Hi,
I am using a mini & it shows wrong spelling of the operator name i.e. GrameemPhone instead of GrameenPhone.
Would anyone be kind enough to give me a solution? I know there are lots of gurus out there ...
Cheers...
using a registry editor (ie PHM regedit) add values under:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\RIL\OperatorNames]
Examples of values:
"20408"="NL KPN"
"20620"="BASE"
"20810"="SFR"
The numbers before the "=" are the network identifier (google to find yours.. In the part after the "=" you can put anything you like (google a bit for that) which will be showed when youre on thaty specific network.
My gues is that a good line for you would be:
"47001"="GrameenPhone"
(470 = countrycode bangladesh, 01 =operator code within county)
Wrong Operator Name & some more queries
thanx mate ... worked like a miracle ...
i have some more ques.
1. sometimes when soft reset my mini stucks on the splash screen ... i need to do 3/4 times soft reset to switch on the device. fyi, i am usin spb pocketplus, pocketzenphone & phonedialerextension (cproghook, found in this forum) at startup. any clues?
2. since i don't want o2 active but only the batteryinfo.dll file, where can i get that?
3. i like the mini phonedialer a lot & have added vibration to it usin reg tweaks. where can i get some good skins for that? last time i tried, a skin destroyed my smartdialer & i had to reinstall from original cab.
again thanx for ur help ...
cheers...
hi,
i just got myself a TyTN, before that i had qtek 9100 and i use to use this tweak:
By just adding following keys to the registry will get you a nice 'wireless' today item that show Network name/status,
WiFi name/status as well as Bluetooth status. Confirmed to work on AKU2 ROMs
[HKLM\Software\Microsoft\Today\Items\"Wireless"]
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
now i tried it on my TyTN and it doesnt work...each time after making the changes to the reg. when i softreset the .dll file gets missing in the reg. ? i dont understand why it shouldnt work as both the devices use wm5 ? could some please help me with this?
thanks,
i||uSi0n^
i||uSi0n^ said:
hi,
i just got myself a TyTN, before that i had qtek 9100 and i use to use this tweak:
By just adding following keys to the registry will get you a nice 'wireless' today item that show Network name/status,
WiFi name/status as well as Bluetooth status. Confirmed to work on AKU2 ROMs
[HKLM\Software\Microsoft\Today\Items\"Wireless"]
"DLL"="netui.dll"
"Order"=dword:00000000
"Enabled"=dword:00000001
"Type"=dword:00000004
now i tried it on my TyTN and it doesnt work...each time after making the changes to the reg. when i softreset the .dll file gets missing in the reg. ? i dont understand why it shouldnt work as both the devices use wm5 ? could some please help me with this?
thanks,
i||uSi0n^
Click to expand...
Click to collapse
Try taking off the quotes on netui.dll and adding the windows directory in front \windows\netui.dll
String value Name=DLL
String Value Data=\windows\netui.dll
Seems to work for me
I also have dword key for FLags and OPtions, but they are set to 0
I've done this on my TyTN and it works fine. I think the key is to actually close the registry editor program (not just hit the X to minimize it) before the soft reset to ensure that all of the changes are saved to the registry.
hope this helps.
hi thnx for the prompt replies, but none of that helped...from the start i never used the quotes, im using PHM Registry Editor, and when i click on "ok" it asks me to save changes or not so im sure the changes are saved i have even verified it again by opening the prog. but when i softreset the dll key just disappears...i tried adding /window/ in front of netui.dll also...btw im using 1.18.255.3 english rom...
EDIT:
ok so after playing arround a little i have come to the conclusion that the reason why the dll key is not working is coz the .dll does not exist? i have looked a little into /windows/ folder and i see a file named "netmui.dll.0409.mui" but nothing like "netui.dll"...i even did a search nothing comes up...so someone could see and tell where must this dll file is located i could verify if it really there or not...
Thanks,
i||uSi0n^
I recently discovered this site and decided to upgrade my t-mobile wing... I chose the touch-it 2.3 rom that TylerC put in his upgrading kit... The phone seems to operate fine with the exception of when I'm using my bluetooth headset. The headset works however I'm no longer able to simply press the button and say who i wanna call, like the voice dial is messed up. Now before I posted this I searched the forums high and low for a solution and the only thing i could find I thought would save me but it didn't...
