I was Upgrade my Imate-jam with Rom 2.03 TX WWE
But There are lot of bugs in this rom
so now i want to down grade my jam to its previous state but when i enter in bootloader mode Screen shows that
Serial
V 1.00
I plug my usb cable to jam but Serial didnot convert in USB some one told me to downgrade the rom through SD Card
I have 1 GB Kingston mini SD card but now what i have to do now nobody help out me to this trouble i tries lot of searches but invain.
Now i am getting in trouble with my jam kindly some body guide me whole process with files support because i have no files regarding Rom upgrading/Downgrading through SD Card
Thanks a lot..
Hassam Moin
[email protected]
[email protected]
Related
Dear All
i try to Update my Qtek 1010 to wm2003 in 82 percent i got this error msg "Upgrade rom image error" with Error 009
and in my Qtek i cannot do any things ( Soft and Hard Reset )
any help will be appreciated
Qusai
If hard reset doesn’t help and your device seems to be dead, you can still use the Bootloader method to update your ROM. There are several topics in the forum, which describe the process in details. You can search for them.
i dont have SD card .. any why by using USB
qusai said:
i dont have SD card .. any why by using USB
Click to expand...
Click to collapse
You have to borrow or buy one. If you can afford an XDA the SD card can’t be a problem…
If your device is dead this is the only chance to revive it. Of course if you have warranty you can try to get it replaced. But they may discover that you tried to upgrade the ROM, which is usually considered as a violation of warranty…
yeah an usb connectable 6 -1 flash card reader and a 64mb sd flash card is not that great an investment
i bought one SD card Xtreme 128 MB
and i cannot install it in my seconed Qtek ..
SD card not detected
any help
regards
Try to format it using an SD card reader...
it is SD Secure Digital card ..
i format it by using Digital camer .. still Qtek cannot detect it ..
any help
regards
Qusai
Hello, GREAT FORUM!
I have installed 4.01.16 ROM from lumpistefen kitchen. It's working normal, but a little buggy for me and i wonna to return to my origial 3.17 O2 ROM (i have nk.nbf).
But i can't do it from XDATools directly. The only way, as i see, is update from bootloader. I haven't SD card reader, so i write my 3.17 ROM with XDATools on 128 Mb SD card, using builtin XDA SD card slot.
Then i restart XDA to bootloader (press power+soft reset), which shows me following on the screen:
Wallaby Bootloader
5.15
GSM OK
That's all! What should i do next? How can i start re-flashing?
Can it be bootloader problem? Can it be solved fixed with pnewbootloader from XDAUtilities package (from XDA-Developers). Or i can make my device not loadable at all?
One remark: After rebooting WM2003 promt me to format my SD card to make it readable. Is it correct? Or there are some problems in SD card writting process..
Please, give me some ideas, what should i do! :wink: How can I re-flash my ROM?
I had a similar problem. I tried using XDATools to write a ROM to my SD card but when rebooting-with power key.. it went to the diagnostics screen directly. So I used XDArit1.exe to write to the SD card and this time the XDA recognised the image on the SD card and went into the SD Download screen. But to do this I had to borrow an SD Card reader from a friend.. Oh Also. I did make sure I had Bootloader 5.15 before I did this.
hi all
may i konw where can i find the old version of xdarit?
cos i already try all the method but cannot used for me
cos i have bootloader 6.22 wrongly update to t-mobile ppc2003
kingmax card reader n 1gb transcend sd card.
cannot use a xdatools cos it pop up same problem most of people that problem in here...
xdarit 1.02 cant used cos it display failed to open devices
any solution other than use xdarit old version
hope all expert in here can help newbie like heheheh
ok thank you in advance
I have a problem, the SD card works, the device asked me to format it, but after the format my S100 detects it as a 135 MB card. I don't have a card reader to try formating the card in it , but while in the phone i tried to format it from my PC - no change - after the formating it's still detected as 135MB. How can I fix this?
I've tried Resco Explorer, Softick CardExport II<both format on the device and from my PC in card export mode> and Pocket Mechanic<both in FAT16 and FAT32> - all the three of them detect it as 135 MB card. The card is working great with Universal, and in camera the card is working too, so it's OK and it's realy 1 GB....
the brand is 1GB PQI hi-speed 133
============================
S100
1GB PQI hi-speed 133x
R 1.13.00
G 1337.43
D 1.13.00 WWE
Subject: 1GB card detected as 135MB????? HELP ME PLEASE
Hi use this app inside the windows with a card reader,
CompuApps SwissKnife V3 3.22
link: http://software-files.download.com/...48&siteId=4&edId=3&pid=10485574&psid=10070864
good lock , [/quote]
10x, pal, as soon as i 've tried i'll write what's the result.
There's some kind of problem- Swissknife gives me an error when I try to run it under Windows XP SP2. During the install there were no errors. But the program crashes everytime I start it up... I've downloaded again from the developers site reinstlled it and - nothing - it gives me the same error again. everytime I run it I end up witjh the MS error reporting tool...
Problem Solved
IT WORKED. I've just needed to restart my PC. The card is shown now as 955MB card. Great tool. I've even succeded without the card reader-used Softik Card Export II and formated the card via the USB directly on my Qtek
+++++++++++++++++++++
Credits and thanks go to ronald11
10x buddy
+++++++++++++++++++++
I have a Wallaby that I have just bought, I decided to upgrade it to Windows Mobile so that it would work with Vista, or so I thought.....
I went to the ROM Kitchen and built a WM2003Final with 4.0.12 (or thereabouts) EXE rom.
Connected my wallaby and it failed during the upgrade, no issue, my laptop has an SDCard reader/writer on it so thats cool I can upgrade that way.
Got OSImage and XDATools and an NB1/NBF image (NBF just in case), however, I find that OSImage wont find anything more than 7.58mb on my SDCard (its a 256mb card and has worked as such since the day and hour I got it)
At the moment I have a very nice brick, any tips folks?
Sometimes the internal SD-Card Writer causes Problems. Do you have the possibility to use an external SD-Card Writer?
Stefan
Hi Stefan
I have bought off eBay the following
1 x 64mb SDCard
1 x External Card Reader/Writer
I will use my other laptop which has XP on it to read/write the ROM onto the SDCard.
HOPEFULLY I can debrick it!