ihave imate sp3i . turn on open three color screen and write
IPL 1.00
SPL 2.5.0105
TYPHOON
i can manual boot menu and load imate rom but after restart same screen.
sd card loader şs open and write not allowed
i have same problem
if one can help
Metallica45 said:
i have same problem
if one can help
Click to expand...
Click to collapse
Wright me to PM, and if you can soldeing and can made some cable i can help you.
P.S. For all Who unlock his phone via Imei-check, please send me your used "Key file"...
Related
I was updating my new i-mate SP3 (typhoon) to the latest i-mate ROM 2.4.33.11 which completed successfully but now every time I turn on the phone it goes directly to the bootloader tri-color screen. I tried several times to update the ROM again but it does'nt help. It shows the proccess completed successfully but the phone is still stuck in bootloader mode.
In the bootloader screen it shows the following
IPL 1.00
SPL 2.5.0102
I even tried to flash the ROM through an image of Orange4114_ALL_SPL1010091 on a miniSD card but it gives an error message
"Not allowed update!"
Please help me figure out how to get my phone working again.
Same PROBLEM here HELP..!
Exactly the same problem if anybody can help ..please do.
spl
hi
same problem my sp3
SPL
Same problem on spv c500 stuck in bootloader but with 2.05.0130 SPL
sp3i stuck
Hi all,
I have the same problem, but I didn't try the mini-sd boot.
surfturtle, will you kindly send me the way?
Thanks
Hi guys...
I don't have the Typhoon and don't know if this will work for you, but this is at least how we fix this problem on the Hermes:
Enter into bootloader using mtty.exe and run the command "set 14 0" and "task 8". Phone will reboot and start OS.
If it doesn't work, then try the SD flash method mentioned by surfturtle. Keep in mind that if your device is not superCID the image file should match the CID of your phone (must be an original shipped update from your vendor). This method consist on:
1) extract the rom image from the rom upgrade exe (winrar or cabextract can be used for that) and you'll find a .nbf file.
2) Rename it to TYPHIMG.nbf
3) Format your SD card in FAT32
4) Put TYPHIMG.nbf on the root folder of your SD card
5) put sd card on the phone, and enter into bootloader
6) confirm flashing on screen, and wait until the process is finished (do not reset it, will take about 30min).
Check the hermes wiki if you need more information on any of this.
Good luck!
sp3i stuck
thanks pof,
but where would I get mtty.exe and where will I see "set 14 0" & "task 8"
thanks again.
Re: sp3i stuck
@Tall_Man: See the hermes wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
I-mate ROM
Hi, I did the upgrade through the PC but the device info still shows the old ROM: 2.1.33.13 No error messages and the phone keeps hanging on me.
Is this version of ROM the Arabic one? If not, can someone post or point to where I can download the arabic version? I did not find it on the I-mate website.
Thanks in advance,
I-mate SP3 (?rom 2.1.33.13)
ok i think iv killed my m600
i flashed it with the older imate rom the 1.0.9 version
it installed 100% and rebooted and from ther it was stuck on the imate screen for like 10 minutes and i see the following text in red on the top left corner
---------------------
IPL 2.10.0001
SPL 2.15.0001
GSM 01.14.20
OS 1.0.9.25
-------------------------
i tried removing the battery and restarting the fone. still the same thing. can someone please please please help me with this?
what do i do?
im sure orange wont help me out since i flashed it with a non-orange rom.
never mind fixed itby goin into the bootloader
funky_Saggi said:
never mind fixed itby goin into the bootloader
Click to expand...
Click to collapse
hi there i seem to have the same problem as you with the boot screen. top left corner say's
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 1.0.13.21
can you please tell me how you fixed yours please it would be a great help
What you could do is flash it with an newer rom
Hold camera button AND reset (be asure that it hold it while resetting)
Then... you are in you bootloader... connect the PDA with your PC..it will recognized it!
Then run the romupdate ;-)
Hi thanks for trying to help me i got my phone in to the 3 colour screen but my computer does not pic it up at all. is there another way to save my M600
crossy4life said:
Hi thanks for trying to help me i got my phone in to the 3 colour screen but my computer does not pic it up at all. is there another way to save my M600
Click to expand...
Click to collapse
Aren't you getting "USB" written in the bottom left corner of the 3 colour screen when you connect it to USB?
Yes i get the USB come up at the bottom of the screen my computer does not do anything. can you tell me which ROM i will need as the ones i have to run the ROM update but it comes back saying connect to ActiveSync which i can not do is there a way round this?
Final got my SPV M600 Working with the ROM from the download area thanks for the help anyway
cheers
just change the usb port to another one and start rom it should pick it up
Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
you ARE trying to RUU with a HERALD ruu, no?