Here's what I found...
mrmikemcguire said:
Ok so I was having the same issues. My bluethooth was not being initiated by the button on the earbud. This was from another thread, I did it and it works fine now. Hope it helps........
Originally Posted by nextpimp
My Contribution....Since people dont want to find it out their own.... Voice Speed dial Over Bluetooth ...
1 Use registry editor to edit the following entries on your Wing:
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A udioGateway\, Modify Value data: OEMAGEX.dll to BTAGExtModule.dll
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: LaunchAPEnable, Value Data: 1
Under: \HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\, Add DWord Value: VoiceCmdEnable",Value Data: 0
2. Wait about 30 sec, then soft-reset
Itje ... Awesome Rom... All I gotta do now is unmap Voice Command from the hold funtion on button five.... Its not listening to me in the settings so gotta go to the reg... Help would be appreciated as the registry really isnt my strong point.
Click to expand...
Click to collapse
I tried that and nothing happened so if anyone knows how to solve this issue I would greatly appreciate the help..
Thanks,
Greg
try to "power cicle" -- hold power button for 3sec and select "yes"
of course after you made the changings....
use totalcommander or else to edit
tried that and still no success... anyone else??
I have had the phone since jan this year and applied all the updates from HTC with no problems at all.
However I since had to do a master reset and when I now apply the slider update from HTC I loose video calling from the phone and also the video call icon has been overwritten with call history.
Anyone had any similar experience?
A big thankyou to all who post.....had a lot of good info from this site for a great phone.
Hi HD Owner, I had exactly the same problem, i'm not quite sure what software I installed that caused it, but it remained even after a hard reset?
What I did in the end was installed the new updated ROM from the HTC website and it all works fine again
With a registry editor go to
HKEY_LOCAL_MACHINE / Security / Phone / Skin
and set the string "Enabled" from 0 to 1
97catalunya said:
Hi HD Owner, I had exactly the same problem, i'm not quite sure what software I installed that caused it, but it remained even after a hard reset?
What I did in the end was installed the new updated ROM from the HTC website and it all works fine again
Click to expand...
Click to collapse
Hi There 97catalunya...mine was fine after the reset but it would not allow me to apply the slider patch without losing video calling again.
Also I have tried to update the rom but I am on Orange and this will not allow me too....I have informed Orange and they said technical are onto it but I won`t hold my breath!!
dramsenik said:
With a registry editor go to
HKEY_LOCAL_MACHINE / Security / Phone / Skin
and set the string "Enabled" from 0 to 1
Click to expand...
Click to collapse
HI Dramsenik...so what exactly does this do?
Hello Together,
here's solution on how to get Blackberry Connect running on Topaz:
Instructions:
------------
- Make sure you have uninstalled blackberry connect before doing the following.
- Attached you will find a small zipped executable (EnableBBCTopaz.exe). Unzip it and copy it over to the \windows\ folder of your device.
- Open a registry editor and navigate to HKLM\init
Create a new string with the name "Launch130" and a value of "EnableBBCTopaz.exe" (without the quotes of course)
If Launch130 already exists, choose a number higher than, it doesn't really matter, just make sure it is higher than the other entries so it get started after everything else.
This makes sure the exe ist started after every softreset.
- Make a softreset, or execute the EnableBBCTopaz.exe manually.
- The program changes your model-id from "HTC-Topaz" to "HTC-Raphael" in memory
- Install Blackberry Connect like you usually do (My tests where successfull with version 4.0.0.104, 4.0.0.106 didn't work for me -- just hung up after a restart)
- After installation and the auto-reset through BBC open the BBC settings and go to the Info-Tab. Under device-name there should now be HTC-Raphael.
Click to expand...
Click to collapse
The solution is in fact the one from Rhodium forum, the respect goes to them, in particular to c0rnholio. The instructions are also copied from their thread. I just changed the program to fit to Topaz.
hi gnick.
Thanks a lot for providing a solution for this issue, but I cannot get it working...
The Client keeps stating: "PIN Pending". When I try to register the account the data tunnel gets established for a second but then it gets disconnected again.
The SIM is working fine in a Blackberry.
I already tried to reinstall the BB Client several times, but I always got the same results.
The device-ID is set to HTC-Raphael, so that shouldn't cause any issues.
Additionally I tried to kill the bbmain.exe and suspended the log and security services and reenabled them after a few seconds, but still no success.
If you have any further hints on what to try, pls. let me know...
