Related
Does anyone know how to fix this? Or what's caused this?
Really don't want to have to hard reset and reinstall apps one by one!
Referring to the "Call Hi..." bit on the bottom left. It's overlaying the video call toggle.
Cheers.
got the same problem, appeared after installing the hotfixes just 5 minutes ago.
I got that too after the hotfix install. I uninstalled the hotfixes but it still shows there.
Now if I try to install again it says "please use the correct version to install this hotfix"
I guess it didnt actually uninstall it
Installed that hotfix as well & can't reinstall it after uninstall.
Just looking through the hotfix exe's to see what its changed.
same here now i have to do hard reset?
Have the same problem.
I restored to an earlier backup.
Because even after UnInstalling the hot fix the text remains.
No probleme on french rom whit this hotfix .
Same as everyone else. Just noticed it when I went to make a phone call.
\Windows\Incall_02_B.bmp
\Windows\phcanhtc.dll
\Windows\rilphone.dll
\Windows\HTCLTB.png
\Windows\18c460d8_manila
These are the files from the two hotfixes.
If you:
1. Uninstall both hotfixes
2. Do a full backup with SPB backup or similar.
3. Do a hard reset.
4. Restore the backup but customise it so as to not restore the above five files.
It should go back to normal. Worked for me anyway.
jcinfo said:
No probleme on french rom whit this hotfix .
Click to expand...
Click to collapse
Also no problem with German Rom and hotfix
Did UK users install UK version?
Can I check if the UK users experiencing problems downloaded the SLIDER fix from the HTC UK website or from the post in the forum which pointed to the HTC German website.
Please could you all respond.
Hello,
I am a UK user with ROM 1.14. Downloaded from the UK site from the European server. I have the "Call Hi" problem, but to be honest, I use the call history more than video calling, so apart from the icon looking bad, its done me a favor. If it was possible to make just that button look better, I would be very happy with its functionality. Video calling is still accessible from the menu.
same problem here.
the hot fixes are system fixes, when you uninstall, you are only removing the entries from the "remove programs" list, but the changes are not reversed. that's why it is not fixing the problem.
my only question is: which of the hot fixes caused this? I installed all three, and I know it's not the system freeze fix, because i installed that long time ago.
Phone Slider Fix
Juggler258 said:
Hello,
I am a UK user with ROM 1.14. Downloaded from the UK site from the European server. I have the "Call Hi" problem, but to be honest, I use the call history more than video calling, so apart from the icon looking bad, its done me a favor. If it was possible to make just that button look better, I would be very happy with its functionality. Video calling is still accessible from the menu.
Click to expand...
Click to collapse
Hi Guys
I agree with Juggler258, it looks ugly but for me this is better functionality as well as I do not use video call! Peverse or what!!
OK - tried this a few times and unsure whether the slider is any better.
KaidM
buggybug0 said:
my only question is: which of the hot fixes caused this? I installed all three, and I know it's not the system freeze fix, because i installed that long time ago.
Click to expand...
Click to collapse
The slider hotfix.
i made a new thread about this problem, sorry about that.
It is annoying cause i want to make Video calls but now i can't because of this stupid hotfix.
Howcome HTC didn't saw this. I mean it's not some hidden bug - it's on the main screen come on.
@OFFTOPIC
The other day I sent their support an email about Flash and futer touchflo development. The answer was so lame I still don't have any clue.
It's not their job about flash,... they don't know at least not in the helpdesk blablabla.
Nokia offered me cool firmware updates and improvements - I hope HTC works that way too. Not just hotfixes.
Apparently HTC fixed this issue with the hotfix and video call problem. See this post.
EDIT: I just tried it and it works fine. Link to this HTC hotfix here.
Hey guys,
Right now my Leo is unable to launch HTC sense after I did a soft-reset after modifying the registry "Change - CacheSize to 4096" gotten from the Leo Hints & Tips thread as well as uninstalling Nimbuzz.
Also I also created a shortcut for Task Manager to put into the start menu and added it to the Manilla shortcut at the main page.
A couple of soft-resets still doesn't solve it, and sometimes it will say tap here to start HTC Sense but tapping doesn't do anything. Able to open the dialing menu but takes quite awhile.