Also, if you have a wing or a dopod, you must ruu with the tmobile or dopod variation of the RUU, respectively.
i have HTC herald (not wing or etc) black skin with grey buttons.
i tryed to flash with official wm6 ftom htc.com, and the official wm5, from the net (i dont know the source: RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe)
but, the error is the same: 300, invalid update tool.
my friend sais: my bootloader damaged.
i must get an SD Dump from a HTC herald, same as this device, and then i have a glimmer of hope..
or service repair:|
tmo ruu didnot worked also..
regards
pulyka
try mtty
set 16 0
or set 14 0, I forget which, try both
then do
task 8
Olipro said:
try mtty
set 16 0
or set 14 0, I forget which, try both
then do
task 8
Click to expand...
Click to collapse
I also got one with error 300
I try set 16 0 and set 14 0 both
then task 8,give me
Invalid command : task 8
For a help screen, use command ? or h
....how?
pulyka said:
Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
Click to expand...
Click to collapse
Help me,I like you
hponline said:
Help me,I like you
Click to expand...
Click to collapse
Hypercore's ROM kitchens has the Herald RUU upgrader... I wonder if that would work...
pulyka said:
Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
Click to expand...
Click to collapse
I also have the same probem.. after using HERALD-USPL-beta3
beucase I want to change langauge GERMANY to ENGLISH.
PHONE IS HTC HERA100
and having same problem as ABOVE.
NEED SOLUTION.. any comment is will be appreciated
Br.
What is your IPL and SPL in bootloader?
Where did you buy your herald?
oddball1 said:
What is your IPL and SPL in bootloader?
Where did you buy your herald?
Click to expand...
Click to collapse
Its not mine phone.. Its from my Customer he bring phone to me for change language.
before I don't checked IPL / SPL
but after using HERALD-USPL-beta3
NOW IPL IS 1.08.0001 and SPL IS 1.08.0001 is also same.
waiting for the solution..
Br.
DrMobile said:
Its not mine phone.. Its from my Customer he bring phone to me for change language.
before I don't checked IPL / SPL
but after using HERALD-USPL-beta3
NOW IPL IS 1.08.0001 and SPL IS 1.08.0001 is also same.
waiting for the solution..
Br.
Click to expand...
Click to collapse
hello!
Have you ever solved your problem? If yes maybe you can share!!!!!
Or any solution for this yet? Please I need help.
Br
keke
Hi guys,
Here's what I did (something very stupid) and what happened :
I have a NIKI100 which has simlock and HAD a vodafone dutch splash screen with original rom and radio.
I followed the instructions and managed to flash a new rom with
RUU_Nike_HTC_NLD_2.09.404.1_Radio_NikeMR_1.65.28.2 5_signed_Ship.exe
I still had SIMlock so I started over the procedure with Niki-SuperCID
Here I made the STUPID mistake to hardspl while I FORGOT to SSPL first!
so this is what happened next: rom update halted at 95% I got error and began
recovery. (1) Ever after this I get ERROR[262] whatever I try and update halts at 0%.
I tried to flash the ROM again but then I get error [294]:INVALID VENDER ID
everytime I reset the phone I get red-green-blue screen :
NIKI100
SPL-1.22.0000
CPLD-4
Upgrade ROM code error
please try again
I tried hardspl but I get (1)
Iknow I was stupid to forget SSPL first, but how do I get my phone back to work again ? any help would be very appreciated !!
Upgrade rom error code
help help same poblem.....
Not sure where I read it here, but you will need mtty. In there (for me it took several tries to get it to connect) type "set 16 0" - then "task 8".
I did! I did push that button!
I did the MTTY with set 0 16 then task 8 and it worked!!!
Thanks your highness!!
Now I can try the RUU again
DarkSayaJin said:
I did the MTTY with set 0 16 then task 8 and it worked!!!
Thanks your highness!!
Now I can try the RUU again
Click to expand...
Click to collapse
hi .. what exactly did you do ? i have the exact phone, exact error, exact program, downloaded from the attachement, and when i connect with mtty i can`t type in the console, only paste, and it doesn`t do anything for me. can you please explain what exactly did you do ? thanks
nevermind ......
don`t mind my post, i`m sorry i`m blind .... i was connecton thru com ports, i didn`t notice the usb button ... jeez i`m stupid, anyway connected thru usb , typed the commands and it rebooted with the windows 6.1 .. works perfectly now. thanks for your post and mtty attachment, very helpfull
DarkSayaJin said:
I did the MTTY with set 0 16 then task 8 and it worked!!!
Thanks your highness!!
Now I can try the RUU again
Click to expand...
Click to collapse
Same prob here...
I can't understand what u guys did... I don't see any USB button and don't know where to type...
help plz?!
Niki200
T-mobile HU
Original Rom
http://rapidshare.com/files/272691817/NikiT07.rar.html
See my attach plz.
Thkx.
