Hi,
after I installed the upgrade (from 2003SE to Helmi's WM6), my Left and Right button doesn't work anymore. Last week I tried xplode's ROM, but they still don't work.
Any ideas?
Thank you,
Alex
Open your device and clean the button contacts, this is hardware issue not software one
Related
ok
I was updating the radio, when the power went out....
did I ruin, my jasjar
what can I do, all the screen says is serial on the top and v1.00 on the bottom
now what ?????
Reconnect it and reflash the full rom for your device. It should connect and work ok. I think the roms for each network etc are all available on this site.
I had this recently when I updated my o2 rom. I downloaded the rom file and ran it but active sync kicked up and I got the screen like you said - couldn't get out of it at all, but when I tried running the rom install again it worked and went through ok.
You could try the radio reflash again, but it's looking like you need the full rom first.
well like everything else in my life, it not that easy
when I connect to active syn, it tell me unknown device connected
it is like a hi fi brian treaser
connect the device. You will see usb message on the screen and activesync WILL NOT connect. Then execute the update again....
I had this a few weeks ago, try a hard reset, press the two keys with the lines accross them at the top of the keyboard, and at the same time press the reset key. when it comes back up with the grey screen select the option to continue and re-dock the PDA to re-start the install, it worked for me - good luck - Mike
Hi all,
Big issues!! I upgraded my ROM to 4.20.?? and all appeared to be working fine but now when I press the on/off button the XDA turns off and I can't turn it back on except if I soft reset.
Also, I can't see to upgrade or downgrade the ROM. An error comes up saying the connection had been inaccessible.
Is there an easy way to downgrade the ROM. This problem all came about because the sound on my XDA kept dropping in and out!! Now there's no sound and a few OTHER issues!!
Any help would b greatly appreciated.... anything at all!!
Have you installed a "clean" ROM or with included applications?
Very often KSE Truefax causes this issue....
Stefan
What do you mean by 'clean ROM'?? As far as I'm a aware there weren't any extra applications (I did not cook the ROM in the kitchen if that's what you mean??)
I downloaded it from the FTP here & loaded it through the USB cradle.
Any ideas??
Ok. So you have a "clean ROM" when it is directly from the ftp.....
In the beginning it worked for you?
Have you installed any appliacations on it?
Stefan
Haven't installed any additional applications... the OS works fine... it's just that there's no sound and when I press the on/off it turns off altogether and I have to soft reset.
So no ideas then I take it?? :shock: :?: :?:
I have Telus P4000, and recently a few buttons stopped working. The following buttons dont work Widnows key/Ok Button/Soft Left/Soft Right/Green Phone/Red Phone/ Mail Button/ Internet Button on the top. On the Right Side the Camera and COMM manger button do not work. On the left side the Ok button and Voice Command button do not work.
Whats weird is that i can go into the boot loader menu by holding Power + Camera + reset... And i can also do a hard reset by doing Power + soft left+soft right + reset... So The Camera + soft left + soft right must work ? So could this be a software problem? i have done a Hard reset, but they dont work still? Any Help would be appreciated thanks
check this first post in this thread. There is a cab file that fixes this.
http://forum.ppcgeeks.com/showthread.php?t=31852&highlight=Titan+Kitchen
I have the same problem with my Mogul, but I have yet to find a solution that works, and that cab didn't do anything unfortunately (Unless I did something wrong, you just have to install it right?). My buttons also work for hard reseting the device.
Unfortunately that PPCGeeks page only changes the registry settings for the same buttons as the settings|buttons program. It doesn't change the phone buttons or the windows or ok buttons.
Did you flash a new ROM or is this a stock phone?
I bought my mogul used off craigslist, and the buttons worked for a few days after I bought it, then they stopped working. Since then I have installed the new offical sprint rom and thats it.
jclardy said:
I bought my mogul used off craigslist, and the buttons worked for a few days after I bought it, then they stopped working. Since then I have installed the new offical sprint rom and thats it.
Click to expand...
Click to collapse
So they stopped working before the Sprint ROM update? That doesn't sound good. Since you don't have a warranty you could follow the path of flashing to DCD ROM since you have probably the latest Radio ROM already and see if the button come back.