Pressing the contacts menu gives the error message "The file "contacts" cannot be opened. Either it is not signed with a trusted cert, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
Any ideas?
Got the same problem.
Duttys HD Holy Grail
I tried to reinstall the rom but I can't connect with usb.
did you try that?
same problem here.
rom is 1.48 from stock.
also had the unable to launch sense error, couldnt find a way to solve it so i had to hard reset (AGAIN!!)
having to link 90 contacts with facebook manually sucks!
Does anyone have been able to solve this problem? I faced it today, I was doing some tweaks to my HD2, did some soft resets but then sudenlly it stops working, Sense freezes and has been unable to launch it, sometimes I can access to start menu but I can't load anthing, every link I tried to open tells me that the file cannot be opened either it's not signed or one of its components cannot be found. Nothing but the phone can be opened.
My rom is 1.48 stock.
Is the only solution for this a hard reset?
vhjc said:
Does anyone have been able to solve this problem? I faced it today, I was doing some tweaks to my HD2, did some soft resets but then sudenlly it stops working, Sense freezes and has been unable to launch it, sometimes I can access to start menu but I can't load anthing, every link I tried to open tells me that the file cannot be opened either it's not signed or one of its components cannot be found. Nothing but the phone can be opened.
My rom is 1.48 stock.
Is the only solution for this a hard reset?
Click to expand...
Click to collapse
I faced similar problem before if I added the tweak of FATFS=4096. I did "hard reset" and then reinstalled all stuffs. I reinstalled all programs and readded the tweaks except FATFS one. The phone resumes normal.
It seems to me that the tweak of FATFS may not work on HD2.
Yes, actually I managed to remove that tweak without hard reset it, reverted it to FATFS=0 and everything came back to normal, my HD2 is now like it was before.
We MUST warn every HD2 owner to not apply this tweak.
I've cautioned this particular tweak on the main thread before.
changing the FATFS would hanged the HD2 (ROM: 1.48 Asia Region) and you'll need to hard reset to revert to the default settings.
Ohhh I didn't see that...
Thanks calyon!
vhjc said:
Yes, actually I managed to remove that tweak without hard reset it, reverted it to FATFS=0 and everything came back to normal, my HD2 is now like it was before.
We MUST warn every HD2 owner to not apply this tweak.
Click to expand...
Click to collapse
HOw you do that?!
First I disabled HTC Sense from Home, then I move to the top of the start menu the registry editor (in my case it's SKTools Registry Explorer), then I turned it off and on several times and every time I tried to run the registry editor, when I was unable to run it I turned it off and on again, until I was able to run the registry editor, then navigated to HKEY_LOCAL_MACHINE\System\StorageManager\FATFS and changed back the FATFS to 0.
I don't know how many times I've had to turn it on and off, but I thinks it's better than do a hard reset, specially if you don't have a backup or your data.
vhjc said:
First I disabled HTC Sense from Home, then I move to the top of the start menu the registry editor (in my case it's SKTools Registry Explorer), then I turned it off and on several times and every time I tried to run the registry editor, when I was unable to run it I turned it off and on again, until I was able to run the registry editor, then navigated to HKEY_LOCAL_MACHINE\System\StorageManager\FATFS and changed back the FATFS to 0.
I don't know how many times I've had to turn it on and off, but I thinks it's better than do a hard reset, specially if you don't have a backup or your data.
Click to expand...
Click to collapse
I confirm... This is working!
(considering you have a reg editor already installed of course)
Thank you very much vhjc... you saved all of us lots of painfull time!
Hello,
I just changed the FATFS registry value to 4096 based on the tweaks hint & tips and now my HD2 hangs and couldn't launch the HTC Sense app. Reading the responses above, it seems that it's possible to disable HTC Sense from Today setting in this kind of condition. However no matter how I tried to click on the "Setting" icon on the Start Menu screen, I only got the error window saying that the program is missing and we need to restore or reinstall... I couldn't connect the device to my laptop thru activesync to remove the registry since the activesync app (the switcher between storage device & activesync window) failed to load as well...
