here's a boggle for you gentles and ladymen, I'm using the black and blue rom, and, to my knowlegde, I've installed nothing which would cause this, but...whenever my trinity goes into stand-by mode, whether by timeout or through the power button it goes into standby....the problem being when it comes back on, no matter what I press to get it out of standby it dials the first contact in my address book....every damn time....without fail....anyone have any ideas, I love the black and blue rom and dont really want to flash again...unless I really have to of course.
Definately odd! I'm on Black & Blue: no probs.
Related
Perhaps someone has an explanation why my backlight doesnt light up again when a button is pressed?
From time to time, the backlight goes dark and even though I am pressing buttons, screen, power button, etc, the backlight doesnt come back on. I have to search for the backlight adjuster (in the dark) in order to switch the light back on.
I have wisbar advanced and SpbPocketPlus installed - might that effect this somehow??
Thanks for any advice!
i have exactly the same problem and don´t know a solution. ;-(
Wisbar Advance 2.6.0.1 is installed, SpbPocketPlus not.
I think it comes more often if i use the camera, but it is not reproduceable...
I've never had this problem before, I dont have wisbar installed.
You may be doing a press and hold function on your device. Quick press of the power turns it off, a long press turns off the backlight. the only way to turn it back on is to long press the power button.
also you have settings that turns the back light screen off, which may be affecting this.
This problem used to occur on the O2 XDA2i ALL THE TIME!
Just my 2 cents. Sorry, not very helpful, but defo a problem we've seen before. You hvae to go into settings to start the backlight back up.
Squuiid said:
This problem used to occur on the O2 XDA2i ALL THE TIME!
Just my 2 cents. Sorry, not very helpful, but defo a problem we've seen before. You hvae to go into settings to start the backlight back up.
Click to expand...
Click to collapse
It hasnt happened lately (actually ever I posted this thread strangely enough) but its quite embarrassing when you have to find your way through a dark screen.
I put a large symbol of the brightness adjuster in one corner (using SpbPocketPlus), so I only have to find that symbol rather then start --> settings --> etc..... its not a cure but it makes it easier switching it back on.
If anyone has a remedy for this problem, please share...
Not sure why this happens, but I fixed it using...
http://www.ppc-welt.info/community/showpost.php?p=728080&postcount=27
This app - run on your prophet, and all is back to normal. Keep a copy on your SD card...
--Tosh
didn't help
I tried and still use the neo backlight fix. But this fix is only for forcing via startup a longer measured time for the light to stay on.
I too have suffered with the problem of the backlight not coming on every now and again after starting up the prophet. I've had this problem on numerous roms too which is interesting. What more interesting is that even in the days of my owning a Blue Angel (Orange M2000, MDA) I STILL remember having this intermittent problem with the light not always coming on. Only way I fixed it was to simply soft reset the device. Whenever I did that and when I do it now, it stops it happening for week or so at least.
I still use the neo back light fix too as my phone has the quick light turn off problem without it. Neo certainly created a good fix no mistaking.
All the best
Nicholas
i had the same problem...just put the same value to the standby and backlight ...( both 3 mins on mine)...and never happened again....i think it helps...
I have a strange backlight & power-off problem on my Qtek S200:
When the backlight is switched on and I press the Power button shortly to switch it to sleep mode, the screen gets blank but the backlight does not go off.
So now I wait first when the backlight timer goes off before switching the device to sleep mode manually.
Another problem:
When the power settings is set to switch the device off automatically, it reboots when the timer goes off. So my solution is to disable the auto power-off feature.
How to fix this to the original behaviour ?
I tried the neo_backlight_fix and set the backlight timeout to the same value as the standby timeout, but with no avail.
My Qtek S200 has still the original old ROM (G4 model) and Windows Mobile 5.0:
ROM version info:
IPL: 2.10.001
SPL: 2.10.001
GSM: 02.07.20
OS: 2.10.7.25
Please help me to solve the problem.
Maybe I messed up a lot and the only solution is to install a newer ROM which is available since some time at qtek.nl.
Thanks in advance.
Hi all,
I upgraded to an O2 Exec a little over a week ago from a Blue Angel.
Initially I had a few concerns about it, but thankfully I found this forum, and have managed to get a number of enhancements, from increased storage and better radio (v1.09) to being able to turn on the flash light using a hardware button. My Exec is now running faster than my Blue Angel ever did, and hasn't frozen once. I've already become quite attached to it.
One thing that I think would be useful would be to have the unit turn on when the lid is opened, and off when it is closed. In the Power settings you can uncheck the box that turns off the device if it is not used for x mins, which has the effect that the screen will come on whenever the lid is opened. However, because the device is still running the battery still takes quite a hit even though the screen is turned off, and even when you lower the cpu speed.
