i did this.
I can hold the camera key, and get to the reset factory default, but when i press the green key nothing happens. Anyone got any idea's what is going on
fixed with a hard reset
how to hard reset this model ?
com button, power on +camera ;keep them
how to do this ??? and what - where is the Com button
how to do this ??? and what - where is the Com button ?
what is ???
please reply to this email [email protected]
Hello. First all sorry for my english.
Since a few days the buttons of my pda are crazy and don't work properly.
For example: The power button don't switch off the pda, but if I press and hold the button for a few seconds, switch off the ligth of the screen. This mean that the button isn´t broken, is it??? With the cam and record button it´s the same. If I press those buttons on windows 6 it works perfectly but i want to hard reset my pda and when reset and press whe i have to change "Clean Registry Hive " and "Format Storage" I can't change these options and cant make hard reset.
Then that is the question:
How can i make hard reset?? is there an alternative metod???? At Qtek S200 there is an application that clean the memory. It Exists for my blueangel??'
There is any application than do it???
Thanks. I´m waiting for answers.
u can use psshutXP it can do a hardreset with confirmation by holding the upper right corner of the application.
Hello.
Thanks for your answer.
I have tested your option, but it seems that the hard reset doesn´t work in wm6. It changes time and date, but don't clean memory, because i have the same programs than before.
I need another metod.
Thanks.
here u are..
just reset first your device, than after you see the stripped screen, press the record and camera button quickly before the the version appears (radio,etc).. then you will see the three options..
enable kitl should be no
clean registry hive should be yes
format storage should be yes
to choose just use the camera and record to change the options...
good luck
cheers
adri..
Hello evoluzionne.
I know that way to do hard reset, but my problem is that i can´t change the options:
enable kitl should be no
clean registry hive should be yes
format storage should be yes
In Windows Mobile 5 or 6 the camera and record buttons works properly, but when I reset the device and press the record and camera button quickly before the the version appears (radio,etc).. i can´t change the optios. It´s seems like the buttons don´t work. But i know that the buttons works, but the buttons don´t change the options. It´s very stranger.
In the power button is seemed. I can switch on the device, i can switch on/off the screen if I press and hold the button but i Can´t switch off the device. It´s incredible. My buttons are crazy. So i want to do downgraded to WM2003 ( so I need to do hard reset).
Do you know why are my buttons crazy????
Thank for your answer, and sorry for my english
Ciao
Hi,
Just wondering if you resolved the issue. I am having a similar problem on pda2k upgrading from wm5 to wm6. Buttons work except during boot menu so i cannot change options.
Appreciate your help.
MC
melilleny said:
Hello evoluzionne.
I know that way to do hard reset, but my problem is that i can´t change the options:
enable kitl should be no
clean registry hive should be yes
format storage should be yes
In Windows Mobile 5 or 6 the camera and record buttons works properly, but when I reset the device and press the record and camera button quickly before the the version appears (radio,etc).. i can´t change the optios. It´s seems like the buttons don´t work. But i know that the buttons works, but the buttons don´t change the options. It´s very stranger.
In the power button is seemed. I can switch on the device, i can switch on/off the screen if I press and hold the button but i Can´t switch off the device. It´s incredible. My buttons are crazy. So i want to do downgraded to WM2003 ( so I need to do hard reset).
Do you know why are my buttons crazy????
Thank for your answer, and sorry for my english
Ciao
Click to expand...
Click to collapse
Another BA with the same problem
melilleny said:
Hello. First all sorry for my english.
Since a few days the buttons of my pda are crazy and don't work properly.
For example: The power button don't switch off the pda, but if I press and hold the button for a few seconds, switch off the ligth of the screen. This mean that the button isn´t broken, is it??? With the cam and record button it´s the same. If I press those buttons on windows 6 it works perfectly but i want to hard reset my pda and when reset and press whe i have to change "Clean Registry Hive " and "Format Storage" I can't change these options and cant make hard reset.
Click to expand...
Click to collapse
Hi,
I have an exact problem as you. I've followed any info about hard reset, I've red wiki 100times, searching using Google but perform hard reset or enter to bootloader mode on my BA is IMPOSSIBLE!
In November I've upgraded to WM6, ROM from pdaviet, OS 5.2.2000 (Build 20000.1.0.0.PV.HAT)
MDA is working without problems, I can use phone, wifi, camera, record, BT, ActiveSync 4.5.
Right now I want to upgrade to new ROM from pdaviet but I stuck with a step: enter to bootloader mode
I've tried psShupXP software, which is capable do a hard reset. Still no luck, after software hard reset my BA comes on with all files installed...
Unfortunatelly mtty doens't works too, I can't see any WCEUSBSH001 port...
I'm not alone, but the bad news is that I don't find any solution
Thanks for any hint
R.V.
I have the same problem as you do, except I can enter BootLoader and Hardreser, but I can't turn off my device with power button, and if I hold it for long it shuts the backlight.
If anyone had any sucess solving this please share how...
Thank you.
evoluzionne said:
just reset first your device, than after you see the stripped screen, press the record and camera button quickly before the the version appears (radio,etc).. then you will see the three options..
enable kitl should be no
clean registry hive should be yes
format storage should be yes
to choose just use the camera and record to change the options...
good luck
cheers
adri..
Click to expand...
Click to collapse
I am following the same exact steps...flashed rom for the 5th time...hard reset is not working. The problem...'Mail' button (the hardware key) does not respond. I can change the options from No to Yes. But after pressing the 'mail' button nothing happens. Please let me know if there is another way to clear the registry hives and format the storage!!!
have you guys tried the MTTY alternative? i think it's somewhere here in the forum.
I am having the problem described in here.