Could you please share how did you manage to go to the Today setting window to disable the HTC Sense? I couldn't see any other options since no other shortcuts are available, nor I can run any app from the start menu Is there a way to load HD2 standard WinMo OS in safe mode only...?
I'm really desperate on this situation and as much as possible I don't wanna hard reset my HD2 since I haven't done any backup yet...
Please help... Thank you very much in advance!
cheers
Im getting the unable to launch htc sense message too, even after a hard reset the problem re-occurs. can anyone advise me what to do??
Sorry, should have mentioned this above, I have not changed the registry setting of fatfs to anything other than 0, so this is not whats causing this problem for me. I have tried using a reg editor ro confirm the setting is 0 still no luck.
before the problem occurs i get an error reporting message saying theres been a problem with manila.exe
Any help pleeeease....
conantroutman said:
Im getting the unable to launch htc sense message too, even after a hard reset the problem re-occurs. can anyone advise me what to do??
Click to expand...
Click to collapse
I have just encourntered the very same problem with HTC Sense - and I have not changed anything on my phone for days, if not weeks...
Anyone????
I have just encourntered the very same problem with HTC Sense - and I have not changed anything on my phone for days, if not weeks...
Click to expand...
Click to collapse
Me too. I wasn't even using the phone when I got an error reporting message about manilla. Several soft and 1 hard reset but sense still cannot load.
4braid said:
Me too. I wasn't even using the phone when I got an error reporting message about sense. Several soft and 1 hard reset but sense still cannot load.
Click to expand...
Click to collapse
Literally just in the last hour or so?
Something very odd is going on here...
The same happened to mine 2 hours ago. Didnt make any changes to the device or installed any software etc Tried soft resets but no joy
Im considering a hard reset unless someone has a fix please
Mine has done exactly the same thing!! was working fine earlier on the way home from work, went to check it about 6pm and it had locked saying a problem with Manilla.exe had occurred... couldn't get it to do anything so took out the battery and ever since HTC sense wont load..
Everything seems fine, al programs work, phone is ok etc just sense wont load, was just about to do a hard reset after backing up data and removing card when i read this post so stopped...
Has anyone else had this?....
Hi all, I have recently changed my HTC HD for an HTC HD2, but nearly immediately, still without adding any thirdy party program I am nearly systematically facing with the following problem
I am failing opening the received emails (using Microsoft Excange Server Setting) using HTC Sense (i.e. I mean by clicking on the e-mail).
The only way to read emails is then go to the email tab then select ALL from the left bottom corner and then press one of the email in the proposed list to read/open it. This is my actual configuration:
OS = 5.2.21869 (21869.5.0.82), Manila = 2.5.192116190, ROM = 1.48.408.1 (71294) ITA, ROM Date = 11/16/09,Radio = 2.05.51.05_2, Protocol = 15.28.50.07U.
Can someone help me ?
Many thanks in advance for your kind support ))
Cheers,
Max
I am experiencing the -exact- same problem.
Going to the email tab and tapping on the envelope on the screen does nothing. I can see that it registers the tap, since the envelope 'bounces'. The email doesn't open up like it normally would though.
I have no clue why this keeps hitting me :S I have tried hard resetting 4 times, and it keeps happening.
Someone please provide some insight in to what is breaking in Sense when it comes to the 'open email' functionality.
OS: 5.2.21869 (21869.5.0.82)
Manila: 2.5.19211619.0
ROM: 1.48.403.1 (71294) DAN
ROM Date: 11/20/09
Radio: 2.05.51.05_2
Protocol: 15.28.50.07U.
Tap Start, then Lock. Unlock your device and hopefully bug is gone (till it next appears and you redo the steps).
This very bug has appeared with 1.48 ROMs...
Together with another bug: The lockscreen did not work unless you would force the device to lock using the soft button from the start menu.
Once done, the lockscreen bug plus the mail not opening bug magically disappeared, but I have not seen any thread so far with a clear explanation for the exact reason...
It fixed
tnyynt said:
Tap Start, then Lock. Unlock your device and hopefully bug is gone (till it next appears and you redo the steps).
Click to expand...