P.S. "d ual Tou ch" is my pda...
i guess i have NIKI 100 and not 200...
I have got hold of a T-Mobile Ameo that's gone wrong whilst upgrading/unlocking, I believe they were using the Olipro way (which I've successfully done fine myself in the past) and it's now stuck in the multi colour bootloader screen which displays:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.10.RP00
And although it shows USB when plugging it in to a computer it won't connect to ActiveSync so I can't get to the stage where I can re-flash it.
I have tried the hard reset by holding down the volume and pressing the reset hole, and I get to the prompt:
Press ACTION to restore factory default
Press Camera Key to exit
I then press the little nipple button down and it displays:
Restore default complete
Press Power Key to boot
Press CommManager Key to format micro drive
I press the Power Key and I'm back in the multi colour boot loader back where I started, and I canot connect to ActiveSync to reflash.
Any help to turn this paper weight back into a useful device would be appreciated...
exactly the same problem here.
any guru with a solution ?
seckt0r said:
exactly the same problem here.
any guru with a solution ?
Click to expand...
Click to collapse
Hi seckt0r,
have you tried reflashing the original rom for your device while connected to your computer in bootloader? ftp://ftp.xda-developers.com/Athena/Shipped_Complete_Updates/
another idea would be to try sd card flashing,(see the wiki) but you would need to extract an image from the flash utility.
One thing to note is you couldn't flash any of the newer roms as you are probably not unlocked
lakeman,
Thanks for the tips and sorry for the late reply.
I did figured out how to make it work again, and played a lot with the device
Already delivered back to the 'client'...
Active Sync issue is solved !!!
Active Sync 4.5 had changed the way it connects from USB Serial Sync Mode to RNDIS Sync Mode. So it can cause problems in connecting with PPC. Try install on your PPC the "ActiveSyncMode.sa.CAB" that you can easily find on Google & run it. Hope this might help.
same problem here i tried to upgrade with orignal rom tmobile uk but its show invalid vensor what can i do plz help thnx
got your msg ahmerp but I don't use MSN
have you tried some of the other shipped roms
if that fils you could try cmone s mtty solution to rswrite the vendor id
seckt0r said:
lakeman,
Thanks for the tips and sorry for the late reply.
I did figured out how to make it work again, and played a lot with the device
Already delivered back to the 'client'...
Click to expand...
Click to collapse
Please help me to sort out my ameo problem some one flashed with with wrong rom now phone shows only volume icons and whenever i try to flash with tuk roms it always give me error invalid model id e.g
Check post 33 on this thread http://forum.xda-developers.com/showthread.php?t=387454&page=4. You MUST use Windows XP with SP2 optionaly SP3 for this to work. If you need mac file for SPL1.2 send me email.
ameo stuck on bootloader after trying to unlock with athena unlocker
my tmobile uk was on rom 1.12. i tried to unlock and it went faulty on step 1. now it boots only in bootloader mode tri colour screen.
any tmobile rom gives invalid vender id error 294.
anyone can provide me with the original 1.12 tmobile uk wm5 rom?? also anyone cna help me online to change vender id using rswrite or pdocwrite.
Ayyub
hafizayyub said:
my tmobile uk was on rom 1.12. i tried to unlock and it went faulty on step 1. now it boots only in bootloader mode tri colour screen.
any tmobile rom gives invalid vender id error 294.
anyone can provide me with the original 1.12 tmobile uk wm5 rom?? also anyone cna help me online to change vender id using rswrite or pdocwrite.
Ayyub
Click to expand...
Click to collapse
Can you post what is written on the bootloader screen?This will help define what rom you need to flash.
thanks lakeman
my bootloader tri color screen shows
I hv a new htc Athena (ameo t mobile uk locked).
I was trying Athena unlocker by olipro. I hv used this on a number of occasions and no problems.
With the present one it was on rom 1.12 tmobile uk and while doing Athena unlocker it crashed on first step.
In bootloader mode it shows
Athe100
Ipl-v1.00
Athe100
Spl-v1.10. RP00
It keeps giving invalid vendor id error 294 when I try to flash tmobile original rom
I have read olipro message who say that I can only repair this via pdocwrite. Apparently it’s the spl that’s corrupt so I need to repair this.
I will be very happy if u can help me with a step by step guide to repair the spl using pdocwrite or rswrite to change vender id.
I am using windows xp or windows 7 and I hv tried mtty and I can successfully connect to Athena and do info 2
It shows level=ff ie it is still locked cid.
Wdata also seems to work but even after password says pass I do not really know how to change the device id or vender id
Device id shows HTCS Þ?ÒtHTCE
I am told y olipro that this device id or spl can only be repaired via pdocwrite.
How can I do it..
Pls help me u can email me on [email protected] or hotmail.com and can add me so u can please provide me with a step by step guide repair my athena ameo
Ayyub