By holding the record & media button, it *does* go to the hard reset menu, so obviously the record and wm buttons do work (ie is not a physical problem with the buttons), since these buttons do get it to the menu, it just does not allow any changes to the options (KITL, format storage, format registry hive)...
It is maddening, because I am stuck with the oldish pdaviet WM6 rom that crashes for me all the time and I want to try the newer 6.1 ROMs but can't hard reset and have seriously considered finding another used BA on ebay to start fresh it is driving me so nuts.....
I am about to search for the MTTY method described by samurai above... assuming I locate and can do it, I'll post results....
what do you mean "it just does not allow any changes to the options"? do you mean it wont let you navigate through each options? or do you mean it wont let you change from yes to no or no to yes?
any changes to the options are executed only after you have pushed the "mail" button
SilverSamurai said:
have you guys tried the MTTY alternative? i think it's somewhere here in the forum.
Click to expand...
Click to collapse
Catch:
http://forum.xda-developers.com/showthread.php?t=378640&highlight=MTTY
tried it myself - works great!
Bird
Hi,
My 3400 is not starting. When i start the phone it hangs up in the "windows mobile direct push technology" screen. I tried without SD card and SIM but no luck. I have all my contacts inside and I need them. How can I fix the problem of my phone. Please help.
ONBL 1.10.0000
SPL 1.10.0000
GSM 2.79.90
OS 1.10.0.0
-aneesh
aneeshnr said:
Hi,
My 3400 is not starting. When i start the phone it hangs up in the "windows mobile direct push technology" screen. I tried without SD card and SIM but no luck. I have all my contacts inside and I need them. How can I fix the problem of my phone. Please help.
ONBL 1.10.0000
SPL 1.10.0000
GSM 2.79.90
OS 1.10.0.0
-aneesh
Click to expand...
Click to collapse
i don't think u can save ur contacts now
just hard reset ur device but all data will be lost.
How to do the hard reset? please tell me.
no way to save data?
Hi,
I searched google and got the method to hard reset.
-------------
To perform a hard reset (Full Reset) press and hold the left SOFT KEY and the right SOFT KEY, and at the same
time, use the stylus to press the RESET button at the middle left side of your device.
Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
This operation will delete all your personal data, and reset
all settings to manufacturer default. Press Send to restore
manufacturer default, or press other keys to cancel.
Release now the two SOFT KEYs, and then press the TALK (Send) button
---------------------
But when I press the reset button phone restarted but nothing siplayed as mentioned above. Again it went to windows screen and hung there! Cant even do hard reset? What can I do now? Please hlep.
It is ok now. thanks
aneeshnr said:
It is ok now. thanks
Click to expand...
Click to collapse
its nice to hear that ur device is working .
enjoy!!
I was update my htc p3400i ROM, after completion. Phone turn off but not restart, if I try camera button and reset button only green and red right blink not any indication shown on screen,…please help me.
I shall very thankful, if you solve my problem
Sanmukh singh
MSL, Mumbai.
sanmukhsingh said:
I was update my htc p3400i ROM, after completion. Phone turn off but not restart, if I try camera button and reset button only green and red right blink not any indication shown on screen,…please help me.
I shall very thankful, if you solve my problem
Sanmukh singh
MSL, Mumbai.
Click to expand...
Click to collapse
which rom u have updated??????????
hi deepav84,
i was updating this rom "RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship" after 100% complete it turns off , but not start only Green and red light flash during press reset button...
i was try all methods,#remove batery 20 sec and then start with camer button & both camera and voice button, nothing shown in USB in PC. but result is same...
please help how i can recover my device.....
hi, i am in need of som serios help, im a total noob n i flashed my first ROM with Duttys_Leo_Sense_2.5_5.21905.5.0.93_2.13_Radio_2.10.50.26_HG_V3.4.exe
i then last night decided i wanted to switch over to Miri_Steve0007_Elegancia_V8.5
and now the phone will not reset and has a million crashes! iv been trying to go back to the Dutty ROM bt it dosnt let me. can som1 upload what it is that i need to get the dutty rom bak. thank u in advance
when you say crashing, can you give a bit more info? is it locking on a cirtain screen? or in a constant reboot?
you may want to also read through a few of the stickys as if you use the search you most likley will find the cause.
RE: HELP!
More info would be appreciated but I've had issues before and did this:
Performing a factory reset using phone buttons
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using buttons on the phone.
With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
While holding the volume buttons, press the END/POWER button briefly and then release it.
When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
From that my phone turned on and I was able to create an activesync connection again to flash another ROM.
__________________
Blog: jonathanstowell.com
Rasheduddin said:
hi, i am in need of som serios help, im a total noob n i flashed my first ROM with Duttys_Leo_Sense_2.5_5.21905.5.0.93_2.13_Radio_2.10.50.26_HG_V3.4.exe
i then last night decided i wanted to switch over to Miri_Steve0007_Elegancia_V8.5
and now the phone will not reset and has a million crashes! iv been trying to go back to the Dutty ROM bt it dosnt let me. can som1 upload what it is that i need to get the dutty rom bak. thank u in advance
Click to expand...
Click to collapse
I flashed many roms and never experience like that as long as you do it as per instruction/ guide in the relevant ROM.
I would suggest you to go into bootloader screen (turn of you phone, then press vol up and down together with the power on button).
Install HSPL (only if you havent installed it), perform task 29, flash the radio (check the radio version required by the ROM), and flash the ROM you want.
Everytime the process reach 100%, you press the vol down button to go into bootloader screen so you dont need to pull out the battery or the cable (but for the last process (flashing the rom), you should press vol down and up together (it will go to hard reset). And for better result, please make sure your battery above 50% and use win xp.
Hope you can solve it.