Click to collapse
Well I don't know what this will do...but what ever it fixed the issue, I never had that issue with version 1.43 and I have updated ROM to 1.48...did that bring in that bug ?
tictac0566 said:
This very bug has appeared with 1.48 ROMs...
Click to expand...
Click to collapse
I've had this on my stock 1.43 too.
tnyynt said:
Tap Start, then Lock. Unlock your device and hopefully bug is gone (till it next appears and you redo the steps).
Click to expand...
Click to collapse
Wow, it worked. Can't believe it was that simple. I guess this will be fixed by HTC in the next ROM update. Seems to be related to the autolock when you put the device in standby, which explains the randomness to some extent...
Thanks tnyynt!
Hi guy, let me try then I was becoming crazy as I did several hard resets attempting to identify which (installed) programs may generate this issue, so installing one by one, resetting etc. but without effect. Suddenly the problem re-appears ... I will re-install everything and let you known accordingly. Anyway just for your info I have opened an official ticket on HTC website about this topic: they suggested me to reset, install latest hotfixes and the new ROM, that today seems to be disappeared from the site, but obviously they did not solve my issue yet :-(
tnyynt said:
Tap Start, then Lock. Unlock your device and hopefully bug is gone (till it next appears and you redo the steps).
Click to expand...
Click to collapse
Massimiliano_C said:
Hi guy, let me try then I was becoming crazy as I did several hard resets attempting to identify which (installed) programs may generate this issue, so installing one by one, resetting etc. but without effect. Suddenly the problem re-appears ... I will re-install everything and let you known accordingly. Anyway just for your info I have opened an official ticket on HTC website about this topic: they suggested me to reset, install latest hotfixes and the new ROM, that today seems to be disappeared from the site, but obviously they did not solve my issue yet :-(
Click to expand...
Click to collapse
Same here, I even Hard reseted my phone twice, and was going to do it again...
Thanks a lot, tnyynt...
Hi guys, I have terminated the re-installation of all my preferred software but this time, following tnyynt indications, before all I have installed the following CAB I found here: "Touch X autolock disable". As result, during the installation of each program and in the end once terminated the restoring of all my preferred applications it seems the problem does not occur anymore so apparently without the need to do the trick suggested by tnyynt. I would you suggest to try ... just in case it works for you too Thanks again tnyynt
Massimiliano_C said:
Hi guys, I have terminated the re-installation of all my preferred software but this time, following tnyynt indications, before all I have installed the following CAB I found here: "Touch X autolock disable". As result, during the installation of each program and in the end once terminated the restoring of all my preferred applications it seems the problem does not occur anymore so apparently without the need to do the trick suggested by tnyynt. I would you suggest to try ... just in case it works for you too Thanks again tnyynt
Click to expand...
Click to collapse
Arfff...your cab is for the screenlock...
Not this Mail problem...
thanks some times problems like this can get you crazy!
Having the same problem here right after I installated 20ShortCuts.....
euror said:
Having the same problem here right after I installated 20ShortCuts.....
Click to expand...
Click to collapse
But you've obviously read the whole thread and therefore know how to fix the issue?
Just come across this issue a few days back, but with a twist -
Firstly the lock/unlock fix detailed on the previous page does not work for me, nor a soft reset. I am loathe to hard reset, since I am suffering none of the other issues many people are (sms etc).
As described on the previous page; on the email tab of HTC Sense the email does register the request to open, as it "bounces" when tapped, but will not open in poutlook.
I noticed it, but wrote it off as one of the many quirks of these phones, expecting all to be well in a few hours. But after almost a week I noticed I was not receiving mail at all. Wanting to check the settings, I opened Pocket Outlook via the start menu, and found that all of my mail accounts had disappeared! Leaving the default outlook demo account only. But I can still view and scroll through (but not open) existing mail via Sense.
I know I am going to have to HR, but I am curious to know if anyone else has suffered the issue, and if a trigger/solution has been found.
MailAccountRepairProgram
In the case of damaged Mail-Accounts u can try this Program before Hardresetting... Quite easy and works 100%
elburna said:
In the case of damaged Mail-Accounts u can try this Program before Hardresetting... Quite easy and works 100%
Click to expand...
