hi there i have jsut upgraded my xda and stuck into the screen wich says tap here to set up your device :S what should i do?
is the screen not working?
moixalakix said:
hi there i have jsut upgraded my xda and stuck into the screen wich says tap here to set up your device :S what should i do?
is the screen not working?
Click to expand...
Click to collapse
tap the screen and follow instruction that write on screen you 'll finish set up. or you can softreset and it continue hang up please format DOC for your UNI.
Related
hey this my first post so plz be nice!!
i got the t mobile ameo and i tried unlocking it i followed the instructions to the letter.
but something went wrong and if possiable how can i reset it back to origional settings (t mobile) or even unlock it to what i wanted so my 3 simcard can go in there. or orange.
plz help
gareth
garethmob said:
hey this my first post so plz be nice!!
i got the t mobile ameo and i tried unlocking it i followed the instructions to the letter.
but something went wrong and if possiable how can i reset it back to origional settings (t mobile) or even unlock it to what i wanted so my 3 simcard can go in there. or orange.
plz help
gareth
Click to expand...
Click to collapse
Hi, and welcome to the forum. (See! I was nice!)
Telling us that 'something went wrong' isn't really enough for us to go on.
You need to describe exactly what happens to your Ameo when you power it up, so we can give the correct advice. What do you see on the screen?
sorry lol
when i do the hard reset it does the usb boot screen but goes to a gray screen that asks me to format microdrive and then flash it. i think the op system been wipped but i cant get it to the rainbow usb boot screen for active sync to fix it
You can get it into bootloader mode by holding down the comm manager and camera buttons, then soft resetting.
From there you can re-install WM6. If you didn't succeed in unlocking the unit, you'll need to use the T-Mo compatible version of WM6 which you can find here - http://uploaded.to/?id=wbbw2u
I have a quick question regarding my MDA Vario II. I've downloaded the recently discovered (so I am led to believe!) official WM6 TMobile UK Rom and wish to upgrade my device. The thing is, when I confirm the ROM update, it seems to turn my Vario II screen off, ActiveSync loses its connection and the installer gives me a [260] Connection error.
ERROR [260] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
I've reset the device and the computer over and over; I've even tried the process on a second machine but I still get these same symptoms.
How can I get my MDA Vario II to successfully take the ROM update?
Thanks in advance
Hi i had the same problem with the t-mobile update and the way i installed it was to manually enter the bootloader so you get the tri coloured screen, then right click on the rom install exe and click extract to RUU_Hermes_TMO_UK_3.60.110.2_6275_1.50.00.00_108_Test(or whatever the name of the rom is that you want to install), you will need winrar installed to do that, not sure if winzip supports this feature too as i have always used winrar.
Any way once this is extracted you can double click on the folder and then right click on the ruuinside.exe and click extract to ruu_inside. Once this is done double click the ru_inside folder and double click on the ROMUpdateUtility and click that you have done everything it says you have to do (even though you havent got an active sync connection etc) and if it goes well, Like mine did it will install
Let me know if it did , good luck
P.S. I am using vista and if i do it this way i can install all the roms
off topic but do you look like jolie or do you wish you did
scousemartin said:
Hi i had the same problem with the t-mobile update and the way i installed it was to manually enter the bootloader so you get the tri coloured screen, then right click on the rom install exe and click extract to RUU_Hermes_TMO_UK_3.60.110.2_6275_1.50.00.00_108_Test(or whatever the name of the rom is that you want to install), you will need winrar installed to do that, not sure if winzip supports this feature too as i have always used winrar.
Any way once this is extracted you can double click on the folder and then right click on the ruuinside.exe and click extract to ruu_inside. Once this is done double click the ru_inside folder and double click on the ROMUpdateUtility and click that you have done everything it says you have to do (even though you havent got an active sync connection etc) and if it goes well, Like mine did it will install
Let me know if it did , good luck
P.S. I am using vista and if i do it this way i can install all the roms
Click to expand...
Click to collapse
Thank you for this but I'm a little worried about doing all this as I've never flashed before, (although I'm experiened with technology). Out of curiosity, how can I manually enter the bootloader?
Edit: Never mind; Side OK, Power and Soft Reset
It's going over now I hope it works
This will ERASE the whole phone so make sure you have performed a sync before doing this. Press the left top button and the right top button and the camera button all together and reset the device using the stylus. You need long fingers to accomplish it lol. Just hold all the buttons in till you see the tri colour screen. If you dont see the tri colour screen and just see the normal boot screen then try again, you need to have them all pressed at the same time when you reset. Its fiddly to do on your own or you get someone else to press the stylus in while you press the buttons in.