Thanks in advance,
TheOmen666
Which blackberry client version do you have?
TheOmen666 said:
hi gnick.
Thanks a lot for providing a solution for this issue, but I cannot get it working...
The Client keeps stating: "PIN Pending". When I try to register the account the data tunnel gets established for a second but then it gets disconnected again.
The SIM is working fine in a Blackberry.
I already tried to reinstall the BB Client several times, but I always got the same results.
The device-ID is set to HTC-Raphael, so that shouldn't cause any issues.
Additionally I tried to kill the bbmain.exe and suspended the log and security services and reenabled them after a few seconds, but still no success.
If you have any further hints on what to try, pls. let me know...
Thanks in advance,
TheOmen666
Click to expand...
Click to collapse
Hi again,
I tried with versions .106 and .104.
Same behaviour with both versions ;(
TheOmen666
Hmm, hard to tell, really.
Which provider do you have? Your provider needs to support HTC Raphael.
Mine (Vodafone Germany) does support HTC Raphael (Touch Pro).
gnick said:
Hmm, hard to tell, really.
Which provider do you have? Your provider needs to support HTC Raphael.
Mine (Vodafone Germany) does support HTC Raphael (Touch Pro).
Click to expand...
Click to collapse
Thanks for the tip, but I too cannot get it to work. It did work in my HTC Diamond (that's Diamond "1", not "2"). I wonder - can you change the programme to suit the Diamond 1 instead please? I mean Diamond 1 instead of HTC Raphael. I wonder if this will make a difference.
By the way, does anyone know if RIM will bring out any software to make this all work?
Hi mitsi, did it work at the end?
mitsi said:
Thanks for the tip, but I too cannot get it to work. It did work in my HTC Diamond (that's Diamond "1", not "2"). I wonder - can you change the programme to suit the Diamond 1 instead please? I mean Diamond 1 instead of HTC Raphael. I wonder if this will make a difference.
By the way, does anyone know if RIM will bring out any software to make this all work?
Click to expand...
Click to collapse
gnick said:
Hi mitsi, did it work at the end?
Click to expand...
Click to collapse
Hi Gnick, partly. I got it to work with stopping the Blackberry Service and then activating the programme (your one) after a soft reset. However, after every soft reset, I will need to do the same process.
Open MemMaid
Stop Blackberry Service
Open File Explorer
Start your programme
Open File Explorer
Start BlackberryMain.exe
Close File Explorer
Enjoy emails.
This is too much like hard work, so I think I will be either selling my Diamond 2 and going back to my Diamond 1 or keeping both, using the Diamond 1 and waiting for a better fix to become available by subscribing to this thread (and others) and hoping that decent clever chaps like yourself will come up with a fix!!!
By the way, one other item that needs fixing is that I am only able to have my work email on this. I do not have the Blackberry Secure Internet (the one to send service packs and add other email accounts). So I can't get my home email..
There is one other alternative by the way:
This is to write a Mortscript programme that does this tedious process automatically.... I have made enquiries to someone I know....
@gnick
Thats a good point, asking for the Provider...
Well I checked the websites of T-Mobile Germany and the last device I found, where you could officially download the bbconnect client was the "Kaiser" (Mda Vario III, HTC TyTN II, AT&T Tilt ).
This means, that I either have to get rid of my Topaz or convince you to make a special version where the model-id is set to the one of the Kaiser (I only found "KAIS120") but I am absolutely unsure wether this is the korrekt model id used for the bbconnect client.
Regards,
TheOmen666
Hi All,
I finally got it working.
As I am running WM 6.5 on my device, I had to change the AKU String in the Registry HKLM\System\Versions to ".1.6.3".
After changing this, I got a PIN and could do the Enterprise Activation with my account.
Thanks a lot to all for the effort to get this working on the Topaz.
Cheers,
TheOmen666
Hi All,
I too got it working. I followed the tips on this thread and on the one by cOrnholio with the following notes:
AKU set to .1.6.1
BBC version 104 worked (106 didn't) just as you said gnick .
Blackberry still crashes Manila sometimes when deleting the last email and exiting tmail.
I cannot activate my other email accounts as the Blackberry Browser (I think this is BES) does not load, even after the prompt "The internet connection is currently in use by the BlackBerry browser. Would you like to temporarily disable BlackBerry browsing? Yes/No". Once disabled and refreshed, it still does not connect. I think I read this on cOrnholio's thread.