Click to collapse
Thanks, never seen this program before. It worked, to a degree. It restored my folders to Poutlook, but the restored accounts have lost the connection settings (pop,smtp). I think that was user error though
Thanks for taking the time to upload
I should have said, that this prog is mainly for making lost accounts visible again in order to delete them afterwards with the same prog (like in the case when they where visible in manila but not in outlook). Never tried to use a repaired account again (always deleted them and created a new one). But if you say, you only needed to reenter the connection-settings... nice to know that this works
Same Problem in my Verizon Rhodium Wit March 7th Energy Maxmanila ROM
same problem for me. I even tried hardreseting and reinstalling the rom witjout any succes. The lock Unlock suggestion doesn´t work for me. Any clue?
HTC sense mail issue problem
I tried the Chrisd1a1 Solution in:
http://forum.xda-developers.com/showthread.php?p=5442905#post5442905
EMAIL ISSUE FIX
Go the following Key:
[HKEY_LOCAL_MACHINE\System\Inbox\Templates\IPM\Note]
Change the following value from:
"Read"="\\Windows\\HTC_read_note.htm"
TO:
"Read"="\\Windows\\read_note.htm"
change Compose to:
"Compose" = \\Windows\compose_note.htm"
And Is not working either.
Any clue???
Hi
I have a problem. My HTC TC2 is disconnected when is in stanby. I try to change register HKLM\Comm\BCMSDDHD1\Parms\ There I change HTCKeepWifiOnWhenUnatteded from 0 to 1, but when I shutdown the device the value is rewrite and there is 0. Also I try Rhodium Setting tools and problem is same. Im desperate.
knezka said:
Hi
I have a problem. My HTC TC2 is disconnected when is in stanby. I try to change register HKLM\Comm\BCMSDDHD1\Parms\ There I change HTCKeepWifiOnWhenUnatteded from 0 to 1, but when I shutdown the device the value is rewrite and there is 0. Also I try Rhodium Setting tools and problem is same. Im desperate.
Click to expand...
Click to collapse
Try this cab out...it works for me just fine, keeps my wifi live even when the phone goes into standby/sleep.
sirphunkee said:
Try this cab out...it works for me just fine, keeps my wifi live even when the phone goes into standby/sleep.
Click to expand...
Click to collapse
Thanks . The problem solved.
Tested
Many thanks, it's sloved on HTC Touch Cruise P3650
regards,
I'm using TMOUS stock 6.5 rom & have the same issue too. I changed registry HKLM\Comm\BCMSDDHD1\Parms\HTCKeepWifiOnWhenUnatteded from 0 to 1.
This works till I reboot. After reboot, the above registry value resets to 0.
Sirphunkee, Isn't the cab you attached, also setting the same registry? If yes, then how'll it work across reboots?
see_u_then said:
I'm using TMOUS stock 6.5 rom & have the same issue too. I changed registry HKLM\Comm\BCMSDDHD1\Parms\HTCKeepWifiOnWhenUnatteded from 0 to 1.
This works till I reboot. After reboot, the above registry value resets to 0.
Sirphunkee, Isn't the cab you attached, also setting the same registry? If yes, then how'll it work across reboots?
Click to expand...
Click to collapse
I was under the impression that's the regedit it makes (I don't have the tools here to check that at the moment), but for whatever reason it seems to make it stick where doing it manually doesn't...just based on how many people it's worked for
I applied all of the stuff mentioned by royalbloodvi in another thread here:
[Solution] MUST-HAVE For X2 Users! Speed Tweaks & How to Disable "Slideview" & Panels
So anybody, that finds those tips useful enough for him, should go with those. My problem was, that even when I applied all of the stuff, phone was still laggy, had some SOD's, sometimes turned off by itself etc. Since there is still no official note from SE about MR2, I was desperately looking for an answer. Creation of X2 subforum made my search easier, after browsing some topics, I gathered all the info, and to make it easier for you, I exposed it in this topic.
