Database Users

ROM Upgrade to wm2003

Dear All
i try to Update my Qtek 1010 to wm2003 in 82 percent i got this error msg "Upgrade rom image error" with Error 009
and in my Qtek i cannot do any things ( Soft and Hard Reset )
any help will be appreciated
Qusai

If hard reset doesn’t help and your device seems to be dead, you can still use the Bootloader method to update your ROM. There are several topics in the forum, which describe the process in details. You can search for them.

i dont have SD card .. any why by using USB

qusai said:
i dont have SD card .. any why by using USB
Click to expand...
Click to collapse
You have to borrow or buy one. If you can afford an XDA the SD card can’t be a problem…
If your device is dead this is the only chance to revive it. Of course if you have warranty you can try to get it replaced. But they may discover that you tried to upgrade the ROM, which is usually considered as a violation of warranty…

yeah an usb connectable 6 -1 flash card reader and a 64mb sd flash card is not that great an investment

i bought one SD card Xtreme 128 MB
and i cannot install it in my seconed Qtek ..
SD card not detected
any help
regards

Try to format it using an SD card reader...

it is SD Secure Digital card ..
i format it by using Digital camer .. still Qtek cannot detect it ..
any help
regards
Qusai

Please help me downgrade from 4.00.10 ENG to 4.00.5 or...

Hi,
Anyone can help me how to downgrade from 4.00.10 ENG to 4.00.5 or any other version, let me tell you that i don't have a SD reader and i just got a 32 MB SD card, is there any way to do it without a SD reader.
Thanks

Sure ... use the EXE method, and if it doesn't work (most propably won't after any T-mobile ROM) then get a ROM backup using your SD card from another working XDA that has 4.00.05 and flash your device with it.
Good luck

If you need to use the SD card method, I think you need at least a 64 MB card, probably a 128 MB. From memory the low level image you need to write onto the SD card is 64MB, even though the image you are writing is only 32MB.

Hello,
Thank you guys, i did it with a 32 MB SD card using the new xdatools and it worked for me without using any card reader and a new 64 MB SD card reader.
Thanks

Problems with Bootloader on XDA I

Hello, GREAT FORUM!
I have installed 4.01.16 ROM from lumpistefen kitchen. It's working normal, but a little buggy for me and i wonna to return to my origial 3.17 O2 ROM (i have nk.nbf).
But i can't do it from XDATools directly. The only way, as i see, is update from bootloader. I haven't SD card reader, so i write my 3.17 ROM with XDATools on 128 Mb SD card, using builtin XDA SD card slot.
Then i restart XDA to bootloader (press power+soft reset), which shows me following on the screen:
Wallaby Bootloader
5.15
GSM OK
That's all! What should i do next? How can i start re-flashing?
Can it be bootloader problem? Can it be solved fixed with pnewbootloader from XDAUtilities package (from XDA-Developers). Or i can make my device not loadable at all?
One remark: After rebooting WM2003 promt me to format my SD card to make it readable. Is it correct? Or there are some problems in SD card writting process..
Please, give me some ideas, what should i do! :wink: How can I re-flash my ROM?

I had a similar problem. I tried using XDATools to write a ROM to my SD card but when rebooting-with power key.. it went to the diagnostics screen directly. So I used XDArit1.exe to write to the SD card and this time the XDA recognised the image on the SD card and went into the SD Download screen. But to do this I had to borrow an SD Card reader from a friend.. Oh Also. I did make sure I had Bootloader 5.15 before I did this.

flashing from SD card

hi, i've been reading a lot on this forum lately, because i lost my OS while trying to upgrade with .exe file, so my phone doesn't work now, my wallaby bootloader 5.17 works just fine, i just need to upload the OS to the device, i've bought a 256 SD card, a card reader, i've uploaded the rom using xdatool exactly how you say to do it, i've put the card in and...nothing, i reseted, nothing, i went to the bootloader and nothing asked whether i want to get the rom from the SD card, what do i need to do now to start flashing???

ok nevermind what i wrote in the previous post, i know how to do it, all need now is to know how to put the file wallaby-patch-tool.nb2 on the sd card, neither XDATools nor XDArit cooperates with this file format

ok nevermind what i wrote in the previous post, i know how to do it, all need now is to know how to put the file wallaby-patch-tool.nb2 on the sd card, neither XDATools nor XDArit cooperates with this file format

SD Card Partitioning

I was Upgrade my Imate-jam with Rom 2.03 TX WWE
But There are lot of bugs in this rom
so now i want to down grade my jam to its previous state but when i enter in bootloader mode Screen shows that
Serial
V 1.00
I plug my usb cable to jam but Serial didnot convert in USB some one told me to downgrade the rom through SD Card
I have 1 GB Kingston mini SD card but now what i have to do now nobody help out me to this trouble i tries lot of searches but invain.
Now i am getting in trouble with my jam kindly some body guide me whole process with files support because i have no files regarding Rom upgrading/Downgrading through SD Card
Thanks a lot..
Hassam Moin
[email protected]
[email protected]