Also you dont need to press the buttons at the exact time you reset. You can just press the buttons in any order just as long as they are all pressed when you reset, hope that is clear enough. Also if it is a t-mobile device then it will update no problem , if it is another providers rom that is on there it wont even try to update and you will get a device id error
scousemartin said:
This will ERASE the whole phone so make sure you have performed a sync before doing this. Press the left top button and the right top button and the camera button all together and reset the device using the stylus. You need long fingers to accomplish it lol. Just hold all the buttons in till you see the tri colour screen. If you dont see the tri colour screen and just see the normal boot screen then try again, you need to have them all pressed at the same time when you reset. Its fiddly to do on your own or you get someone else to press the stylus in while you press the buttons in.
Also you dont need to press the buttons at the exact time you reset. You can just press the buttons in any order just as long as they are all pressed when you reset, hope that is clear enough. Also if it is a t-mobile device then it will update no problem , if it is another providers rom that is on there it wont even try to update and you will get a device id error
Click to expand...
Click to collapse
Dude you ****ing rock Thanks for the advice on manual bootloader mode and everything. My phone is now running WM6 - it feels so much slicker, phone, Web n Walk and everythng works out of the box (yep I let it do customisation :\ lol) and its just great!!!!
Next stop Windows Live Messenger cab file... I'm sure its here somewhere? You know of one?
Thanks again
here is a windows installer for windows live
http://rapidshare.com/files/66632856/Install_WLM.exe
i wanted to install HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R rom. but i get a problem of compatibility. after that i enter intro the artemis uspl folder in romupdateutility and i completed the process. after that my phone is not charging, not enter bootloader, do nothing. please help me.
kozminel said:
i wanted to install HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R rom. but i get a problem of compatibility. after that i enter intro the artemis uspl folder in romupdateutility and i completed the process. after that my phone is not charging, not enter bootloader, do nothing. please help me.
Click to expand...
Click to collapse
try to take out battery for a day...after that try bootloader and safe wm5 official rom installation from storage card....read forum 4 details
cheers
if your phone dead
hello
you can press butom of in left of phone for suond tag press it with trun boutom . main first press sound tag botoum and second butoum of turn on maen togther and then you can falash agin.
[email protected]
sirwana said:
hello
you can press butom of in left of phone for suond tag press it with trun boutom . main first press sound tag botoum and second butoum of turn on maen togther and then you can falash agin.
[email protected]
Click to expand...
Click to collapse
hello .. could you tell me more exactly what to do? i do not understand what button i should press. tanks a lot.
zikizile said:
try to take out battery for a day...after that try bootloader and safe wm5 official rom installation from storage card....read forum 4 details
cheers
Click to expand...
Click to collapse
i will try this. tanks
zikizile said:
try to take out battery for a day...after that try bootloader and safe wm5 official rom installation from storage card....read forum 4 details
cheers
Click to expand...
Click to collapse
zikizile i tried what you said but nothing..do you thing the battery is the problem? or my phone is locked by IMEI? please someone help me..
Here is the process with buttons.
Press the left phone upside button for voice record,or voice command, that where the volume button is, and with that button pushed, press the switch on button and you will get that tri-color screen, and there you are. From there you can reflash your phone.
I installed a cooked rom and well my screen wont go past the align screen even when i follow the screen directions and i even installed the original software and the same thing..... somebody please help
Phaze01 said:
I installed a cooked rom and well my screen wont go past the align screen even when i follow the screen directions and i even installed the original software and the same thing..... somebody please help
Click to expand...
Click to collapse
Have you damaged your phone's screen?
Hi
drew1ind said:
Hi
Click to expand...
Click to collapse
Crap...
I pressed enter without looking :L
Real post:
Hi, I made a rom with android kitchen.
It boots, but when I try to go into setup wizard (Button you need to press on the screen),
It says it stopped working!
Help?
drew1ind said:
Crap...
I pressed enter without looking :L
Real post:
Hi, I made a rom with android kitchen.
It boots, but when I try to go into setup wizard (Button you need to press on the screen),
It says it stopped working!
Help?
Click to expand...
Click to collapse
Okay...
Flashing gapps fixed it!