Is it possible to turn the device on and off by opening and closing the lid?
Cheers
Rowan
Bump
Hi, I have mine set to come on and off when you open close the lid, and it's set exactly how you have said. Power settings, and stop the device going off. And Backlight settings, stop the backlight dimming, and lower the backlight when on battery mode.
There is no "off" mode like Nokia handsets, only Standby, which is what happens when the screen is closed. (I think).
jmdrizen said:
Hi, I have mine set to come on and off when you open close the lid, and it's set exactly how you have said. Power settings, and stop the device going off. And Backlight settings, stop the backlight dimming, and lower the backlight when on battery mode.
There is no "off" mode like Nokia handsets, only Standby, which is what happens when the screen is closed. (I think).
Click to expand...
Click to collapse
You're not really going into standby mode by closing the case, try switching on wifi or bluetooth and look at the flashing indicator LED, it will still be going whien the case is closed. Nowtap the power button to put the device into standby, no more flashing LED. The phone LED still flashes which is a good thing otherwise you wouldn't be able to recieve calls in standby.
shuflie said:
Nowtap the power button to put the device into standby, no more flashing LED. The phone LED still flashes which is a good thing otherwise you wouldn't be able to recieve calls in standby.
Click to expand...
Click to collapse
From what I know, the Universal has no real OFF mode, only standby, EVEN WHEN YOU PRESS THE POWER BUTTON. On mine, BT and WiFi still flashes even when I press the power button or just close the screen.
Pressing and holding the power button turns the backlight off, a quick press (or tap as I said before) makes it go to standby and should turn off everything but the phone part.
Okay well weve taken a really fun detour discussing the technicalities of standby and 'power off' but lets digress for a moment back to the original topic...
Rabangus, seems the best option you have is what you were doing. The hit to battery shouldnt be that large. I gave it a try not too long ago the way you and the other member had it set up again, and yes youll definitely have to charge it every night but it was doable. But I wasnt using wifi or bluetooth either. I am surprised that using Xscaler it still takes way to much battery. I assume thats what you are using to lower the CPU.
Oh well unfortuntely thats the way it is chief.
ok well during the day and everything its fine but now as I type this message and when I'm generally in landscape mode using the keyboard my hermes backlight has a life of its own it turns on and off randomly...
no its not power saving, I'm sim unlocked but I now run the 1.09 bootloader and latest HTC rom and I'm getting to wits end. sometimes it can be fine other times not.
some may think what is he on about but it is happening to me and I don't even think its a hardware fault either or at least I hope not as most of the time my backligt behaves! anhone got any bright ideas as to what could be causing the flicking?
I have had a problem where the keyboard, when slid out, does not light up. Is this what you mean?
If so, I went into the control panel, switched it off in the settings and then closed it all down. I then went back and enabled it, and did a soft reset when it had all calmed down. No problems since
HTH
I get a similar problem, when I have read a message and switch to landscape mode and start typing, the backlight turns off and as i continue to type it will switch itself back on.
its a pain in the arse and is one of the bugs im hoping to get rid of on a rom update.
Imp
The keyboard has a light sensor. It will only light up in dark conditions. Maybe yours is playing up, or the light conditions that your using your phone in may be the cause.
I turn my sensor off so the backlight is always on, Settings---->Buttons----->Backlight
S.K.
Its the screen backlight that goes off, not the keyboard lights.
Imp
How do you set the screen to go totally black when not in use?
At the battery management (in Settings) area, find the one that will turn off backlight when not used for X seconds/minutes.
I have it set to 10 seconds but it never goes completely black.
Press the power button briefly. This will put the device in sleep mode and give you a totally black screen.
Have you got a thing about black, perchance?
WB
so I will still get texts and calls?
Of course... Lamp will flash orange if you have received SMS or missed call(s)...
Hello,
I have a Wizard g4 with hard SPL and this weekend it decided to go crazy. Here is the problem:
- When I turn it on, the screen goes white, blue and orange LEDs are lit and the device vibrates non stop. The camera white led is also lit.
- The only way to turn it off again is removing the battery. reset is useless.
- I try to put it on bootloader mode using the camera+reset and nothing happens
- Trying to turn it on with camera pressed also doesn't work
- Trying to turn it on with voice+network pressed doesn't work either
- When I connect it to charger or USB, it automatically does de same (white screen, etc) described above
I've been using Hornet win 6.1 ROM for some time and was very happy with it.
Is there any hope or am I effed?
Seriously? Nothing?
Diamened said:
Seriously? Nothing?
Click to expand...
Click to collapse
You don't say anything about doing a hardreset. Did you try it?