All the credits go to the topic starters in here, once again, I just gathered and compiled the info:
Xperia X2: How to change language (re-flash an Stock Spanish ROM), dreamcrawler for translation and originating tips, gbajzelj for the final idea and ultrashot and lollylost100 that provided the X2 software cabs.
***********************************
Procedure:
1) Open SEUS (SonyEricsson Update Service), start a new update. EVEN IF IT SAYS YOU HAVE LATEST VERS, UPDATE IT ANYWAY.
Another version: click on Start/Settings/System/Clear phone memory, enter all the needed info. It will put phone back into original state (MR1 - since you updated your phone to that version)
2) ONCE IT REBOOTS, CALIBRATION SCREEN APPEARS. RIGHT AFTER CLICKING ON THE CROSSES, IT WILL APPEAR THE SONY ERICSSON LOGO, AND IT WILL START APPLYING THE CABS. PUSH THE RESET RIGHT after it starts applying (hidden behind the stilus, opening the battery cover).
3) After rebooting, the Sony Logo will appear again asking to retry. Press NO. Well by default this will keep on showing up every time you restart the phone, and it will also reset your time & date setting to some time in March. But I found a solution for that. With registry editor of your choice, search for Launch190 (HKLM\init\Launch190\CustAppInstaller.exe). Delete that value, and phone won't ask you again if you want to retry the CABS instalation, also it won't change your Time & Date setting again!!
IMPORTANT: After that, phone returns to original WIN 6.5.2 state, without BUGGY SE stuff. At that point, phone is usable, stable and fast. You will have about 220 MB of free space on your phone.
Now you can go further by installing some of the SE stuff, but this is all up to you, since I don't exactly know, which one causes the problems (except for SlideView and TileWave panel, as was stated in some other posts). Grab the X2 Program cab's here: R1BA023_Original_Cabs
Put the extracted cabs on your SD card, insert it into the phone, and install stuff you want. I installed those packages:
SEMCFlashDeployment.cab
SonyEricssonDialer_1.1.0.996_vulcan_generic.cab -> New Vulcan Dialer
TaskManagerSetup.cab -> Task Manager, obviously
Camera_R109_RC1_38986.cab -> necessary for Camera
CommManagerCab.cab -> Communication Manager
FastGPSSetup.cab -> without this GPS won't work, at least did not work in my case
JMMS_Ver4.5.113_26Feb10_SE_PPC.cab -> reminded by rsx19, this one is needed for MMS
After installation of those, restart the phone. At that point around 200 MB of storage space is left, and around 120 - 130 MB of ram left. Although, it is not necessary to install all of those cabs (except for Camera, which I think is needed, unless you don't want to use camera ), it is all up to you.
Also, since you requested, I'll put down some of the cabs that are needed for different settings. But keep in mind, I am not sure if anyone of those cabs make any troubles or instability. So If you find any trouble or instability after some cab was installed, let us know and together we might find some useful solution.
Ok, to install some of the aditional setting in Setting menu, first install MyCPLSetup.cab, as I discovered, this one is neccessary for following CABS for various settings:
MobileData.cab -> for mobile data settings (HSDPA, ..)
ClearStorage.cab -> installs Clean Phone Memory
PhoneSettings.cab -> updates the Phone in Settings/Personal
SetupSNM.cab -> installs new Sounds & Notifications under Settings/Personal..
For the Illumination to work, install those 2 cabs:
IlluminationSvc.cab
PatternsSetup.cab -> SE Illumination Patterns, don't forget to restart phone after you install those two, and go back to Sounds & Notifications to set the illumination for various events.
After you install those cabs (not necessary to install them all, it's up to you) restart the phone and options will show up in Settings or desired category.
Don't forget, when you finish with installation of cabs, do a restart / soft reset of the phone, since some changes may not show until a restart / soft reset is done!
Using the phone with Windows Default theme, it runs smooth. Also battery life so far seems to be improved, but will have to run it few more days to tell the difference.