The original poster described exactly what is happening to me. I haven't tried the solution linked above because I'm at work. Has anyone tried that and had it work?
Hi all,
I using SpbBackup all day for save automatically my cruise. After the save SpbBackup reboot the device.
I configured the hold press end button for désactivated the data connection.
After the save end reboot of SpbBackup the hold press is désactivated. I'm obliged to reconfigure the button. Other button work well.
Can you help me?
Thanks.
Anyone with the same issue?
The problem appears in a random way.
Well ... since 2 weeks ago, i have this problem. Any solution???
Thanks in advance!
pikarin said:
Well ... since 2 weeks ago, i have this problem. Any solution???
Thanks in advance!
Click to expand...
Click to collapse
Hi,
I desactivated the reboot after the backup, but i have the same issue.
The problem is random.
It's necessary that I test with another backup software to see.
You use a backup software?
I find the origin of my problem: the newest version of Slide2Unlock (S2U). Have you got installed it?
I installed this version because anytime I press the GPS Hardware button and it finish quickly my battery. This version desactive the hardware buttons when it locks the device, but ... I supossed that when I unlock the device, the hardware buttons are another time available.
Well, I uninstalled the newest version and I reinstall version 2.04 and... voilá!!!!
Perfect!
I hope that you find here you solution!
Hi,
For the last month I noticed that Left softkey (Phone softkey) is freezing.. Now this is becoming more often. The only solution I found is when it freezes to press windows start button at the top left corner and then the phone is working normaly again. At the moment I press left softkey and it freezes, I see that background for that button drops in (the animation works). Then, to un-freeze it, I press verry gently with stylus windows start button.. The rom upgrade didnt work, so I dont know if this is hardware or software bug ???
Any idea ??
dgdragon said:
Hi,
For the last month I noticed that Left softkey (Phone softkey) is freezing.. Now this is becoming more often. The only solution I found is when it freezes to press windows start button at the top left corner and then the phone is working normaly again. At the moment I press left softkey and it freezes, I see that background for that button drops in (the animation works). Then, to un-freeze it, I press verry gently with stylus windows start button.. The rom upgrade didnt work, so I dont know if this is hardware or software bug ???
Any idea ??
Click to expand...
Click to collapse
It sounds like a firmware issue, especially since you had attempted to upgrade the ROM version and failed to do so. Have you tried performing a hard reset? This will restore the phone back to default factory settings and should resolve this problem.
I would strongly advise you to first backup your data (Contacts, Emails, SMS, etc) using PIMBackup.
To perform a hard reset, please try the following:
(1) With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
(2) Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
(3) Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset.
Regards.
p.s. if you would like some detailed information on how to unlock your phone to upgrade to another ROM version, such as a custom ROM, then please carefully read the following guide.
Mastoid said:
It sounds like a firmware issue, especially since you had attempted to upgrade the ROM version and failed to do so.
Click to expand...
Click to collapse
Hi again,
Thanks for your replay. I succeded with ROM upgrade. The problem appeared while I was using previous ROM version (some clean WWE) and then I flashed to custom ROM few days ago thinking that I had a lot of programes instaled on previos ROM and if I install a clean ROM problem will dissapear.. Now I see I was wrong.. I dont realy get it.
I was following the guide from your post while I was upgrading the ROM I have now. And when I did, I did hard reset..
Good thing is that I found the temporary solution how to unbug it (by pressing start button) otherwise I would be verry pissed of as I dont have warranty
Did enyone experienced same problem ?
dgdragon said:
Hi again,
Thanks for your replay. I succeded with ROM upgrade. The problem appeared while I was using previous ROM version (some clean WWE) and then I flashed to custom ROM few days ago thinking that I had a lot of programes instaled on previos ROM and if I install a clean ROM problem will dissapear.. Now I see I was wrong.. I dont realy get it.
I was following the guide from your post while I was upgrading the ROM I have now. And when I did, I did hard reset..
Good thing is that I found the temporary solution how to unbug it (by pressing start button) otherwise I would be verry pissed of as I dont have warranty
Did enyone experienced same problem ?
Click to expand...
Click to collapse
Personally, I haven't ever experienced this problem, but it's good to know all is well now
Best Regards.
The issue is happening to me too.. not sure why..