Sent mail from pc does not redirect mail to the sent mail folder on the D2 but into the inbox instead.
The soft reset problem still exists, but it does at least work. My D2 has now had emails for the last 3 days.... Fortunately the D2 is more stable than the D1 so soft resets are required less often.
My thanks go to gnick and cOrnholio for this. I can now use my D2!
By the way, I have made some simple shortcuts which make the process following a soft reset simpler:
Add shortcut to BBMain.exe to the start menu
Add shortcut to MemMaid to the start menu
Set MemMaid to re-open at same page in Advanced Settings
A couple more tips for new people at this:
Be patient. Sometimes you can try the same solution more than twice and get different results
Be patient. The IP Address and PIN don't always appear immediately.....
Regards
Hi All,
Me too.
I got it working. I followed the same tips on this thread and on the one by cOrnholio with the following notes:
AKU set to .1.6.1
BBC version 104 worked.
Orange Romania.
Everything is ok !
mitsi said:
By the way, I have made some simple shortcuts which make the process following a soft reset simpler:
Click to expand...
Click to collapse
Hello mitsi, setting the "Launch130" key in the registry to EnableBBCTopaz.exe as described in the instruction in the first posting should ensure that EnableBBCTopaz.exe starts automatically befire BBC. This is the "clever" way to autostart it without doing any manual work. If it doesnt autostart, that could mean that you have a spelling error in the regkey name, regkey value, or that you havent placed the file in the \windows folder.
gnick said:
Hello mitsi, setting the "Launch130" key in the registry to EnableBBCTopaz.exe as described in the instruction in the first posting should ensure that EnableBBCTopaz.exe starts automatically befire BBC. This is the "clever" way to autostart it without doing any manual work. If it doesnt autostart, that could mean that you have a spelling error in the regkey name, regkey value, or that you havent placed the file in the \windows folder.
Click to expand...
Click to collapse
Hi gnick,
I must admit, I haven't checked this, but I have had problems before with Blackberry. Because our IT Dept in their wisdom have set the security to lock the phone after 60 minutes of inactivity, I keep having to unlock it. I have a Mortscript programme which does this for me thanks to EdSub, but it would appear that Blackberry takes a higher pecking order after a soft reset so the Mortscript isn't activated before Blackberry, no matter how I try to configure it. Therefore, I suspect Blackberry will start before your programme too, so it would then think the phone is a D2 instead of a Rafael immediately after soft reset.....
If your Blackberry has the Security Policy set by your IT Department, you too may have this issue, but otherwise, it may be possible to start your programme before Blackberry starts.
Isn't it all rather silly??? The things we do to get our phones to our liking eh???
Hi !
thanks for this thread !
it seems to work for me, (appear as raphael
done in a minute...now waiting my PIN
how long does it takes ?
regards
cédric
tsetse_fr said:
Hi !
thanks for this thread !
it seems to work for me, (appear as raphael
done in a minute...now waiting my PIN
how long does it takes ?
regards
cédric
Click to expand...
Click to collapse
It shouldn't take longer than a few minutes. You may be able to help it on it's way by going into Blackberry settings, then in the Utility tab, press "Register Now". Then if you go to the Identy tab your PIN and IP address should appear hopefully.
nothing appens when i press "activate now "....
same probleme with a touch hd ...Bes account has been reset ...but pin and ip still pending
i'll wait ...
want a good new : already broke my digitizer yesterday :s got to change it ...
News from HTC
Hi All,
For your information, I sent the following question to HTC:
"Dear Sirs, I have an HTC Touch Diamond 2. I have requested information before on how to get Blackberry Connect working on this phone but had the response "we don't support third party applications". This is fair enough, but please see this link: http://www.htc.com/sea/SupportViewNews.aspx?dl_id=497&news_id=61. If you support this on other HTC phones, then why not the Diamond 2? Do you have plans to develop this further? I would appreciate your help/comments on this please."
I received this response from HTC:
"New Response From [ Mike (EU team) ]
Hi Paul,
The link you found is for Asian devices, not European ones.
Blackberry Connect is not supported by HTC Europe and there are no plans to release the 3rd party application or test its compatibility.
Please contact Research In MOtion to see if there is compatible version for your device.
Best Regards
Mike"
Hopefully they will change their minds in the future. Has anyone tried RIM?
mine worked 2 days later
had to wait only because my orange data network was pending ...
now it works perfectly