So far, my phone is lightspeed fast and, which is more important - stable!! You can now also try to apply settings, royalbloodvi provided in this thread - maybe you get even better performance:
[Solution] MUST-HAVE For X2 Users! Speed Tweaks & How to Disable "Slideview" & Panels
Ok, some are still having problems with SD cards being unrecognized or disappearing, here is the patch: SD Card Fix
Accelerometer based rotation:
If you loose the rotation during the setup of CABS, and you still want to use it, this is how you turn it back on: with registry editor open (HKLM\Services\MultiService\mods\Rotation\AccelBasedRotationEnabled). If your rotation is gone, this key has the 0 value. Change it to 1 and you get your accel based rotation back. I have yet to find out, which cab disables it!
I'd like that you people give feedback in here, which CABs are safe and needed to install apart from those I (originally gbajzelj) posted.
PS
I personally don't like the idea of stripping the phone down to the bone to make it work. If you buy a new car, it works as it was send out of the factory..you don't need to unscrew half of the engine, disable the steering, take out the seets to make it work. Same is with computers, just everything. But until MR2 comes out and hopefully repairs all the damage that was done with MR1, this is the solution for me.
Also thanks to everyone helping to make this phone less bugy and somehow usable
lyteo said:
...
I also installed SPB Mobile Shell 3.5.3, which works flawlessly on this fresh install.
...
Click to expand...
Click to collapse
After instalation of SPB Mobile Shell my GPS stop working. The only way to restore GPS working was to reflash mobile phone.
spasoft said:
After instalation of SPB Mobile Shell my GPS stop working. The only way to restore GPS working was to reflash mobile phone.
Click to expand...
Click to collapse
Hm, I tried and my GPS was also unresponsive, so I installed FastGPS and it helped!
its gbajzelj not gbanzelj ) np.
When i installed spb 3.5.3 and reloded weather info then when i turned off the phone and turned it on again the weather data was not saved and the wireless or data conscction did connect but did not load no new data from weather server. Skyfire did load the pages (the connection i guess did work) but spb shell did not load the weather data anymore.
i would also like if anione can make the camera button to open the camera app withouth the slideview. maybe a simple cab file just to set the camera button.
Sorry for typo
Does it ask you every time you restart the phone if you want to continue with setup?
If it does, did you notice that it resets the date? Thats a problem I'm trying to solve now Every time my phone restarts, date is set to 17. March -> maybe thats why your weather data is not reloaded??
For me, when I press the Camera button it opens the CameraApp. I installed only Camera Cab as you sugested, no SlideView, and it works!
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
royalbloodvi said:
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
Click to expand...
Click to collapse
It think you have to install MobileData.cab & MyCPLSetup.cab
And one question for you all, does phone ask you to continue with CAB installation every time when you restart it? And resets the date?
lyteo said:
Looking into your answer right now...remind me, in which menu that setting use to be, I forgot already...
And one question for you all, does phone ask you to continue with CAB installation every time when you restart it? And resets the date?
Click to expand...
Click to collapse
1) Settings -> Connections -> Mobile Data -> HSDPA Disable
2) Yes, it always asks to retry installing the CAB PLUS resets the date PLUS time all the time.
Just noticed it the time & date bug, this really bothers me =S
I just realised a lot of the cabs like clearphonememory cab doesnt show up in the start menu like mobiledata..
royalbloodvi said:
Nice! This works perfect in conjunction with my other thread!
I have one question though for battery life issues: Which cab do I install to be able to turn off HSDPA? I've tried installing mobiledata cab but it doesnt show up..
Click to expand...
Click to collapse
royalbloodvi said:
1) Settings -> Connections -> Mobile Data -> HSDPA Disable
2) Yes, it always asks to retry installing the CAB PLUS resets the date PLUS time all the time.
Just noticed it the time & date bug, this really bothers me =S
I just realised a lot of the cabs like clearphonememory cab doesnt show up in the start menu like mobiledata..
Click to expand...
