sim toolkit - MDA Compact II General

Hi
I have charmer ROM ver 004.4 -=- CHARMER WM6 WWE ROM by vlodeck & nocturne =-:. Problem GSM banking (Cz e-bank) 1st autorisation mesage is ok,
2nd isn't see, after soft reset 2nd mesage is OK. and next reset next mesage .......
Very big problem.Please help me.

try WM6 Essentials or Touchflo 2.1

I tried both variants but the result is same

Related

T-Mobile MDA Compact Freezing !!! HELP !!!

Hi All,
I have had my MDA compact since April and all of a sudden over the last week or so it has started freezing up ???
Nothing i seem to do can wake it up and I am not getting any backlight. At present the time on the device is frozen at 21.25 the last time i had it working ??
The only remedy i have is to perform a soft reset which brings it back to life but only for a short while then it freezes again.
I have also tried performing a hard reset but the problem wont go away.
I only have the basic installation with not one single add on.
My device info is as follows
ROM Version - 1.01.00 WWE
ROM Date - 10/21/04
Radio Version - 1.00.10
Protocol Version - 1337.36
So if anyone can help me please post a suggestion. A mate has suggested a ROM upgrade but i cannot find one for the T-Mobile MDA Compact/
Please Help
Thanks in Advance
Kev
I also had this problem before and ROM upgrade help to me.
For upgrade Ur T_Mobile MDA Compact U can use any Qtek or I-mate ROMs for Magicians.
I use WWE_11200_550_11200.zip and haven't any problems now
In this topic: http://forum.xda-developers.com/viewtopic.php?p=166195 it is said the problem is hardware and a ROM update is useless.
CraF > Please explain what is fixed ...

MDA Compact 2 Upgrade Error (95%)

Hello,
I wanted to upgrade my MDA Compact 2 to AKU3.
I started the update tool, like described in the forum here. The progressbar
on my MDA screen appears and when 95% are reached the update tool give me the ERROR [302]: UPDATE ERROR.
The reset of my MDA gives me only the 3color Boot-Loader Screen with the following Numbers:
IPL 2.06.0001
SPL 3.08.0001
and RUU in the right top corner.
Has anyone an idea to solve this problem, an downgrade to the old AKU2 can also not be done, because i get always the error about an wrong vendor ID.
I read a thread, to unlock CID, but this is not possible in Bootloader Mode, or?
thanks
Michael
SOLVED
Hello,
I solved my problem!!
I installed the Radio ROM Upgrade:
ftp://[email protected]/Uploads/Prophet/Prophet-roms/Radio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe
and it works.
There is maybe at 95% the Radio ROM Upgrade, and this worked not with the AKU 3.3 Image.
greets
Michael
I have the same issue. It's asking me for a password when I click on your link.
@optical, read the FAQ
@mwulz, thanks a lot ;-)
I got the same Problem. Does the link also work with the T-Mobile MDA Vario?
I don't want to crash my MDA Vario...
Thanks in advance
No, it won't help you. It's the radio rom, so it will not fit your wizard. You can try to flash any radio rom for wizard or any splash.
@mwulz
Thanks to you, I had the same problem (95% Error) and my mda compact II stoped working. With your tipp it works again!
Markus
mwulz said:
Hello,
I solved my problem!!
I installed the Radio ROM Upgrade:
ftp://[email protected]/Uploads/Prophet/Prophet-roms/Radio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe
and it works.
There is maybe at 95% the Radio ROM Upgrade, and this worked not with the AKU 3.3 Image.
greets
Michael
Click to expand...
Click to collapse
I have the same error on my Charmer with the AKU3.3, downloaded from the German T-mobile HP. Now I want to solve the problem with your described Radio-Rom but it is not downlodable from ftp://[email protected]/Up...adio_ROMs/Prophet_G3_G4_RadioRom_v2.69.21.exe !! What can I do??
it is downloadable, just type in password "xda".
thanks.
my charmer is in life again

Wizard doesn't boot!

Hi!
I have a problem. I installed WM6.1 on my VPA C2. Everything went fine, but WM6.1 seemed to be slow on my device. So I decided today to downgrade to the original Qtek AKU2 WM5. After I was done downgrading my VPA is not booting and hangs up on the provider screen with the Vodafone Logo.
Here my facts:
IPL 2.21.0001
SPL 2.21.Olip
GSM 02.19.11
OS 2.18.7.7
Please tell me how I can reactivate my device.
Soft- and hardreset didn't work.
Greetings,
Chris
moiney said:
Hi!
I have a problem. I installed WM6.1 on my VPA C2. Everything went fine, but WM6.1 seemed to be slow on my device. So I decided today to downgrade to the original Qtek AKU2 WM5. After I was done downgrading my VPA is not booting and hangs up on the provider screen with the Vodafone Logo.
Here my facts:
IPL 2.21.0001
SPL 2.21.Olip
GSM 02.19.11
OS 2.18.7.7
Please tell me how I can reactivate my device.
Soft- and hardreset didn't work.
Greetings,
Chris
Click to expand...
Click to collapse
Your phone is HardSPL,did you first remove it before flashing wm5 ? if not than you have to first remove the HardSPL flash back to official original vodafone IPL/SPL and than flash official wm5.
Well,you are lucky,if it still boots up or goes into Bootloaders,coz flashing a rom with IPL/SPL even if its an official rom, to a HardSPL device will 'Brick' the phone.
Now,if it still gets into Bootloaders,reflash any custom build wm6 or 6.1 rom to recover the phone,than remove HardSPL,flash back to official IPL/SPL and than revert back to wm5,hope it'll work out.
@zabardast_1: Thank you for the fast answer!
Okay, I now flashed the phone again w/ WM6.1. Everything works again.
What do I have to do now to get WM5 back on the device? I don't want the Vodafone ROM, I want the Qtek ROM. How can I remove the Hard SPL so?
Greez,
Chris
Read and do the method explained in this thread and remove HardSPL :-
http://forum.xda-developers.com/showthread.php?t=342744
The Mighty Search
...knows all!
Hint:
try "remove HardSPL"
Thank you all!
Everything is back on WM5 and working!
Thanz!
Have a nice day

Artemis does not boot

Hi!
My Artemis just stopped booting.
All I see is the T-monile start screen.
I tried a softreset as well as a hard reset. nothing helped.
I can just enter the Bootloader.
CID is not unlocked yet.
g_cKeyCardSecurityLevel = FF
Is there a possibility to do this from bootloader and start a ROM update from Bootloader menu?
Original ROM is Austrian T-Mobile.
IPL 3.15.0001
SPL 3.15.0000
GSM 03.06.90
OS 3.15.0.0
hope somebody can help me.
I found an Austrian Original ROM for T-Mobile!
Now everything works fine!
http://rapidshare.com/files/294586683/CompactIIIUpdate.rar
hello everyone ....i want to upgrade my o2 orbit wm6 to wm 6.1 or any cooked rom currently i am using wm6 but the problem is my active syncro is not working is there any other to start uspl without acive syncro.....give some suggestions ...thank for ur time...

unlock htc magician - s100 problem

howdy ... i want to unlock my s100 and i`ve found some free solutions that....
HTC Unlock 1.2 doesn`t support Magician platform (it ain`t in the menu ) ...... i`ve tried also with xdadev_all_unlock but it says "unknown deviece type HTC Magician"... here is the log :
"xdadev_all_unlock started
device=HTC Magician
could not find security key for device type HTC Magician"
if there is any help i`ve installed on it rom v 3.03 wwe by cotulla, radio version 1.12...
do i have to have installed another official rom for this to work?.... thank you

Categories

Resources