Click to collapse
About the Time & Date bug, I think every time the phone starts as after I made MR1 update...so we must somehow find what is telling the phone that the software is not installed (if we trick the phone that is was fully updated and will not ask for retry at startup, this date & time bug will probably go away) - solution found, check first post
About missing things in Settings, I think it is all connected with MyCPLSetup.cab solution found, check first post
ok so the ACCELEROMETER WAS WORKING when i reset the phone, but once i installed everything you listed, auto rotate stopped working. what can i do to get it back? i really dont want to go back through the process again
Also which cab is 'sounds and notification' the one i have now doesnt have as many settings as before, and also which cab is for the optical pad.
rsx19 said:
ok so the ACCELEROMETER WAS WORKING when i reset the phone, but once i installed everything you listed, auto rotate stopped working. what can i do to get it back? i really dont want to go back through the process again
Also which cab is 'sounds and notification' the one i have now doesnt have as many settings as before, and also which cab is for the optical pad.
Click to expand...
Click to collapse
You don't need to reinstall, just check the first post, I updated it with solution for that - you just have to change one registry setting!
For Sound & Notification settings install SetupSNM.cab! For the Optical I have yet to find out, I'm doing my best, but can't be that fast I guess I did about 10 reinstalls and about 100 restarts of the phone today
awesome, do you know which one is auto time update
rsx19 said:
awesome, do you know which one is auto time update
Click to expand...
Click to collapse
You mean the Timezone tab in Phone settings? When it automaticly changes time due to time zone change?
In this case it would be:
TimezoneSvcSetup.cab
well like, before there was a auto time update check box, now i cannot find it, and ill install the right now and hopefully your right :]
EDIT, i still do not see auto time update
also does the SetupSNM.cab also include everything needed for the lights?
EDIT ALSO, add to your list since i assume most people use mms JMMS_Ver4.5.113_26Feb10_SE_PPC.cab for mms
What is 'settingspart1, settingspart2' are those extended settings?
rsx19 said:
well like, before there was a auto time update check box, now i cannot find it, and ill install the right now and hopefully your right :]
EDIT, i still do not see auto time update
also does the SetupSNM.cab also include everything needed for the lights?
EDIT ALSO, add to your list since i assume most people use mms JMMS_Ver4.5.113_26Feb10_SE_PPC.cab for mms
What is 'settingspart1, settingspart2' are those extended settings?
Click to expand...
Click to collapse
Maybe you know where that Auto Time Update setting was? And if you restarted the phone, after installation?
For the Illumination, check first post
Thanks for the reminder on MMS, will add it now!
For the settingspart1 & 2, I have to check don't know yet
thankss a soft reset helped, and idk what settings1/2 do either
as for the sd card fix, it is needed, because my sd card went missing and when i went into the registry to fix it it was just like before and had to change the values to '0'
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"shc1:"=dword:00000000
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"shc1:"=dword:00000000
also my phone doesnt vibrate, if i press preview it works but when i actually get a call/text it doesnt vibrate
X2 phone Signal Pick up Weak
My X2 with T.MOBLE service , my phone keep lost signal , anytime I want to cal or some time have call in ,I have go uot side or around the house try to locate where I can have good Signal,any one can help me ,Please tell me how to deal with ,I did check those 2 metal under the cover,and clean it very good ,still same,verry weak signal,no change
rsx19 said:
thankss a soft reset helped, and idk what settings1/2 do either
as for the sd card fix, it is needed, because my sd card went missing and when i went into the registry to fix it it was just like before and had to change the values to '0'
Code:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Suspend]
"shc1:"=dword:00000000
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming]
"shc1:"=dword:00000000
also my phone doesnt vibrate, if i press preview it works but when i actually get a call/text it doesnt vibrate
Click to expand...
Click to collapse
Did you went back to the Sounds & Notifications and selected vibration? Becouse at the moment, only cabs I have installed are:
MYCPLSetup, SetupSNM, IlluminatonSVC and PatternsSetup, and illumination & vibration works for me. Or do a soft reset again, it might help.
nguyennghiep said:
My X2 with T.MOBLE service , my phone keep lost signal , anytime I want to cal or some time have call in ,I have go uot side or around the house try to locate where I can have good Signal,any one can help me ,Please tell me how to deal with ,I did check those 2 metal under the cover,and clean it very good ,still same,verry weak signal,no change
Click to expand...
Click to collapse
Hm, don't know what your are your signal conditions with other phones, mine has a good signal and it does not matter, what I install..
illuminations work and all the settings are set, but still no vibe.